-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#ifndef __INCLUDE_RTE_SCHED_H__
* @file
* RTE Hierarchical Scheduler
*
- * The hierarchical scheduler prioritizes the transmission of packets from different
- * users and traffic classes according to the Service Level Agreements (SLAs) defined
- * for the current network node.
+ * The hierarchical scheduler prioritizes the transmission of packets
+ * from different users and traffic classes according to the Service
+ * Level Agreements (SLAs) defined for the current network node.
*
- * The scheduler supports thousands of packet queues grouped under a 5-level hierarchy:
- * 1. Port:
+ * The scheduler supports thousands of packet queues grouped under a
+ * 5-level hierarchy:
+ * 1. Port:
* - Typical usage: output Ethernet port;
- * - Multiple ports are scheduled in round robin order with equal priority;
+ * - Multiple ports are scheduled in round robin order with
+ * equal priority;
* 2. Subport:
* - Typical usage: group of users;
- * - Traffic shaping using the token bucket algorithm (one bucket per subport);
+ * - Traffic shaping using the token bucket algorithm
+ * (one bucket per subport);
* - Upper limit enforced per traffic class at subport level;
- * - Lower priority traffic classes able to reuse subport bandwidth currently
- * unused by higher priority traffic classes of the same subport;
- * - When any subport traffic class is oversubscribed (configuration time
- * event), the usage of subport member pipes with high demand for that
- * traffic class pipes is truncated to a dynamically adjusted value with no
+ * - Lower priority traffic classes able to reuse subport
+ * bandwidth currently unused by higher priority traffic
+ * classes of the same subport;
+ * - When any subport traffic class is oversubscribed
+ * (configuration time event), the usage of subport member
+ * pipes with high demand for that traffic class pipes is
+ * truncated to a dynamically adjusted value with no
* impact to low demand pipes;
- * 3. Pipe:
+ * 3. Pipe:
* - Typical usage: individual user/subscriber;
- * - Traffic shaping using the token bucket algorithm (one bucket per pipe);
+ * - Traffic shaping using the token bucket algorithm
+ * (one bucket per pipe);
* 4. Traffic class:
- * - Traffic classes of the same pipe handled in strict priority order;
+ * - Traffic classes of the same pipe handled in strict
+ * priority order;
* - Upper limit enforced per traffic class at the pipe level;
- * - Lower priority traffic classes able to reuse pipe bandwidth currently
- * unused by higher priority traffic classes of the same pipe;
+ * - Lower priority traffic classes able to reuse pipe
+ * bandwidth currently unused by higher priority traffic
+ * classes of the same pipe;
* 5. Queue:
- * - Typical usage: queue hosting packets from one or multiple connections
- * of same traffic class belonging to the same user;
- * - Weighted Round Robin (WRR) is used to service the queues within same
- * pipe traffic class.
+ * - Typical usage: queue hosting packets from one or
+ * multiple connections of same traffic class belonging to
+ * the same user;
+ * - Weighted Round Robin (WRR) is used to service the
+ * queues within same pipe lowest priority traffic class (best-effort).
*
- ***/
+ */
#include <sys/types.h>
+#include <rte_compat.h>
#include <rte_mbuf.h>
#include <rte_meter.h>
#include "rte_red.h"
#endif
-/** Number of traffic classes per pipe (as well as subport). Cannot be changed. */
-#define RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE 4
+/** Maximum number of queues per pipe.
+ * Note that the multiple queues (power of 2) can only be assigned to
+ * lowest priority (best-effort) traffic class. Other higher priority traffic
+ * classes can only have one queue.
+ * Can not change.
+ *
+ * @see struct rte_sched_port_params
+ */
+#define RTE_SCHED_QUEUES_PER_PIPE 16
-/** Number of queues per pipe traffic class. Cannot be changed. */
-#define RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS 4
+/** Number of WRR queues for best-effort traffic class per pipe.
