} __attribute__((packed));
/********************************
- * hwrm_cfa_ntuple_filter_alloc *
+ * hwrm_cfa_tunnel_filter_alloc *
********************************/
-/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
-struct hwrm_cfa_ntuple_filter_alloc_input {
+/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */
+struct hwrm_cfa_tunnel_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
uint64_t resp_addr;
uint32_t flags;
/* Setting of this flag indicates the applicability to the loopback path. */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x2)
- /*
- * Setting of this flag indicates that a meter is expected to be attached
- * to this flow. This hint can be used when choosing the action record
- * format required for the flow.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
- UINT32_C(0x4)
uint32_t enables;
/*
* This bit must be '1' for the l2_filter_id field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
UINT32_C(0x1)
/*
- * This bit must be '1' for the ethertype field to be
+ * This bit must be '1' for the l2_addr field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
UINT32_C(0x2)
/*
- * This bit must be '1' for the tunnel_type field to be
+ * This bit must be '1' for the l2_ivlan field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
UINT32_C(0x4)
/*
- * This bit must be '1' for the src_macaddr field to be
+ * This bit must be '1' for the l3_addr field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \
UINT32_C(0x8)
/*
- * This bit must be '1' for the ipaddr_type field to be
+ * This bit must be '1' for the l3_addr_type field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \
UINT32_C(0x10)
/*
- * This bit must be '1' for the src_ipaddr field to be
+ * This bit must be '1' for the t_l3_addr_type field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \
UINT32_C(0x20)
/*
- * This bit must be '1' for the src_ipaddr_mask field to be
+ * This bit must be '1' for the t_l3_addr field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \
UINT32_C(0x40)
/*
- * This bit must be '1' for the dst_ipaddr field to be
+ * This bit must be '1' for the tunnel_type field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
UINT32_C(0x80)
/*
- * This bit must be '1' for the dst_ipaddr_mask field to be
+ * This bit must be '1' for the vni field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \
UINT32_C(0x100)
/*
- * This bit must be '1' for the ip_protocol field to be
+ * This bit must be '1' for the dst_vnic_id field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \
UINT32_C(0x200)
- /*
- * This bit must be '1' for the src_port field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
- UINT32_C(0x400)
- /*
- * This bit must be '1' for the src_port_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
- UINT32_C(0x800)
- /*
- * This bit must be '1' for the dst_port field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
- UINT32_C(0x1000)
- /*
- * This bit must be '1' for the dst_port_mask field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
- UINT32_C(0x2000)
- /*
- * This bit must be '1' for the pri_hint field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
- UINT32_C(0x4000)
- /*
- * This bit must be '1' for the ntuple_filter_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
- UINT32_C(0x8000)
- /*
- * This bit must be '1' for the dst_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x10000)
/*
* This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x20000)
- /*
- * This bit must be '1' for the dst_macaddr field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
- UINT32_C(0x40000)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x400)
/*
* This value identifies a set of CFA data structures used for an L2
* context.
*/
uint64_t l2_filter_id;
/*
- * This value indicates the source MAC address in
- * the Ethernet header.
+ * This value sets the match value for the inner L2
+ * MAC address.
+ * Destination MAC address for RX path.
+ * Source MAC address for TX path.
*/
- uint8_t src_macaddr[6];
- /* This value indicates the ethertype in the Ethernet header. */
- uint16_t ethertype;
+ uint8_t l2_addr[6];
/*
- * This value indicates the type of IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
+ * This value sets VLAN ID value for inner VLAN.
+ * Only 12-bits of VLAN ID are used in setting the filter.
*/
- uint8_t ip_addr_type;
- /* invalid */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
- UINT32_C(0x0)
- /* IPv4 */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
- UINT32_C(0x4)
- /* IPv6 */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
- UINT32_C(0x6)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ uint16_t l2_ivlan;
/*
- * The value of protocol filed in IP header.
- * Applies to UDP and TCP traffic.
- * 6 - TCP
- * 17 - UDP
+ * The value of inner destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
*/
- uint8_t ip_protocol;
- /* invalid */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
- UINT32_C(0x0)
- /* TCP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
- UINT32_C(0x6)
- /* UDP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
- UINT32_C(0x11)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+ uint32_t l3_addr[4];
/*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
+ * The value of tunnel destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
*/
- uint16_t dst_id;
+ uint32_t t_l3_addr[4];
/*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * This value indicates the type of inner IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
*/
- uint16_t mirror_vnic_id;
+ uint8_t l3_addr_type;
/*
- * This value indicates the tunnel type for this filter.
- * If this field is not specified, then the filter shall
- * apply to both non-tunneled and tunneled packets.
- * If this field conflicts with the tunnel_type specified
- * in the l2_filter_id, then the HWRM shall return an
- * error for this command.
+ * This value indicates the type of tunnel IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
*/
+ uint8_t t_l3_addr_type;
+ /* Tunnel Type. */
uint8_t tunnel_type;
/* Non-tunnel */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
UINT32_C(0x3)
/* IP in IP */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
/* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
UINT32_C(0x7)
/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
/* Any tunneled traffic */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
- /*
- * This hint is provided to help in placing
- * the filter in the filter table.
- */
- uint8_t pri_hint;
- /* No preference */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
- UINT32_C(0x0)
- /* Above the given filter */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
- UINT32_C(0x1)
- /* Below the given filter */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
- UINT32_C(0x2)
- /* As high as possible */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
- UINT32_C(0x3)
- /* As low as possible */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
- UINT32_C(0x4)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
- /*
- * The value of source IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
- */
- uint32_t src_ipaddr[4];
- /*
- * The value of source IP address mask to be used in
- * filtering.
- * For IPv4, first four bytes represent the IP address mask.
- */
- uint32_t src_ipaddr_mask[4];
- /*
- * The value of destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
- */
- uint32_t dst_ipaddr[4];
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
/*
- * The value of destination IP address mask to be used in
- * filtering.
- * For IPv4, first four bytes represent the IP address mask.
+ * tunnel_flags allows the user to indicate the tunnel tag detection
+ * for the tunnel type specified in tunnel_type.
*/
- uint32_t dst_ipaddr_mask[4];
+ uint8_t tunnel_flags;
/*
- * The value of source port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to match the geneve OAM packet.
