# BSD LICENSE
-#
+#
# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright 2015 6WIND S.A.
# All rights reserved.
-#
+#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
-#
+#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
-#
+#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# Configuration, compilation and installation can be done at once
+# with make install T=<config>
+
+ifdef T # config, build and install combined
+# The build directory is T and may be prepended with O
+O ?= .
+RTE_OUTPUT := $O/$T
+else # standard install
# Build directory is given with O=
-ifdef O
-BUILD_DIR=$(O)
-else
-BUILD_DIR=.
+O ?= build
+RTE_OUTPUT := $O
endif
-# Targets to install can be specified in command line. It can be a
-# target name or a name containing jokers "*". Example:
-# x86_64-default-*-gcc
-ifndef T
-T=*
+ifneq ($(MAKECMDGOALS),pre_install)
+include $(RTE_SDK)/mk/rte.vars.mk
endif
-#
-# install: build sdk for all supported targets
-#
-INSTALL_CONFIGS := $(patsubst $(RTE_SRCDIR)/config/defconfig_%,%,\
- $(wildcard $(RTE_SRCDIR)/config/defconfig_$(T)))
-INSTALL_TARGETS := $(addsuffix _install,\
- $(filter-out %~,$(INSTALL_CONFIGS)))
+ifdef T # defaults with T= will install an almost flat staging tree
+export prefix ?=
+kerneldir ?= $(prefix)/kmod
+else
+ifeq ($(RTE_EXEC_ENV),linuxapp)
+kerneldir ?= /lib/modules/$(shell uname -r)/extra/dpdk
+else
+kerneldir ?= /boot/modules
+endif
+prefix ?= /usr/local
+endif
+exec_prefix ?= $(prefix)
+bindir ?= $(exec_prefix)/bin
+sbindir ?= $(exec_prefix)/sbin
+libdir ?= $(exec_prefix)/lib
+includedir ?= $(prefix)/include/dpdk
+datarootdir ?= $(prefix)/share
+docdir ?= $(datarootdir)/doc/dpdk
+datadir ?= $(datarootdir)/dpdk
+mandir ?= $(datarootdir)/man
+sdkdir ?= $(datadir)
+targetdir ?= $(datadir)/$(RTE_TARGET)
-.PHONY: install
-install: $(INSTALL_TARGETS)
+# The install directories may be staged in DESTDIR
+
+# Create the directory $1 if not exists
+rte_mkdir = test -d $1 || mkdir -p $1
-%_install:
- @echo ================== Installing $*
- $(Q)if [ ! -f $(BUILD_DIR)/$*/.config ]; then \
- $(MAKE) config T=$* O=$(BUILD_DIR)/$*; \
+# Create the relative symbolic link $2 -> $1
+# May be replaced with --relative option of ln from coreutils-8.16
+rte_symlink = ln -snf $$($(RTE_SDK)/buildtools/relpath.sh $1 $(dir $2)) $2
+
+.PHONY: pre_install
+pre_install:
+ifdef T
+ $(Q)if [ ! -f $(RTE_OUTPUT)/.config ]; then \
+ $(MAKE) config O=$(RTE_OUTPUT); \
+ elif cmp -s $(RTE_OUTPUT)/.config.orig $(RTE_OUTPUT)/.config; then \
+ $(MAKE) config O=$(RTE_OUTPUT); \
+ else \
+ if [ -f $(RTE_OUTPUT)/.config.orig ] ; then \
+ tmp_build=$(RTE_OUTPUT)/.config.tmp; \
+ $(MAKE) config O=$$tmp_build; \
+ if ! cmp -s $(RTE_OUTPUT)/.config.orig $$tmp_build/.config ; then \
+ echo "Conflict: local config and template config have both changed"; \
+ exit 1; \
+ fi; \
+ fi; \
+ echo "Using local configuration"; \
fi
- $(Q)$(MAKE) all O=$(BUILD_DIR)/$*
+ $(Q)$(MAKE) all O=$(RTE_OUTPUT)
+endif
-#
-# uninstall: remove all built sdk
-#
-UNINSTALL_TARGETS := $(addsuffix _uninstall,\
- $(filter-out %~,$(INSTALL_CONFIGS)))
+.PHONY: install
+install:
+ifeq ($(DESTDIR)$(if $T,,+),)
+ @echo Installation cannot run with T defined and DESTDIR undefined
+else
