* Device specific vhost lib
*/
-#include <stdbool.h>
+/** Maximum name length for statistics counters */
+#define RTE_VDPA_STATS_NAME_SIZE 64
-#include <rte_pci.h>
-#include "rte_vhost.h"
+struct rte_vdpa_device;
-#define MAX_VDPA_NAME_LEN 128
-
-enum vdpa_addr_type {
- PCI_ADDR,
- VDPA_ADDR_MAX
+/**
+ * A vDPA device statistic structure
+ *
+ * This structure is used by rte_vdpa_stats_get() to provide
+ * statistics from the HW vDPA device.
+ *
+ * It maps a name id, corresponding to an index in the array returned
+ * by rte_vdpa_get_stats_names, to a statistic value.
+ */
+struct rte_vdpa_stat {
+ uint64_t id; /**< The index in stats name array */
+ uint64_t value; /**< The statistic counter value */
};
/**
- * vdpa device address
+ * A name element for statistics
+ *
+ * An array of this structure is returned by rte_vdpa_get_stats_names
+ * It lists the names of extended statistics for a PMD. The rte_vdpa_stat
+ * structure references these names by their array index
*/
-struct rte_vdpa_dev_addr {
- /** vdpa address type */
- enum vdpa_addr_type type;
-
- /** vdpa pci address */
- union {
- uint8_t __dummy[64];
- struct rte_pci_addr pci_addr;
- };
+struct rte_vdpa_stat_name {
+ char name[RTE_VDPA_STATS_NAME_SIZE]; /**< The statistic name */
};
/**
- * vdpa device operations
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Find the device id of a vdpa device from its name
+ *
+ * @param name
+ * the vdpa device name
+ * @return
+ * vDPA device pointer on success, NULL on failure
*/
-struct rte_vdpa_dev_ops {
- /** Get capabilities of this device */
- int (*get_queue_num)(int did, uint32_t *queue_num);
-
- /** Get supported features of this device */
- int (*get_features)(int did, uint64_t *features);
-
- /** Get supported protocol features of this device */
- int (*get_protocol_features)(int did, uint64_t *protocol_features);
-
- /** Driver configure/close the device */
- int (*dev_conf)(int vid);
- int (*dev_close)(int vid);
-
- /** Enable/disable this vring */
- int (*set_vring_state)(int vid, int vring, int state);
-
- /** Set features when changed */
- int (*set_features)(int vid);
-
- /** Destination operations when migration done */
- int (*migration_done)(int vid);
-
- /** Get the vfio group fd */
- int (*get_vfio_group_fd)(int vid);
-
- /** Get the vfio device fd */
- int (*get_vfio_device_fd)(int vid);
-
- /** Get the notify area info of the queue */
- int (*get_notify_area)(int vid, int qid,
- uint64_t *offset, uint64_t *size);
-
- /** Reserved for future extension */
- void *reserved[5];
-};
+__rte_experimental
+struct rte_vdpa_device *
+rte_vdpa_find_device_by_name(const char *name);
/**
- * vdpa device structure includes device address and device operations.
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get the generic device from the vdpa device
+ *
+ * @param vdpa_dev
+ * the vdpa device pointer
+ * @return
+ * generic device pointer on success, NULL on failure
*/
-struct rte_vdpa_device {
- /** vdpa device address */
- struct rte_vdpa_dev_addr addr;
- /** vdpa device operations */
- struct rte_vdpa_dev_ops *ops;
-} __rte_cache_aligned;
+__rte_experimental
+struct rte_device *
+rte_vdpa_get_rte_device(struct rte_vdpa_device *vdpa_dev);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Register a vdpa device
+ * Get number of queue pairs supported by the vDPA device
*
- * @param addr
- * the vdpa device address
- * @param ops
- * the vdpa device operations
+ * @param dev
+ * vDP device pointer
+ * @param queue_num
+ * pointer on where the number of queue is stored
* @return
- * device id on success, -1 on failure
+ * 0 on success, -1 on failure
*/
__rte_experimental
int
-rte_vdpa_register_device(struct rte_vdpa_dev_addr *addr,
- struct rte_vdpa_dev_ops *ops);
+rte_vdpa_get_queue_num(struct rte_vdpa_device *dev, uint32_t *queue_num);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Unregister a vdpa device
+ * Get the Virtio features supported by the vDPA device
*
- * @param did
- * vdpa device id
+ * @param dev
+ * vDP device pointer
+ * @param features
+ * pointer on where the supported features are stored
* @return
- * device id on success, -1 on failure
+ * 0 on success, -1 on failure
*/
__rte_experimental
int
-rte_vdpa_unregister_device(int did);
+rte_vdpa_get_features(struct rte_vdpa_device *dev, uint64_t *features);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Find the device id of a vdpa device
+ * Get the Vhost-user protocol features supported by the vDPA device
*
- * @param addr
- * the vdpa device address
+ * @param dev
+ * vDP device pointer
+ * @param features
+ * pointer on where the supported protocol features are stored
* @return
- * device id on success, -1 on failure
+ * 0 on success, -1 on failure
*/
__rte_experimental
int
-rte_vdpa_find_device_id(struct rte_vdpa_dev_addr *addr);
+rte_vdpa_get_protocol_features(struct rte_vdpa_device *dev, uint64_t *features);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Find a vdpa device based on device id
+ * Synchronize the used ring from mediated ring to guest, log dirty
+ * page for each writeable buffer, caller should handle the used
+ * ring logging before device stop.