+ * If the tunnel_type is nvgre or gre, then this bit indicates if
+ * we need to detect checksum present bit in geneve header.
+ * If the tunnel_type is mpls, then this bit indicates if we need
+ * to match mpls packet with explicit IPV4/IPV6 null header.
*/
- uint16_t src_port;
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \
+ UINT32_C(0x1)
/*
- * The value of source port mask to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to detect the critical option bit set in the oam packet.
+ * If the tunnel_type is nvgre or gre, then this bit indicates
+ * if we need to match nvgre packets with key present bit set in
+ * gre header.
+ * If the tunnel_type is mpls, then this bit indicates if we
+ * need to match mpls packet with S bit from inner/second label.
*/
- uint16_t src_port_mask;
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \
+ UINT32_C(0x2)
/*
- * The value of destination port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * If the tunnel_type is geneve, then this bit indicates if we
+ * need to match geneve packet with extended header bit set in
+ * geneve header.
+ * If the tunnel_type is nvgre or gre, then this bit indicates
+ * if we need to match nvgre packets with sequence number
+ * present bit set in gre header.
+ * If the tunnel_type is mpls, then this bit indicates if we
+ * need to match mpls packet with S bit from out/first label.
*/
- uint16_t dst_port;
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \
+ UINT32_C(0x4)
/*
- * The value of destination port mask to be used in
- * filtering.
- * Applies to UDP and TCP traffic.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
*/
- uint16_t dst_port_mask;
+ uint32_t vni;
+ /* Logical VNIC ID of the destination VNIC. */
+ uint32_t dst_vnic_id;
/*
- * This is the ID of the filter that goes along with
- * the pri_hint.
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
*/
- uint64_t ntuple_filter_id_hint;
+ uint32_t mirror_vnic_id;
} __attribute__((packed));
-/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_alloc_output {
+/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_tunnel_filter_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
+ uint64_t tunnel_filter_id;
/*
* This is the ID of the flow associated with this
* filter.
uint8_t valid;
} __attribute__((packed));
-/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
-struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
+/*******************************
+ * hwrm_cfa_tunnel_filter_free *
+ *******************************/
+
+
+/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_tunnel_filter_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint8_t code;
- /* Unknown error */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
- UINT32_C(0x0)
- /* Unable to complete operation due to conflict with Rx Mask VLAN */
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
- UINT32_C(0x1)
- #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
- HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t tunnel_filter_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_tunnel_filter_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
} __attribute__((packed));
-/*******************************
- * hwrm_cfa_ntuple_filter_free *
- *******************************/
+/***************************************
+ * hwrm_cfa_redirect_tunnel_type_alloc *
+ ***************************************/
-/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_free_input {
+/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ /* Tunnel alloc flags. */
+ uint8_t flags;
+ /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
+ UINT32_C(0x1)
+ uint8_t unused_0[4];
} __attribute__((packed));
-/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_free_output {
+/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t valid;
} __attribute__((packed));
-/******************************
- * hwrm_cfa_ntuple_filter_cfg *
- ******************************/
+/**************************************
+ * hwrm_cfa_redirect_tunnel_type_free *
+ **************************************/
-/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
-struct hwrm_cfa_ntuple_filter_cfg_input {
+/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
- /*
- * This bit must be '1' for the new_dst_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
- /*
- * This bit must be '1' for the new_mirror_vnic_id field to be
- * configured.
- */
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[5];
+} __attribute__((packed));
+
+/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
- * This bit must be '1' for the new_meter_instance_id field to be
- * configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
- UINT32_C(0x4)
- uint8_t unused_0[4];
- /* This value is an opaque id into CFA data structures. */
- uint64_t ntuple_filter_id;
+ uint8_t valid;
+} __attribute__((packed));
+
+/**************************************
+ * hwrm_cfa_redirect_tunnel_type_info *
+ **************************************/
+
+
+/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */
+struct hwrm_cfa_redirect_tunnel_type_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * If set, this value shall represent the new
- * Logical VNIC ID of the destination VNIC for the RX
- * path and new network port id of the destination port for
- * the TX path.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint32_t new_dst_id;
+ uint16_t cmpl_ring;
/*
- * New Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint32_t new_mirror_vnic_id;
+ uint16_t seq_id;
/*
- * New meter to attach to the flow. Specifying the
- * invalid instance ID is used to remove any existing
- * meter from the flow.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
*/
- uint16_t new_meter_instance_id;
+ uint16_t target_id;
/*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
- HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
- uint8_t unused_1[6];
+ uint64_t resp_addr;
+ /* The source function id. */
+ uint16_t src_fid;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[5];
} __attribute__((packed));
-/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_cfg_output {
+/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */
+struct hwrm_cfa_redirect_tunnel_type_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* The destination function id, to whom the traffic is redirected. */
+ uint16_t dest_fid;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __attribute__((packed));
-/**************************
- * hwrm_cfa_em_flow_alloc *
- **************************/
+/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */
+struct hwrm_vxlan_ipv4_hdr {
+ /* IPv4 version and header length. */
+ uint8_t ver_hlen;
+ /* IPv4 header length */
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf)
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0
+ /* Version */
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0)
+ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4
+ /* IPv4 type of service. */
+ uint8_t tos;
+ /* IPv4 identification. */
+ uint16_t ip_id;
+ /* IPv4 flags and offset. */
+ uint16_t flags_frag_offset;
+ /* IPv4 TTL. */
+ uint8_t ttl;
+ /* IPv4 protocol. */
+ uint8_t protocol;
+ /* IPv4 source address. */
+ uint32_t src_ip_addr;
+ /* IPv4 destination address. */
+ uint32_t dest_ip_addr;
+} __attribute__((packed));
+
+/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */
+struct hwrm_vxlan_ipv6_hdr {
+ /* IPv6 version, traffic class and flow label. */
+ uint32_t ver_tc_flow_label;
+ /* IPv6 version shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \
+ UINT32_C(0x1c)
+ /* IPv6 version mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \
+ UINT32_C(0xf0000000)
+ /* IPv6 TC shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \
+ UINT32_C(0x14)
