When Ultra Low Power (ULP) enabled, the client PHY needs to be set up
for link configuration after cable reconnected.
Previously link configuration was only done in auto-negotiate mode.
Do link configuration also in autoneg disabled mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
if (hw->mac.autoneg)
e1000_phy_setup_autoneg(hw);
if (hw->mac.autoneg)
e1000_phy_setup_autoneg(hw);
+ else
+ e1000_setup_copper_link_generic(hw);
e1000_sw_lcd_config_ich8lan(hw);
e1000_sw_lcd_config_ich8lan(hw);