/*******************************************************************************
-Copyright (c) 2001-2012, Intel Corporation
+Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
#include "ixgbe_api.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-#ident "$Id: ixgbe_82599.c,v 1.301 2012/11/08 11:33:27 jtkirshe Exp $"
+#ident "$Id: ixgbe_82599.c,v 1.334 2013/12/04 22:34:00 jtkirshe Exp $"
#define IXGBE_82599_MAX_TX_QUEUES 128
#define IXGBE_82599_MAX_RX_QUEUES 128
STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
- bool autoneg,
bool autoneg_wait_to_complete);
STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
- /* enable the laser control functions for SFP+ fiber */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ /*
+ * enable the laser control functions for SFP+ fiber
+ * and MNG not enabled
+ */
+ if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ !ixgbe_mng_enabled(hw)) {
mac->ops.disable_tx_laser =
&ixgbe_disable_tx_laser_multispeed_fiber;
mac->ops.enable_tx_laser =
&ixgbe_get_copper_link_capabilities_generic;
}
- /* Set necessary function pointers based on phy type */
+ /* Set necessary function pointers based on PHY type */
switch (hw->phy.type) {
case ixgbe_phy_tn:
phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
{
s32 ret_val = IXGBE_SUCCESS;
u16 list_offset, data_offset, data_value;
- bool got_lock = false;
DEBUGFUNC("ixgbe_setup_sfp_modules_82599");
goto setup_sfp_out;
}
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
while (data_value != 0xffff) {
IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
IXGBE_WRITE_FLUSH(hw);
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
}
/* Release the semaphore */
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
- /* Delay obtaining semaphore again to allow FW access */
- msec_delay(hw->eeprom.semaphore_delay);
-
- /* Need SW/FW semaphore around AUTOC writes if LESM on,
- * likewise reset_pipeline requires lock as it also writes
- * AUTOC.
+ /* Delay obtaining semaphore again to allow FW access
+ * prot_autoc_write uses the semaphore too.
*/
- if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
- ret_val = hw->mac.ops.acquire_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- if (ret_val != IXGBE_SUCCESS) {
- ret_val = IXGBE_ERR_SWFW_SYNC;
- goto setup_sfp_out;
- }
-
- got_lock = true;
- }
+ msec_delay(hw->eeprom.semaphore_delay);
/* Restart DSP and set SFI mode */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
- IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL));
-
- ret_val = ixgbe_reset_pipeline_82599(hw);
-
- if (got_lock) {
- hw->mac.ops.release_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- got_lock = false;
- }
+ ret_val = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+ false);
if (ret_val) {
DEBUGOUT("sfp module setup not complete\n");
setup_sfp_out:
return ret_val;
+
+setup_sfp_err:
+ /* Release the semaphore */
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /* Delay obtaining semaphore again to allow FW access */
+ msec_delay(hw->eeprom.semaphore_delay);
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @locked: Return the if we locked for this read.
+ * @reg_val: Value we read from AUTOC
+ *
+ * For this part (82599) we need to wrap read-modify-writes with a possible
+ * FW/SW lock. It is assumed this lock will be freed with the next
+ * prot_autoc_write_82599().
+ */
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+ s32 ret_val;
+
+ *locked = false;
+ /* If LESM is on then we need to hold the SW/FW semaphore. */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ *locked = true;
+ }
+
+ *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ * previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ */
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ /* We only need to get the lock if:
+ * - We didn't do it already (in the read part of a read-modify-write)
+ * - LESM is enabled.
+ */
+ if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ locked = true;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ ret_val = ixgbe_reset_pipeline_82599(hw);
+
+out:
+ /* Free the SW/FW semaphore as we either grabbed it here or
+ * already had it when this function was called.
+ */
+ if (locked)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+ return ret_val;
}
/**
DEBUGFUNC("ixgbe_init_ops_82599");
- ret_val = ixgbe_init_phy_ops_generic(hw);
+ ixgbe_init_phy_ops_generic(hw);
ret_val = ixgbe_init_ops_generic(hw);
/* PHY */
mac->ops.get_device_caps = &ixgbe_get_device_caps_generic;
mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic;
mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.prot_autoc_read = &prot_autoc_read_82599;
+ mac->ops.prot_autoc_write = &prot_autoc_write_82599;
/* RAR, Multicast, VLAN */
mac->ops.set_vmdq = &ixgbe_set_vmdq_generic;
mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic;
+ mac->ops.get_rtrup2tc = &ixgbe_dcb_get_rtrup2tc_generic;
+
return ret_val;
}
* ixgbe_get_link_capabilities_82599 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
- * @negotiation: true when autoneg or autotry is enabled
+ * @autoneg: true when autoneg or autotry is enabled
*
* Determines the link capabilities by reading the AUTOC register.