+ /* IPv6 TC mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \
+ UINT32_C(0xff00000)
+ /* IPv6 flow label shift */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \
+ UINT32_C(0x0)
+ /* IPv6 flow label mask */
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \
+ UINT32_C(0xfffff)
+ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \
+ HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK
+ /* IPv6 payload length. */
+ uint16_t payload_len;
+ /* IPv6 next header. */
+ uint8_t next_hdr;
+ /* IPv6 TTL. */
+ uint8_t ttl;
+ /* IPv6 source address. */
+ uint32_t src_ip_addr[4];
+ /* IPv6 destination address. */
+ uint32_t dest_ip_addr[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_encap_data_vxlan (size:576b/72B) */
+struct hwrm_cfa_encap_data_vxlan {
+ /* Source MAC address. */
+ uint8_t src_mac_addr[6];
+ /* reserved. */
+ uint16_t unused_0;
+ /* Destination MAC address. */
+ uint8_t dst_mac_addr[6];
+ /* Number of VLAN tags. */
+ uint8_t num_vlan_tags;
+ /* reserved. */
+ uint8_t unused_1;
+ /* Outer VLAN TPID. */
+ uint16_t ovlan_tpid;
+ /* Outer VLAN TCI. */
+ uint16_t ovlan_tci;
+ /* Inner VLAN TPID. */
+ uint16_t ivlan_tpid;
+ /* Inner VLAN TCI. */
+ uint16_t ivlan_tci;
+ /* L3 header fields. */
+ uint32_t l3[10];
+ /* IP version mask. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf)
+ /* IP version 4. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4)
+ /* IP version 6. */
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6)
+ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \
+ HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6
+ /* UDP source port. */
+ uint16_t src_port;
+ /* UDP destination port. */
+ uint16_t dst_port;
+ /* VXLAN Network Identifier. */
+ uint32_t vni;
+} __attribute__((packed));
+/*******************************
+ * hwrm_cfa_encap_record_alloc *
+ *******************************/
-/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
-struct hwrm_cfa_em_flow_alloc_input {
+
+/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */
+struct hwrm_cfa_encap_record_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
*/
uint64_t resp_addr;
uint32_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates enabling of a byte counter for a given
- * flow.
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x1)
+ /* Encapsulation Type. */
+ uint8_t encap_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* VLAN */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \
+ UINT32_C(0x8)
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
+ HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE
+ uint8_t unused_0[3];
+ /* This value is encap data used for the given encap type. */
+ uint32_t encap_data[20];
+} __attribute__((packed));
+
+/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */
+struct hwrm_cfa_encap_record_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t encap_record_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
+ uint8_t valid;
+} __attribute__((packed));
+
+/******************************
+ * hwrm_cfa_encap_record_free *
+ ******************************/
+
+
+/* hwrm_cfa_encap_record_free_input (size:192b/24B) */
+struct hwrm_cfa_encap_record_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * Setting of this flag indicates enabling of a packet counter for a given
- * flow.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
- /* Setting of this flag indicates de-capsulation action for the given flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
- /* Setting of this flag indicates encapsulation action for the given flow. */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t encap_record_id;
+ uint8_t unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_encap_record_free_output (size:128b/16B) */
+struct hwrm_cfa_encap_record_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/********************************
+ * hwrm_cfa_ntuple_filter_alloc *
+ ********************************/
+
+
+/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
+struct hwrm_cfa_ntuple_filter_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* Setting of this flag indicates the applicability to the loopback path. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+ UINT32_C(0x1)
/*
* Setting of this flag indicates drop action. If this flag is not set,
* then it should be considered accept action.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
+ UINT32_C(0x2)
/*
* Setting of this flag indicates that a meter is expected to be attached
* to this flow. This hint can be used when choosing the action record
* format required for the flow.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
+ UINT32_C(0x4)
uint32_t enables;
/*
* This bit must be '1' for the l2_filter_id field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
UINT32_C(0x1)
/*
- * This bit must be '1' for the tunnel_type field to be
+ * This bit must be '1' for the ethertype field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
UINT32_C(0x2)
/*
- * This bit must be '1' for the tunnel_id field to be
+ * This bit must be '1' for the tunnel_type field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
UINT32_C(0x4)
/*
* This bit must be '1' for the src_macaddr field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
UINT32_C(0x8)
/*
- * This bit must be '1' for the dst_macaddr field to be
+ * This bit must be '1' for the ipaddr_type field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
UINT32_C(0x10)
/*
- * This bit must be '1' for the ovlan_vid field to be
+ * This bit must be '1' for the src_ipaddr field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
UINT32_C(0x20)
/*
- * This bit must be '1' for the ivlan_vid field to be
+ * This bit must be '1' for the src_ipaddr_mask field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
UINT32_C(0x40)
/*
- * This bit must be '1' for the ethertype field to be
+ * This bit must be '1' for the dst_ipaddr field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
UINT32_C(0x80)
/*
- * This bit must be '1' for the src_ipaddr field to be
+ * This bit must be '1' for the dst_ipaddr_mask field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
UINT32_C(0x100)
/*
- * This bit must be '1' for the dst_ipaddr field to be
+ * This bit must be '1' for the ip_protocol field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
UINT32_C(0x200)
/*
- * This bit must be '1' for the ipaddr_type field to be
+ * This bit must be '1' for the src_port field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
UINT32_C(0x400)
/*
- * This bit must be '1' for the ip_protocol field to be
+ * This bit must be '1' for the src_port_mask field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
UINT32_C(0x800)
/*
- * This bit must be '1' for the src_port field to be
+ * This bit must be '1' for the dst_port field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
UINT32_C(0x1000)
/*
- * This bit must be '1' for the dst_port field to be
+ * This bit must be '1' for the dst_port_mask field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
UINT32_C(0x2000)
/*
- * This bit must be '1' for the dst_id field to be
+ * This bit must be '1' for the pri_hint field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
UINT32_C(0x4000)
/*
- * This bit must be '1' for the mirror_vnic_id field to be
+ * This bit must be '1' for the ntuple_filter_id field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
UINT32_C(0x8000)
/*
- * This bit must be '1' for the encap_record_id field to be
+ * This bit must be '1' for the dst_id field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
UINT32_C(0x10000)
/*
- * This bit must be '1' for the meter_instance_id field to be
+ * This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ UINT32_C(0x40000)
/*
* This value identifies a set of CFA data structures used for an L2
* context.
