-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Derived from FreeBSD's bufring.h
- *
- **************************************************************************
+/* SPDX-License-Identifier: BSD-3-Clause
*
+ * Copyright (c) 2010-2020 Intel Corporation
* Copyright (c) 2007-2009 Kip Macy kmacy@freebsd.org
* All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. The name of Kip Macy nor the names of other
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ***************************************************************************/
+ * Derived from FreeBSD's bufring.h
+ * Used as BSD-3 Licensed with permission from Kip Macy.
+ */
#ifndef _RTE_RING_H_
#define _RTE_RING_H_
* - Multi- or single-producer enqueue.
* - Bulk dequeue.
* - Bulk enqueue.
+ * - Ability to select different sync modes for producer/consumer.
+ * - Dequeue start/finish (depending on consumer sync modes).
+ * - Enqueue start/finish (depending on producer sync mode).
*
- * Note: the ring implementation is not preemptable. A lcore must not
- * be interrupted by another task that uses the same ring.
+ * Note: the ring implementation is not preemptible. Refer to Programmer's
+ * guide/Environment Abstraction Layer/Multiple pthread/Known Issues/rte_ring
+ * for more information.
*
*/
extern "C" {
#endif
-#include <stdio.h>
-#include <stdint.h>
-#include <sys/queue.h>
-#include <errno.h>
-#include <rte_common.h>
-#include <rte_memory.h>
-#include <rte_lcore.h>
-#include <rte_atomic.h>
-#include <rte_branch_prediction.h>
-
-enum rte_ring_queue_behavior {
- RTE_RING_QUEUE_FIXED = 0, /* Enq/Deq a fixed number of items from a ring */
- RTE_RING_QUEUE_VARIABLE /* Enq/Deq as many items a possible from ring */
-};
-
-#ifdef RTE_LIBRTE_RING_DEBUG
-/**
- * A structure that stores the ring statistics (per-lcore).
- */
-struct rte_ring_debug_stats {
- uint64_t enq_success_bulk; /**< Successful enqueues number. */
- uint64_t enq_success_objs; /**< Objects successfully enqueued. */
- uint64_t enq_quota_bulk; /**< Successful enqueues above watermark. */
- uint64_t enq_quota_objs; /**< Objects enqueued above watermark. */
- uint64_t enq_fail_bulk; /**< Failed enqueues number. */
- uint64_t enq_fail_objs; /**< Objects that failed to be enqueued. */
- uint64_t deq_success_bulk; /**< Successful dequeues number. */
- uint64_t deq_success_objs; /**< Objects successfully dequeued. */
- uint64_t deq_fail_bulk; /**< Failed dequeues number. */
- uint64_t deq_fail_objs; /**< Objects that failed to be dequeued. */
-} __rte_cache_aligned;
-#endif
-
-#define RTE_RING_NAMESIZE 32 /**< The maximum length of a ring name. */
-#define RTE_RING_MZ_PREFIX "RG_"
-
-#ifndef RTE_RING_PAUSE_REP_COUNT
-#define RTE_RING_PAUSE_REP_COUNT 0 /**< Yield after pause num of times, no yield
- * if RTE_RING_PAUSE_REP not defined. */
-#endif
-
-/**
- * An RTE ring structure.
- *
- * The producer and the consumer have a head and a tail index. The particularity
- * of these index is that they are not between 0 and size(ring). These indexes
- * are between 0 and 2^32, and we mask their value when we access the ring[]
- * field. Thanks to this assumption, we can do subtractions between 2 index
- * values in a modulo-32bit base: that's why the overflow of the indexes is not
- * a problem.
- */
-struct rte_ring {
- char name[RTE_RING_NAMESIZE]; /**< Name of the ring. */
- int flags; /**< Flags supplied at creation. */
-
- /** Ring producer status. */
- struct prod {
- uint32_t watermark; /**< Maximum items before EDQUOT. */
- uint32_t sp_enqueue; /**< True, if single producer. */
- uint32_t size; /**< Size of ring. */
- uint32_t mask; /**< Mask (size-1) of ring. */
- volatile uint32_t head; /**< Producer head. */
- volatile uint32_t tail; /**< Producer tail. */
- } prod __rte_cache_aligned;
-
- /** Ring consumer status. */
- struct cons {
- uint32_t sc_dequeue; /**< True, if single consumer. */
- uint32_t size; /**< Size of the ring. */
- uint32_t mask; /**< Mask (size-1) of ring. */
- volatile uint32_t head; /**< Consumer head. */
- volatile uint32_t tail; /**< Consumer tail. */
-#ifdef RTE_RING_SPLIT_PROD_CONS
- } cons __rte_cache_aligned;
-#else
- } cons;
-#endif
-
-#ifdef RTE_LIBRTE_RING_DEBUG
- struct rte_ring_debug_stats stats[RTE_MAX_LCORE];
-#endif
-
- void * ring[0] __rte_cache_aligned; /**< Memory space of ring starts here.
- * not volatile so need to be careful
- * about compiler re-ordering */
-};
-
-#define RING_F_SP_ENQ 0x0001 /**< The default enqueue is "single-producer". */
-#define RING_F_SC_DEQ 0x0002 /**< The default dequeue is "single-consumer". */
-#define RTE_RING_QUOT_EXCEED (1 << 31) /**< Quota exceed for burst ops */
-#define RTE_RING_SZ_MASK (unsigned)(0x0fffffff) /**< Ring size mask */
-
-/**
- * @internal When debug is enabled, store ring statistics.
- * @param r
- * A pointer to the ring.
- * @param name
- * The name of the statistics field to increment in the ring.
- * @param n
- * The number to add to the object-oriented statistics.
