/*******************************************************************************
-Copyright (c) 2001-2012, Intel Corporation
+Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
***************************************************************************/
#include "ixgbe_type.h"
+#include "ixgbe_82599.h"
#include "ixgbe_api.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
-s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg);
-enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
-void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw);
-void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw);
-s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
-s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
-s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
-s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
-u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
-s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
-static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
-bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
-static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES 128
+#define IXGBE_82599_MC_TBL_SIZE 128
+#define IXGBE_82599_VFT_TBL_SIZE 128
+#define IXGBE_82599_RX_PB_SIZE 512
+
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
u16 offset, u16 *data);
-static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
- /* enable the laser control functions for SFP+ fiber */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ /*
+ * enable the laser control functions for SFP+ fiber
+ * and MNG not enabled
+ */
+ if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ !ixgbe_mng_enabled(hw)) {
mac->ops.disable_tx_laser =
- &ixgbe_disable_tx_laser_multispeed_fiber;
+ ixgbe_disable_tx_laser_multispeed_fiber;
mac->ops.enable_tx_laser =
- &ixgbe_enable_tx_laser_multispeed_fiber;
- mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
+ ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = ixgbe_flap_tx_laser_multispeed_fiber;
} else {
mac->ops.disable_tx_laser = NULL;
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
- mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
} else {
if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
hw->phy.smart_speed == ixgbe_smart_speed_on) &&
!ixgbe_verify_lesm_fw_enabled_82599(hw)) {
- mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+ mac->ops.setup_link = ixgbe_setup_mac_link_smartspeed;
} else {
- mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+ mac->ops.setup_link = ixgbe_setup_mac_link_82599;
}
}
}
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
s32 ret_val = IXGBE_SUCCESS;
+ u32 esdp;
DEBUGFUNC("ixgbe_init_phy_ops_82599");
+ if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+ /* Store flag indicating I2C bus access control unit. */
+ hw->phy.qsfp_shared_i2c_bus = TRUE;
+
+ /* Initialize access to QSFP+ I2C bus */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0_DIR;
+ esdp &= ~IXGBE_ESDP_SDP1_DIR;
+ esdp &= ~IXGBE_ESDP_SDP0;
+ esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+ esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_82599;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_82599;
+ }
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
/* If copper media, overwrite with copper function pointers */
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
- mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+ mac->ops.setup_link = ixgbe_setup_copper_link_82599;
mac->ops.get_link_capabilities =
- &ixgbe_get_copper_link_capabilities_generic;
+ ixgbe_get_copper_link_capabilities_generic;
}
- /* Set necessary function pointers based on phy type */
+ /* Set necessary function pointers based on PHY type */
switch (hw->phy.type) {
case ixgbe_phy_tn:
- phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
- phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = ixgbe_check_phy_link_tnx;
phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_tnx;
+ ixgbe_get_phy_firmware_version_tnx;
break;
default:
break;
s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
s32 ret_val = IXGBE_SUCCESS;
- u32 reg_anlp1 = 0;
- u32 i = 0;
u16 list_offset, data_offset, data_value;
DEBUGFUNC("ixgbe_setup_sfp_modules_82599");
hw->phy.ops.reset = NULL;
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
- &data_offset);
+ &data_offset);
if (ret_val != IXGBE_SUCCESS)
goto setup_sfp_out;
/* PHY config will finish before releasing the semaphore */
ret_val = hw->mac.ops.acquire_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
+ IXGBE_GSSR_MAC_CSR_SM);
if (ret_val != IXGBE_SUCCESS) {
ret_val = IXGBE_ERR_SWFW_SYNC;
goto setup_sfp_out;
}
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
while (data_value != 0xffff) {
IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
IXGBE_WRITE_FLUSH(hw);
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
}
/* Release the semaphore */
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
- /* Delay obtaining semaphore again to allow FW access */
+ /* Delay obtaining semaphore again to allow FW access
+ * prot_autoc_write uses the semaphore too.
+ */
msec_delay(hw->eeprom.semaphore_delay);
- /* Now restart DSP by setting Restart_AN and clearing LMS */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
- IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
- IXGBE_AUTOC_AN_RESTART));
+ /* Restart DSP and set SFI mode */
+ ret_val = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+ false);
- /* Wait for AN to leave state 0 */
- for (i = 0; i < 10; i++) {
- msec_delay(4);
- reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
- if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
- break;
- }
- if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+ if (ret_val) {
DEBUGOUT("sfp module setup not complete\n");
ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
goto setup_sfp_out;
}
- /* Restart DSP by setting Restart_AN and return to SFI mode */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
- IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
- IXGBE_AUTOC_AN_RESTART));
}
setup_sfp_out:
return ret_val;
+
+setup_sfp_err:
+ /* Release the semaphore */
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /* Delay obtaining semaphore again to allow FW access */
+ msec_delay(hw->eeprom.semaphore_delay);
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @locked: Return the if we locked for this read.
+ * @reg_val: Value we read from AUTOC
+ *
+ * For this part (82599) we need to wrap read-modify-writes with a possible
+ * FW/SW lock. It is assumed this lock will be freed with the next
+ * prot_autoc_write_82599().
