--- /dev/null
+/* \r
+ * Copyright Droids Corporation, Microb Technology, Eirbot (2005)\r
+ * \r
+ * This program is free software; you can redistribute it and/or modify\r
+ * it under the terms of the GNU General Public License as published by\r
+ * the Free Software Foundation; either version 2 of the License, or\r
+ * (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
+ * GNU General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU General Public License\r
+ * along with this program; if not, write to the Free Software\r
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\r
+ *\r
+ * Revision : $Id: uart_config.h,v 1.3.10.1 2006-11-26 21:06:02 zer0 Exp $\r
+ *\r
+ */\r
+\r
+/* Droids-corp 2004 - Zer0\r
+ * config for uart module\r
+ */\r
+\r
+#ifndef UART_CONFIG_H\r
+#define UART_CONFIG_H\r
+\r
+/*\r
+ * UART0 definitions \r
+ */\r
+\r
+/* compile uart0 fonctions, undefine it to pass compilation */\r
+#define UART0_COMPILE \r
+\r
+/* enable uart0 if == 1, disable if == 0 */\r
+#define UART0_ENABLED 1\r
+\r
+/* enable uart0 interrupts if == 1, disable if == 0 */\r
+#define UART0_INTERRUPT_ENABLED 0\r
+\r
+#define UART0_BAUDRATE 57600\r
+\r
+/* \r
+ * if you enable this, the maximum baudrate you can reach is \r
+ * higher, but the precision is lower. \r
+ */\r
+#define UART0_USE_DOUBLE_SPEED 1\r
+//#define UART0_USE_DOUBLE_SPEED 1\r
+\r
+#define UART0_RX_FIFO_SIZE 4\r
+#define UART0_TX_FIFO_SIZE 1\r
+//#define UART0_NBITS 5\r
+//#define UART0_NBITS 6\r
+//#define UART0_NBITS 7\r
+#define UART0_NBITS 8\r
+//#define UART0_NBITS 9\r
+\r
+#define UART0_PARITY UART_PARTITY_NONE\r
+//#define UART0_PARITY UART_PARTITY_ODD\r
+//#define UART0_PARITY UART_PARTITY_EVEN\r
+\r
+#define UART0_STOP_BIT UART_STOP_BITS_1\r
+//#define UART0_STOP_BIT UART_STOP_BITS_2\r
+\r
+\r
+\r
+\r
+/* .... same for uart 1, 2, 3 ... */\r
+\r
+#endif\r
+\r