features available and required by the datapath implementation.
**efx** chooses libefx-based datapath which supports VLAN insertion
(full-feature firmware variant only), TSO and multi-segment mbufs.
+ Mbuf segments may come from different mempools, and mbuf reference
+ counters are treated responsibly.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which is
more efficient than libefx-based but has no VLAN insertion and TSO
support yet.
+ Mbuf segments may come from different mempools, and mbuf reference
+ counters are treated responsibly.
**ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which
is even more faster then **ef10** but does not support multi-segment
- mbufs.
+ mbufs, disallows multiple mempools and neglects mbuf reference counters.
- ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
#define SFC_DP_TX_FEAT_TSO 0x2
#define SFC_DP_TX_FEAT_MULTI_SEG 0x4
#define SFC_DP_TX_FEAT_MULTI_PROCESS 0x8
+#define SFC_DP_TX_FEAT_MULTI_POOL 0x10
+#define SFC_DP_TX_FEAT_REFCNT 0x20
sfc_dp_tx_qcreate_t *qcreate;
sfc_dp_tx_qdestroy_t *qdestroy;
sfc_dp_tx_qstart_t *qstart;
pending += sfc_ef10_tx_process_events(txq);
if (pending != completed) {
+ struct rte_mbuf *bulk[SFC_TX_REAP_BULK_SIZE];
+ unsigned int nb = 0;
+
do {
struct sfc_ef10_tx_sw_desc *txd;
txd = &txq->sw_ring[completed & ptr_mask];
- rte_pktmbuf_free_seg(txd->mbuf);
+ if (nb == RTE_DIM(bulk)) {
+ rte_mempool_put_bulk(bulk[0]->pool,
+ (void *)bulk, nb);
+ nb = 0;
+ }
+
+ bulk[nb++] = txd->mbuf;
} while (++completed != pending);
+ rte_mempool_put_bulk(bulk[0]->pool, (void *)bulk, nb);
+
txq->completed = completed;
}
.hw_fw_caps = SFC_DP_HW_FW_CAP_EF10,
},
.features = SFC_DP_TX_FEAT_MULTI_SEG |
+ SFC_DP_TX_FEAT_MULTI_POOL |
+ SFC_DP_TX_FEAT_REFCNT |
SFC_DP_TX_FEAT_MULTI_PROCESS,
.qcreate = sfc_ef10_tx_qcreate,
.qdestroy = sfc_ef10_tx_qdestroy,
if (~sa->dp_tx->features & SFC_DP_TX_FEAT_MULTI_SEG)
dev_info->default_txconf.txq_flags |= ETH_TXQ_FLAGS_NOMULTSEGS;
+ if (~sa->dp_tx->features & SFC_DP_TX_FEAT_MULTI_POOL)
+ dev_info->default_txconf.txq_flags |= ETH_TXQ_FLAGS_NOMULTMEMP;
+
+ if (~sa->dp_tx->features & SFC_DP_TX_FEAT_REFCNT)
+ dev_info->default_txconf.txq_flags |= ETH_TXQ_FLAGS_NOREFCOUNT;
+
#if EFSYS_OPT_RX_SCALE
if (sa->rss_support != EFX_RX_SCALE_UNAVAILABLE) {
dev_info->reta_size = EFX_RSS_TBL_SIZE;
rc = EINVAL;
}
+ if (((flags & ETH_TXQ_FLAGS_NOMULTMEMP) == 0) &&
+ (~sa->dp_tx->features & SFC_DP_TX_FEAT_MULTI_POOL)) {
+ sfc_err(sa, "multi-mempool is not supported by %s datapath",
+ sa->dp_tx->dp.name);
+ rc = EINVAL;
+ }
+
+ if (((flags & ETH_TXQ_FLAGS_NOREFCOUNT) == 0) &&
+ (~sa->dp_tx->features & SFC_DP_TX_FEAT_REFCNT)) {
+ sfc_err(sa,
+ "mbuf reference counters are neglected by %s datapath",
+ sa->dp_tx->dp.name);
+ rc = EINVAL;
+ }
+
if ((flags & ETH_TXQ_FLAGS_NOVLANOFFL) == 0) {
if (!encp->enc_hw_tx_insert_vlan_enabled) {
sfc_err(sa, "VLAN offload is not supported");
},
.features = SFC_DP_TX_FEAT_VLAN_INSERT |
SFC_DP_TX_FEAT_TSO |
+ SFC_DP_TX_FEAT_MULTI_POOL |
+ SFC_DP_TX_FEAT_REFCNT |
SFC_DP_TX_FEAT_MULTI_SEG,
.qcreate = sfc_efx_tx_qcreate,
.qdestroy = sfc_efx_tx_qdestroy,