**/
s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
- bool *negotiation)
+ bool *autoneg)
{
s32 status = IXGBE_SUCCESS;
u32 autoc = 0;
/* Check if 1G SFP module. */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+#ifdef SUPPORT_1000BASE_LX
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+#endif
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
+ *autoneg = true;
goto out;
}
switch (autoc & IXGBE_AUTOC_LMS_MASK) {
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = false;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = false;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_1G_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_10G_SERIAL:
*speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = false;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_KX4_KX_KR:
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_SGMII_1G_100M:
*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
- *negotiation = false;
+ *autoneg = false;
break;
default:
if (hw->phy.multispeed_fiber) {
*speed |= IXGBE_LINK_SPEED_10GB_FULL |
IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
+
+ *autoneg = true;
}
out:
case IXGBE_DEV_ID_82599_SFP_SF2:
case IXGBE_DEV_ID_82599_SFP_SF_QP:
case IXGBE_DEV_ID_82599EN_SFP:
-#ifdef RTE_NIC_BYPASS
- case IXGBE_DEV_ID_82599_BYPASS:
-#endif
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82599_CX4:
return media_type;
}
+/**
+ * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ * @hw: pointer to hardware structure
+ *
+ * Disables link during D3 power down sequence.
+ *
+ **/
+void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+ u32 autoc2_reg, fwsm;
+ u16 ee_ctrl_2 = 0;
+
+ DEBUGFUNC("ixgbe_stop_mac_link_on_d3_82599");
+ ixgbe_read_eeprom(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+ /* Check to see if MNG FW could be enabled */
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+
+ if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
+ !hw->wol_enabled &&
+ ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
+ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+ }
+}
+
/**
* ixgbe_start_mac_link_82599 - Setup MAC link settings
* @hw: pointer to hardware structure
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /* Disable tx laser; allow 100us to go dark per spec */
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
+ /* Disable Tx laser; allow 100us to go dark per spec */
esdp_reg |= IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /* Enable tx laser; allow 100ms to light up */
+ /* Enable Tx laser; allow 100ms to light up */
esdp_reg &= ~IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
* When the driver changes the link speeds that it can support,
* it sets autotry_restart to true to indicate that we need to
* initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
+ * so, we set the speed then disable and re-enable the Tx laser, to
* alert the link partner that it also needs to restart autotry on its
* end. This is consistent with true clause 37 autoneg, which also
* involves a loss of signal.
{
DEBUGFUNC("ixgbe_flap_tx_laser_multispeed_fiber");
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
if (hw->mac.autotry_restart) {
ixgbe_disable_tx_laser_multispeed_fiber(hw);
ixgbe_enable_tx_laser_multispeed_fiber(hw);
}
}
+
/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Set the link speed in the AUTOC register and restarts link.
**/
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
+ ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
{
s32 status = IXGBE_SUCCESS;
u32 speedcnt = 0;
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
u32 i = 0;
- bool link_up = false;
- bool negotiation;
+ bool autoneg, link_up = false;
DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
/* Mask off requested but non-supported speeds */
- status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation);
+ status = ixgbe_get_link_capabilities(hw, &link_speed, &autoneg);
if (status != IXGBE_SUCCESS)
return status;
goto out;
/* Set the module link speed */
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
/* Allow module to change analog characteristics (1G->10G) */
msec_delay(40);
status = ixgbe_setup_mac_link_82599(hw,
IXGBE_LINK_SPEED_10GB_FULL,
- autoneg,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
return status;
goto out;
/* Set the module link speed */
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
/* Allow module to change analog characteristics (10G->1G) */
msec_delay(40);
status = ixgbe_setup_mac_link_82599(hw,
IXGBE_LINK_SPEED_1GB_FULL,
- autoneg,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
return status;
- /* Flap the tx laser if it has not already been done */
+ /* Flap the Tx laser if it has not already been done */
ixgbe_flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
*/
if (speedcnt > 1)
status = ixgbe_setup_mac_link_multispeed_fiber(hw,
- highest_link_speed, autoneg, autoneg_wait_to_complete);
+ highest_link_speed, autoneg_wait_to_complete);
out:
/* Set autoneg_advertised value based on input link speed */
* ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Implements the Intel SmartSpeed algorithm.