+ */
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+ s32 ret_val;
+
+ *locked = false;
+ /* If LESM is on then we need to hold the SW/FW semaphore. */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ *locked = true;
+ }
+
+ *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ * previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ */
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ /* We only need to get the lock if:
+ * - We didn't do it already (in the read part of a read-modify-write)
+ * - LESM is enabled.
+ */
+ if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ locked = true;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ ret_val = ixgbe_reset_pipeline_82599(hw);
+
+out:
+ /* Free the SW/FW semaphore as we either grabbed it here or
+ * already had it when this function was called.
+ */
+ if (locked)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+ return ret_val;
}
/**
DEBUGFUNC("ixgbe_init_ops_82599");
- ret_val = ixgbe_init_phy_ops_generic(hw);
+ ixgbe_init_phy_ops_generic(hw);
ret_val = ixgbe_init_ops_generic(hw);
/* PHY */
- phy->ops.identify = &ixgbe_identify_phy_82599;
- phy->ops.init = &ixgbe_init_phy_ops_82599;
+ phy->ops.identify = ixgbe_identify_phy_82599;
+ phy->ops.init = ixgbe_init_phy_ops_82599;
/* MAC */
- mac->ops.reset_hw = &ixgbe_reset_hw_82599;
- mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_gen2;
- mac->ops.get_media_type = &ixgbe_get_media_type_82599;
+ mac->ops.reset_hw = ixgbe_reset_hw_82599;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+ mac->ops.get_media_type = ixgbe_get_media_type_82599;
mac->ops.get_supported_physical_layer =
- &ixgbe_get_supported_physical_layer_82599;
- mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599;
- mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599;
- mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599;
- mac->ops.start_hw = &ixgbe_start_hw_82599;
- mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic;
- mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic;
- mac->ops.get_device_caps = &ixgbe_get_device_caps_generic;
- mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic;
- mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic;
+ ixgbe_get_supported_physical_layer_82599;
+ mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+ mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82599;
+ mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82599;
+ mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82599;
+ mac->ops.start_hw = ixgbe_start_hw_82599;
+ mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+ mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+ mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+ mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+ mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.prot_autoc_read = prot_autoc_read_82599;
+ mac->ops.prot_autoc_write = prot_autoc_write_82599;
/* RAR, Multicast, VLAN */
- mac->ops.set_vmdq = &ixgbe_set_vmdq_generic;
- mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic;
- mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic;
+ mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+ mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
mac->rar_highwater = 1;
- mac->ops.set_vfta = &ixgbe_set_vfta_generic;
- mac->ops.clear_vfta = &ixgbe_clear_vfta_generic;
- mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic;
- mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599;
- mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing;
- mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing;
+ mac->ops.set_vfta = ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+ mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+ mac->ops.setup_sfp = ixgbe_setup_sfp_modules_82599;
+ mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+ mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
/* Link */
- mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599;
- mac->ops.check_link = &ixgbe_check_mac_link_generic;
- mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82599;
+ mac->ops.check_link = ixgbe_check_mac_link_generic;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
ixgbe_init_mac_link_ops_82599(hw);
- mac->mcft_size = 128;
- mac->vft_size = 128;
- mac->num_rar_entries = 128;
- mac->rx_pb_size = 512;
- mac->max_tx_queues = 128;
- mac->max_rx_queues = 128;
- mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+ mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
+ mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) &
- IXGBE_FWSM_MODE_MASK) ? TRUE : FALSE;
+ IXGBE_FWSM_MODE_MASK) ? true : false;
hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
/* EEPROM */
- eeprom->ops.read = &ixgbe_read_eeprom_82599;
- eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599;
+ eeprom->ops.read = ixgbe_read_eeprom_82599;
+ eeprom->ops.read_buffer = ixgbe_read_eeprom_buffer_82599;
/* Manageability interface */
- mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic;
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+ mac->ops.get_thermal_sensor_data =
+ ixgbe_get_thermal_sensor_data_generic;
+ mac->ops.init_thermal_sensor_thresh =
+ ixgbe_init_thermal_sensor_thresh_generic;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
return ret_val;
}
* ixgbe_get_link_capabilities_82599 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
- * @negotiation: TRUE when autoneg or autotry is enabled
+ * @autoneg: true when autoneg or autotry is enabled
*
* Determines the link capabilities by reading the AUTOC register.
