doc: update enic guide and features

Documentation updates including for 1400 series VIC adapters.

Remove VLAN filter from the features file as the driver does not
support that API. Hardware does support VLAN filtering, but it is not
controlled through the driver.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index b8cfac4..3ef635f 100644 (file)
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -232,7 +232,7 @@ Generic Flow API is supported. The baseline support is:
   - Actions: queue and void
   - Selectors: 'is'
 
-- **1300 series VICS with advanced filters disabled**
+- **1300 and later series VICS with advanced filters disabled**
 
   With advanced filters disabled, an IPv4 or IPv6 item must be specified
   in the pattern.
@@ -243,7 +243,7 @@ Generic Flow API is supported. The baseline support is:
   - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
   - In total, up to 64 bytes of mask is allowed across all headers
 
-- **1300 series VICS with advanced filters enabled**
+- **1300 and later series VICS with advanced filters enabled**
 
   - Attributes: ingress
   - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp
@@ -313,10 +313,20 @@ Limitations
 - **Statistics**
 
   - ``rx_good_bytes`` (ibytes) always includes VLAN header (4B) and CRC bytes (4B).
+    This behavior applies to 1300 and older series VIC adapters.
+    1400 series VICs do not count CRC bytes, and count VLAN header only when VLAN
+    stripping is disabled.
   - When the NIC drops a packet because the Rx queue has no free buffers,
     ``rx_good_bytes`` still increments by 4B if the packet is not VLAN tagged or
     VLAN stripping is disabled, or by 8B if the packet is VLAN tagged and stripping
     is enabled.
+    This behavior applies to 1300 and older series VIC adapters. 1400 series VICs
+    do not increment this byte counter when packets are dropped.
+
+- **RSS Hashing**
+
+  - Hardware enables and disables UDP and TCP RSS hashing together. The driver
+    cannot control UDP and TCP hashing individually.
 
 How to build the suite
 ----------------------
@@ -335,17 +345,9 @@ Supported Cisco VIC adapters
 
 ENIC PMD supports all recent generations of Cisco VIC adapters including:
 
-- VIC 1280
-- VIC 1240
-- VIC 1225
-- VIC 1285
-- VIC 1225T
-- VIC 1227
-- VIC 1227T
-- VIC 1380
-- VIC 1340
-- VIC 1385
-- VIC 1387
+- VIC 1200 series
+- VIC 1300 series
+- VIC 1400 series
 
 Supported Operating Systems
 ---------------------------

diff --git a/doc/guides/nics/features/enic.ini b/doc/guides/nics/features/enic.ini
index ea171a4..99d3770 100644 (file)
--- a/doc/guides/nics/features/enic.ini
+++ b/doc/guides/nics/features/enic.ini
@@ -19,7 +19,6 @@ RSS hash             = Y
 RSS key update       = Y
 RSS reta update      = Y
 SR-IOV               = Y
-VLAN filter          = Y
 CRC offload          = Y
 VLAN offload         = Y
 Flow director        = Y