- */
-#ifdef RTE_LIBRTE_RING_DEBUG
-#define __RING_STAT_ADD(r, name, n) do { \
- unsigned __lcore_id = rte_lcore_id(); \
- if (__lcore_id < RTE_MAX_LCORE) { \
- r->stats[__lcore_id].name##_objs += n; \
- r->stats[__lcore_id].name##_bulk += 1; \
- } \
- } while(0)
-#else
-#define __RING_STAT_ADD(r, name, n) do {} while(0)
-#endif
+#include <rte_ring_core.h>
/**
* Calculate the memory size needed for a ring
* The number of elements in the ring (must be a power of 2).
* @param flags
* An OR of the following:
- * - RING_F_SP_ENQ: If this flag is set, the default behavior when
- * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
- * is "single-producer". Otherwise, it is "multi-producers".
- * - RING_F_SC_DEQ: If this flag is set, the default behavior when
- * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
- * is "single-consumer". Otherwise, it is "multi-consumers".
+ * - One of mutually exclusive flags that define producer behavior:
+ * - RING_F_SP_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "single-producer".
+ * - RING_F_MP_RTS_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "multi-producer RTS mode".
+ * - RING_F_MP_HTS_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "multi-producer HTS mode".
+ * If none of these flags is set, then default "multi-producer"
+ * behavior is selected.
+ * - One of mutually exclusive flags that define consumer behavior:
+ * - RING_F_SC_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "single-consumer". Otherwise, it is "multi-consumers".
+ * - RING_F_MC_RTS_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "multi-consumer RTS mode".
+ * - RING_F_MC_HTS_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "multi-consumer HTS mode".
+ * If none of these flags is set, then default "multi-consumer"
+ * behavior is selected.
* @return
* 0 on success, or a negative value on error.
*/
* constraint for the reserved zone.
* @param flags
* An OR of the following:
- * - RING_F_SP_ENQ: If this flag is set, the default behavior when
- * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
- * is "single-producer". Otherwise, it is "multi-producers".
- * - RING_F_SC_DEQ: If this flag is set, the default behavior when
- * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
- * is "single-consumer". Otherwise, it is "multi-consumers".
+ * - One of mutually exclusive flags that define producer behavior:
+ * - RING_F_SP_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "single-producer".
+ * - RING_F_MP_RTS_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "multi-producer RTS mode".
+ * - RING_F_MP_HTS_ENQ: If this flag is set, the default behavior when
+ * using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
+ * is "multi-producer HTS mode".
+ * If none of these flags is set, then default "multi-producer"
+ * behavior is selected.
+ * - One of mutually exclusive flags that define consumer behavior:
+ * - RING_F_SC_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "single-consumer". Otherwise, it is "multi-consumers".
+ * - RING_F_MC_RTS_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "multi-consumer RTS mode".
+ * - RING_F_MC_HTS_DEQ: If this flag is set, the default behavior when
+ * using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
+ * is "multi-consumer HTS mode".
+ * If none of these flags is set, then default "multi-consumer"
+ * behavior is selected.
* @return
* On success, the pointer to the new allocated ring. NULL on error with
* rte_errno set appropriately. Possible errno values include:
* - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
* - E_RTE_SECONDARY - function was called from a secondary process instance
- * - E_RTE_NO_TAILQ - no tailq list could be got for the ring list
* - EINVAL - count provided is not a power of 2
* - ENOSPC - the maximum number of memzones has already been allocated
* - EEXIST - a memzone with the same name already exists
int socket_id, unsigned flags);
/**
- * Change the high water mark.
- *
- * If *count* is 0, water marking is disabled. Otherwise, it is set to the
- * *count* value. The *count* value must be greater than 0 and less
- * than the ring size.
- *
- * This function can be called at any time (not necessarily at
- * initialization).
+ * De-allocate all memory used by the ring.
*
* @param r
- * A pointer to the ring structure.
- * @param count
- * The new water mark value.
- * @return
- * - 0: Success; water mark changed.
- * - -EINVAL: Invalid water mark value.
+ * Ring to free
*/
-int rte_ring_set_water_mark(struct rte_ring *r, unsigned count);
+void rte_ring_free(struct rte_ring *r);
/**
- * Dump the status of the ring to the console.
+ * Dump the status of the ring to a file.
*
* @param f
* A pointer to a file for output
/* the actual enqueue of pointers on the ring.
* Placed here since identical code needed in both
* single and multi producer enqueue functions */
-#define ENQUEUE_PTRS() do { \
- const uint32_t size = r->prod.size; \
- uint32_t idx = prod_head & mask; \
+#define ENQUEUE_PTRS(r, ring_start, prod_head, obj_table, n, obj_type) do { \
+ unsigned int i; \
+ const uint32_t size = (r)->size; \
+ uint32_t idx = prod_head & (r)->mask; \
+ obj_type *ring = (obj_type *)ring_start; \
if (likely(idx + n < size)) { \
for (i = 0; i < (n & ((~(unsigned)0x3))); i+=4, idx+=4) { \
- r->ring[idx] = obj_table[i]; \
- r->ring[idx+1] = obj_table[i+1]; \
- r->ring[idx+2] = obj_table[i+2]; \
- r->ring[idx+3] = obj_table[i+3]; \
+ ring[idx] = obj_table[i]; \
+ ring[idx+1] = obj_table[i+1]; \
+ ring[idx+2] = obj_table[i+2]; \
+ ring[idx+3] = obj_table[i+3]; \
} \
switch (n & 0x3) { \
- case 3: r->ring[idx++] = obj_table[i++]; \
- case 2: r->ring[idx++] = obj_table[i++]; \
- case 1: r->ring[idx++] = obj_table[i++]; \
+ case 3: \
+ ring[idx++] = obj_table[i++]; /* fallthrough */ \
+ case 2: \
+ ring[idx++] = obj_table[i++]; /* fallthrough */ \
+ case 1: \
+ ring[idx++] = obj_table[i++]; \
} \
} else { \
for (i = 0; idx < size; i++, idx++)\
- r->ring[idx] = obj_table[i]; \
+ ring[idx] = obj_table[i]; \
for (idx = 0; i < n; i++, idx++) \
- r->ring[idx] = obj_table[i]; \
+ ring[idx] = obj_table[i]; \
} \
-} while(0)
+} while (0)
/* the actual copy of pointers on the ring to obj_table.
