STATIC s32 e1000_init_phy_params_82540(struct e1000_hw *hw);
STATIC s32 e1000_init_nvm_params_82540(struct e1000_hw *hw);
STATIC s32 e1000_init_mac_params_82540(struct e1000_hw *hw);
-static s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw);
+STATIC s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw);
STATIC void e1000_clear_hw_cntrs_82540(struct e1000_hw *hw);
STATIC s32 e1000_init_hw_82540(struct e1000_hw *hw);
STATIC s32 e1000_reset_hw_82540(struct e1000_hw *hw);
-static s32 e1000_set_phy_mode_82540(struct e1000_hw *hw);
-static s32 e1000_set_vco_speed_82540(struct e1000_hw *hw);
+STATIC s32 e1000_set_phy_mode_82540(struct e1000_hw *hw);
+STATIC s32 e1000_set_vco_speed_82540(struct e1000_hw *hw);
STATIC s32 e1000_setup_copper_link_82540(struct e1000_hw *hw);
STATIC s32 e1000_setup_fiber_serdes_link_82540(struct e1000_hw *hw);
STATIC void e1000_power_down_phy_copper_82540(struct e1000_hw *hw);
*
* Adjust the SERDES output amplitude based on the EEPROM settings.
**/
-static s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw)
+STATIC s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
u16 nvm_data;
*
* Set the VCO speed to improve Bit Error Rate (BER) performance.
**/
-static s32 e1000_set_vco_speed_82540(struct e1000_hw *hw)
+STATIC s32 e1000_set_vco_speed_82540(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
u16 default_page = 0;
* 1. Do a PHY soft reset.
* 2. Restart auto-negotiation or force link.
**/
-static s32 e1000_set_phy_mode_82540(struct e1000_hw *hw)
+STATIC s32 e1000_set_phy_mode_82540(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
u16 nvm_data;