**/
s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *negotiation)
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = IXGBE_SUCCESS;
u32 autoc = 0;
/* Check if 1G SFP module. */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = TRUE;
+ *autoneg = true;
goto out;
}
switch (autoc & IXGBE_AUTOC_LMS_MASK) {
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = FALSE;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = FALSE;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_1G_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = TRUE;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_10G_SERIAL:
*speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = FALSE;
+ *autoneg = false;
break;
case IXGBE_AUTOC_LMS_KX4_KX_KR:
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = TRUE;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = TRUE;
+ *autoneg = true;
break;
case IXGBE_AUTOC_LMS_SGMII_1G_100M:
*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
- *negotiation = FALSE;
+ *autoneg = false;
break;
default:
if (hw->phy.multispeed_fiber) {
*speed |= IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = TRUE;
+ IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* QSFP must not enable full auto-negotiation
+ * Limited autoneg is enabled at 1G
+ */
+ if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+ *autoneg = false;
+ else
+ *autoneg = true;
}
out:
case IXGBE_DEV_ID_82599_SFP:
case IXGBE_DEV_ID_82599_SFP_FCOE:
case IXGBE_DEV_ID_82599_SFP_EM:
+ case IXGBE_DEV_ID_82599_SFP_SF2:
+ case IXGBE_DEV_ID_82599_SFP_SF_QP:
case IXGBE_DEV_ID_82599EN_SFP:
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82599_T3_LOM:
media_type = ixgbe_media_type_copper;
break;
+ case IXGBE_DEV_ID_82599_LS:
+ media_type = ixgbe_media_type_fiber_lco;
+ break;
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ media_type = ixgbe_media_type_fiber_qsfp;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
return media_type;
}
+/**
+ * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ * @hw: pointer to hardware structure
+ *
+ * Disables link during D3 power down sequence.
+ *
+ **/
+void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+ u32 autoc2_reg, fwsm;
+ u16 ee_ctrl_2 = 0;
+
+ DEBUGFUNC("ixgbe_stop_mac_link_on_d3_82599");
+ ixgbe_read_eeprom(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+ /* Check to see if MNG FW could be enabled */
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+
+ if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
+ !hw->wol_enabled &&
+ ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
+ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+ }
+}
+
/**
* ixgbe_start_mac_link_82599 - Setup MAC link settings
* @hw: pointer to hardware structure
- * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Configures link settings based on values in the ixgbe_hw struct.
* Restarts the link. Performs autonegotiation if needed.
**/
s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete)
+ bool autoneg_wait_to_complete)
{
u32 autoc_reg;
u32 links_reg;
u32 i;
s32 status = IXGBE_SUCCESS;
+ bool got_lock = false;
DEBUGFUNC("ixgbe_start_mac_link_82599");
+ /* reset_pipeline requires us to hold this lock as it writes to
+ * AUTOC.
+ */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ status = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ got_lock = true;
+ }
+
/* Restart link */
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/* Only poll for autoneg to complete if specified to do so */
if (autoneg_wait_to_complete) {
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
IXGBE_AUTOC_LMS_KX4_KX_KR ||
(autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
/* Add delay to filter out noises during initial link setup */
msec_delay(50);
+out:
return status;
}
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /* Disable tx laser; allow 100us to go dark per spec */
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
+ /* Disable Tx laser; allow 100us to go dark per spec */
esdp_reg |= IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /* Enable tx laser; allow 100ms to light up */
+ /* Enable Tx laser; allow 100ms to light up */
esdp_reg &= ~IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
* @hw: pointer to hardware structure
*
* When the driver changes the link speeds that it can support,
- * it sets autotry_restart to TRUE to indicate that we need to
+ * it sets autotry_restart to true to indicate that we need to
* initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
+ * so, we set the speed then disable and re-enable the Tx laser, to
* alert the link partner that it also needs to restart autotry on its
- * end. This is consistent with TRUE clause 37 autoneg, which also
+ * end. This is consistent with true clause 37 autoneg, which also
* involves a loss of signal.
**/
void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
DEBUGFUNC("ixgbe_flap_tx_laser_multispeed_fiber");
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
if (hw->mac.autotry_restart) {
ixgbe_disable_tx_laser_multispeed_fiber(hw);
ixgbe_enable_tx_laser_multispeed_fiber(hw);
- hw->mac.autotry_restart = FALSE;
+ hw->mac.autotry_restart = false;
}
}
+
/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: TRUE if autonegotiation enabled
- * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Set the link speed in the AUTOC register and restarts link.
**/
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
s32 status = IXGBE_SUCCESS;
ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
u32 speedcnt = 0;
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
u32 i = 0;
- bool link_up = FALSE;
- bool negotiation;
+ bool autoneg, link_up = false;
DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
/* Mask off requested but non-supported speeds */
- status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation);
+ status = ixgbe_get_link_capabilities(hw, &link_speed, &autoneg);
if (status != IXGBE_SUCCESS)
return status;
highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
/* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
if (status != IXGBE_SUCCESS)
return status;
goto out;
/* Set the module link speed */
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects MAC link speed */
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
/* Allow module to change analog characteristics (1G->10G) */
msec_delay(40);
status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
return status;
/* If we have link, just jump out */
status = ixgbe_check_link(hw, &link_speed,
- &link_up, FALSE);
+ &link_up, false);
if (status != IXGBE_SUCCESS)
return status;
highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
/* If we already have link at this speed, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
if (status != IXGBE_SUCCESS)
return status;
goto out;
/* Set the module link speed */
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects link speed */
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
/* Allow module to change analog characteristics (10G->1G) */
msec_delay(40);
status = ixgbe_setup_mac_link_82599(hw,
IXGBE_LINK_SPEED_1GB_FULL,
- autoneg,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
return status;
- /* Flap the tx laser if it has not already been done */
+ /* Flap the Tx laser if it has not already been done */
ixgbe_flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
msec_delay(100);
/* If we have link, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
if (status != IXGBE_SUCCESS)
return status;
*/
if (speedcnt > 1)
status = ixgbe_setup_mac_link_multispeed_fiber(hw,
- highest_link_speed, autoneg, autoneg_wait_to_complete);
+ highest_link_speed, autoneg_wait_to_complete);
out:
/* Set autoneg_advertised value based on input link speed */
* ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: TRUE if autonegotiation enabled
- * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Implements the Intel SmartSpeed algorithm.