* Placed here since identical code needed in both
* single and multi consumer dequeue functions */
-#define DEQUEUE_PTRS() do { \
- uint32_t idx = cons_head & mask; \
- const uint32_t size = r->cons.size; \
+#define DEQUEUE_PTRS(r, ring_start, cons_head, obj_table, n, obj_type) do { \
+ unsigned int i; \
+ uint32_t idx = cons_head & (r)->mask; \
+ const uint32_t size = (r)->size; \
+ obj_type *ring = (obj_type *)ring_start; \
if (likely(idx + n < size)) { \
for (i = 0; i < (n & (~(unsigned)0x3)); i+=4, idx+=4) {\
- obj_table[i] = r->ring[idx]; \
- obj_table[i+1] = r->ring[idx+1]; \
- obj_table[i+2] = r->ring[idx+2]; \
- obj_table[i+3] = r->ring[idx+3]; \
+ obj_table[i] = ring[idx]; \
+ obj_table[i+1] = ring[idx+1]; \
+ obj_table[i+2] = ring[idx+2]; \
+ obj_table[i+3] = ring[idx+3]; \
} \
switch (n & 0x3) { \
- case 3: obj_table[i++] = r->ring[idx++]; \
- case 2: obj_table[i++] = r->ring[idx++]; \
- case 1: obj_table[i++] = r->ring[idx++]; \
+ case 3: \
+ obj_table[i++] = ring[idx++]; /* fallthrough */ \
+ case 2: \
+ obj_table[i++] = ring[idx++]; /* fallthrough */ \
+ case 1: \
+ obj_table[i++] = ring[idx++]; \
} \
} else { \
for (i = 0; idx < size; i++, idx++) \
- obj_table[i] = r->ring[idx]; \
+ obj_table[i] = ring[idx]; \
for (idx = 0; i < n; i++, idx++) \
- obj_table[i] = r->ring[idx]; \
+ obj_table[i] = ring[idx]; \
} \
} while (0)
-/**
- * @internal Enqueue several objects on the ring (multi-producers safe).
- *
- * This function uses a "compare and set" instruction to move the
- * producer index atomically.
- *
- * @param r
- * A pointer to the ring structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects).
- * @param n
- * The number of objects to add in the ring from the obj_table.
- * @param behavior
- * RTE_RING_QUEUE_FIXED: Enqueue a fixed number of items from a ring
- * RTE_RING_QUEUE_VARIABLE: Enqueue as many items a possible from ring
- * @return
- * Depend on the behavior value
- * if behavior = RTE_RING_QUEUE_FIXED
- * - 0: Success; objects enqueue.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
- * - -ENOBUFS: Not enough room in the ring to enqueue, no object is enqueued.
- * if behavior = RTE_RING_QUEUE_VARIABLE
- * - n: Actual number of objects enqueued.
+/* Between load and load. there might be cpu reorder in weak model
+ * (powerpc/arm).
+ * There are 2 choices for the users
+ * 1.use rmb() memory barrier
+ * 2.use one-direction load_acquire/store_release barrier,defined by
+ * CONFIG_RTE_USE_C11_MEM_MODEL=y
+ * It depends on performance test results.
+ * By default, move common functions to rte_ring_generic.h
*/
-static inline int __attribute__((always_inline))
-__rte_ring_mp_do_enqueue(struct rte_ring *r, void * const *obj_table,
- unsigned n, enum rte_ring_queue_behavior behavior)
-{
- uint32_t prod_head, prod_next;
- uint32_t cons_tail, free_entries;
- const unsigned max = n;
- int success;
- unsigned i, rep = 0;
- uint32_t mask = r->prod.mask;
- int ret;
-
- /* move prod.head atomically */
- do {
- /* Reset n to the initial burst count */
- n = max;
-
- prod_head = r->prod.head;
- cons_tail = r->cons.tail;
- /* The subtraction is done between two unsigned 32bits value
- * (the result is always modulo 32 bits even if we have
- * prod_head > cons_tail). So 'free_entries' is always between 0
- * and size(ring)-1. */
- free_entries = (mask + cons_tail - prod_head);
-
- /* check that we have enough room in ring */
- if (unlikely(n > free_entries)) {
- if (behavior == RTE_RING_QUEUE_FIXED) {
- __RING_STAT_ADD(r, enq_fail, n);
- return -ENOBUFS;
- }
- else {
- /* No free entry available */
- if (unlikely(free_entries == 0)) {
- __RING_STAT_ADD(r, enq_fail, n);
- return 0;
- }
-
- n = free_entries;
- }
- }
-
- prod_next = prod_head + n;
- success = rte_atomic32_cmpset(&r->prod.head, prod_head,
- prod_next);
- } while (unlikely(success == 0));
-
- /* write entries in ring */
- ENQUEUE_PTRS();
- rte_compiler_barrier();
-
- /* if we exceed the watermark */
- if (unlikely(((mask + 1) - free_entries + n) > r->prod.watermark)) {
- ret = (behavior == RTE_RING_QUEUE_FIXED) ? -EDQUOT :
- (int)(n | RTE_RING_QUOT_EXCEED);
- __RING_STAT_ADD(r, enq_quota, n);
- }
- else {
- ret = (behavior == RTE_RING_QUEUE_FIXED) ? 0 : n;
- __RING_STAT_ADD(r, enq_success, n);
- }
-
- /*
- * If there are other enqueues in progress that preceded us,
- * we need to wait for them to complete
- */
- while (unlikely(r->prod.tail != prod_head)) {
- rte_pause();
-
- /* Set RTE_RING_PAUSE_REP_COUNT to avoid spin too long waiting
- * for other thread finish. It gives pre-empted thread a chance
- * to proceed and finish with ring dequeue operation. */
- if (RTE_RING_PAUSE_REP_COUNT &&
- ++rep == RTE_RING_PAUSE_REP_COUNT) {
- rep = 0;
- sched_yield();
- }
- }
- r->prod.tail = prod_next;
- return ret;
-}
+#ifdef RTE_USE_C11_MEM_MODEL
+#include "rte_ring_c11_mem.h"
+#else
+#include "rte_ring_generic.h"
+#endif
/**
- * @internal Enqueue several objects on a ring (NOT multi-producers safe).