+ *
+ * @see struct rte_sched_pipe_params
+ */
+#define RTE_SCHED_BE_QUEUES_PER_PIPE 4
-/** Number of queues per pipe. */
-#define RTE_SCHED_QUEUES_PER_PIPE \
- (RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE * \
- RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS)
+/** Number of traffic classes per pipe (as well as subport).
+ * @see struct rte_sched_subport_params
+ * @see struct rte_sched_pipe_params
+ */
+#define RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE \
+(RTE_SCHED_QUEUES_PER_PIPE - RTE_SCHED_BE_QUEUES_PER_PIPE + 1)
-/** Maximum number of pipe profiles that can be defined per port. Compile-time configurable.*/
-#ifndef RTE_SCHED_PIPE_PROFILES_PER_PORT
-#define RTE_SCHED_PIPE_PROFILES_PER_PORT 256
-#endif
+/** Best-effort traffic class ID
+ * Can not change.
+ */
+#define RTE_SCHED_TRAFFIC_CLASS_BE (RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE - 1)
-/** Ethernet framing overhead. Overhead fields per Ethernet frame:
- 1. Preamble: 7 bytes;
- 2. Start of Frame Delimiter (SFD): 1 byte;
- 3. Frame Check Sequence (FCS): 4 bytes;
- 4. Inter Frame Gap (IFG): 12 bytes.
-The FCS is considered overhead only if not included in the packet length (field pkt.pkt_len
-of struct rte_mbuf). */
+/*
+ * Ethernet framing overhead. Overhead fields per Ethernet frame:
+ * 1. Preamble: 7 bytes;
+ * 2. Start of Frame Delimiter (SFD): 1 byte;
+ * 3. Frame Check Sequence (FCS): 4 bytes;
+ * 4. Inter Frame Gap (IFG): 12 bytes.
+ *
+ * The FCS is considered overhead only if not included in the packet
+ * length (field pkt_len of struct rte_mbuf).
+ *
+ * @see struct rte_sched_port_params
+ */
#ifndef RTE_SCHED_FRAME_OVERHEAD_DEFAULT
#define RTE_SCHED_FRAME_OVERHEAD_DEFAULT 24
#endif
-/** Subport configuration parameters. The period and credits_per_period parameters are measured
-in bytes, with one byte meaning the time duration associated with the transmission of one byte
-on the physical medium of the output port, with pipe or pipe traffic class rate (measured as
-percentage of output port rate) determined as credits_per_period divided by period. One credit
-represents one byte. */
+/*
+ * Pipe configuration parameters. The period and credits_per_period
+ * parameters are measured in bytes, with one byte meaning the time
+ * duration associated with the transmission of one byte on the
+ * physical medium of the output port, with pipe or pipe traffic class
+ * rate (measured as percentage of output port rate) determined as
+ * credits_per_period divided by period. One credit represents one
+ * byte.
+ */
+struct rte_sched_pipe_params {
+ /** Token bucket rate (measured in bytes per second) */
+ uint64_t tb_rate;
+
+ /** Token bucket size (measured in credits) */
+ uint64_t tb_size;
+
+ /** Traffic class rates (measured in bytes per second) */
+ uint64_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+ /** Enforcement period (measured in milliseconds) */
+ uint64_t tc_period;
+
+ /** Best-effort traffic class oversubscription weight */
+ uint8_t tc_ov_weight;
+
+ /** WRR weights of best-effort traffic class queues */
+ uint8_t wrr_weights[RTE_SCHED_BE_QUEUES_PER_PIPE];
+};
+
+/*
+ * Subport configuration parameters. The period and credits_per_period
+ * parameters are measured in bytes, with one byte meaning the time
+ * duration associated with the transmission of one byte on the
+ * physical medium of the output port, with pipe or pipe traffic class
+ * rate (measured as percentage of output port rate) determined as
+ * credits_per_period divided by period. One credit represents one
+ * byte.
