/* Reset dynamic ixgbe_rx_queue fields back to defaults */
static void
-ixgbe_reset_rx_queue(struct ixgbe_rx_queue *rxq)
+ixgbe_reset_rx_queue(struct ixgbe_hw *hw, struct ixgbe_rx_queue *rxq)
{
static const union ixgbe_adv_rx_desc zeroed_desc = { .read = {
.pkt_addr = 0}};
unsigned i;
- uint16_t len;
+ uint16_t len = rxq->nb_rx_desc;
/*
* By default, the Rx queue setup function allocates enough memory for
* constraints here to see if we need to zero out memory after the end
* of the H/W descriptor ring.
*/
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
- if (check_rx_burst_bulk_alloc_preconditions(rxq) == 0)
+ if (hw->rx_bulk_alloc_allowed)
/* zero out extra memory */
- len = (uint16_t)(rxq->nb_rx_desc + RTE_PMD_IXGBE_RX_MAX_BURST);
- else
-#endif
- /* do not zero out extra memory */
- len = rxq->nb_rx_desc;
+ len += RTE_PMD_IXGBE_RX_MAX_BURST;
/*
* Zero out HW ring memory. Zero out extra memory at the end of
const struct rte_memzone *rz;
struct ixgbe_rx_queue *rxq;
struct ixgbe_hw *hw;
- int use_def_burst_func = 1;
uint16_t len;
PMD_INIT_FUNC_TRACE();
#endif
rxq->rx_ring = (union ixgbe_adv_rx_desc *) rz->addr;
+ /*
+ * Certain constraints must be met in order to use the bulk buffer
+ * allocation Rx burst function. If any of Rx queues doesn't meet them
+ * the feature should be disabled for the whole port.
+ */
+ if (check_rx_burst_bulk_alloc_preconditions(rxq)) {
+ PMD_INIT_LOG(DEBUG, "queue[%d] doesn't meet Rx Bulk Alloc "
+ "preconditions - canceling the feature for "
+ "the whole port[%d]",
+ rxq->queue_id, rxq->port_id);
+ hw->rx_bulk_alloc_allowed = false;
+ }
+
/*
* Allocate software ring. Allow for space at the end of the
* S/W ring to make sure look-ahead logic in bulk alloc Rx burst
* function does not access an invalid memory region.
*/
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
- len = (uint16_t)(nb_desc + RTE_PMD_IXGBE_RX_MAX_BURST);
-#else
len = nb_desc;
-#endif
+ if (hw->rx_bulk_alloc_allowed)
+ len += RTE_PMD_IXGBE_RX_MAX_BURST;
+
rxq->sw_ring = rte_zmalloc_socket("rxq->sw_ring",
sizeof(struct ixgbe_rx_entry) * len,
RTE_CACHE_LINE_SIZE, socket_id);
PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64,
rxq->sw_ring, rxq->rx_ring, rxq->rx_ring_phys_addr);
- /*
- * Certain constraints must be met in order to use the bulk buffer
- * allocation Rx burst function.
- */
- use_def_burst_func = check_rx_burst_bulk_alloc_preconditions(rxq);
+ if (!rte_is_power_of_2(nb_desc)) {
+ PMD_INIT_LOG(DEBUG, "queue[%d] doesn't meet Vector Rx "
+ "preconditions - canceling the feature for "
+ "the whole port[%d]",
+ rxq->queue_id, rxq->port_id);
+ hw->rx_vec_allowed = false;
+ } else
+ ixgbe_rxq_vec_setup(rxq);
-#ifdef RTE_IXGBE_INC_VECTOR
- ixgbe_rxq_vec_setup(rxq);
-#endif
- /* Check if pre-conditions are satisfied, and no Scattered Rx */
- if (!use_def_burst_func && !dev->data->scattered_rx) {
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
- PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
- "satisfied. Rx Burst Bulk Alloc function will be "
- "used on port=%d, queue=%d.",
- rxq->port_id, rxq->queue_id);
- dev->rx_pkt_burst = ixgbe_recv_pkts_bulk_alloc;
-#ifdef RTE_IXGBE_INC_VECTOR
- if (!ixgbe_rx_vec_condition_check(dev) &&
- (rte_is_power_of_2(nb_desc))) {
- PMD_INIT_LOG(INFO, "Vector rx enabled, please make "
- "sure RX burst size no less than 32.");
- dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
- }
-#endif
-#endif
- } else {
- PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions "
- "are not satisfied, Scattered Rx is requested, "
- "or RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC is not "
- "enabled (port=%d, queue=%d).",
- rxq->port_id, rxq->queue_id);
- }
dev->data->rx_queues[queue_idx] = rxq;
- ixgbe_reset_rx_queue(rxq);
+ ixgbe_reset_rx_queue(hw, rxq);
return 0;
}
ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
{
unsigned i;
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i];
if (rxq != NULL) {
ixgbe_rx_queue_release_mbufs(rxq);
- ixgbe_reset_rx_queue(rxq);
+ ixgbe_reset_rx_queue(hw, rxq);
}
}
}
return 0;
}
+void ixgbe_set_rx_function(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ /*
+ * In order to allow Vector Rx there are a few configuration
+ * conditions to be met and Rx Bulk Allocation should be allowed.