**/
s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
s32 status = IXGBE_SUCCESS;
ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
s32 i, j;
- bool link_up = FALSE;
+ bool link_up = false;
u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
DEBUGFUNC("ixgbe_setup_mac_link_smartspeed");
*/
/* First, try to get link with full advertisement */
- hw->phy.smart_speed_active = FALSE;
+ hw->phy.smart_speed_active = false;
for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
goto out;
/* If we have link, just jump out */
status = ixgbe_check_link(hw, &link_speed, &link_up,
- FALSE);
+ false);
if (status != IXGBE_SUCCESS)
goto out;
goto out;
/* Turn SmartSpeed on to disable KR support */
- hw->phy.smart_speed_active = TRUE;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ hw->phy.smart_speed_active = true;
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
if (status != IXGBE_SUCCESS)
goto out;
msec_delay(100);
/* If we have link, just jump out */
- status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE);
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
if (status != IXGBE_SUCCESS)
goto out;
}
/* We didn't get link. Turn SmartSpeed back off. */
- hw->phy.smart_speed_active = FALSE;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ hw->phy.smart_speed_active = false;
+ status = ixgbe_setup_mac_link_82599(hw, speed,
autoneg_wait_to_complete);
out:
* ixgbe_setup_mac_link_82599 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: TRUE if autonegotiation enabled
- * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Set the link speed in the AUTOC register and restarts link.
**/
s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
+ bool autoneg = false;
s32 status = IXGBE_SUCCESS;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 pma_pmd_1g, link_mode;
+ u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); /* holds the value of AUTOC register at this current point in time */
+ u32 orig_autoc = 0; /* holds the cached value of AUTOC register */
+ u32 autoc = current_autoc; /* Temporary variable used for comparison purposes */
u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- u32 start_autoc = autoc;
- u32 orig_autoc = 0;
- u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
u32 links_reg;
u32 i;
/* Check to see if speed passed in is supported. */
status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
- if (status != IXGBE_SUCCESS)
+ if (status)
goto out;
speed &= link_capabilities;
else
orig_autoc = autoc;
+ link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+
if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
/* Set KX4/KX/KR support according to speed requested */
autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
autoc |= IXGBE_AUTOC_KX4_SUPP;
if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
- (hw->phy.smart_speed_active == FALSE))
+ (hw->phy.smart_speed_active == false))
autoc |= IXGBE_AUTOC_KR_SUPP;
+ }
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
autoc |= IXGBE_AUTOC_KX_SUPP;
} else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
- (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
- link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+ (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+ link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
/* Switch from 1G SFI to 10G SFI if requested */
if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
(pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
}
} else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
- (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+ (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
/* Switch from 10G SFI to 1G SFI if requested */
if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
(pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
autoc &= ~IXGBE_AUTOC_LMS_MASK;
- if (autoneg)
+ if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel)
autoc |= IXGBE_AUTOC_LMS_1G_AN;
else
autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
}
}
- if (autoc != start_autoc) {
+ if (autoc != current_autoc) {
/* Restart link */
- autoc |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+ if (status != IXGBE_SUCCESS)
+ goto out;
/* Only poll for autoneg to complete if specified to do so */
if (autoneg_wait_to_complete) {
* ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: TRUE if autonegotiation enabled
- * @autoneg_wait_to_complete: TRUE if waiting is needed to complete
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
*
* Restarts link on PHY and MAC based on settings passed in.
**/
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
s32 status;
DEBUGFUNC("ixgbe_setup_copper_link_82599");
/* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
+ status = hw->phy.ops.setup_link_speed(hw, speed,
+ autoneg_wait_to_complete);
/* Set up MAC */
ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
{
ixgbe_link_speed link_speed;
s32 status;
- u32 ctrl, i, autoc, autoc2;
- bool link_up = FALSE;
+ u32 ctrl = 0;
+ u32 i, autoc, autoc2;
+ u32 curr_lms;
+ bool link_up = false;
DEBUGFUNC("ixgbe_reset_hw_82599");
/* Setup SFP module if there is one present. */
if (hw->phy.sfp_setup_needed) {
status = hw->mac.ops.setup_sfp(hw);
- hw->phy.sfp_setup_needed = FALSE;
+ hw->phy.sfp_setup_needed = false;
}
if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
goto reset_hw_out;
/* Reset PHY */
- if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL)
+ if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
hw->phy.ops.reset(hw);
+ /* remember AUTOC from before we reset */
+ curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
mac_reset_top:
/*
* Issue global reset to the MAC. Needs to be SW reset if link is up.