+ */
struct rte_sched_subport_params {
- /* Subport token bucket */
- uint32_t tb_rate; /**< Subport token bucket rate (measured in bytes per second) */
- uint32_t tb_size; /**< Subport token bucket size (measured in credits) */
-
- /* Subport traffic classes */
- uint32_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Subport traffic class rates (measured in bytes per second) */
- uint32_t tc_period; /**< Enforcement period for traffic class rates (measured in milliseconds) */
+ /** Token bucket rate (measured in bytes per second) */
+ uint64_t tb_rate;
+
+ /** Token bucket size (measured in credits) */
+ uint64_t tb_size;
+
+ /** Traffic class rates (measured in bytes per second) */
+ uint64_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+ /** Enforcement period for rates (measured in milliseconds) */
+ uint64_t tc_period;
+
+ /** Number of subport pipes.
+ * The subport can enable/allocate fewer pipes than the maximum
+ * number set through struct port_params::n_max_pipes_per_subport,
+ * as needed, to avoid memory allocation for the queues of the
+ * pipes that are not really needed.
+ */
+ uint32_t n_pipes_per_subport_enabled;
+
+ /** Packet queue size for each traffic class.
+ * All the pipes within the same subport share the similar
+ * configuration for the queues.
+ */
+ uint16_t qsize[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+ /** Pipe profile table.
+ * Every pipe is configured using one of the profiles from this table.
+ */
+ struct rte_sched_pipe_params *pipe_profiles;
+
+ /** Profiles in the pipe profile table */
+ uint32_t n_pipe_profiles;
+
+ /** Max allowed profiles in the pipe profile table */
+ uint32_t n_max_pipe_profiles;
+
+#ifdef RTE_SCHED_RED
+ /** RED parameters */
+ struct rte_red_params red_params[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE][RTE_COLORS];
+#endif
};
/** Subport statistics */
struct rte_sched_subport_stats {
- /* Packets */
- uint32_t n_pkts_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of packets successfully written to current
- subport for each traffic class */
- uint32_t n_pkts_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of packets dropped by the current
- subport for each traffic class due to subport queues being full or congested*/
-
- /* Bytes */
- uint32_t n_bytes_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of bytes successfully written to current
- subport for each traffic class*/
- uint32_t n_bytes_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of bytes dropped by the current
- subport for each traffic class due to subport queues being full or congested */
-};
+ /** Number of packets successfully written */
+ uint64_t n_pkts_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
-/** Pipe configuration parameters. The period and credits_per_period parameters are measured
-in bytes, with one byte meaning the time duration associated with the transmission of one byte
-on the physical medium of the output port, with pipe or pipe traffic class rate (measured as
-percentage of output port rate) determined as credits_per_period divided by period. One credit
-represents one byte. */
-struct rte_sched_pipe_params {
- /* Pipe token bucket */
- uint32_t tb_rate; /**< Pipe token bucket rate (measured in bytes per second) */
- uint32_t tb_size; /**< Pipe token bucket size (measured in credits) */
-
- /* Pipe traffic classes */
- uint32_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Pipe traffic class rates (measured in bytes per second) */
- uint32_t tc_period; /**< Enforcement period for pipe traffic class rates (measured in milliseconds) */
-#ifdef RTE_SCHED_SUBPORT_TC_OV
- uint8_t tc_ov_weight; /**< Weight for the current pipe in the event of subport traffic class 3 oversubscription */
+ /** Number of packets dropped */
+ uint64_t n_pkts_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+ /** Number of bytes successfully written for each traffic class */
+ uint64_t n_bytes_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+ /** Number of bytes dropped for each traffic class */
+ uint64_t n_bytes_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
+
+#ifdef RTE_SCHED_RED
+ /** Number of packets dropped by red */
+ uint64_t n_pkts_red_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE];
