-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include "unistd.h"
#include <rte_common.h>
#include <rte_debug.h>
#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_log.h>
#include <rte_lcore.h>
#include <rte_memory.h>
#define TEST_MAX_NUMBER_OF_PORTS (6)
-#define RX_RING_SIZE 128
+#define RX_RING_SIZE 1024
#define RX_FREE_THRESH 32
#define RX_PTHRESH 8
#define RX_HTHRESH 8
#define RX_WTHRESH 0
-#define TX_RING_SIZE 512
+#define TX_RING_SIZE 1024
#define TX_FREE_THRESH 32
#define TX_PTHRESH 32
#define TX_HTHRESH 0
#define MAX_PKT_BURST (512)
#define DEF_PKT_BURST (16)
-#define BONDED_DEV_NAME ("unit_test_bond_dev")
+#define BONDED_DEV_NAME ("net_bonding_ut")
#define INVALID_SOCKET_ID (-1)
#define INVALID_PORT_ID (-1)
uint8_t bonded_mac[] = {0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF };
struct link_bonding_unittest_params {
- int8_t bonded_port_id;
- int8_t slave_port_ids[TEST_MAX_NUMBER_OF_PORTS];
- uint8_t bonded_slave_count;
+ int16_t bonded_port_id;
+ int16_t slave_port_ids[TEST_MAX_NUMBER_OF_PORTS];
+ uint16_t bonded_slave_count;
uint8_t bonding_mode;
uint16_t nb_rx_q;
};
+static void free_virtualpmd_tx_queue(void);
+
+
+
static int
-configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
+configure_ethdev(uint16_t port_id, uint8_t start, uint8_t en_isr)
{
int q_id;
{
int current_slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
/* Don't try to recreate bonded device if re-running test suite*/
if (test_params->bonded_port_id == -1) {
{
int current_slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(test_params->bonded_port_id,
test_params->slave_port_ids[test_params->bonded_slave_count]),
{
int current_slave_count;
struct ether_addr read_mac_addr, *mac_addr;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_remove(test_params->bonded_port_id,
test_params->slave_port_ids[test_params->bonded_slave_count-1]),
test_add_already_bonded_slave_to_bonded_device(void)
{
int port_id, current_slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
char pmd_name[RTE_ETH_NAME_MAX_LEN];
test_add_slave_to_bonded_device();
test_get_slaves_from_bonded_device(void)
{
int current_slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
"Failed to add slave to bonded device");
struct rte_eth_link link_status;
int current_slave_count, current_bonding_mode, primary_port;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
/* Add slave to bonded device*/
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
test_stop_bonded_device(void)
{
int current_slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
struct rte_eth_link link_status;
remove_slaves_and_stop_bonded_device(void)
{
/* Clean up and remove slaves from bonded device */
+ free_virtualpmd_tx_queue();
while (test_params->bonded_slave_count > 0)
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
"test_remove_slave_from_bonded_device failed");
{
int i, slave_count, bonded_port_id;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
int slave_port_ids[BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT];
struct ether_addr slave_mac_addr, bonded_mac_addr, read_mac_addr;
/*
* 1. a - Create / configure bonded / slave ethdevs
*/
- bonded_port_id = rte_eth_bond_create("ethdev_bond_mac_ass_test",
+ bonded_port_id = rte_eth_bond_create("net_bonding_mac_ass_test",
BONDING_MODE_ACTIVE_BACKUP, rte_socket_id());
TEST_ASSERT(bonded_port_id > 0, "failed to create bonded device");
static int
initialize_bonded_device_with_slaves(uint8_t bonding_mode, uint8_t bond_en_isr,
- uint8_t number_of_slaves, uint8_t enable_slave)
+ uint16_t number_of_slaves, uint8_t enable_slave)
{
/* Configure bonded device */
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 0,
int test_lsc_interrupt_count;
-static void
-test_bonding_lsc_event_callback(uint8_t port_id __rte_unused,
- enum rte_eth_event_type type __rte_unused, void *param __rte_unused)
+static int
+test_bonding_lsc_event_callback(uint16_t port_id __rte_unused,
+ enum rte_eth_event_type type __rte_unused,
+ void *param __rte_unused,
+ void *ret_param __rte_unused)
{
pthread_mutex_lock(&mutex);
test_lsc_interrupt_count++;
pthread_cond_signal(&cvar);
pthread_mutex_unlock(&mutex);
+
+ return 0;
}
static inline int
test_status_interrupt(void)
{
int slave_count;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
/* initialized bonding device with T slaves */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
static int