*/
uint64_t l2_filter_id;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Non-tunnel */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ /*
+ * This value indicates the source MAC address in
+ * the Ethernet header.
+ */
+ uint8_t src_macaddr[6];
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
+ /*
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- UINT32_C(0x2)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ /* IPv4 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ /* IPv6 */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
+ UINT32_C(0x6)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
+ UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+ UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
+ UINT32_C(0x11)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint16_t dst_id;
+ /*
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint16_t mirror_vnic_id;
+ /*
+ * This value indicates the tunnel type for this filter.
+ * If this field is not specified, then the filter shall
+ * apply to both non-tunneled and tunneled packets.
+ * If this field conflicts with the tunnel_type specified
+ * in the l2_filter_id, then the HWRM shall return an
+ * error for this command.
+ */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
UINT32_C(0x7)
/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
/* Any tunneled traffic */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ /*
+ * This hint is provided to help in placing
+ * the filter in the filter table.
+ */
+ uint8_t pri_hint;
+ /* No preference */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
+ UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
+ UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
+ UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
+ UINT32_C(0x4)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
+ /*
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr[4];
+ /*
+ * The value of source IP address mask to be used in
+ * filtering.
+ * For IPv4, first four bytes represent the IP address mask.
+ */
+ uint32_t src_ipaddr_mask[4];
+ /*
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4];
+ /*
+ * The value of destination IP address mask to be used in
+ * filtering.
+ * For IPv4, first four bytes represent the IP address mask.
+ */
+ uint32_t dst_ipaddr_mask[4];
+ /*
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port;
+ /*
+ * The value of source port mask to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port_mask;
+ /*
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port;
+ /*
+ * The value of destination port mask to be used in
+ * filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port_mask;
+ /*
+ * This is the ID of the filter that goes along with
+ * the pri_hint.
+ */
+ uint64_t ntuple_filter_id_hint;
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
+ /*
+ * This is the ID of the flow associated with this
+ * filter.
+ * This value shall be used to match and associate the
+ * flow identifier returned in completion records.
+ * A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint32_t flow_id;
uint8_t unused_0[3];
/*
- * Tunnel identifier.
- * Virtual Network Identifier (VNI). Only valid with
- * tunnel_types VXLAN, NVGRE, and Geneve.
- * Only lower 24-bits of VNI field are used
- * in setting up the filter.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint32_t tunnel_id;
+ uint8_t valid;
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
+struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
/*
- * This value indicates the source MAC address in
- * the Ethernet header.
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
*/
- uint8_t src_macaddr[6];
- /* The meter instance to attach to the flow. */
- uint16_t meter_instance_id;
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /* Unable to complete operation due to conflict with Rx Mask VLAN */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
+ UINT32_C(0x1)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_ntuple_filter_free *
+ *******************************/
+
+
+/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/******************************
+ * hwrm_cfa_ntuple_filter_cfg *
+ ******************************/
+
+
+/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
+struct hwrm_cfa_ntuple_filter_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the new_dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the new_meter_instance_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+ UINT32_C(0x4)
+ uint8_t unused_0[4];
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t ntuple_filter_id;
+ /*
+ * If set, this value shall represent the new
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and new network port id of the destination port for
+ * the TX path.
+ */
+ uint32_t new_dst_id;
+ /*
+ * New Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint32_t new_mirror_vnic_id;
+ /*
+ * New meter to attach to the flow. Specifying the
+ * invalid instance ID is used to remove any existing
+ * meter from the flow.
+ */
+ uint16_t new_meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
+ uint8_t unused_1[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**************************
+ * hwrm_cfa_em_flow_alloc *
+ **************************/
+
+
+/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
+struct hwrm_cfa_em_flow_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates enabling of a byte counter for a given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates enabling of a packet counter for a given
+ * flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
+ /* Setting of this flag indicates de-capsulation action for the given flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
+ /* Setting of this flag indicates encapsulation action for the given flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
+ /*
+ * Setting of this flag indicates that a meter is expected to be attached
+ * to this flow. This hint can be used when choosing the action record
+ * format required for the flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the l2_filter_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the tunnel_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the src_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the ovlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the ivlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the ethertype field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the src_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the dst_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the ipaddr_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the ip_protocol field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the src_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the dst_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the encap_record_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the meter_instance_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
+ UINT32_C(0x20000)
+ /*
+ * This value identifies a set of CFA data structures used for an L2
+ * context.
+ */
+ uint64_t l2_filter_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0[3];
+ /*
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
+ */
+ uint32_t tunnel_id;
+ /*
+ * This value indicates the source MAC address in
+ * the Ethernet header.
+ */
+ uint8_t src_macaddr[6];
+ /* The meter instance to attach to the flow. */
+ uint16_t meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
+ /*
+ * This value indicates the destination MAC address in
+ * the Ethernet header.
+ */
+ uint8_t dst_macaddr[6];
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ivlan_vid;
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
+ /*
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
+ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
+ uint8_t unused_1[2];
+ /*
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr[4];
+ /*
+ * big_endian = True
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4];
+ /*
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port;
+ /*
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint16_t dst_id;
+ /*
+ * Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint16_t mirror_vnic_id;
+ /* Logical ID of the encapsulation record. */
+ uint32_t encap_record_id;
+ uint8_t unused_2[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
+struct hwrm_cfa_em_flow_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t em_filter_id;
+ /*
+ * This is the ID of the flow associated with this
+ * filter.
+ * This value shall be used to match and associate the
+ * flow identifier returned in completion records.
+ * A value of 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint32_t flow_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*************************
+ * hwrm_cfa_em_flow_free *
+ *************************/
+
+
+/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
+struct hwrm_cfa_em_flow_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t em_filter_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
+struct hwrm_cfa_em_flow_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/************************
+ * hwrm_cfa_em_flow_cfg *
+ ************************/
+
+
+/* hwrm_cfa_em_flow_cfg_input (size:384b/48B) */
+struct hwrm_cfa_em_flow_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the new_dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the new_meter_instance_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+ UINT32_C(0x4)
+ uint8_t unused_0[4];
+ /* This value is an opaque id into CFA data structures. */
+ uint64_t em_filter_id;
+ /*
+ * If set, this value shall represent the new
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path and network port id of the destination port for
+ * the TX path.