#endif
-
- /* Pipe queues */
- uint8_t wrr_weights[RTE_SCHED_QUEUES_PER_PIPE]; /**< WRR weights for the queues of the current pipe */
};
/** Queue statistics */
struct rte_sched_queue_stats {
- /* Packets */
- uint32_t n_pkts; /**< Number of packets successfully written to current queue */
- uint32_t n_pkts_dropped; /**< Number of packets dropped due to current queue being full or congested */
-
- /* Bytes */
- uint32_t n_bytes; /**< Number of bytes successfully written to current queue */
- uint32_t n_bytes_dropped; /**< Number of bytes dropped due to current queue being full or congested */
-};
+ /** Packets successfully written */
+ uint64_t n_pkts;
+
+ /** Packets dropped */
+ uint64_t n_pkts_dropped;
-/** Port configuration parameters. */
-struct rte_sched_port_params {
- const char *name; /**< Literal string to be associated to the current port scheduler instance */
- int socket; /**< CPU socket ID where the memory for port scheduler should be allocated */
- uint32_t rate; /**< Output port rate (measured in bytes per second) */
- uint32_t mtu; /**< Maximum Ethernet frame size (measured in bytes). Should not include the framing overhead. */
- uint32_t frame_overhead; /**< Framing overhead per packet (measured in bytes) */
- uint32_t n_subports_per_port; /**< Number of subports for the current port scheduler instance*/
- uint32_t n_pipes_per_subport; /**< Number of pipes for each port scheduler subport */
- uint16_t qsize[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Packet queue size for each traffic class. All queues
- within the same pipe traffic class have the same size. Queues from
- different pipes serving the same traffic class have the same size. */
- struct rte_sched_pipe_params *pipe_profiles; /**< Pipe profile table defined for current port scheduler instance.
- Every pipe of the current port scheduler is configured using one of the
- profiles from this table. */
- uint32_t n_pipe_profiles; /**< Number of profiles in the pipe profile table */
#ifdef RTE_SCHED_RED
- struct rte_red_params red_params[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE][e_RTE_METER_COLORS]; /**< RED parameters */
+ /** Packets dropped by RED */
+ uint64_t n_pkts_red_dropped;
#endif
+
+ /** Bytes successfully written */
+ uint64_t n_bytes;
+
+ /** Bytes dropped */
+ uint64_t n_bytes_dropped;
};
-/** Path through the scheduler hierarchy used by the scheduler enqueue operation to
-identify the destination queue for the current packet. Stored in the field pkt.hash.sched
-of struct rte_mbuf of each packet, typically written by the classification stage and read by
-scheduler enqueue.*/
-struct rte_sched_port_hierarchy {
- uint32_t queue:2; /**< Queue ID (0 .. 3) */
- uint32_t traffic_class:2; /**< Traffic class ID (0 .. 3)*/
- uint32_t pipe:20; /**< Pipe ID */
- uint32_t subport:6; /**< Subport ID */
- uint32_t color:2; /**< Color */
+/** Port configuration parameters. */
+struct rte_sched_port_params {
+ /** Name of the port to be associated */
+ const char *name;
+
+ /** CPU socket ID */
+ int socket;
+
+ /** Output port rate (measured in bytes per second) */
+ uint64_t rate;
+
+ /** Maximum Ethernet frame size (measured in bytes).
+ * Should not include the framing overhead.
+ */
+ uint32_t mtu;
+
+ /** Framing overhead per packet (measured in bytes) */
+ uint32_t frame_overhead;
+
+ /** Number of subports */
+ uint32_t n_subports_per_port;
+
+ /** Maximum number of subport pipes.
+ * This parameter is used to reserve a fixed number of bits
+ * in struct rte_mbuf::sched.queue_id for the pipe_id for all
+ * the subports of the same port.
+ */
+ uint32_t n_pipes_per_subport;
};
/*
* @return
* Handle to port scheduler instance upon success or NULL otherwise.
*/
-struct rte_sched_port *
+struct rte_sched_port *
rte_sched_port_config(struct rte_sched_port_params *params);
/**
void
rte_sched_port_free(struct rte_sched_port *port);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Hierarchical scheduler pipe profile add
+ *
+ * @param port
+ * Handle to port scheduler instance
+ * @param subport_id
+ * Subport ID
+ * @param params
+ * Pipe profile parameters
+ * @param pipe_profile_id
+ * Set to valid profile id when profile is added successfully.