generate_test_burst(struct rte_mbuf **pkts_burst, uint16_t burst_size,
uint8_t vlan, uint8_t ipv4, uint8_t toggle_dst_mac,
- uint8_t toggle_ip_addr, uint8_t toggle_udp_port)
+ uint8_t toggle_ip_addr, uint16_t toggle_udp_port)
{
uint16_t pktlen, generated_burst_size, ether_type;
void *ip_hdr;
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_ROUND_ROBIN, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
burst_size = 20 * test_params->bonded_slave_count;
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_ROUND_ROBIN, 0,
TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
TEST_ASSERT_EQUAL(generate_test_burst(pkt_burst,
/* free mbufs */
for (i = 0; i < MAX_PKT_BURST; i++) {
- if (gen_pkt_burst[i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[i]);
-
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
}
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
struct rte_eth_stats port_stats;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
int i, burst_size, slave_count;
for (i = 0; i < MAX_PKT_BURST; i++) {
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
-
- if (gen_pkt_burst[1][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
-
- if (gen_pkt_burst[3][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
}
/* Clean up and remove slaves from bonded device */
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
struct rte_eth_stats port_stats;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count, primary_port;
+ int i, burst_size, slave_count, primary_port;
burst_size = 21;
"(%d) port_stats.opackets not as expected",
test_params->slave_port_ids[3]);
- /* free mbufs */
- for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
static int
test_balance_l23_tx_burst_ipv4_toggle_ip_addr(void)
{
- return balance_l23_tx_burst(0, 1, 1, 0);
+ return balance_l23_tx_burst(0, 1, 0, 1);
}
static int
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0,
TEST_BAL_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 3, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
rte_eth_promiscuous_enable(test_params->bonded_port_id);
/* Initialize bonded device with 2 slaves in active backup mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Verify that bonded MACs is that of first slave and that the other slave
* MAC hasn't been changed */
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
struct rte_eth_stats port_stats;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count;
+ int i, burst_size, slave_count;
memset(pkt_burst, 0, sizeof(pkt_burst));
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
test_params->bonded_port_id, (int)port_stats.ipackets,
burst_size * 3);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
initialize_eth_header(test_params->pkt_eth_hdr,
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0,
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0,
TEST_BCAST_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts for transmission */
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst,
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 3, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
for (i = 0; i < BROADCAST_RX_BURST_NUM_OF_SLAVES; i++) {
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
rte_eth_promiscuous_enable(test_params->bonded_port_id);
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Verify that all MACs are the same as first slave added to bonded
* device */
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
struct rte_eth_stats port_stats;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count;
+ int i, burst_size, slave_count;
memset(pkt_burst, 0, sizeof(pkt_burst));
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, BROADCAST_LINK_STATUS_NUM_OF_SLAVES,
- 1), "Failed to intialise bonded device");
+ 1), "Failed to initialise bonded device");
/* Verify Current Slaves Count /Active Slave Count is */
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
/* Set explicit MAC address */
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
- "failed to set MAC addres");
+ "failed to set MAC address");
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
struct rte_eth_stats port_stats;
- uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint16_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count, primary_port;
+ int i, burst_size, slave_count, primary_port;
burst_size = 21;
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs */
-
- for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}