The MAC register NW_MNG_IF_SEL fields have been redefined for X553.
These changes impact the iXFI driver code flow. Since iXFI is only
supported in X552, this patch adds X552 MAC check for iXFI flows.
Signed-off-by: Wei Dai <wei.dai@intel.com>
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G (1u << 19)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G (1u << 20)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G (1u << 21)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G (1u << 19)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G (1u << 20)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G (1u << 21)
-#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M (1 << 23)
-#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
+#define IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE (1u << 25)
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24) /* X552 reg field only */
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \
(0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \
(0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)
+ /* iXFI is only supported with X552 */
+ if (mac->type != ixgbe_mac_X550EM_x)
+ return IXGBE_ERR_LINK_SETUP;
+
/* Disable AN and force speed to 10G Serial. */
status = mac->ops.read_iosf_sb_reg(hw,
IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
/* Disable AN and force speed to 10G Serial. */
status = mac->ops.read_iosf_sb_reg(hw,
IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
/* If link is down, there is no setup necessary so return */
status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
if (status != IXGBE_SUCCESS)
/* If link is down, there is no setup necessary so return */
status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
if (status != IXGBE_SUCCESS)
else
force_speed = IXGBE_LINK_SPEED_1GB_FULL;
else
force_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If internal link mode is XFI, then setup XFI internal link. */
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ /* If X552 and internal link mode is XFI, then setup XFI internal link.
+ */
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
if (status != IXGBE_SUCCESS)
status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
if (status != IXGBE_SUCCESS)