+ * @internal Enqueue several objects on the ring
*
- * @param r
+ * @param r
* A pointer to the ring structure.
* @param obj_table
* A pointer to a table of void * pointers (objects).
* The number of objects to add in the ring from the obj_table.
* @param behavior
* RTE_RING_QUEUE_FIXED: Enqueue a fixed number of items from a ring
- * RTE_RING_QUEUE_VARIABLE: Enqueue as many items a possible from ring
- * @return
- * Depend on the behavior value
- * if behavior = RTE_RING_QUEUE_FIXED
- * - 0: Success; objects enqueue.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
- * - -ENOBUFS: Not enough room in the ring to enqueue, no object is enqueued.
- * if behavior = RTE_RING_QUEUE_VARIABLE
- * - n: Actual number of objects enqueued.
- */
-static inline int __attribute__((always_inline))
-__rte_ring_sp_do_enqueue(struct rte_ring *r, void * const *obj_table,
- unsigned n, enum rte_ring_queue_behavior behavior)
-{
- uint32_t prod_head, cons_tail;
- uint32_t prod_next, free_entries;
- unsigned i;
- uint32_t mask = r->prod.mask;
- int ret;
-
- prod_head = r->prod.head;
- cons_tail = r->cons.tail;
- /* The subtraction is done between two unsigned 32bits value
- * (the result is always modulo 32 bits even if we have
- * prod_head > cons_tail). So 'free_entries' is always between 0
- * and size(ring)-1. */
- free_entries = mask + cons_tail - prod_head;
-
- /* check that we have enough room in ring */
- if (unlikely(n > free_entries)) {
- if (behavior == RTE_RING_QUEUE_FIXED) {
- __RING_STAT_ADD(r, enq_fail, n);
- return -ENOBUFS;
- }
- else {
- /* No free entry available */
- if (unlikely(free_entries == 0)) {
- __RING_STAT_ADD(r, enq_fail, n);
- return 0;
- }
-
- n = free_entries;
- }
- }
-
- prod_next = prod_head + n;
- r->prod.head = prod_next;
-
- /* write entries in ring */
- ENQUEUE_PTRS();
- rte_compiler_barrier();
-
- /* if we exceed the watermark */
- if (unlikely(((mask + 1) - free_entries + n) > r->prod.watermark)) {
- ret = (behavior == RTE_RING_QUEUE_FIXED) ? -EDQUOT :
- (int)(n | RTE_RING_QUOT_EXCEED);
- __RING_STAT_ADD(r, enq_quota, n);
- }
- else {
- ret = (behavior == RTE_RING_QUEUE_FIXED) ? 0 : n;
- __RING_STAT_ADD(r, enq_success, n);
- }
-
- r->prod.tail = prod_next;
- return ret;
-}
-
-/**
- * @internal Dequeue several objects from a ring (multi-consumers safe). When
- * the request objects are more than the available objects, only dequeue the
- * actual number of objects
- *
- * This function uses a "compare and set" instruction to move the
- * consumer index atomically.
- *
- * @param r
- * A pointer to the ring structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- * The number of objects to dequeue from the ring to the obj_table.
- * @param behavior
- * RTE_RING_QUEUE_FIXED: Dequeue a fixed number of items from a ring
- * RTE_RING_QUEUE_VARIABLE: Dequeue as many items a possible from ring
+ * RTE_RING_QUEUE_VARIABLE: Enqueue as many items as possible from ring
+ * @param is_sp
+ * Indicates whether to use single producer or multi-producer head update
+ * @param free_space
+ * returns the amount of space after the enqueue operation has finished
* @return
- * Depend on the behavior value
- * if behavior = RTE_RING_QUEUE_FIXED
- * - 0: Success; objects dequeued.
- * - -ENOENT: Not enough entries in the ring to dequeue; no object is
- * dequeued.
- * if behavior = RTE_RING_QUEUE_VARIABLE
- * - n: Actual number of objects dequeued.
+ * Actual number of objects enqueued.
+ * If behavior == RTE_RING_QUEUE_FIXED, this will be 0 or n only.