+ */
+ uint32_t new_dst_id;
+ /*
+ * New Logical VNIC ID of the VNIC where traffic is
+ * mirrored.
+ */
+ uint32_t new_mirror_vnic_id;
+ /*
+ * New meter to attach to the flow. Specifying the
+ * invalid instance ID is used to remove any existing
+ * meter from the flow.
+ */
+ uint16_t new_meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
+ uint8_t unused_1[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_em_flow_cfg_output (size:128b/16B) */
+struct hwrm_cfa_em_flow_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/********************************
+ * hwrm_cfa_meter_profile_alloc *
+ ********************************/
+
+
+/* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */
+struct hwrm_cfa_meter_profile_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX
+ /* The meter algorithm type. */
+ uint8_t meter_type;
+ /* RFC 2697 (srTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \
+ UINT32_C(0x0)
+ /* RFC 2698 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \
+ UINT32_C(0x1)
+ /* RFC 4115 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \
+ UINT32_C(0x2)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint16_t reserved1;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved2;
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t commit_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
+ /* A meter burst size specified in bytes. */
+ uint32_t commit_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t excess_peak_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
+ /* A meter burst size specified in bytes. */
+ uint32_t excess_peak_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_meter_profile_free *
+ *******************************/
+
+
+/* hwrm_cfa_meter_profile_free_input (size:192b/24B) */
+struct hwrm_cfa_meter_profile_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_1[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/******************************
+ * hwrm_cfa_meter_profile_cfg *
+ ******************************/
+
+
+/* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */
+struct hwrm_cfa_meter_profile_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX
+ /* The meter algorithm type. */
+ uint8_t meter_type;
+ /* RFC 2697 (srTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \
+ UINT32_C(0x0)
+ /* RFC 2698 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \
+ UINT32_C(0x1)
+ /* RFC 4115 (trTCM) */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \
+ UINT32_C(0x2)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint32_t reserved;
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t commit_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
+ /* A meter burst size specified in bytes. */
+ uint32_t commit_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
+ /* A meter rate specified in bytes-per-second. */
+ uint32_t excess_peak_rate;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
+ /* A meter burst size specified in bytes. */
+ uint32_t excess_peak_burst;
+ /* The bandwidth value. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
+ 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */
+struct hwrm_cfa_meter_profile_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*********************************
+ * hwrm_cfa_meter_instance_alloc *
+ *********************************/
+
+
+/* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \
+ UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter profile in CFA. */
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID
+ uint8_t unused_1[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value identifies a meter instance in CFA. */
+ uint16_t meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/********************************
+ * hwrm_cfa_meter_instance_free *
+ ********************************/
+
+
+/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter instance in CFA. */
+ uint16_t meter_instance_id;
+ /*
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
+ uint8_t unused_1[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_decap_filter_alloc *
+ *******************************/
+
+
+/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
+struct hwrm_cfa_decap_filter_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* ovs_tunnel is 1 b */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
+ UINT32_C(0x1)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the tunnel_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the src_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the dst_macaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the ovlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the ivlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the t_ovlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the t_ivlan_vid field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the ethertype field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the src_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the dst_ipaddr field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the ipaddr_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the ip_protocol field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the src_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
+ UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the dst_port field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
+ UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the dst_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+ UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
+ /*
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI). Only valid with
+ * tunnel_types VXLAN, NVGRE, and Geneve.
+ * Only lower 24-bits of VNI field are used
+ * in setting up the filter.
+ */
+ uint32_t tunnel_id;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused_0;
+ uint16_t unused_1;
+ /*
+ * This value indicates the source MAC address in
+ * the Ethernet header.
+ */
+ uint8_t src_macaddr[6];
+ uint8_t unused_2[2];
+ /*
+ * This value indicates the destination MAC address in
+ * the Ethernet header.
+ */
+ uint8_t dst_macaddr[6];
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the Ethernet header.
+ */
+ uint16_t ivlan_vid;
+ /*
+ * This value indicates the VLAN ID of the outer VLAN tag
+ * in the tunnel Ethernet header.
+ */
+ uint16_t t_ovlan_vid;
+ /*
+ * This value indicates the VLAN ID of the inner VLAN tag
+ * in the tunnel Ethernet header.
+ */
+ uint16_t t_ivlan_vid;
+ /* This value indicates the ethertype in the Ethernet header. */
+ uint16_t ethertype;
+ /*
+ * This value indicates the type of IP address.
+ * 4 - IPv4
+ * 6 - IPv6
+ * All others are invalid.
+ */
+ uint8_t ip_addr_type;
+ /* invalid */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
+ UINT32_C(0x0)
+ /* IPv4 */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
+ UINT32_C(0x4)
+ /* IPv6 */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
+ UINT32_C(0x6)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ /*
+ * The value of protocol filed in IP header.
+ * Applies to UDP and TCP traffic.
+ * 6 - TCP
+ * 17 - UDP
+ */
+ uint8_t ip_protocol;
+ /* invalid */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
+ UINT32_C(0x0)
+ /* TCP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+ UINT32_C(0x6)
+ /* UDP */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
+ UINT32_C(0x11)
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
+ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+ uint16_t unused_3;
+ uint32_t unused_4;
+ /*
+ * The value of source IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t src_ipaddr[4];
+ /*
+ * The value of destination IP address to be used in filtering.
+ * For IPv4, first four bytes represent the IP address.
+ */
+ uint32_t dst_ipaddr[4];
+ /*
+ * The value of source port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t src_port;
+ /*
+ * The value of destination port to be used in filtering.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t dst_port;
+ /*
+ * If set, this value shall represent the
+ * Logical VNIC ID of the destination VNIC for the RX
+ * path.
+ */
+ uint16_t dst_id;
+ /*
+ * If set, this value shall represent the L2 context that matches the L2
+ * information of the decap filter.