**/
s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
+ ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
{
s32 status = IXGBE_SUCCESS;
/* First, try to get link with full advertisement */
hw->phy.smart_speed_active = false;
for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
goto out;
/* Turn SmartSpeed on to disable KR support */
hw->phy.smart_speed_active = true;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
goto out;
/* We didn't get link. Turn SmartSpeed back off. */
hw->phy.smart_speed_active = false;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
out:
* ixgbe_setup_mac_link_82599 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Set the link speed in the AUTOC register and restarts link.
**/
s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
+ ixgbe_link_speed speed,
bool autoneg_wait_to_complete)
{
+ bool autoneg = false;
s32 status = IXGBE_SUCCESS;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 pma_pmd_1g, link_mode;
+ u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); /* holds the value of AUTOC register at this current point in time */
+ u32 orig_autoc = 0; /* holds the cached value of AUTOC register */
+ u32 autoc = current_autoc; /* Temporary variable used for comparison purposes */
u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- u32 start_autoc = autoc;
- u32 orig_autoc = 0;
- u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
u32 links_reg;
u32 i;
ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
- bool got_lock = false;
DEBUGFUNC("ixgbe_setup_mac_link_82599");
else
orig_autoc = autoc;
+ link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+
if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
}
}
- if (autoc != start_autoc) {
- /* Need SW/FW semaphore around AUTOC writes if LESM is on,
- * likewise reset_pipeline requires us to hold this lock as
- * it also writes to AUTOC.
- */
- if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
- status = hw->mac.ops.acquire_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- if (status != IXGBE_SUCCESS) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto out;
- }
-
- got_lock = true;
- }
-
+ if (autoc != current_autoc) {
/* Restart link */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
- ixgbe_reset_pipeline_82599(hw);
-
- if (got_lock) {
- hw->mac.ops.release_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- got_lock = false;
- }
+ status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+ if (status != IXGBE_SUCCESS)
+ goto out;
/* Only poll for autoneg to complete if specified to do so */
if (autoneg_wait_to_complete) {
* ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true if waiting is needed to complete
*
* Restarts link on PHY and MAC based on settings passed in.
**/
STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
- bool autoneg,
bool autoneg_wait_to_complete)
{
s32 status;
DEBUGFUNC("ixgbe_setup_copper_link_82599");
/* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ status = hw->phy.ops.setup_link_speed(hw, speed,
autoneg_wait_to_complete);
/* Set up MAC */
ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
{
ixgbe_link_speed link_speed;
s32 status;
- u32 ctrl, i, autoc, autoc2;
+ u32 ctrl = 0;
+ u32 i, autoc, autoc2;
+ u32 curr_lms;
bool link_up = false;
DEBUGFUNC("ixgbe_reset_hw_82599");
if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
hw->phy.ops.reset(hw);
+ /* remember AUTOC from before we reset */
+ curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
mac_reset_top:
/*
* Issue global reset to the MAC. Needs to be SW reset if link is up.
hw->mac.orig_autoc2 = autoc2;
hw->mac.orig_link_settings_stored = true;
} else {
- if (autoc != hw->mac.orig_autoc) {
- /* Need SW/FW semaphore around AUTOC writes if LESM is
- * on, likewise reset_pipeline requires us to hold
- * this lock as it also writes to AUTOC.
- */
- bool got_lock = false;
- if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
- status = hw->mac.ops.acquire_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- if (status != IXGBE_SUCCESS) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto reset_hw_out;
- }
-
- got_lock = true;
- }
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
- ixgbe_reset_pipeline_82599(hw);
+ /* If MNG FW is running on a multi-speed device that
+ * doesn't autoneg with out driver support we need to
+ * leave LMS in the state it was before we MAC reset.
+ * Likewise if we support WoL we don't want change the
+ * LMS state.
+ */
+ if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
+ hw->wol_enabled)
+ hw->mac.orig_autoc =
+ (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+ curr_lms;
- if (got_lock)
- hw->mac.ops.release_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
+ if (autoc != hw->mac.orig_autoc) {
+ status = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc,
+ false);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
}
if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
return status;
}
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ */
+STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ IXGBE_FDIRCMD_CMD_MASK))
+ return IXGBE_SUCCESS;
+ usec_delay(10);
+ }
+
+ return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
/**
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
* @hw: pointer to hardware structure
**/
s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
{
+ s32 err;
int i;
u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
* Before starting reinitialization process,
* FDIRCMD.CMD must be zero.