*/
-
-static inline int __attribute__((always_inline))
-__rte_ring_mc_do_dequeue(struct rte_ring *r, void **obj_table,
- unsigned n, enum rte_ring_queue_behavior behavior)
+static __rte_always_inline unsigned int
+__rte_ring_do_enqueue(struct rte_ring *r, void * const *obj_table,
+ unsigned int n, enum rte_ring_queue_behavior behavior,
+ unsigned int is_sp, unsigned int *free_space)
{
- uint32_t cons_head, prod_tail;
- uint32_t cons_next, entries;
- const unsigned max = n;
- int success;
- unsigned i, rep = 0;
- uint32_t mask = r->prod.mask;
-
- /* move cons.head atomically */
- do {
- /* Restore n as it may change every loop */
- n = max;
-
- cons_head = r->cons.head;
- prod_tail = r->prod.tail;
- /* The subtraction is done between two unsigned 32bits value
- * (the result is always modulo 32 bits even if we have
- * cons_head > prod_tail). So 'entries' is always between 0
- * and size(ring)-1. */
- entries = (prod_tail - cons_head);
-
- /* Set the actual entries for dequeue */
- if (n > entries) {
- if (behavior == RTE_RING_QUEUE_FIXED) {
- __RING_STAT_ADD(r, deq_fail, n);
- return -ENOENT;
- }
- else {
- if (unlikely(entries == 0)){
- __RING_STAT_ADD(r, deq_fail, n);
- return 0;
- }
-
- n = entries;
- }
- }
-
- cons_next = cons_head + n;
- success = rte_atomic32_cmpset(&r->cons.head, cons_head,
- cons_next);
- } while (unlikely(success == 0));
+ uint32_t prod_head, prod_next;
+ uint32_t free_entries;
- /* copy in table */
- DEQUEUE_PTRS();
- rte_compiler_barrier();
+ n = __rte_ring_move_prod_head(r, is_sp, n, behavior,
+ &prod_head, &prod_next, &free_entries);
+ if (n == 0)
+ goto end;
- /*
- * If there are other dequeues in progress that preceded us,
- * we need to wait for them to complete
- */
- while (unlikely(r->cons.tail != cons_head)) {
- rte_pause();
+ ENQUEUE_PTRS(r, &r[1], prod_head, obj_table, n, void *);
- /* Set RTE_RING_PAUSE_REP_COUNT to avoid spin too long waiting
- * for other thread finish. It gives pre-empted thread a chance
- * to proceed and finish with ring dequeue operation. */
- if (RTE_RING_PAUSE_REP_COUNT &&
- ++rep == RTE_RING_PAUSE_REP_COUNT) {
- rep = 0;
- sched_yield();
- }
- }
- __RING_STAT_ADD(r, deq_success, n);
- r->cons.tail = cons_next;
-
- return behavior == RTE_RING_QUEUE_FIXED ? 0 : n;
+ update_tail(&r->prod, prod_head, prod_next, is_sp, 1);
+end:
+ if (free_space != NULL)
+ *free_space = free_entries - n;
+ return n;
}
/**
- * @internal Dequeue several objects from a ring (NOT multi-consumers safe).
- * When the request objects are more than the available objects, only dequeue
- * the actual number of objects
+ * @internal Dequeue several objects from the ring
*
* @param r
* A pointer to the ring structure.
* @param obj_table
- * A pointer to a table of void * pointers (objects) that will be filled.
+ * A pointer to a table of void * pointers (objects).
* @param n
- * The number of objects to dequeue from the ring to the obj_table.
+ * The number of objects to pull from the ring.
* @param behavior
* RTE_RING_QUEUE_FIXED: Dequeue a fixed number of items from a ring
- * RTE_RING_QUEUE_VARIABLE: Dequeue as many items a possible from ring
+ * RTE_RING_QUEUE_VARIABLE: Dequeue as many items as possible from ring
+ * @param is_sc
+ * Indicates whether to use single consumer or multi-consumer head update
+ * @param available
+ * returns the number of remaining ring entries after the dequeue has finished
* @return
- * Depend on the behavior value
- * if behavior = RTE_RING_QUEUE_FIXED
- * - 0: Success; objects dequeued.
- * - -ENOENT: Not enough entries in the ring to dequeue; no object is
- * dequeued.
- * if behavior = RTE_RING_QUEUE_VARIABLE
- * - n: Actual number of objects dequeued.
+ * - Actual number of objects dequeued.
+ * If behavior == RTE_RING_QUEUE_FIXED, this will be 0 or n only.
*/
-static inline int __attribute__((always_inline))
-__rte_ring_sc_do_dequeue(struct rte_ring *r, void **obj_table,
- unsigned n, enum rte_ring_queue_behavior behavior)
+static __rte_always_inline unsigned int
+__rte_ring_do_dequeue(struct rte_ring *r, void **obj_table,
+ unsigned int n, enum rte_ring_queue_behavior behavior,
+ unsigned int is_sc, unsigned int *available)
{
- uint32_t cons_head, prod_tail;
- uint32_t cons_next, entries;
- unsigned i;
- uint32_t mask = r->prod.mask;
+ uint32_t cons_head, cons_next;
+ uint32_t entries;
- cons_head = r->cons.head;
- prod_tail = r->prod.tail;
- /* The subtraction is done between two unsigned 32bits value
- * (the result is always modulo 32 bits even if we have
- * cons_head > prod_tail). So 'entries' is always between 0
- * and size(ring)-1. */
- entries = prod_tail - cons_head;
+ n = __rte_ring_move_cons_head(r, (int)is_sc, n, behavior,
+ &cons_head, &cons_next, &entries);
+ if (n == 0)
+ goto end;
- if (n > entries) {
- if (behavior == RTE_RING_QUEUE_FIXED) {
- __RING_STAT_ADD(r, deq_fail, n);
- return -ENOENT;
- }
- else {
- if (unlikely(entries == 0)){
- __RING_STAT_ADD(r, deq_fail, n);
- return 0;
- }
+ DEQUEUE_PTRS(r, &r[1], cons_head, obj_table, n, void *);
- n = entries;
- }
- }
-
- cons_next = cons_head + n;
- r->cons.head = cons_next;
+ update_tail(&r->cons, cons_head, cons_next, is_sc, 0);
- /* copy in table */
- DEQUEUE_PTRS();
- rte_compiler_barrier();
-
- __RING_STAT_ADD(r, deq_success, n);
- r->cons.tail = cons_next;
- return behavior == RTE_RING_QUEUE_FIXED ? 0 : n;
+end:
+ if (available != NULL)
+ *available = entries - n;
+ return n;
}
/**
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
- * - 0: Success; objects enqueue.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
- * - -ENOBUFS: Not enough room in the ring to enqueue, no object is enqueued.