+ */
+ uint16_t l2_ctxt_ref_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */
+struct hwrm_cfa_decap_filter_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t decap_filter_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/******************************
+ * hwrm_cfa_decap_filter_free *
+ ******************************/
+
+
+/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_decap_filter_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* This value is an opaque id into CFA data structures. */
+ uint32_t decap_filter_id;
+ uint8_t unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_decap_filter_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_cfa_flow_alloc *
+ ***********************/
+
+
+/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */
+struct hwrm_cfa_flow_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint16_t flags;
+ /* tunnel is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL UINT32_C(0x1)
+ /* num_vlan is 2 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK UINT32_C(0x6)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1
+ /* no tags */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \
+ (UINT32_C(0x0) << 1)
+ /* 1 tag */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \
+ (UINT32_C(0x1) << 1)
+ /* 2 tags */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \
+ (UINT32_C(0x2) << 1)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \
+ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO
+ /* Enumeration denoting the Flow Type. */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK UINT32_C(0x38)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3
+ /* L2 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \
+ (UINT32_C(0x0) << 3)
+ /* IPV4 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \
+ (UINT32_C(0x1) << 3)
+ /* IPV6 flow */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \
+ (UINT32_C(0x2) << 3)
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \
+ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6
+ /*
+ * Tx Flow: vf fid.
+ * Rx Flow: pf fid.
+ */
+ uint16_t src_fid;
+ /* Tunnel handle valid when tunnel flag is set. */
+ uint32_t tunnel_handle;
+ uint16_t action_flags;
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \
+ UINT32_C(0x1)
+ /* recycle is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \
+ UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is not set,
+ * then it should be considered accept action.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \
+ UINT32_C(0x4)
+ /* meter is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \
+ UINT32_C(0x8)
+ /* tunnel is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \
+ UINT32_C(0x10)
+ /* nat_src is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \
+ UINT32_C(0x20)
+ /* nat_dest is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \
+ UINT32_C(0x40)
+ /* nat_ipv4_address is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \
+ UINT32_C(0x80)
+ /* l2_header_rewrite is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \
+ UINT32_C(0x100)
+ /* ttl_decrement is 1 b */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \
+ UINT32_C(0x200)
+ /*
+ * Tx Flow: pf or vf fid.
+ * Rx Flow: vf fid.
+ */
+ uint16_t dst_fid;
+ /* VLAN tpid, valid when push_vlan flag is set. */
+ uint16_t l2_rewrite_vlan_tpid;
+ /* VLAN tci, valid when push_vlan flag is set. */
+ uint16_t l2_rewrite_vlan_tci;
+ /* Meter id, valid when meter flag is set. */
+ uint16_t act_meter_id;
+ /* Flow with the same l2 context tcam key. */
+ uint16_t ref_flow_handle;
+ /* This value sets the match value for the ethertype. */
+ uint16_t ethertype;
+ /* valid when num tags is 1 or 2. */
+ uint16_t outer_vlan_tci;
+ /* This value sets the match value for the Destination MAC address. */
+ uint16_t dmac[3];
+ /* valid when num tags is 2. */
+ uint16_t inner_vlan_tci;
+ /* This value sets the match value for the Source MAC address. */
+ uint16_t smac[3];
+ /* The bit length of destination IP address mask. */
+ uint8_t ip_dst_mask_len;
+ /* The bit length of source IP address mask. */
+ uint8_t ip_src_mask_len;
+ /* The value of destination IPv4/IPv6 address. */
+ uint32_t ip_dst[4];
+ /* The source IPv4/IPv6 address. */
+ uint32_t ip_src[4];
+ /*
+ * The value of source port.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t l4_src_port;
+ /*
+ * The value of source port mask.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t l4_src_port_mask;
+ /*
+ * The value of destination port.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t l4_dst_port;
+ /*
+ * The value of destination port mask.
+ * Applies to UDP and TCP traffic.
+ */
+ uint16_t l4_dst_port_mask;
+ /*
+ * NAT IPv4/6 address based on address type flag.
+ * 0 values are ignored.
+ */
+ uint32_t nat_ip_address[4];
+ /* L2 header re-write Destination MAC address. */
+ uint16_t l2_rewrite_dmac[3];
+ /*
+ * The NAT source/destination port based on direction flag.
+ * Applies to UDP and TCP traffic.
+ * 0 values are ignored.
+ */
+ uint16_t nat_port;
+ /* L2 header re-write Source MAC address. */
+ uint16_t l2_rewrite_smac[3];
+ /* The value of ip protocol. */
+ uint8_t ip_proto;
+ uint8_t unused_0;
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_alloc_output (size:128b/16B) */
+struct hwrm_cfa_flow_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Flow record index. */
+ uint16_t flow_handle;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_cfa_flow_free *
+ **********************/
+
+
+/* hwrm_cfa_flow_free_input (size:192b/24B) */
+struct hwrm_cfa_flow_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Flow record index. */
+ uint16_t flow_handle;
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_free_output (size:256b/32B) */
+struct hwrm_cfa_flow_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* packet is 64 b */
+ uint64_t packet;
+ /* byte is 64 b */
+ uint64_t byte;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_cfa_flow_info *
+ **********************/
+
+
+/* hwrm_cfa_flow_info_input (size:192b/24B) */
+struct hwrm_cfa_flow_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Flow record index. */
+ uint16_t flow_handle;
+ /* Max flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \
+ UINT32_C(0xfff)
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT 0
+ /* CNP flow handle */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \
+ UINT32_C(0x1000)
+ /* Direction rx = 1 */
+ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \
+ UINT32_C(0x8000)