+ * @return
+ * 0 upon success, error code otherwise
+ */
+__rte_experimental
+int
+rte_sched_subport_pipe_profile_add(struct rte_sched_port *port,
+ uint32_t subport_id,
+ struct rte_sched_pipe_params *params,
+ uint32_t *pipe_profile_id);
+
/**
* Hierarchical scheduler subport configuration
*
* 0 upon success, error code otherwise
*/
int
-rte_sched_subport_config(struct rte_sched_port *port,
+rte_sched_subport_config(struct rte_sched_port *port,
uint32_t subport_id,
struct rte_sched_subport_params *params);
* @param pipe_id
* Pipe ID within subport
* @param pipe_profile
- * ID of port-level pre-configured pipe profile
+ * ID of subport-level pre-configured pipe profile
* @return
* 0 upon success, error code otherwise
*/
int
rte_sched_pipe_config(struct rte_sched_port *port,
- uint32_t subport_id,
+ uint32_t subport_id,
uint32_t pipe_id,
int32_t pipe_profile);
/**
* Hierarchical scheduler memory footprint size per port
*
- * @param params
+ * @param port_params
* Port scheduler configuration parameter structure
+ * @param subport_params
+ * Array of subport parameter structures
* @return
* Memory footprint size in bytes upon success, 0 otherwise
*/
uint32_t
-rte_sched_port_get_memory_footprint(struct rte_sched_port_params *params);
-
+rte_sched_port_get_memory_footprint(struct rte_sched_port_params *port_params,
+ struct rte_sched_subport_params **subport_params);
/*
- * Statistics
+ * Statistics
*
***/
* @param subport_id
* Subport ID
* @param stats
- * Pointer to pre-allocated subport statistics structure where the statistics
+ * Pointer to pre-allocated subport statistics structure where the statistics
* counters should be stored
* @param tc_ov
- * Pointer to pre-allocated 4-entry array where the oversubscription status for
- * each of the 4 subport traffic classes should be stored.
+ * Pointer to pre-allocated RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE-entry array
+ * where the oversubscription status for each of the subport traffic classes
+ * should be stored.
* @return
* 0 upon success, error code otherwise
*/
* @param queue_id
* Queue ID within port scheduler
* @param stats
- * Pointer to pre-allocated subport statistics structure where the statistics
+ * Pointer to pre-allocated subport statistics structure where the statistics
* counters should be stored
* @param qlen
- * Pointer to pre-allocated variable where the current queue length should be stored.
+ * Pointer to pre-allocated variable where the current queue length
+ * should be stored.
* @return
* 0 upon success, error code otherwise
*/
struct rte_sched_queue_stats *stats,
uint16_t *qlen);
-/*
- * Run-time
- *
- ***/
-
/**
- * Scheduler hierarchy path write to packet descriptor. Typically called by the
- * packet classification stage.
- *
+ * Scheduler hierarchy path write to packet descriptor. Typically
+ * called by the packet classification stage.
+ *
+ * @param port
+ * Handle to port scheduler instance
* @param pkt
* Packet descriptor handle
* @param subport
* @param pipe
* Pipe ID within subport
* @param traffic_class
- * Traffic class ID within pipe (0 .. 3)
+ * Traffic class ID within pipe (0 .. RTE_SCHED_TRAFFIC_CLASS_BE)
* @param queue
- * Queue ID within pipe traffic class (0 .. 3)
+ * Queue ID within pipe traffic class, 0 for high priority TCs, and
+ * 0 .. (RTE_SCHED_BE_QUEUES_PER_PIPE - 1) for best-effort TC
+ * @param color
+ * Packet color set
*/
-static inline void
-rte_sched_port_pkt_write(struct rte_mbuf *pkt,
- uint32_t subport, uint32_t pipe, uint32_t traffic_class, uint32_t queue, enum rte_meter_color color)
-{
- struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->pkt.hash.sched;
-
- sched->color = (uint32_t) color;
- sched->subport = subport;
- sched->pipe = pipe;
- sched->traffic_class = traffic_class;
- sched->queue = queue;
-}
+void
+rte_sched_port_pkt_write(struct rte_sched_port *port,
+ struct rte_mbuf *pkt,
+ uint32_t subport, uint32_t pipe, uint32_t traffic_class,
+ uint32_t queue, enum rte_color color);
/**
- * Scheduler hierarchy path read from packet descriptor (struct rte_mbuf). Typically
- * called as part of the hierarchical scheduler enqueue operation. The subport,
- * pipe, traffic class and queue parameters need to be pre-allocated by the caller.