+ * The number of objects enqueued, either 0 or n
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline unsigned int
rte_ring_mp_enqueue_bulk(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- return __rte_ring_mp_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_FIXED);
+ return __rte_ring_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_FIXED,
+ RTE_RING_SYNC_MT, free_space);
}
/**
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
- * - 0: Success; objects enqueued.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
- * - -ENOBUFS: Not enough room in the ring to enqueue; no object is enqueued.
+ * The number of objects enqueued, either 0 or n
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline unsigned int
rte_ring_sp_enqueue_bulk(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- return __rte_ring_sp_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_FIXED);
+ return __rte_ring_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_FIXED,
+ RTE_RING_SYNC_ST, free_space);
}
+#ifdef ALLOW_EXPERIMENTAL_API
+#include <rte_ring_elem.h>
+#endif
+
/**
* Enqueue several objects on a ring.
*
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
- * - 0: Success; objects enqueued.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
- * - -ENOBUFS: Not enough room in the ring to enqueue; no object is enqueued.
+ * The number of objects enqueued, either 0 or n
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline unsigned int
rte_ring_enqueue_bulk(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- if (r->prod.sp_enqueue)
- return rte_ring_sp_enqueue_bulk(r, obj_table, n);
- else
- return rte_ring_mp_enqueue_bulk(r, obj_table, n);
+ switch (r->prod.sync_type) {
+ case RTE_RING_SYNC_MT:
+ return rte_ring_mp_enqueue_bulk(r, obj_table, n, free_space);
+ case RTE_RING_SYNC_ST:
+ return rte_ring_sp_enqueue_bulk(r, obj_table, n, free_space);
+#ifdef ALLOW_EXPERIMENTAL_API
+ case RTE_RING_SYNC_MT_RTS:
+ return rte_ring_mp_rts_enqueue_bulk(r, obj_table, n,
+ free_space);
+ case RTE_RING_SYNC_MT_HTS:
+ return rte_ring_mp_hts_enqueue_bulk(r, obj_table, n,
+ free_space);
+#endif
+ }
+
+ /* valid ring should never reach this point */
+ RTE_ASSERT(0);
+ return 0;
}
/**
* A pointer to the object to be added.
* @return
* - 0: Success; objects enqueued.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
* - -ENOBUFS: Not enough room in the ring to enqueue; no object is enqueued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_mp_enqueue(struct rte_ring *r, void *obj)
{
- return rte_ring_mp_enqueue_bulk(r, &obj, 1);
+ return rte_ring_mp_enqueue_bulk(r, &obj, 1, NULL) ? 0 : -ENOBUFS;
}
/**
* A pointer to the object to be added.
* @return
* - 0: Success; objects enqueued.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
* - -ENOBUFS: Not enough room in the ring to enqueue; no object is enqueued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_sp_enqueue(struct rte_ring *r, void *obj)
{
- return rte_ring_sp_enqueue_bulk(r, &obj, 1);
+ return rte_ring_sp_enqueue_bulk(r, &obj, 1, NULL) ? 0 : -ENOBUFS;
}
/**
* A pointer to the object to be added.
* @return
* - 0: Success; objects enqueued.
- * - -EDQUOT: Quota exceeded. The objects have been enqueued, but the
- * high water mark is exceeded.
* - -ENOBUFS: Not enough room in the ring to enqueue; no object is enqueued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_enqueue(struct rte_ring *r, void *obj)
{
- if (r->prod.sp_enqueue)
- return rte_ring_sp_enqueue(r, obj);
- else
- return rte_ring_mp_enqueue(r, obj);
+ return rte_ring_enqueue_bulk(r, &obj, 1, NULL) ? 0 : -ENOBUFS;
}
/**
* A pointer to a table of void * pointers (objects) that will be filled.
* @param n
* The number of objects to dequeue from the ring to the obj_table.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
- * - 0: Success; objects dequeued.
- * - -ENOENT: Not enough entries in the ring to dequeue; no object is
- * dequeued.
+ * The number of objects dequeued, either 0 or n
*/
-static inline int __attribute__((always_inline))
-rte_ring_mc_dequeue_bulk(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned int
+rte_ring_mc_dequeue_bulk(struct rte_ring *r, void **obj_table,
+ unsigned int n, unsigned int *available)
{
- return __rte_ring_mc_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_FIXED);
+ return __rte_ring_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_FIXED,
+ RTE_RING_SYNC_MT, available);
}
/**
* @param n
* The number of objects to dequeue from the ring to the obj_table,
* must be strictly positive.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
- * - 0: Success; objects dequeued.
- * - -ENOENT: Not enough entries in the ring to dequeue; no object is
- * dequeued.
+ * The number of objects dequeued, either 0 or n
*/
-static inline int __attribute__((always_inline))
-rte_ring_sc_dequeue_bulk(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned int
+rte_ring_sc_dequeue_bulk(struct rte_ring *r, void **obj_table,
+ unsigned int n, unsigned int *available)
{
- return __rte_ring_sc_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_FIXED);
+ return __rte_ring_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_FIXED,
+ RTE_RING_SYNC_ST, available);
}
/**
* A pointer to a table of void * pointers (objects) that will be filled.
* @param n
* The number of objects to dequeue from the ring to the obj_table.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
- * - 0: Success; objects dequeued.
- * - -ENOENT: Not enough entries in the ring to dequeue, no object is
- * dequeued.
