app/testpmd: fix txonly forwarding
authorAlvin Zhang <alvinx.zhang@intel.com>
Thu, 23 Sep 2021 08:01:29 +0000 (16:01 +0800)
committerFerruh Yigit <ferruh.yigit@intel.com>
Fri, 8 Oct 2021 16:57:48 +0000 (18:57 +0200)
When random number of Tx segments is enabled, because the actual
number of segments may be only one, the first segment of the Tx
packets must accommodate a complete being sending Eth/IP/UDP packet.

Besides, if multiple flow is enabled, the forwarding will update
the IP and UDP header, these headers shouldn't cross segments.
This also requires the first Tx segment can accommodate a complete
Eth/IP/UDP packet.

In addition, if time stamp is enabled, the forwarding needs more
Tx segment space for time stamp information.

This patch adds checks in beginning of forward engine to make sure
all above conditions are met.

Bugzilla ID: 797
Fixes: 79bec05b32b7 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
app/test-pmd/txonly.c

index 6b3651f..e45f884 100644 (file)
 
 #include "testpmd.h"
 
+struct tx_timestamp {
+       rte_be32_t signature;
+       rte_be16_t pkt_idx;
+       rte_be16_t queue_idx;
+       rte_be64_t ts;
+};
+
 /* use RFC863 Discard Protocol */
 uint16_t tx_udp_src_port = 9;
 uint16_t tx_udp_dst_port = 9;
@@ -257,12 +264,7 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
 
        if (unlikely(timestamp_enable)) {
                uint64_t skew = RTE_PER_LCORE(timestamp_qskew);
-               struct {
-                       rte_be32_t signature;
-                       rte_be16_t pkt_idx;
-                       rte_be16_t queue_idx;
-                       rte_be64_t ts;
-               } timestamp_mark;
+               struct tx_timestamp timestamp_mark;
 
                if (unlikely(timestamp_init_req !=
                                RTE_PER_LCORE(timestamp_idone))) {
@@ -438,13 +440,23 @@ pkt_burst_transmit(struct fwd_stream *fs)
 static int
 tx_only_begin(portid_t pi)
 {
-       uint16_t pkt_data_len;
+       uint16_t pkt_hdr_len, pkt_data_len;
        int dynf;
 
-       pkt_data_len = (uint16_t) (tx_pkt_length - (
-                                       sizeof(struct rte_ether_hdr) +
-                                       sizeof(struct rte_ipv4_hdr) +
-                                       sizeof(struct rte_udp_hdr)));
+       pkt_hdr_len = (uint16_t)(sizeof(struct rte_ether_hdr) +
+                                sizeof(struct rte_ipv4_hdr) +
+                                sizeof(struct rte_udp_hdr));
+       pkt_data_len = tx_pkt_length - pkt_hdr_len;
+
+       if ((tx_pkt_split == TX_PKT_SPLIT_RND || txonly_multi_flow) &&
+           tx_pkt_seg_lengths[0] < pkt_hdr_len) {
+               TESTPMD_LOG(ERR,
+                           "Random segment number or multiple flow is enabled, "
+                           "but tx_pkt_seg_lengths[0] %u < %u (needed)\n",
+                           tx_pkt_seg_lengths[0], pkt_hdr_len);
+               return -EINVAL;
+       }
+
        setup_pkt_udp_ip_headers(&pkt_ip_hdr, &pkt_udp_hdr, pkt_data_len);
 
        timestamp_enable = false;
@@ -463,8 +475,39 @@ tx_only_begin(portid_t pi)
                           timestamp_mask &&
                           timestamp_off >= 0 &&
                           !rte_eth_read_clock(pi, &timestamp_initial[pi]);
-       if (timestamp_enable)
+
+       if (timestamp_enable) {
+               pkt_hdr_len += sizeof(struct tx_timestamp);
+
+               if (tx_pkt_split == TX_PKT_SPLIT_RND) {
+                       if (tx_pkt_seg_lengths[0] < pkt_hdr_len) {
+                               TESTPMD_LOG(ERR,
+                                           "Time stamp and random segment number are enabled, "
+                                           "but tx_pkt_seg_lengths[0] %u < %u (needed)\n",
+                                           tx_pkt_seg_lengths[0], pkt_hdr_len);
+                               return -EINVAL;
+                       }
+               } else {
+                       uint16_t total = 0;
+                       uint8_t i;
+
+                       for (i = 0; i < tx_pkt_nb_segs; i++) {
+                               total += tx_pkt_seg_lengths[i];
+                               if (total >= pkt_hdr_len)
+                                       break;
+                       }
+
+                       if (total < pkt_hdr_len) {
+                               TESTPMD_LOG(ERR,
+                                           "Not enough Tx segment space for time stamp info, "
+                                           "total %u < %u (needed)\n",
+                                           total, pkt_hdr_len);
+                               return -EINVAL;
+                       }
+               }
                timestamp_init_req++;
+       }
+
        /* Make sure all settings are visible on forwarding cores.*/
        rte_wmb();
        return 0;