+ * Scheduler hierarchy path read from packet descriptor (struct
+ * rte_mbuf). Typically called as part of the hierarchical scheduler
+ * enqueue operation. The subport, pipe, traffic class and queue
+ * parameters need to be pre-allocated by the caller.
*
+ * @param port
+ * Handle to port scheduler instance
* @param pkt
* Packet descriptor handle
* @param subport
* @param pipe
* Pipe ID within subport
* @param traffic_class
- * Traffic class ID within pipe (0 .. 3)
+ * Traffic class ID within pipe (0 .. RTE_SCHED_TRAFFIC_CLASS_BE)
* @param queue
- * Queue ID within pipe traffic class (0 .. 3)
- *
+ * Queue ID within pipe traffic class, 0 for high priority TCs, and
+ * 0 .. (RTE_SCHED_BE_QUEUES_PER_PIPE - 1) for best-effort TC
*/
-static inline void
-rte_sched_port_pkt_read_tree_path(struct rte_mbuf *pkt, uint32_t *subport, uint32_t *pipe, uint32_t *traffic_class, uint32_t *queue)
-{
- struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->pkt.hash.sched;
-
- *subport = sched->subport;
- *pipe = sched->pipe;
- *traffic_class = sched->traffic_class;
- *queue = sched->queue;
-}
-
-static inline enum rte_meter_color
-rte_sched_port_pkt_read_color(struct rte_mbuf *pkt)
-{
- struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->pkt.hash.sched;
+void
+rte_sched_port_pkt_read_tree_path(struct rte_sched_port *port,
+ const struct rte_mbuf *pkt,
+ uint32_t *subport, uint32_t *pipe,
+ uint32_t *traffic_class, uint32_t *queue);
- return (enum rte_meter_color) sched->color;
-}
+enum rte_color
+rte_sched_port_pkt_read_color(const struct rte_mbuf *pkt);
/**
- * Hierarchical scheduler port enqueue. Writes up to n_pkts to port scheduler and
- * returns the number of packets actually written. For each packet, the port scheduler
- * queue to write the packet to is identified by reading the hierarchy path from the
- * packet descriptor; if the queue is full or congested and the packet is not written
- * to the queue, then the packet is automatically dropped without any action required
- * from the caller.
+ * Hierarchical scheduler port enqueue. Writes up to n_pkts to port
+ * scheduler and returns the number of packets actually written. For
+ * each packet, the port scheduler queue to write the packet to is
+ * identified by reading the hierarchy path from the packet
+ * descriptor; if the queue is full or congested and the packet is not
+ * written to the queue, then the packet is automatically dropped
+ * without any action required from the caller.
*
* @param port
* Handle to port scheduler instance
rte_sched_port_enqueue(struct rte_sched_port *port, struct rte_mbuf **pkts, uint32_t n_pkts);
/**
- * Hierarchical scheduler port dequeue. Reads up to n_pkts from the port scheduler
- * and stores them in the pkts array and returns the number of packets actually read.
- * The pkts array needs to be pre-allocated by the caller with at least n_pkts entries.
+ * Hierarchical scheduler port dequeue. Reads up to n_pkts from the
+ * port scheduler and stores them in the pkts array and returns the
+ * number of packets actually read. The pkts array needs to be
+ * pre-allocated by the caller with at least n_pkts entries.
*
* @param port
* Handle to port scheduler instance
* @param pkts
- * Pre-allocated packet descriptor array where the packets dequeued from the port
+ * Pre-allocated packet descriptor array where the packets dequeued
+ * from the port
* scheduler should be stored
* @param n_pkts
* Number of packets to dequeue from the port scheduler