*/
ctrl = IXGBE_CTRL_LNK_RST;
if (!hw->force_full_reset) {
- hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
if (link_up)
ctrl = IXGBE_CTRL_RST;
}
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
IXGBE_WRITE_FLUSH(hw);
- /* Poll for reset bit to self-clear indicating reset is complete */
+ /* Poll for reset bit to self-clear meaning reset is complete */
for (i = 0; i < 10; i++) {
usec_delay(1);
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
/*
* Double resets are required for recovery from certain error
- * conditions. Between resets, it is necessary to stall to allow time
- * for any pending HW events to complete.
+ * conditions. Between resets, it is necessary to stall to
+ * allow time for any pending HW events to complete.
*/
if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
*/
autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- if (hw->mac.orig_link_settings_stored == FALSE) {
+
+ /* Enable link if disabled in NVM */
+ if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+ autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ if (hw->mac.orig_link_settings_stored == false) {
hw->mac.orig_autoc = autoc;
hw->mac.orig_autoc2 = autoc2;
- hw->mac.orig_link_settings_stored = TRUE;
+ hw->mac.orig_link_settings_stored = true;
} else {
- if (autoc != hw->mac.orig_autoc)
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
- IXGBE_AUTOC_AN_RESTART));
+
+ /* If MNG FW is running on a multi-speed device that
+ * doesn't autoneg with out driver support we need to
+ * leave LMS in the state it was before we MAC reset.
+ * Likewise if we support WoL we don't want change the
+ * LMS state.
+ */
+ if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
+ hw->wol_enabled)
+ hw->mac.orig_autoc =
+ (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+ curr_lms;
+
+ if (autoc != hw->mac.orig_autoc) {
+ status = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc,
+ false);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+ }
if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
(hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
autoc2 |= (hw->mac.orig_autoc2 &
- IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_AUTOC2_UPPER_MASK);
IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
}
}
/* Add the SAN MAC address to the RAR only if it's a valid address */
if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
- hw->mac.san_addr, 0, IXGBE_RAH_AV);
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Save the SAN MAC RAR index */
+ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
/* Reserve the last RAR for the SAN MAC address */
hw->mac.num_rar_entries--;
/* Store the alternative WWNN/WWPN prefix */
hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
- &hw->mac.wwpn_prefix);
+ &hw->mac.wwpn_prefix);
reset_hw_out:
return status;
}
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ */
+STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ IXGBE_FDIRCMD_CMD_MASK))
+ return IXGBE_SUCCESS;
+ usec_delay(10);
+ }
+
+ return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
/**
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
* @hw: pointer to hardware structure
**/
s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
{
+ s32 err;
int i;
u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
* Before starting reinitialization process,
* FDIRCMD.CMD must be zero.
*/
- for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- IXGBE_FDIRCMD_CMD_MASK))
- break;
- usec_delay(10);
- }
- if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- DEBUGOUT("Flow Director previous command isn't complete, "
- "aborting table re-initialization. \n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
+ return err;
}
IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
* - write 0 to bit 8 of FDIRCMD register
*/
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
- (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
- IXGBE_FDIRCMD_CLEARHT));
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+ IXGBE_FDIRCMD_CLEARHT));
IXGBE_WRITE_FLUSH(hw);
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
- (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- ~IXGBE_FDIRCMD_CLEARHT));
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ ~IXGBE_FDIRCMD_CLEARHT));
IXGBE_WRITE_FLUSH(hw);
/*
* Clear FDIR Hash register to clear any leftover hashes
/* Poll init-done after we write FDIRCTRL register */
for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
- IXGBE_FDIRCTRL_INIT_DONE)
+ IXGBE_FDIRCTRL_INIT_DONE)
break;
- usec_delay(10);
+ msec_delay(1);
}
if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
DEBUGOUT("Flow Director Signature poll time exceeded!\n");
* @hw: pointer to hardware structure
* @fdirctrl: value to write to flow director control register
**/
-static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+STATIC void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
int i;
IXGBE_WRITE_FLUSH(hw);
for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
- IXGBE_FDIRCTRL_INIT_DONE)
+ IXGBE_FDIRCTRL_INIT_DONE)
break;
msec_delay(1);
}
* ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
* @hw: pointer to hardware structure
* @fdirctrl: value to write to flow director control register, initially
- * contains just the value of the Rx packet buffer allocation
+ * contains just the value of the Rx packet buffer allocation
**/
s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
* ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
* @hw: pointer to hardware structure
* @fdirctrl: value to write to flow director control register, initially
- * contains just the value of the Rx packet buffer allocation
+ * contains just the value of the Rx packet buffer allocation
+ * @cloud_mode: true - cloud mode, false - other mode
**/
-s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+ bool cloud_mode)
{
DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
(0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
(4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+ if (cloud_mode)
+ fdirctrl |=(IXGBE_FDIRCTRL_FILTERMODE_CLOUD <<
+ IXGBE_FDIRCTRL_FILTERMODE_SHIFT);
+
/* write hashes and fdirctrl register, poll for completion */
ixgbe_fdir_enable_82599(hw, fdirctrl);
bucket_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
sig_hash ^= hi_hash_dword << (16 - n); \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
*
* This function is almost identical to the function above but contains
- * several optomizations such as unwinding all of the loops, letting the
+ * several optimizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
**/
u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
- union ixgbe_atr_hash_dword common)
+ union ixgbe_atr_hash_dword common)
{
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
* @queue: queue index to direct traffic to
**/
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_hash_dword input,
- union ixgbe_atr_hash_dword common,
- u8 queue)
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
+ u8 queue)
{
- u64 fdirhashcmd;
- u32 fdircmd;
+ u64 fdirhashcmd;
+ u32 fdircmd;
+ s32 err;
DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599");
/*
* Get the flow_type in order to program FDIRCMD properly
* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+ * fifth is FDIRCMD.TUNNEL_FILTER
*/
switch (input.formatted.flow_type) {
case IXGBE_ATR_FLOW_TYPE_TCPV4:
/* configure FDIRCMD register */
fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
- IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
return IXGBE_SUCCESS;
bucket_hash ^= lo_hash_dword >> n; \
if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
bucket_hash ^= hi_hash_dword >> n; \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
* @atr_input: input bitstream to compute the hash on
* @input_mask: mask for the input bitstream
*
- * This function serves two main purposes. First it applys the input_mask
+ * This function serves two main purposes. First it applies the input_mask
* to the atr_input resulting in a cleaned up atr_input data stream.
