#include "ixgbe_api.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-#ident "$Id: ixgbe_82599.c,v 1.334 2013/12/04 22:34:00 jtkirshe Exp $"
#define IXGBE_82599_MAX_TX_QUEUES 128
#define IXGBE_82599_MAX_RX_QUEUES 128
u16 offset, u16 *data);
STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
-
-bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
-{
- u32 fwsm, manc, factps;
-
- fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
- if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
- return false;
-
- manc = IXGBE_READ_REG(hw, IXGBE_MANC);
- if (!(manc & IXGBE_MANC_RCV_TCO_EN))
- return false;
-
- factps = IXGBE_READ_REG(hw, IXGBE_FACTPS);
- if (factps & IXGBE_FACTPS_MNGCG)
- return false;
-
- return true;
-}
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
!ixgbe_mng_enabled(hw)) {
mac->ops.disable_tx_laser =
- &ixgbe_disable_tx_laser_multispeed_fiber;
+ ixgbe_disable_tx_laser_multispeed_fiber;
mac->ops.enable_tx_laser =
- &ixgbe_enable_tx_laser_multispeed_fiber;
- mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
+ ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = ixgbe_flap_tx_laser_multispeed_fiber;
} else {
mac->ops.disable_tx_laser = NULL;
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
- mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
} else {
if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
hw->phy.smart_speed == ixgbe_smart_speed_on) &&
!ixgbe_verify_lesm_fw_enabled_82599(hw)) {
- mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+ mac->ops.setup_link = ixgbe_setup_mac_link_smartspeed;
} else {
- mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+ mac->ops.setup_link = ixgbe_setup_mac_link_82599;
}
}
}
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
s32 ret_val = IXGBE_SUCCESS;
+ u32 esdp;
DEBUGFUNC("ixgbe_init_phy_ops_82599");
+ if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+ /* Store flag indicating I2C bus access control unit. */
+ hw->phy.qsfp_shared_i2c_bus = TRUE;
+
+ /* Initialize access to QSFP+ I2C bus */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0_DIR;
+ esdp &= ~IXGBE_ESDP_SDP1_DIR;
+ esdp &= ~IXGBE_ESDP_SDP0;
+ esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+ esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_82599;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_82599;
+ }
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
/* If copper media, overwrite with copper function pointers */
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
- mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+ mac->ops.setup_link = ixgbe_setup_copper_link_82599;
mac->ops.get_link_capabilities =
- &ixgbe_get_copper_link_capabilities_generic;
+ ixgbe_get_copper_link_capabilities_generic;
}
- /* Set necessary function pointers based on phy type */
+ /* Set necessary function pointers based on PHY type */
switch (hw->phy.type) {
case ixgbe_phy_tn:
- phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
- phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = ixgbe_check_phy_link_tnx;
phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_tnx;
+ ixgbe_get_phy_firmware_version_tnx;
break;
default:
break;
* @locked: bool to indicate whether the SW/FW lock was already taken by
* previous proc_autoc_read_82599.
*
- * This part (82599) may need to hold a the SW/FW lock around all writes to
+ * This part (82599) may need to hold the SW/FW lock around all writes to
* AUTOC. Likewise after a write we need to do a pipeline reset.