+ * The number of objects dequeued, either 0 or n
*/
-static inline int __attribute__((always_inline))
-rte_ring_dequeue_bulk(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned int
+rte_ring_dequeue_bulk(struct rte_ring *r, void **obj_table, unsigned int n,
+ unsigned int *available)
{
- if (r->cons.sc_dequeue)
- return rte_ring_sc_dequeue_bulk(r, obj_table, n);
- else
- return rte_ring_mc_dequeue_bulk(r, obj_table, n);
+ switch (r->cons.sync_type) {
+ case RTE_RING_SYNC_MT:
+ return rte_ring_mc_dequeue_bulk(r, obj_table, n, available);
+ case RTE_RING_SYNC_ST:
+ return rte_ring_sc_dequeue_bulk(r, obj_table, n, available);
+#ifdef ALLOW_EXPERIMENTAL_API
+ case RTE_RING_SYNC_MT_RTS:
+ return rte_ring_mc_rts_dequeue_bulk(r, obj_table, n, available);
+ case RTE_RING_SYNC_MT_HTS:
+ return rte_ring_mc_hts_dequeue_bulk(r, obj_table, n, available);
+#endif
+ }
+
+ /* valid ring should never reach this point */
+ RTE_ASSERT(0);
+ return 0;
}
/**
* - -ENOENT: Not enough entries in the ring to dequeue; no object is
* dequeued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_mc_dequeue(struct rte_ring *r, void **obj_p)
{
- return rte_ring_mc_dequeue_bulk(r, obj_p, 1);
+ return rte_ring_mc_dequeue_bulk(r, obj_p, 1, NULL) ? 0 : -ENOENT;
}
/**
* - -ENOENT: Not enough entries in the ring to dequeue, no object is
* dequeued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_sc_dequeue(struct rte_ring *r, void **obj_p)
{
- return rte_ring_sc_dequeue_bulk(r, obj_p, 1);
+ return rte_ring_sc_dequeue_bulk(r, obj_p, 1, NULL) ? 0 : -ENOENT;
}
/**
* - -ENOENT: Not enough entries in the ring to dequeue, no object is
* dequeued.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_ring_dequeue(struct rte_ring *r, void **obj_p)
{
- if (r->cons.sc_dequeue)
- return rte_ring_sc_dequeue(r, obj_p);
- else
- return rte_ring_mc_dequeue(r, obj_p);
+ return rte_ring_dequeue_bulk(r, obj_p, 1, NULL) ? 0 : -ENOENT;
+}
+
+/**
+ * Flush a ring.
+ *
+ * This function flush all the elements in a ring
+ *
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * @warning
+ * Make sure the ring is not in use while calling this function.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ */
+__rte_experimental
+void
+rte_ring_reset(struct rte_ring *r);
+
+/**
+ * Return the number of entries in a ring.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * The number of entries in the ring.
+ */
+static inline unsigned
+rte_ring_count(const struct rte_ring *r)
+{
+ uint32_t prod_tail = r->prod.tail;
+ uint32_t cons_tail = r->cons.tail;
+ uint32_t count = (prod_tail - cons_tail) & r->mask;
+ return (count > r->capacity) ? r->capacity : count;
+}
+
+/**
+ * Return the number of free entries in a ring.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * The number of free entries in the ring.
+ */
+static inline unsigned
+rte_ring_free_count(const struct rte_ring *r)
+{
+ return r->capacity - rte_ring_count(r);
}
/**
static inline int
rte_ring_full(const struct rte_ring *r)
{
- uint32_t prod_tail = r->prod.tail;
- uint32_t cons_tail = r->cons.tail;
- return (((cons_tail - prod_tail - 1) & r->prod.mask) == 0);
+ return rte_ring_free_count(r) == 0;
}
/**
static inline int
rte_ring_empty(const struct rte_ring *r)
{
- uint32_t prod_tail = r->prod.tail;
- uint32_t cons_tail = r->cons.tail;
- return !!(cons_tail == prod_tail);
+ return rte_ring_count(r) == 0;
}
/**
- * Return the number of entries in a ring.
+ * Return the size of the ring.
*
* @param r
* A pointer to the ring structure.
* @return
- * The number of entries in the ring.
+ * The size of the data store used by the ring.
+ * NOTE: this is not the same as the usable space in the ring. To query that
+ * use ``rte_ring_get_capacity()``.
*/
-static inline unsigned
-rte_ring_count(const struct rte_ring *r)
+static inline unsigned int
+rte_ring_get_size(const struct rte_ring *r)
{
- uint32_t prod_tail = r->prod.tail;
- uint32_t cons_tail = r->cons.tail;
- return ((prod_tail - cons_tail) & r->prod.mask);
+ return r->size;
}
/**
- * Return the number of free entries in a ring.
+ * Return the number of elements which can be stored in the ring.
*
* @param r
* A pointer to the ring structure.
* @return
- * The number of free entries in the ring.
+ * The usable size of the ring.
*/
-static inline unsigned
-rte_ring_free_count(const struct rte_ring *r)
+static inline unsigned int
+rte_ring_get_capacity(const struct rte_ring *r)
{
- uint32_t prod_tail = r->prod.tail;
- uint32_t cons_tail = r->cons.tail;
- return ((cons_tail - prod_tail - 1) & r->prod.mask);
+ return r->capacity;
+}
+
+/**
+ * Return sync type used by producer in the ring.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * Producer sync type value.
+ */
+static inline enum rte_ring_sync_type
+rte_ring_get_prod_sync_type(const struct rte_ring *r)
+{
+ return r->prod.sync_type;
+}
+
+/**
+ * Check is the ring for single producer.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * true if ring is SP, zero otherwise.
+ */
+static inline int
+rte_ring_is_prod_single(const struct rte_ring *r)
+{
+ return (rte_ring_get_prod_sync_type(r) == RTE_RING_SYNC_ST);
+}
+
+/**
+ * Return sync type used by consumer in the ring.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * Consumer sync type value.
+ */
+static inline enum rte_ring_sync_type
+rte_ring_get_cons_sync_type(const struct rte_ring *r)
+{
+ return r->cons.sync_type;
+}
+
+/**
+ * Check is the ring for single consumer.
+ *
+ * @param r
+ * A pointer to the ring structure.