* Secondly it computes the hash and stores it in the bkt_hash field at
* the end of the input byte stream. This way it will be available for
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 bucket_hash = 0;
+ u32 hi_dword = 0;
+ u32 i = 0;
/* Apply masks to input data */
- input->dword_stream[0] &= input_mask->dword_stream[0];
- input->dword_stream[1] &= input_mask->dword_stream[1];
- input->dword_stream[2] &= input_mask->dword_stream[2];
- input->dword_stream[3] &= input_mask->dword_stream[3];
- input->dword_stream[4] &= input_mask->dword_stream[4];
- input->dword_stream[5] &= input_mask->dword_stream[5];
- input->dword_stream[6] &= input_mask->dword_stream[6];
- input->dword_stream[7] &= input_mask->dword_stream[7];
- input->dword_stream[8] &= input_mask->dword_stream[8];
- input->dword_stream[9] &= input_mask->dword_stream[9];
- input->dword_stream[10] &= input_mask->dword_stream[10];
+ for (i = 0; i < 14; i++)
+ input->dword_stream[i] &= input_mask->dword_stream[i];
/* record the flow_vm_vlan bits as they are a key part to the hash */
flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]);
/* generate common hash dword */
- hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^
- input->dword_stream[2] ^
- input->dword_stream[3] ^
- input->dword_stream[4] ^
- input->dword_stream[5] ^
- input->dword_stream[6] ^
- input->dword_stream[7] ^
- input->dword_stream[8] ^
- input->dword_stream[9] ^
- input->dword_stream[10]);
+ for (i = 1; i <= 13; i++)
+ hi_dword ^= input->dword_stream[i];
+ hi_hash_dword = IXGBE_NTOHL(hi_dword);
/* low dword is word swapped version of common */
lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
/* Process remaining 30 bit of the key */
- IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+ for (i = 1; i <= 15; i++)
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
/*
* Limit hash to 13 bits since max bucket count is 8K.
}
/**
- * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
* @input_mask: mask to be bit swapped
*
* The source and destination port masks for flow director are bit swapped
* generate a correctly swapped value we need to bit swap the mask and that
* is what is accomplished by this function.