+ @echo ================== Installing $(DESTDIR)$(prefix)/
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-runtime
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-kmod
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-sdk
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-doc
+ @echo Installation in $(DESTDIR)$(prefix)/ complete
+endif
-.PHONY: uninstall
-uninstall: $(UNINSTALL_TARGETS)
+install-runtime:
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(libdir))
+ $(Q)cp -a $O/lib/* $(DESTDIR)$(libdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(bindir))
+ $(Q)tar -cf - -C $O --exclude 'app/*.map' \
+ --exclude app/dpdk-pmdinfogen \
+ --exclude 'app/cmdline*' --exclude app/test \
+ --exclude app/testacl --exclude app/testpipeline app | \
+ tar -xf - -C $(DESTDIR)$(bindir) --strip-components=1 \
+ --keep-newer-files
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
+ $(Q)cp -a $(RTE_SDK)/tools $(DESTDIR)$(datadir)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk-setup.sh, \
+ $(DESTDIR)$(datadir)/tools/setup.sh)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk-devbind.py, \
+ $(DESTDIR)$(datadir)/tools/dpdk_nic_bind.py)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(sbindir))
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk-devbind.py, \
+ $(DESTDIR)$(sbindir)/dpdk-devbind)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk-pmdinfo.py, \
+ $(DESTDIR)$(bindir)/dpdk-pmdinfo)
+ifneq ($(wildcard $O/doc/man/*/*.1),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(mandir)/man1)
+ $(Q)cp -a $O/doc/man/*/*.1 $(DESTDIR)$(mandir)/man1
+endif
+ifneq ($(wildcard $O/doc/man/*/*.8),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(mandir)/man8)
+ $(Q)cp -a $O/doc/man/*/*.8 $(DESTDIR)$(mandir)/man8
+endif
+
+install-kmod:
+ifneq ($(wildcard $O/kmod/*),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(kerneldir))
+ $(Q)cp -a $O/kmod/* $(DESTDIR)$(kerneldir)
+endif
-%_uninstall:
- @echo ================== Uninstalling $*
- $(Q)rm -rf $(BUILD_DIR)/$*
+install-sdk:
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(includedir))
+ $(Q)tar -chf - -C $O include | \
+ tar -xf - -C $(DESTDIR)$(includedir) --strip-components=1 \
+ --keep-newer-files
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(sdkdir))
+ $(Q)cp -a $(RTE_SDK)/mk $(DESTDIR)$(sdkdir)
+ $(Q)cp -a $(RTE_SDK)/buildtools $(DESTDIR)$(sdkdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(targetdir)/app)
+ $(Q)cp -a $O/.config $(DESTDIR)$(targetdir)
+ $(Q)cp -a $O/app/dpdk-pmdinfogen $(DESTDIR)$(targetdir)/app
+ $(Q)$(call rte_symlink, $(DESTDIR)$(includedir), $(DESTDIR)$(targetdir)/include)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(libdir), $(DESTDIR)$(targetdir)/lib)
+
+install-doc:
+ifneq ($(wildcard $O/doc/html),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(docdir))
+ $(Q)tar -cf - -C $O/doc html --exclude 'html/guides/.*' | \
+ tar -xf - -C $(DESTDIR)$(docdir) --strip-components=1 \
+ --keep-newer-files
+endif
+ifneq ($(wildcard $O/doc/*/*/*pdf),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(docdir)/guides)
+ $(Q)cp -a $O/doc/*/*/*pdf $(DESTDIR)$(docdir)/guides
+endif
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
+ $(Q)cp -a $(RTE_SDK)/examples $(DESTDIR)$(datadir)