*/
- for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- IXGBE_FDIRCMD_CMD_MASK))
- break;
- usec_delay(10);
- }
- if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- DEBUGOUT("Flow Director previous command isn't complete, "
- "aborting table re-initialization.\n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
+ return err;
}
IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
* @hw: pointer to hardware structure
* @fdirctrl: value to write to flow director control register, initially
* contains just the value of the Rx packet buffer allocation
+ * @cloud_mode: true - cloud mode, false - other mode
**/
-s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+ bool cloud_mode)
{
DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
bucket_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
sig_hash ^= hi_hash_dword << (16 - n); \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
*
* This function is almost identical to the function above but contains
- * several optomizations such as unwinding all of the loops, letting the
+ * several optimizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
union ixgbe_atr_hash_dword common,
u8 queue)
{
- u64 fdirhashcmd;
- u32 fdircmd;
+ u64 fdirhashcmd;
+ u32 fdircmd;
+ s32 err;
DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599");
fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
return IXGBE_SUCCESS;
bucket_hash ^= lo_hash_dword >> n; \
if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
bucket_hash ^= hi_hash_dword >> n; \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
* @atr_input: input bitstream to compute the hash on
* @input_mask: mask for the input bitstream
*
- * This function serves two main purposes. First it applys the input_mask
+ * This function serves two main purposes. First it applies the input_mask
* to the atr_input resulting in a cleaned up atr_input data stream.
* Secondly it computes the hash and stores it in the bkt_hash field at
* the end of the input byte stream. This way it will be available for
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 bucket_hash = 0;
+ u32 hi_dword = 0;
+ u32 i = 0;
/* Apply masks to input data */
- input->dword_stream[0] &= input_mask->dword_stream[0];
- input->dword_stream[1] &= input_mask->dword_stream[1];
- input->dword_stream[2] &= input_mask->dword_stream[2];
- input->dword_stream[3] &= input_mask->dword_stream[3];
- input->dword_stream[4] &= input_mask->dword_stream[4];
- input->dword_stream[5] &= input_mask->dword_stream[5];
- input->dword_stream[6] &= input_mask->dword_stream[6];
- input->dword_stream[7] &= input_mask->dword_stream[7];
- input->dword_stream[8] &= input_mask->dword_stream[8];
- input->dword_stream[9] &= input_mask->dword_stream[9];
- input->dword_stream[10] &= input_mask->dword_stream[10];
+ for (i = 0; i < 14; i++)
+ input->dword_stream[i] &= input_mask->dword_stream[i];
/* record the flow_vm_vlan bits as they are a key part to the hash */
flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]);
/* generate common hash dword */
- hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^
- input->dword_stream[2] ^
- input->dword_stream[3] ^
- input->dword_stream[4] ^
- input->dword_stream[5] ^
- input->dword_stream[6] ^
- input->dword_stream[7] ^
- input->dword_stream[8] ^
- input->dword_stream[9] ^
- input->dword_stream[10]);
+ for (i = 1; i <= 13; i++)
+ hi_dword ^= input->dword_stream[i];
+ hi_hash_dword = IXGBE_NTOHL(hi_dword);
/* low dword is word swapped version of common */
lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
/* Process remaining 30 bit of the key */
- IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+ for (i = 1; i <= 15; i++)
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
/*
* Limit hash to 13 bits since max bucket count is 8K.
