#define KICKSTAND_DOWN(mode) ((mode) == I2C_COBBOARD_MODE_KICKSTAND_DOWN)
uint8_t state_debug = 0;
+static uint8_t state_cob_partial = 0;
uint8_t state_get_cob_count(void)
{
!sensor_get(S_COB_INSIDE_R);
}
+static uint8_t state_cob_inside_enhanced(void)
+{
+ if (sensor_get(S_COB_INSIDE_L))
+ state_cob_partial = 1;
+ if (sensor_get(S_COB_INSIDE_R))
+ state_cob_partial = 1;
+ return state_cob_inside();
+}
+
static uint8_t state_spicklemode_deployed(uint8_t side)
{
if (side == I2C_LEFT_SIDE)
/* harvest cobs from area */
static void state_do_harvest(uint8_t side)
{
+ uint8_t i = 0;
+
/* if there is no cob, return */
if (cob_falling_edge(side) == 0)
return;
cobroller_on(side);
/* check that cob is correctly in place */
- if (WAIT_COND_OR_TIMEOUT(state_cob_inside(), 750) == 0) {
- if (state_no_cob_inside()) {
+ state_cob_partial = 0;
+ if (WAIT_COND_OR_TIMEOUT(state_cob_inside_enhanced(), 750) == 0) {
+ if (state_no_cob_inside() && state_cob_partial == 0) {
STMCH_DEBUG("no cob");
return;
}
+ else if (state_no_cob_inside() && state_cob_partial == 1)
+ goto cont;
+
STMCH_DEBUG("bad cob state");
/* while cob is not correctly placed try to extract
time_wait_ms(250);
shovel_down();
time_wait_ms(250);
+
+ if (EJECT(state_mode))
+ return;
}
STMCH_DEBUG("cob removed");
}
}
+ cont:
/* cob is inside, switch off roller */
cobroller_off(side);
cob_count ++;
/* store it */
shovel_up();
+ i = 0;
while (WAIT_COND_OR_TIMEOUT(shovel_is_up(), 600) == 0) {
STMCH_DEBUG("shovel blocked");
shovel_down();
- time_wait_ms(250);
- shovel_up();
+
+ if (i == 4)
+ break;
+
/* if eject command is received, force exit */
if (EJECT(state_mode))
return;
+
+ time_wait_ms(250);
+ shovel_up();
+ i ++;
+ }
+
+ /* bad state, try to eject to cobs */
+ if (i == 4) {
+ servo_door_open();
+ shovel_mid();
+
+ while (WAIT_COND_OR_TIMEOUT(shovel_is_mid(), 600) == 0) {
+ STMCH_DEBUG("ejecting cobs");
+
+ shovel_down();
+ time_wait_ms(250);
+ if (state_no_cob_inside()) {
+ servo_door_close();
+ cob_count = 0;
+ return;
+ }
+ shovel_mid();
+ }
}
state_debug_wait_key_pressed();