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_info_output (size:448b/56B) */
+struct hwrm_cfa_flow_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* flags is 8 b */
+ uint8_t flags;
+ /* profile is 8 b */
+ uint8_t profile;
+ /* src_fid is 16 b */
+ uint16_t src_fid;
+ /* dst_fid is 16 b */
+ uint16_t dst_fid;
+ /* l2_ctxt_id is 16 b */
+ uint16_t l2_ctxt_id;
+ /* em_info is 64 b */
+ uint64_t em_info;
+ /* tcam_info is 64 b */
+ uint64_t tcam_info;
+ /* vfp_tcam_info is 64 b */
+ uint64_t vfp_tcam_info;
+ /* ar_id is 16 b */
+ uint16_t ar_id;
+ /* flow_handle is 16 b */
+ uint16_t flow_handle;
+ /* tunnel_handle is 32 b */
+ uint32_t tunnel_handle;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_cfa_flow_flush *
+ ***********************/
+
+
+/* hwrm_cfa_flow_flush_input (size:192b/24B) */
+struct hwrm_cfa_flow_flush_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ uint8_t unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_flush_output (size:128b/16B) */
+struct hwrm_cfa_flow_flush_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_cfa_flow_stats *
+ ***********************/
+
+
+/* hwrm_cfa_flow_stats_input (size:320b/40B) */
+struct hwrm_cfa_flow_stats_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Flow handle. */
+ uint16_t num_flows;
+ /* Flow handle. */
+ uint16_t flow_handle_0;
+ /* Flow handle. */
+ uint16_t flow_handle_1;
+ /* Flow handle. */
+ uint16_t flow_handle_2;
+ /* Flow handle. */
+ uint16_t flow_handle_3;
+ /* Flow handle. */
+ uint16_t flow_handle_4;
+ /* Flow handle. */
+ uint16_t flow_handle_5;
+ /* Flow handle. */
+ uint16_t flow_handle_6;
+ /* Flow handle. */
+ uint16_t flow_handle_7;
+ /* Flow handle. */
+ uint16_t flow_handle_8;
+ /* Flow handle. */
+ uint16_t flow_handle_9;
+ uint8_t unused_0[2];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_stats_output (size:1408b/176B) */
+struct hwrm_cfa_flow_stats_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* packet_0 is 64 b */
+ uint64_t packet_0;
+ /* packet_1 is 64 b */
+ uint64_t packet_1;
+ /* packet_2 is 64 b */
+ uint64_t packet_2;
+ /* packet_3 is 64 b */
+ uint64_t packet_3;
+ /* packet_4 is 64 b */
+ uint64_t packet_4;
+ /* packet_5 is 64 b */
+ uint64_t packet_5;
+ /* packet_6 is 64 b */
+ uint64_t packet_6;
+ /* packet_7 is 64 b */
+ uint64_t packet_7;
+ /* packet_8 is 64 b */
+ uint64_t packet_8;
+ /* packet_9 is 64 b */
+ uint64_t packet_9;
+ /* byte_0 is 64 b */
+ uint64_t byte_0;
+ /* byte_1 is 64 b */
+ uint64_t byte_1;
+ /* byte_2 is 64 b */
+ uint64_t byte_2;
+ /* byte_3 is 64 b */
+ uint64_t byte_3;
+ /* byte_4 is 64 b */
+ uint64_t byte_4;
+ /* byte_5 is 64 b */
+ uint64_t byte_5;
+ /* byte_6 is 64 b */
+ uint64_t byte_6;
+ /* byte_7 is 64 b */
+ uint64_t byte_7;
+ /* byte_8 is 64 b */
+ uint64_t byte_8;
+ /* byte_9 is 64 b */
+ uint64_t byte_9;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**************************
+ * hwrm_cfa_vf_pair_alloc *
+ **************************/
+
+
+/* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ uint8_t unused_0[4];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*************************
+ * hwrm_cfa_vf_pair_free *
+ *************************/
+
+
+/* hwrm_cfa_vf_pair_free_input (size:384b/48B) */
+struct hwrm_cfa_vf_pair_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_vf_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*************************
+ * hwrm_cfa_vf_pair_info *
+ *************************/
+
+
+/* hwrm_cfa_vf_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* vf pair table index. */
+ uint16_t vf_pair_index;
+ uint8_t unused_0[2];
+ /* VF Pair name (32 byte string). */
+ char vf_pair_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_vf_pair_info_output (size:512b/64B) */
+struct hwrm_cfa_vf_pair_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* vf pair table index. */
+ uint16_t next_vf_pair_index;
+ /* vf pair member a's vf_fid. */
+ uint16_t vf_a_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* vf pair member b's vf_fid. */
+ uint16_t vf_b_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* vf pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ uint8_t unused_0[5];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_cfa_pair_alloc *
+ ***********************/
+
+
+/* hwrm_cfa_pair_alloc_input (size:576b/72B) */
+struct hwrm_cfa_pair_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
+ uint16_t cmpl_ring;
/*
- * This value indicates the destination MAC address in
- * the Ethernet header.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint8_t dst_macaddr[6];
+ uint16_t seq_id;
/*
- * This value indicates the VLAN ID of the outer VLAN tag
- * in the Ethernet header.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
*/
- uint16_t ovlan_vid;
+ uint16_t target_id;
/*
- * This value indicates the VLAN ID of the inner VLAN tag
- * in the Ethernet header.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint16_t ivlan_vid;
- /* This value indicates the ethertype in the Ethernet header. */
- uint16_t ethertype;
+ uint64_t resp_addr;
+ /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair, 5-rep2fn_mod). */
+ uint8_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ /* Modify exiting rep2fn pair and move pair to new PF. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5)
+ /* Modify exiting rep2fn pairs paired with same PF and move pairs to new PF. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6)
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL
+ uint8_t unused_0;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical Host (0xff-local host). */
+ uint8_t host_b_id;
+ /* Logical PF (0xff-PF for command channel). */
+ uint8_t pf_b_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ /* Loopback port (0xff-internal loopback), valid for mode-3. */
+ uint8_t port_id;
+ /* Priority used for encap of loopback packets valid for mode-3. */
+ uint8_t pri;
+ /* New PF for rep2fn modify, valid for mode 5. */
+ uint16_t new_pf_fid;
+ uint32_t enables;
/*
- * This value indicates the type of IP address.
- * 4 - IPv4
- * 6 - IPv6
- * All others are invalid.
+ * This bit must be '1' for the q_ab field to be
+ * configured.
*/
- uint8_t ip_addr_type;
- /* invalid */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
- /* IPv4 */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
- /* IPv6 */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1)
/*
- * The value of protocol filed in IP header.
- * Applies to UDP and TCP traffic.
- * 6 - TCP
- * 17 - UDP
+ * This bit must be '1' for the q_ba field to be
+ * configured.