}
/**
- * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
* @input_mask: mask to be bit swapped
*
* The source and destination port masks for flow director are bit swapped
IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input_mask)
+ union ixgbe_atr_input *input_mask, bool cloud_mode)
{
/* mask IPv6 since it is currently not supported */
u32 fdirm = IXGBE_FDIRM_DIPv6;
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
- /* store source and destination IP masks (big-enian) */
+ /* store source and destination IP masks (big-endian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_mask->formatted.src_ip[0]);
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
- u16 soft_id, u8 queue)
+ u16 soft_id, u8 queue, bool cloud_mode)
{
u32 fdirport, fdirvlan, fdirhash, fdircmd;
fdirport |= IXGBE_NTOHS(input->formatted.src_port);
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
- /* record vlan (little-endian) and flex_bytes(big-endian) */
+ /* record VLAN (little-endian) and flex_bytes(big-endian) */
fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
if (queue == IXGBE_FDIR_DROP_QUEUE)
fdircmd |= IXGBE_FDIRCMD_DROP;
+ if (input->formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK)
+ fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
{
u32 fdirhash;
u32 fdircmd = 0;
- u32 retry_count;
- s32 err = IXGBE_SUCCESS;
+ s32 err;
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
/* Query if filter is present */
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
- for (retry_count = 10; retry_count; retry_count--) {
- /* allow 10us for query to process */
- usec_delay(10);
- /* verify query completed successfully */
- fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
- if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
- break;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
}
- if (!retry_count)
- err = IXGBE_ERR_FDIR_REINIT_FAILED;
-
/* if filter exists in hardware then remove it */
if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
}
- return err;
+ return IXGBE_SUCCESS;
}
/**
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
union ixgbe_atr_input *input_mask,
- u16 soft_id, u8 queue)
+ u16 soft_id, u8 queue, bool cloud_mode)
{
s32 err = IXGBE_ERR_CONFIG;
*/
switch (input->formatted.flow_type) {
case IXGBE_ATR_FLOW_TYPE_IPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4:
input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK;
if (input->formatted.dst_port || input->formatted.src_port) {
DEBUGOUT(" Error on src/dst port\n");
}
break;
case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4:
if (input->formatted.dst_port || input->formatted.src_port) {
DEBUGOUT(" Error on src/dst port\n");
return IXGBE_ERR_CONFIG;
}
case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4:
case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4:
input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
IXGBE_ATR_L4TYPE_MASK;
break;
}
/* program input mask into the HW */
- err = ixgbe_fdir_set_input_mask_82599(hw, input_mask);
+ err = ixgbe_fdir_set_input_mask_82599(hw, input_mask, cloud_mode);
if (err)
return err;
/* program filters to filter memory */
return ixgbe_fdir_write_perfect_filter_82599(hw, input,
- soft_id, queue);
+ soft_id, queue, cloud_mode);
}
/**
if (status != IXGBE_SUCCESS) {
/* 82599 10GBASE-T requires an external PHY */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
- goto out;
+ return status;
else
status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.type = ixgbe_phy_none;
- status = IXGBE_SUCCESS;
+ return IXGBE_SUCCESS;
}
/* Return error if SFP module has been detected but is not supported */
if (hw->phy.type == ixgbe_phy_sfp_unsupported)
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
-out:
return status;
}
u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u16 ext_ability = 0;
- u8 comp_codes_10g = 0;
- u8 comp_codes_1g = 0;
DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
/* SFP check must be done last since DA modules are sometimes used to
* test KR mode - we need to id KR mode correctly before SFP module.
* Call identify_sfp because the pluggable module may have changed */
- hw->phy.ops.identify_sfp(hw);
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- goto out;
-
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_phy_sfp_ftl_active:
- case ixgbe_phy_sfp_active_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
- break;
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
- else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
- break;
- default:
- break;
- }
-
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
out:
return physical_layer;
}
hw->mac.ops.disable_sec_rx_path(hw);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+ if (regval & IXGBE_RXCTRL_RXEN)
+ ixgbe_enable_rx(hw);
+ else
+ ixgbe_disable_rx(hw);
hw->mac.ops.enable_sec_rx_path(hw);
}
/**
- * ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ * ixgbe_verify_fw_version_82599 - verify FW version for 82599
* @hw: pointer to hardware structure
*
* Verifies that installed the firmware version is 0.6 or higher
(fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
goto out;
- /* get the lesm state word */
+ /* get the LESM state word */
status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
IXGBE_FW_LESM_STATE_1),
&fw_lesm_state);
* @hw: pointer to hardware structure
*
* Reset pipeline by asserting Restart_AN together with LMS change to ensure
- * full pipeline reset
+ * full pipeline reset. This function assumes the SW/FW lock is held.
**/
s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
{
- s32 i, autoc_reg, autoc2_reg, ret_val;
- s32 anlp1_reg = 0;
+ s32 ret_val;
+ u32 anlp1_reg = 0;
+ u32 i, autoc_reg, autoc2_reg;
/* Enable link if disabled in NVM */
autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg ^ IXGBE_AUTOC_LMS_1G_AN);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+ autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
/* Wait for AN to leave state 0 */
for (i = 0; i < 10; i++) {
msec_delay(4);
git.droids-corp.org / dpdk.git / blobdiff