*/
s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
ret_val = ixgbe_init_ops_generic(hw);
/* PHY */
- phy->ops.identify = &ixgbe_identify_phy_82599;
- phy->ops.init = &ixgbe_init_phy_ops_82599;
+ phy->ops.identify = ixgbe_identify_phy_82599;
+ phy->ops.init = ixgbe_init_phy_ops_82599;
/* MAC */
- mac->ops.reset_hw = &ixgbe_reset_hw_82599;
- mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_gen2;
- mac->ops.get_media_type = &ixgbe_get_media_type_82599;
+ mac->ops.reset_hw = ixgbe_reset_hw_82599;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+ mac->ops.get_media_type = ixgbe_get_media_type_82599;
mac->ops.get_supported_physical_layer =
- &ixgbe_get_supported_physical_layer_82599;
- mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic;
- mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic;
- mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599;
- mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599;
- mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599;
- mac->ops.start_hw = &ixgbe_start_hw_82599;
- mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic;
- mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic;
- mac->ops.get_device_caps = &ixgbe_get_device_caps_generic;
- mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic;
- mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic;
- mac->ops.prot_autoc_read = &prot_autoc_read_82599;
- mac->ops.prot_autoc_write = &prot_autoc_write_82599;
+ ixgbe_get_supported_physical_layer_82599;
+ mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+ mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82599;
+ mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82599;
+ mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82599;
+ mac->ops.start_hw = ixgbe_start_hw_82599;
+ mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+ mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+ mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+ mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+ mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.prot_autoc_read = prot_autoc_read_82599;
+ mac->ops.prot_autoc_write = prot_autoc_write_82599;
/* RAR, Multicast, VLAN */
- mac->ops.set_vmdq = &ixgbe_set_vmdq_generic;
- mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic;
- mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic;
- mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic;
+ mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+ mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
mac->rar_highwater = 1;
- mac->ops.set_vfta = &ixgbe_set_vfta_generic;
- mac->ops.set_vlvf = &ixgbe_set_vlvf_generic;
- mac->ops.clear_vfta = &ixgbe_clear_vfta_generic;
- mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic;
- mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599;
- mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing;
- mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing;
+ mac->ops.set_vfta = ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+ mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+ mac->ops.setup_sfp = ixgbe_setup_sfp_modules_82599;
+ mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+ mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
/* Link */
- mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599;
- mac->ops.check_link = &ixgbe_check_mac_link_generic;
- mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82599;
+ mac->ops.check_link = ixgbe_check_mac_link_generic;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
ixgbe_init_mac_link_ops_82599(hw);
mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
/* EEPROM */
- eeprom->ops.read = &ixgbe_read_eeprom_82599;
- eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599;
+ eeprom->ops.read = ixgbe_read_eeprom_82599;
+ eeprom->ops.read_buffer = ixgbe_read_eeprom_buffer_82599;
/* Manageability interface */
- mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic;
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+ mac->ops.get_thermal_sensor_data =
+ ixgbe_get_thermal_sensor_data_generic;
+ mac->ops.init_thermal_sensor_thresh =
+ ixgbe_init_thermal_sensor_thresh_generic;
- mac->ops.get_rtrup2tc = &ixgbe_dcb_get_rtrup2tc_generic;
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
return ret_val;
}
/* Check if 1G SFP module. */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
-#ifdef SUPPORT_1000BASE_LX
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
-#endif
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*speed |= IXGBE_LINK_SPEED_10GB_FULL |
IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = true;
+ /* QSFP must not enable full auto-negotiation
+ * Limited autoneg is enabled at 1G
+ */
+ if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+ *autoneg = false;
+ else
+ *autoneg = true;
}
out:
case IXGBE_DEV_ID_82599_T3_LOM:
media_type = ixgbe_media_type_copper;
break;
+ case IXGBE_DEV_ID_82599_LS:
+ media_type = ixgbe_media_type_fiber_lco;
+ break;
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ media_type = ixgbe_media_type_fiber_qsfp;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
if (ixgbe_check_reset_blocked(hw))
return;
- /* Disable tx laser; allow 100us to go dark per spec */
+ /* Disable Tx laser; allow 100us to go dark per spec */
esdp_reg |= IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /* Enable tx laser; allow 100ms to light up */
+ /* Enable Tx laser; allow 100ms to light up */
esdp_reg &= ~IXGBE_ESDP_SDP3;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
* When the driver changes the link speeds that it can support,
* it sets autotry_restart to true to indicate that we need to
* initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
+ * so, we set the speed then disable and re-enable the Tx laser, to
* alert the link partner that it also needs to restart autotry on its
* end. This is consistent with true clause 37 autoneg, which also
* involves a loss of signal.
