net/mlx5: inherit master link settings for representors

There are some physical link settings can be queried from
Ethernet devices: link status, link speed, speed capabilities,
duplex mode, etc. These setting do not make a lot of sense for
representors due to missing physical link. The new kernel drivers
dropped query for link settings for representors causing the
ioctl call to fail. This patch adds some kind of emulation
of link settings to PMD - representors inherit the link parameters
from the master device. The actual link status (up/down)
is retrieved from the representor device.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>

diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 57a6449..d1a70fc 100644 (file)
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -627,6 +627,36 @@ mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
        return NULL;
 }
 
+/**
+ * Retrieve the master device for representor in the same switch domain.
+ *
+ * @param dev
+ *   Pointer to representor Ethernet device structure.
+ *
+ * @return
+ *   Master device structure  on success, NULL otherwise.
+ */
+
+static struct rte_eth_dev *
+mlx5_find_master_dev(struct rte_eth_dev *dev)
+{
+       struct mlx5_priv *priv;
+       uint16_t port_id;
+       uint16_t domain_id;
+
+       priv = dev->data->dev_private;
+       domain_id = priv->domain_id;
+       assert(priv->representor);
+       RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) {
+               priv = rte_eth_devices[port_id].data->dev_private;
+               if (priv &&
+                   priv->master &&
+                   priv->domain_id == domain_id)
+                       return &rte_eth_devices[port_id];
+       }
+       return NULL;
+}
+
 /**
  * DPDK callback to retrieve physical link information.
  *
@@ -666,10 +696,34 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
        };
        ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
        if (ret) {
-               DRV_LOG(WARNING,
-                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
-                       dev->data->port_id, strerror(rte_errno));
-               return ret;
+               if (ret == -ENOTSUP && priv->representor) {
+                       struct rte_eth_dev *master;
+
+                       /*
+                        * For representors we can try to inherit link
+                        * settings from the master device. Actually
+                        * link settings do not make a lot of sense
+                        * for representors due to missing physical
+                        * link. The old kernel drivers supported
+                        * emulated settings query for representors,
+                        * the new ones do not, so we have to add
+                        * this code for compatibility issues.
+                        */
+                       master = mlx5_find_master_dev(dev);
+                       if (master) {
+                               ifr = (struct ifreq) {
+                                       .ifr_data = (void *)&edata,
+                               };
+                               ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
+                       }
+               }
+               if (ret) {
+                       DRV_LOG(WARNING,
+                               "port %u ioctl(SIOCETHTOOL,"
+                               " ETHTOOL_GSET) failed: %s",
+                               dev->data->port_id, strerror(rte_errno));
+                       return ret;
+               }
        }
        link_speed = ethtool_cmd_speed(&edata);
        if (link_speed == -1)
@@ -722,6 +776,7 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
        struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
        struct ifreq ifr;
        struct rte_eth_link dev_link;
+       struct rte_eth_dev *master = NULL;
        uint64_t sc;
        int ret;
 
@@ -740,11 +795,33 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
        };
        ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
        if (ret) {
-               DRV_LOG(DEBUG,
-                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)"
-                       " failed: %s",
-                       dev->data->port_id, strerror(rte_errno));
-               return ret;
+               if (ret == -ENOTSUP && priv->representor) {
+                       /*
+                        * For representors we can try to inherit link
+                        * settings from the master device. Actually
+                        * link settings do not make a lot of sense
+                        * for representors due to missing physical
+                        * link. The old kernel drivers supported
+                        * emulated settings query for representors,
+                        * the new ones do not, so we have to add
+                        * this code for compatibility issues.
+                        */
+                       master = mlx5_find_master_dev(dev);
+                       if (master) {
+                               ifr = (struct ifreq) {
+                                       .ifr_data = (void *)&gcmd,
+                               };
+                               ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
+                       }
+               }
+               if (ret) {
+                       DRV_LOG(DEBUG,
+                               "port %u ioctl(SIOCETHTOOL,"
+                               " ETHTOOL_GLINKSETTINGS) failed: %s",
+                               dev->data->port_id, strerror(rte_errno));
+                       return ret;
+               }
+
        }
        gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords;
 
@@ -755,11 +832,11 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
 
        *ecmd = gcmd;
        ifr.ifr_data = (void *)ecmd;
-       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       ret = mlx5_ifreq(master ? master : dev, SIOCETHTOOL, &ifr);
        if (ret) {
                DRV_LOG(DEBUG,
-                       "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)"
-                       " failed: %s",
+                       "port %u ioctl(SIOCETHTOOL,"
+                       "ETHTOOL_GLINKSETTINGS) failed: %s",
                        dev->data->port_id, strerror(rte_errno));
                return ret;
        }