*/
- uint8_t ip_protocol;
- /* invalid */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
- /* TCP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
- /* UDP */
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
- #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
- HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
- uint8_t unused_1[2];
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2)
/*
- * The value of source IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * This bit must be '1' for the fc_ab field to be
+ * configured.
*/
- uint32_t src_ipaddr[4];
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4)
/*
- * big_endian = True
- * The value of destination IP address to be used in filtering.
- * For IPv4, first four bytes represent the IP address.
+ * This bit must be '1' for the fc_ba field to be
+ * configured.
*/
- uint32_t dst_ipaddr[4];
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8)
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
/*
- * The value of source port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The q_ab value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the A to B direction of
+ * the interface pair. The default value is 0.
*/
- uint16_t src_port;
+ uint8_t q_ab;
/*
- * The value of destination port to be used in filtering.
- * Applies to UDP and TCP traffic.
+ * The q_ba value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the B to A direction of
+ * the interface pair. The default value is 1.
*/
- uint16_t dst_port;
+ uint8_t q_ba;
/*
- * If set, this value shall represent the
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the A to B direction. The default value is 0, meaning that
+ * packets will be dropped when the B-side RX rings are full.
*/
- uint16_t dst_id;
+ uint8_t fc_ab;
/*
- * Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the B to A direction. The default value is 1, meaning that
+ * the RX CoS queue will be flow controlled when the A-side RX rings
+ * are full.
*/
- uint16_t mirror_vnic_id;
- /* Logical ID of the encapsulation record. */
- uint32_t encap_record_id;
- uint8_t unused_2[4];
+ uint8_t fc_ba;
+ uint8_t unused_1[4];
} __attribute__((packed));
-/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
-struct hwrm_cfa_em_flow_alloc_output {
+/* hwrm_cfa_pair_alloc_output (size:192b/24B) */
+struct hwrm_cfa_pair_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This value is an opaque id into CFA data structures. */
- uint64_t em_filter_id;
- /*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
- */
- uint32_t flow_id;
- uint8_t unused_0[3];
+ /* Only valid for modes 1 and 2. */
+ uint16_t rx_cfa_code_a;
+ /* Only valid for modes 1 and 2. */
+ uint16_t tx_cfa_action_a;
+ /* Only valid for mode 2. */
+ uint16_t rx_cfa_code_b;
+ /* Only valid for mode 2. */
+ uint16_t tx_cfa_action_b;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __attribute__((packed));
-/*************************
- * hwrm_cfa_em_flow_free *
- *************************/
+/**********************
+ * hwrm_cfa_pair_free *
+ **********************/
-/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
-struct hwrm_cfa_em_flow_free_input {
+/* hwrm_cfa_pair_free_input (size:384b/48B) */
+struct hwrm_cfa_pair_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This value is an opaque id into CFA data structures. */
- uint64_t em_filter_id;
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
} __attribute__((packed));
-/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
-struct hwrm_cfa_em_flow_free_output {
+/* hwrm_cfa_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_pair_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint8_t valid;
} __attribute__((packed));
-/************************
- * hwrm_cfa_em_flow_cfg *
- ************************/
+/**********************
+ * hwrm_cfa_pair_info *
+ **********************/
-/* hwrm_cfa_em_flow_cfg_input (size:384b/48B) */
-struct hwrm_cfa_em_flow_cfg_input {
+/* hwrm_cfa_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_pair_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* If this flag is set, lookup by PF id and VF id. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
+ /* Pair table index. */
+ uint16_t pair_index;
+ /* Pair pf index. */
+ uint8_t pair_pfid;
+ /* Pair vf index. */
+ uint8_t pair_vfid;
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_pair_info_output (size:576b/72B) */
+struct hwrm_cfa_pair_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Pair table index. */
+ uint16_t next_pair_index;
+ /* Pair member a's fid. */
+ uint16_t a_fid;
+ /* Logical host number. */
+ uint8_t host_a_index;
+ /* Logical PF number. */
+ uint8_t pf_a_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_a;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_a;
+ /* Pair member b's fid. */
+ uint16_t b_fid;
+ /* Logical host number. */
+ uint8_t host_b_index;
+ /* Logical PF number. */
+ uint8_t pf_b_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_b;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_b;
+ /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
+ uint8_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
+ /* Pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_0[7];
/*
- * This bit must be '1' for the new_dst_id field to be
- * configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID \
- UINT32_C(0x1)
+ uint8_t valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_cfa_vfr_alloc *
+ **********************/
+
+
+/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vfr_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * This bit must be '1' for the new_mirror_vnic_id field to be
- * configured.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
- UINT32_C(0x2)
+ uint16_t cmpl_ring;
/*
- * This bit must be '1' for the new_meter_instance_id field to be
- * configured.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
- UINT32_C(0x4)
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint16_t reserved;
uint8_t unused_0[4];
- /* This value is an opaque id into CFA data structures. */
- uint64_t em_filter_id;
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vfr_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action;
+ uint8_t unused_0[3];
/*
- * If set, this value shall represent the new
- * Logical VNIC ID of the destination VNIC for the RX
- * path and network port id of the destination port for
- * the TX path.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint32_t new_dst_id;
+ uint8_t valid;
+} __attribute__((packed));
+
+/*********************
+ * hwrm_cfa_vfr_free *
+ *********************/
+
+
+/* hwrm_cfa_vfr_free_input (size:384b/48B) */
+struct hwrm_cfa_vfr_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * New Logical VNIC ID of the VNIC where traffic is
- * mirrored.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint32_t new_mirror_vnic_id;
+ uint16_t cmpl_ring;
/*
- * New meter to attach to the flow. Specifying the
- * invalid instance ID is used to remove any existing
- * meter from the flow.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t new_meter_instance_id;
+ uint16_t seq_id;
/*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
*/
- #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
- UINT32_C(0xffff)
- #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
- HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
- uint8_t unused_1[6];
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
} __attribute__((packed));
-/* hwrm_cfa_em_flow_cfg_output (size:128b/16B) */
-struct hwrm_cfa_em_flow_cfg_output {
+/* hwrm_cfa_vfr_free_output (size:128b/16B) */
+struct hwrm_cfa_vfr_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
git.droids-corp.org / dpdk.git / commitdiff