*
- * @param did
- * device id
+ * @param vid
+ * vhost device id
+ * @param qid
+ * vhost queue id
+ * @param vring_m
+ * mediated virtio ring pointer
* @return
- * rte_vdpa_device on success, NULL on failure
+ * number of synced used entries on success, -1 on failure
*/
__rte_experimental
-struct rte_vdpa_device *
-rte_vdpa_get_device(int did);
+int
+rte_vdpa_relay_vring_used(int vid, uint16_t qid, void *vring_m);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Get current available vdpa device number
+ * Retrieve names of statistics of a vDPA device.
+ *
+ * There is an assumption that 'stat_names' and 'stats' arrays are matched
+ * by array index: stats_names[i].name => stats[i].value
*
+ * And the array index is same with id field of 'struct rte_vdpa_stat':
+ * stats[i].id == i
+ *
+ * @param dev
+ * vDPA device pointer
+ * @param stats_names
+ * array of at least size elements to be filled.
+ * If set to NULL, the function returns the required number of elements.
+ * @param size
+ * The number of elements in stats_names array.
* @return
- * available vdpa device number
+ * A negative value on error, otherwise the number of entries filled in the
+ * stats name array.
*/
__rte_experimental
int
-rte_vdpa_get_device_num(void);
+rte_vdpa_get_stats_names(struct rte_vdpa_device *dev,
+ struct rte_vdpa_stat_name *stats_names,
+ unsigned int size);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Enable/Disable host notifier mapping for a vdpa port.
+ * Retrieve statistics of a vDPA device.
*
- * @param vid
- * vhost device id
- * @param enable
- * true for host notifier map, false for host notifier unmap
+ * There is an assumption that 'stat_names' and 'stats' arrays are matched
+ * by array index: stats_names[i].name => stats[i].value
+ *
+ * And the array index is same with id field of 'struct rte_vdpa_stat':
+ * stats[i].id == i
+ *
+ * @param dev
+ * vDPA device pointer
+ * @param qid
+ * queue id
+ * @param stats
+ * A pointer to a table of structure of type rte_vdpa_stat to be filled with
+ * device statistics ids and values.
+ * @param n
+ * The number of elements in stats array.
* @return
- * 0 on success, -1 on failure
+ * A negative value on error, otherwise the number of entries filled in the
+ * stats table.
*/
__rte_experimental
int
-rte_vhost_host_notifier_ctrl(int vid, bool enable);
-
+rte_vdpa_get_stats(struct rte_vdpa_device *dev, uint16_t qid,
+ struct rte_vdpa_stat *stats, unsigned int n);
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
*
- * Synchronize the used ring from mediated ring to guest, log dirty
- * page for each writeable buffer, caller should handle the used
- * ring logging before device stop.
+ * Reset statistics of a vDPA device.
*
- * @param vid
- * vhost device id
+ * @param dev
+ * vDPA device pointer
* @param qid
- * vhost queue id
- * @param vring_m
- * mediated virtio ring pointer
+ * queue id
* @return
- * number of synced used entries on success, -1 on failure
+ * 0 on success, a negative value on error.
*/
__rte_experimental
int
-rte_vdpa_relay_vring_used(int vid, uint16_t qid, void *vring_m);
+rte_vdpa_reset_stats(struct rte_vdpa_device *dev, uint16_t qid);
#endif /* _RTE_VDPA_H_ */