+ * @return
+ * true if ring is SC, zero otherwise.
+ */
+static inline int
+rte_ring_is_cons_single(const struct rte_ring *r)
+{
+ return (rte_ring_get_cons_sync_type(r) == RTE_RING_SYNC_ST);
}
/**
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
* - n: Actual number of objects enqueued.
*/
-static inline unsigned __attribute__((always_inline))
+static __rte_always_inline unsigned
rte_ring_mp_enqueue_burst(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- return __rte_ring_mp_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_VARIABLE);
+ return __rte_ring_do_enqueue(r, obj_table, n,
+ RTE_RING_QUEUE_VARIABLE, RTE_RING_SYNC_MT, free_space);
}
/**
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
* - n: Actual number of objects enqueued.
*/
-static inline unsigned __attribute__((always_inline))
+static __rte_always_inline unsigned
rte_ring_sp_enqueue_burst(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- return __rte_ring_sp_do_enqueue(r, obj_table, n, RTE_RING_QUEUE_VARIABLE);
+ return __rte_ring_do_enqueue(r, obj_table, n,
+ RTE_RING_QUEUE_VARIABLE, RTE_RING_SYNC_ST, free_space);
}
/**
* A pointer to a table of void * pointers (objects).
* @param n
* The number of objects to add in the ring from the obj_table.
+ * @param free_space
+ * if non-NULL, returns the amount of space in the ring after the
+ * enqueue operation has finished.
* @return
* - n: Actual number of objects enqueued.
*/
-static inline unsigned __attribute__((always_inline))
+static __rte_always_inline unsigned
rte_ring_enqueue_burst(struct rte_ring *r, void * const *obj_table,
- unsigned n)
+ unsigned int n, unsigned int *free_space)
{
- if (r->prod.sp_enqueue)
- return rte_ring_sp_enqueue_burst(r, obj_table, n);
- else
- return rte_ring_mp_enqueue_burst(r, obj_table, n);
+ switch (r->prod.sync_type) {
+ case RTE_RING_SYNC_MT:
+ return rte_ring_mp_enqueue_burst(r, obj_table, n, free_space);
+ case RTE_RING_SYNC_ST:
+ return rte_ring_sp_enqueue_burst(r, obj_table, n, free_space);
+#ifdef ALLOW_EXPERIMENTAL_API
+ case RTE_RING_SYNC_MT_RTS:
+ return rte_ring_mp_rts_enqueue_burst(r, obj_table, n,
+ free_space);
+ case RTE_RING_SYNC_MT_HTS:
+ return rte_ring_mp_hts_enqueue_burst(r, obj_table, n,
+ free_space);
+#endif
+ }
+
+ /* valid ring should never reach this point */
+ RTE_ASSERT(0);
+ return 0;
}
/**
* A pointer to a table of void * pointers (objects) that will be filled.
* @param n
* The number of objects to dequeue from the ring to the obj_table.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
* - n: Actual number of objects dequeued, 0 if ring is empty
*/
-static inline unsigned __attribute__((always_inline))
-rte_ring_mc_dequeue_burst(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned
+rte_ring_mc_dequeue_burst(struct rte_ring *r, void **obj_table,
+ unsigned int n, unsigned int *available)
{
- return __rte_ring_mc_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_VARIABLE);
+ return __rte_ring_do_dequeue(r, obj_table, n,
+ RTE_RING_QUEUE_VARIABLE, RTE_RING_SYNC_MT, available);
}
/**
* A pointer to a table of void * pointers (objects) that will be filled.
* @param n
* The number of objects to dequeue from the ring to the obj_table.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
* - n: Actual number of objects dequeued, 0 if ring is empty
*/
-static inline unsigned __attribute__((always_inline))
-rte_ring_sc_dequeue_burst(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned
+rte_ring_sc_dequeue_burst(struct rte_ring *r, void **obj_table,
+ unsigned int n, unsigned int *available)
{
- return __rte_ring_sc_do_dequeue(r, obj_table, n, RTE_RING_QUEUE_VARIABLE);
+ return __rte_ring_do_dequeue(r, obj_table, n,
+ RTE_RING_QUEUE_VARIABLE, RTE_RING_SYNC_ST, available);
}
/**
* A pointer to a table of void * pointers (objects) that will be filled.
* @param n
* The number of objects to dequeue from the ring to the obj_table.
+ * @param available
+ * If non-NULL, returns the number of remaining ring entries after the
+ * dequeue has finished.
* @return
* - Number of objects dequeued
*/
-static inline unsigned __attribute__((always_inline))
-rte_ring_dequeue_burst(struct rte_ring *r, void **obj_table, unsigned n)
+static __rte_always_inline unsigned
+rte_ring_dequeue_burst(struct rte_ring *r, void **obj_table,
+ unsigned int n, unsigned int *available)
{
- if (r->cons.sc_dequeue)
- return rte_ring_sc_dequeue_burst(r, obj_table, n);
- else
- return rte_ring_mc_dequeue_burst(r, obj_table, n);
+ switch (r->cons.sync_type) {
+ case RTE_RING_SYNC_MT:
+ return rte_ring_mc_dequeue_burst(r, obj_table, n, available);
+ case RTE_RING_SYNC_ST:
+ return rte_ring_sc_dequeue_burst(r, obj_table, n, available);
+#ifdef ALLOW_EXPERIMENTAL_API
+ case RTE_RING_SYNC_MT_RTS:
+ return rte_ring_mc_rts_dequeue_burst(r, obj_table, n,
+ available);
+ case RTE_RING_SYNC_MT_HTS:
+ return rte_ring_mc_hts_dequeue_burst(r, obj_table, n,
+ available);
+#endif
+ }
+
+ /* valid ring should never reach this point */
+ RTE_ASSERT(0);
+ return 0;
}
#ifdef __cplusplus