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects MAC link speed */
+ break;
default:
DEBUGOUT("Unexpected media type.\n");
break;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
IXGBE_WRITE_FLUSH(hw);
break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects link speed */
+ break;
default:
DEBUGOUT("Unexpected media type.\n");
break;
if (status != IXGBE_SUCCESS)
return status;
- /* Flap the tx laser if it has not already been done */
+ /* Flap the Tx laser if it has not already been done */
ixgbe_flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
(pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
autoc &= ~IXGBE_AUTOC_LMS_MASK;
- if (autoneg)
+ if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel)
autoc |= IXGBE_AUTOC_LMS_1G_AN;
else
autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
return status;
}
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ */
+STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ IXGBE_FDIRCMD_CMD_MASK))
+ return IXGBE_SUCCESS;
+ usec_delay(10);
+ }
+
+ return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
/**
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
* @hw: pointer to hardware structure
**/
s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
{
+ s32 err;
int i;
u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
* Before starting reinitialization process,
* FDIRCMD.CMD must be zero.
*/
- for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- IXGBE_FDIRCMD_CMD_MASK))
- break;
- usec_delay(10);
- }
- if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- DEBUGOUT("Flow Director previous command isn't complete, "
- "aborting table re-initialization.\n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
+ return err;
}
IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
* @hw: pointer to hardware structure
* @fdirctrl: value to write to flow director control register, initially
* contains just the value of the Rx packet buffer allocation
- * @cloud_mode: true - cloude mode, false - other mode
+ * @cloud_mode: true - cloud mode, false - other mode
**/
s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
bool cloud_mode)
(0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
(4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+ if (cloud_mode)
+ fdirctrl |=(IXGBE_FDIRCTRL_FILTERMODE_CLOUD <<
+ IXGBE_FDIRCTRL_FILTERMODE_SHIFT);
/* write hashes and fdirctrl register, poll for completion */
ixgbe_fdir_enable_82599(hw, fdirctrl);
bucket_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
sig_hash ^= hi_hash_dword << (16 - n); \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
*
* This function is almost identical to the function above but contains
- * several optomizations such as unwinding all of the loops, letting the
+ * several optimizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
union ixgbe_atr_hash_dword common,
u8 queue)
{
- u64 fdirhashcmd;
- u32 fdircmd;
+ u64 fdirhashcmd;
+ u32 fdircmd;
+ s32 err;
DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599");
fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
return IXGBE_SUCCESS;
bucket_hash ^= lo_hash_dword >> n; \
if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
bucket_hash ^= hi_hash_dword >> n; \
-} while (0);
+} while (0)
/**
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
* @atr_input: input bitstream to compute the hash on
* @input_mask: mask for the input bitstream
*
- * This function serves two main purposes. First it applys the input_mask
+ * This function serves two main purposes. First it applies the input_mask
* to the atr_input resulting in a cleaned up atr_input data stream.