**/
-static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+STATIC u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
{
u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port);
mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input_mask)
+ union ixgbe_atr_input *input_mask, bool cloud_mode)
{
/* mask IPv6 since it is currently not supported */
u32 fdirm = IXGBE_FDIRM_DIPv6;
u32 fdirtcpm;
-
+ u32 fdirip6m;
DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
/*
*/
/* verify bucket hash is cleared on hash generation */
- if (input_mask->formatted.bkt_hash) {
+ if (input_mask->formatted.bkt_hash)
DEBUGOUT(" bucket hash should always be 0 in mask\n");
- }
/* Program FDIRM and verify partial masks */
switch (input_mask->formatted.vm_pool & 0x7F) {
return IXGBE_ERR_CONFIG;
}
+ if (cloud_mode) {
+ fdirm |= IXGBE_FDIRM_L3P;
+ fdirip6m = ((u32) 0xFFFFU << IXGBE_FDIRIP6M_DIPM_SHIFT);
+ fdirip6m |= IXGBE_FDIRIP6M_ALWAYS_MASK;
+
+ switch (input_mask->formatted.inner_mac[0] & 0xFF) {
+ case 0x00:
+ /* Mask inner MAC, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_INNER_MAC;
+ case 0xFF:
+ break;
+ default:
+ DEBUGOUT(" Error on inner_mac byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tni_vni & 0xFFFFFFFF) {
+ case 0x0:
+ /* Mask vxlan id */
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI;
+ break;
+ case 0x00FFFFFF:
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI_24;
+ break;
+ case 0xFFFFFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on TNI/VNI byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tunnel_type & 0xFFFF) {
+ case 0x0:
+ /* Mask turnnel type, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_TUNNEL_TYPE;
+ case 0xFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on tunnel type byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIP6M, fdirip6m);
+ }
+
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
/* write both the same so that UDP and TCP use the same mask */
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+ /* also use it for SCTP */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+ break;
+ default:
+ break;
+ }
- /* store source and destination IP masks (big-enian) */
+ /* store source and destination IP masks (big-endian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_mask->formatted.src_ip[0]);
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
- u16 soft_id, u8 queue)
+ u16 soft_id, u8 queue, bool cloud_mode)
{
u32 fdirport, fdirvlan, fdirhash, fdircmd;
+ u32 addr_low, addr_high;
+ u32 cloud_type = 0;
+ s32 err;
DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
fdirport |= IXGBE_NTOHS(input->formatted.src_port);
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
- /* record vlan (little-endian) and flex_bytes(big-endian) */
+ /* record VLAN (little-endian) and flex_bytes(big-endian) */
fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+ if (cloud_mode) {
+ if (input->formatted.tunnel_type != 0)
+ cloud_type = 0x80000000;
+
+ addr_low = ((u32)input->formatted.inner_mac[0] |
+ ((u32)input->formatted.inner_mac[1] << 8) |
+ ((u32)input->formatted.inner_mac[2] << 16) |
+ ((u32)input->formatted.inner_mac[3] << 24));
+ addr_high = ((u32)input->formatted.inner_mac[4] |
+ ((u32)input->formatted.inner_mac[5] << 8));
+ cloud_type |= addr_high;
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), addr_low);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), cloud_type);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), input->formatted.tni_vni);
+ }
+
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
if (queue == IXGBE_FDIR_DROP_QUEUE)
fdircmd |= IXGBE_FDIRCMD_DROP;
+ if (input->formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK)
+ fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
return IXGBE_SUCCESS;
}
{
u32 fdirhash;
u32 fdircmd = 0;
- u32 retry_count;
- s32 err = IXGBE_SUCCESS;
+ s32 err;
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
/* Query if filter is present */
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
- for (retry_count = 10; retry_count; retry_count--) {
- /* allow 10us for query to process */
- usec_delay(10);
- /* verify query completed successfully */
- fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
- if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
- break;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
}
- if (!retry_count)
- err = IXGBE_ERR_FDIR_REINIT_FAILED;
-
/* if filter exists in hardware then remove it */
if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
}
- return err;
+ return IXGBE_SUCCESS;
}
/**
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
union ixgbe_atr_input *input_mask,
- u16 soft_id, u8 queue)
+ u16 soft_id, u8 queue, bool cloud_mode)
{
s32 err = IXGBE_ERR_CONFIG;
*/
switch (input->formatted.flow_type) {
case IXGBE_ATR_FLOW_TYPE_IPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4:
input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK;
if (input->formatted.dst_port || input->formatted.src_port) {
DEBUGOUT(" Error on src/dst port\n");
}
break;
case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4:
if (input->formatted.dst_port || input->formatted.src_port) {
DEBUGOUT(" Error on src/dst port\n");
return IXGBE_ERR_CONFIG;
}
case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4:
case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4:
input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
IXGBE_ATR_L4TYPE_MASK;
break;
}
/* program input mask into the HW */
- err = ixgbe_fdir_set_input_mask_82599(hw, input_mask);
+ err = ixgbe_fdir_set_input_mask_82599(hw, input_mask, cloud_mode);
if (err)
return err;
/* program filters to filter memory */
return ixgbe_fdir_write_perfect_filter_82599(hw, input,
- soft_id, queue);
+ soft_id, queue, cloud_mode);
}
/**
DEBUGFUNC("ixgbe_read_analog_reg8_82599");
IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
- (reg << 8));
+ (reg << 8));
IXGBE_WRITE_FLUSH(hw);
usec_delay(10);
core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
goto out;
/* We need to run link autotry after the driver loads */
- hw->mac.autotry_restart = TRUE;
+ hw->mac.autotry_restart = true;
if (ret_val == IXGBE_SUCCESS)
ret_val = ixgbe_verify_fw_version_82599(hw);
**/
s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
{
- s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ s32 status;
DEBUGFUNC("ixgbe_identify_phy_82599");
if (status != IXGBE_SUCCESS) {
/* 82599 10GBASE-T requires an external PHY */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
- goto out;
+ return status;
else
- status = ixgbe_identify_sfp_module_generic(hw);
+ status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.type = ixgbe_phy_none;
- status = IXGBE_SUCCESS;
+ return IXGBE_SUCCESS;
}
/* Return error if SFP module has been detected but is not supported */
if (hw->phy.type == ixgbe_phy_sfp_unsupported)
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
-out:
return status;
}
u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u16 ext_ability = 0;
- u8 comp_codes_10g = 0;
- u8 comp_codes_1g = 0;
DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
/* SFP check must be done last since DA modules are sometimes used to
* test KR mode - we need to id KR mode correctly before SFP module.