+ */
+ if (ixgbe_rx_vec_dev_conf_condition_check(dev) ||
+ !hw->rx_bulk_alloc_allowed) {
+ PMD_INIT_LOG(DEBUG, "Port[%d] doesn't meet Vector Rx "
+ "preconditions or RTE_IXGBE_INC_VECTOR is "
+ "not enabled",
+ dev->data->port_id);
+
+ hw->rx_vec_allowed = false;
+ }
+
+ if (dev->data->scattered_rx) {
+ /*
+ * Set the non-LRO scattered callback: there are Vector and
+ * single allocation versions.
+ */
+ if (hw->rx_vec_allowed) {
+ PMD_INIT_LOG(DEBUG, "Using Vector Scattered Rx "
+ "callback (port=%d).",
+ dev->data->port_id);
+
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
+ } else {
+ PMD_INIT_LOG(DEBUG, "Using Regualr (non-vector) "
+ "Scattered Rx callback "
+ "(port=%d).",
+ dev->data->port_id);
+
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+ }
+ /*
+ * Below we set "simple" callbacks according to port/queues parameters.
+ * If parameters allow we are going to choose between the following
+ * callbacks:
+ * - Vector
+ * - Bulk Allocation
+ * - Single buffer allocation (the simplest one)
+ */
+ } else if (hw->rx_vec_allowed) {
+ PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX "
+ "burst size no less than 32.");
+
+ dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
+ } else if (hw->rx_bulk_alloc_allowed) {
+ PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
+ "satisfied. Rx Burst Bulk Alloc function "
+ "will be used on port=%d.",
+ dev->data->port_id);
+
+ dev->rx_pkt_burst = ixgbe_recv_pkts_bulk_alloc;
+ } else {
+ PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are not "
+ "satisfied, or Scattered Rx is requested, "
+ "or RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC "
+ "is not enabled (port=%d).",
+ dev->data->port_id);
+
+ dev->rx_pkt_burst = ixgbe_recv_pkts;
+ }
+}
+
/*
* Initializes Receive Unit.
*/
buf_size = (uint16_t) ((srrctl & IXGBE_SRRCTL_BSIZEPKT_MASK) <<
IXGBE_SRRCTL_BSIZEPKT_SHIFT);
- if (dev->data->dev_conf.rxmode.enable_scatter ||
- /* It adds dual VLAN length for supporting dual VLAN */
- (dev->data->dev_conf.rxmode.max_rx_pkt_len +
- 2 * IXGBE_VLAN_TAG_SIZE) > buf_size){
- if (!dev->data->scattered_rx)
- PMD_INIT_LOG(DEBUG, "forcing scatter mode");
+ /* It adds dual VLAN length for supporting dual VLAN */
+ if (dev->data->dev_conf.rxmode.max_rx_pkt_len +
+ 2 * IXGBE_VLAN_TAG_SIZE > buf_size)
dev->data->scattered_rx = 1;
-#ifdef RTE_IXGBE_INC_VECTOR
- if (rte_is_power_of_2(rxq->nb_rx_desc))
- dev->rx_pkt_burst =
- ixgbe_recv_scattered_pkts_vec;
- else
-#endif
- dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
- }
}
+ if (dev->data->dev_conf.rxmode.enable_scatter)
+ dev->data->scattered_rx = 1;
+
+ ixgbe_set_rx_function(dev);
+
/*
* Device configured with multiple RX queues.
*/
rte_delay_us(RTE_IXGBE_WAIT_100_US);
ixgbe_rx_queue_release_mbufs(rxq);
- ixgbe_reset_rx_queue(rxq);
+ ixgbe_reset_rx_queue(hw, rxq);
} else
return -1;
}
}
+
+/* Stubs needed for linkage when CONFIG_RTE_IXGBE_INC_VECTOR is set to 'n' */
+int __attribute__((weak))
+ixgbe_rx_vec_dev_conf_condition_check(struct rte_eth_dev __rte_unused *dev)
+{
+ return -1;
+}
+
+uint16_t __attribute__((weak))
+ixgbe_recv_pkts_vec(
+ void __rte_unused *rx_queue,
+ struct rte_mbuf __rte_unused **rx_pkts,
+ uint16_t __rte_unused nb_pkts)
+{
+ return 0;
+}
+
+uint16_t __attribute__((weak))
+ixgbe_recv_scattered_pkts_vec(
+ void __rte_unused *rx_queue,
+ struct rte_mbuf __rte_unused **rx_pkts,
+ uint16_t __rte_unused nb_pkts)
+{
+ return 0;
+}
+
+int __attribute__((weak))
+ixgbe_rxq_vec_setup(struct ixgbe_rx_queue __rte_unused *rxq)
+{
+ return -1;
+}
git.droids-corp.org / dpdk.git / commitdiff