* Secondly it computes the hash and stores it in the bkt_hash field at
* the end of the input byte stream. This way it will be available for
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
+ * so we do not add the VLAN until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
}
/**
- * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
* @input_mask: mask to be bit swapped
*
* The source and destination port masks for flow director are bit swapped
/* mask IPv6 since it is currently not supported */
u32 fdirm = IXGBE_FDIRM_DIPv6;
u32 fdirtcpm;
+ u32 fdirip6m;
DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
/*
return IXGBE_ERR_CONFIG;
}
+ if (cloud_mode) {
+ fdirm |= IXGBE_FDIRM_L3P;
+ fdirip6m = ((u32) 0xFFFFU << IXGBE_FDIRIP6M_DIPM_SHIFT);
+ fdirip6m |= IXGBE_FDIRIP6M_ALWAYS_MASK;
+
+ switch (input_mask->formatted.inner_mac[0] & 0xFF) {
+ case 0x00:
+ /* Mask inner MAC, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_INNER_MAC;
+ case 0xFF:
+ break;
+ default:
+ DEBUGOUT(" Error on inner_mac byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tni_vni & 0xFFFFFFFF) {
+ case 0x0:
+ /* Mask vxlan id */
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI;
+ break;
+ case 0x00FFFFFF:
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI_24;
+ break;
+ case 0xFFFFFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on TNI/VNI byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tunnel_type & 0xFFFF) {
+ case 0x0:
+ /* Mask turnnel type, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_TUNNEL_TYPE;
+ case 0xFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on tunnel type byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIP6M, fdirip6m);
+ }
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
/* write both the same so that UDP and TCP use the same mask */
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+ /* also use it for SCTP */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+ break;
+ default:
+ break;
+ }
- /* store source and destination IP masks (big-enian) */
+ /* store source and destination IP masks (big-endian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_mask->formatted.src_ip[0]);
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
u16 soft_id, u8 queue, bool cloud_mode)
{
u32 fdirport, fdirvlan, fdirhash, fdircmd;
+ u32 addr_low, addr_high;
+ u32 cloud_type = 0;
+ s32 err;
DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
fdirport |= IXGBE_NTOHS(input->formatted.src_port);
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
- /* record vlan (little-endian) and flex_bytes(big-endian) */
+ /* record VLAN (little-endian) and flex_bytes(big-endian) */
fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+ if (cloud_mode) {
+ if (input->formatted.tunnel_type != 0)
+ cloud_type = 0x80000000;
+
+ addr_low = ((u32)input->formatted.inner_mac[0] |
+ ((u32)input->formatted.inner_mac[1] << 8) |
+ ((u32)input->formatted.inner_mac[2] << 16) |
+ ((u32)input->formatted.inner_mac[3] << 24));
+ addr_high = ((u32)input->formatted.inner_mac[4] |
+ ((u32)input->formatted.inner_mac[5] << 8));
+ cloud_type |= addr_high;
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), addr_low);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), cloud_type);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), input->formatted.tni_vni);
+ }
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
return IXGBE_SUCCESS;
}
{
u32 fdirhash;
u32 fdircmd = 0;
- u32 retry_count;
- s32 err = IXGBE_SUCCESS;
+ s32 err;
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
/* Query if filter is present */
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
- for (retry_count = 10; retry_count; retry_count--) {
- /* allow 10us for query to process */
- usec_delay(10);
- /* verify query completed successfully */
- fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
- if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
- break;
+ err = ixgbe_fdir_check_cmd_complete(hw);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
}
- if (!retry_count)
- err = IXGBE_ERR_FDIR_REINIT_FAILED;
-
/* if filter exists in hardware then remove it */
if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
}
- return err;
+ return IXGBE_SUCCESS;
}
/**
if (status != IXGBE_SUCCESS) {
/* 82599 10GBASE-T requires an external PHY */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
- goto out;
+ return status;
else
status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.type = ixgbe_phy_none;
- status = IXGBE_SUCCESS;
+ return IXGBE_SUCCESS;
}
/* Return error if SFP module has been detected but is not supported */
if (hw->phy.type == ixgbe_phy_sfp_unsupported)
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
-out:
return status;
}
u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u16 ext_ability = 0;
- u8 comp_codes_10g = 0;
- u8 comp_codes_1g = 0;
DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
/* SFP check must be done last since DA modules are sometimes used to
* test KR mode - we need to id KR mode correctly before SFP module.
* Call identify_sfp because the pluggable module may have changed */
- hw->phy.ops.identify_sfp(hw);
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- goto out;
-
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_phy_sfp_ftl_active:
- case ixgbe_phy_sfp_active_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
- break;
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
- else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
- break;
- default:
- break;
- }
-
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
out:
return physical_layer;
}
}
/**
- * ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ * ixgbe_verify_fw_version_82599 - verify FW version for 82599
* @hw: pointer to hardware structure
*
* Verifies that installed the firmware version is 0.6 or higher
(fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
goto out;
- /* get the lesm state word */
+ /* get the LESM state word */
status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
IXGBE_FW_LESM_STATE_1),
&fw_lesm_state);
}
+/**
+ * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_read_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_write_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
git.droids-corp.org / dpdk.git / blobdiff