* Call identify_sfp because the pluggable module may have changed */
- hw->phy.ops.identify_sfp(hw);
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- goto out;
-
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_phy_sfp_ftl_active:
- case ixgbe_phy_sfp_active_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
- break;
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
- break;
- default:
- break;
- }
-
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
out:
return physical_layer;
}
**/
s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
{
-#define IXGBE_MAX_SECRX_POLL 30
- int i;
- int secrxreg;
DEBUGFUNC("ixgbe_enable_rx_dma_82599");
* the Rx DMA unit. Therefore, make sure the security engine is
* completely disabled prior to enabling the Rx unit.
*/
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
- if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
- break;
- else
- /* Use interrupt-safe sleep just in case */
- usec_delay(10);
- }
- /* For informational purposes only */
- if (i >= IXGBE_MAX_SECRX_POLL)
- DEBUGOUT("Rx unit being enabled before security "
- "path fully disabled. Continuing with init.\n");
+ hw->mac.ops.disable_sec_rx_path(hw);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- IXGBE_WRITE_FLUSH(hw);
+ if (regval & IXGBE_RXCTRL_RXEN)
+ ixgbe_enable_rx(hw);
+ else
+ ixgbe_disable_rx(hw);
+
+ hw->mac.ops.enable_sec_rx_path(hw);
return IXGBE_SUCCESS;
}
/**
- * ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ * ixgbe_verify_fw_version_82599 - verify FW version for 82599
* @hw: pointer to hardware structure
*
* Verifies that installed the firmware version is 0.6 or higher
* Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
* if the FW version is not supported.
**/
-static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_EEPROM_VERSION;
u16 fw_offset, fw_ptp_cfg_offset;
- u16 fw_version = 0;
+ u16 fw_version;
DEBUGFUNC("ixgbe_verify_fw_version_82599");
}
/* get the offset to the Firmware Module block */
- hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+ if (hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", IXGBE_FW_PTR);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
if ((fw_offset == 0) || (fw_offset == 0xFFFF))
goto fw_version_out;
/* get the offset to the Pass Through Patch Configuration block */
- hw->eeprom.ops.read(hw, (fw_offset +
- IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
- &fw_ptp_cfg_offset);
+ if (hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+ &fw_ptp_cfg_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
goto fw_version_out;
/* get the firmware version */
- hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
- IXGBE_FW_PATCH_VERSION_4),
- &fw_version);
+ if (hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+ IXGBE_FW_PATCH_VERSION_4), &fw_version)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
if (fw_version > 0x5)
status = IXGBE_SUCCESS;
* ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
* @hw: pointer to hardware structure
*
- * Returns TRUE if the LESM FW module is present and enabled. Otherwise
- * returns FALSE. Smart Speed must be disabled if LESM FW module is enabled.
+ * Returns true if the LESM FW module is present and enabled. Otherwise
+ * returns false. Smart Speed must be disabled if LESM FW module is enabled.
**/
bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
{
- bool lesm_enabled = FALSE;
+ bool lesm_enabled = false;
u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
s32 status;
/* get the offset to the LESM Parameters block */
status = hw->eeprom.ops.read(hw, (fw_offset +
- IXGBE_FW_LESM_PARAMETERS_PTR),
- &fw_lesm_param_offset);
+ IXGBE_FW_LESM_PARAMETERS_PTR),
+ &fw_lesm_param_offset);
if ((status != IXGBE_SUCCESS) ||
(fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
goto out;
- /* get the lesm state word */
+ /* get the LESM state word */
status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
- IXGBE_FW_LESM_STATE_1),
- &fw_lesm_state);
+ IXGBE_FW_LESM_STATE_1),
+ &fw_lesm_state);
if ((status == IXGBE_SUCCESS) &&
(fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
- lesm_enabled = TRUE;
+ lesm_enabled = true;
out:
return lesm_enabled;
*
* Retrieves 16 bit word(s) read from EEPROM
**/
-static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
*
* Reads a 16 bit word from the EEPROM
**/
-static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
u16 offset, u16 *data)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
return ret_val;
}
+
+/**
+ * ixgbe_reset_pipeline_82599 - perform pipeline reset
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Reset pipeline by asserting Restart_AN together with LMS change to ensure
+ * full pipeline reset. This function assumes the SW/FW lock is held.
+ **/
+s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val;
+ u32 anlp1_reg = 0;
+ u32 i, autoc_reg, autoc2_reg;
+
+ /* Enable link if disabled in NVM */
+ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+ autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+ autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
+ /* Wait for AN to leave state 0 */
+ for (i = 0; i < 10; i++) {
+ msec_delay(4);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
+ break;
+ }
+
+ if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
+ DEBUGOUT("auto negotiation not completed\n");
+ ret_val = IXGBE_ERR_RESET_FAILED;
+ goto reset_pipeline_out;
+ }
+
+ ret_val = IXGBE_SUCCESS;
+
+reset_pipeline_out:
+ /* Write AUTOC register with original LMS field and Restart_AN */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return ret_val;
+}
+
+
+/**
+ * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_read_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_write_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
git.droids-corp.org / dpdk.git / blobdiff