struct rte_eth_dev_info *dev_info);
static int nfp_net_init(struct rte_eth_dev *eth_dev);
static int nfp_pf_init(struct rte_pci_device *pci_dev);
+static int nfp_pf_secondary_init(struct rte_pci_device *pci_dev);
static int nfp_pci_uninit(struct rte_eth_dev *eth_dev);
static int nfp_init_phyports(struct nfp_pf_dev *pf_dev);
static int nfp_net_link_update(struct rte_eth_dev *dev, int wait_to_complete);
static int nfp_set_mac_addr(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr);
static int32_t nfp_cpp_bridge_service_func(void *args);
+static void nfp_register_cpp_service(struct nfp_cpp *cpp);
static int nfp_fw_setup(struct rte_pci_device *dev,
struct nfp_cpp *cpp,
struct nfp_eth_table *nfp_eth_table,
snprintf(port_name, sizeof(port_name), "%s_port%d",
pf_dev->pci_dev->device.name, i);
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
- eth_dev = rte_eth_dev_attach_secondary(port_name);
- if (!eth_dev) {
- RTE_LOG(ERR, EAL,
- "secondary process attach failed, "
- "ethdev doesn't exist");
- ret = -ENODEV;
- goto error;
- }
-
- eth_dev->process_private = pf_dev->cpp;
- goto nfp_net_init;
- }
-
/* Allocate a eth_dev for this phyport */
eth_dev = rte_eth_dev_allocate(port_name);
if (!eth_dev) {
hw->nfp_idx = nfp_eth_table->ports[i].index;
hw->is_phyport = true;
-nfp_net_init:
eth_dev->device = &pf_dev->pci_dev->device;
/* ctrl/tx/rx BAR mappings and remaining init happens in
return ret;
}
+static void nfp_register_cpp_service(struct nfp_cpp *cpp)
+{
+ uint32_t *cpp_service_id = NULL;
+ struct rte_service_spec service;
+
+ memset(&service, 0, sizeof(struct rte_service_spec));
+ snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
+ service.callback = nfp_cpp_bridge_service_func;
+ service.callback_userdata = (void *)cpp;
+
+ if (rte_service_component_register(&service,
+ cpp_service_id))
+ RTE_LOG(WARNING, PMD, "NFP CPP bridge service register() failed");
+ else
+ RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
+}
+
static int nfp_pf_init(struct rte_pci_device *pci_dev)
{
struct nfp_pf_dev *pf_dev = NULL;
struct nfp_hwinfo *hwinfo;
struct nfp_rtsym_table *sym_tbl;
struct nfp_eth_table *nfp_eth_table = NULL;
- struct rte_service_spec service;
- uint32_t *nfp_cpp_service_id = NULL;
char name[RTE_ETH_NAME_MAX_LEN];
int total_ports;
int ret = -ENODEV;
goto hwinfo_cleanup;
}
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- if (nfp_fw_setup(pci_dev, cpp, nfp_eth_table, hwinfo)) {
- PMD_INIT_LOG(ERR, "Error when uploading firmware");
- ret = -EIO;
- goto eth_table_cleanup;
- }
+ if (nfp_fw_setup(pci_dev, cpp, nfp_eth_table, hwinfo)) {
+ PMD_INIT_LOG(ERR, "Error when uploading firmware");
+ ret = -EIO;
+ goto eth_table_cleanup;
}
/* Now the symbol table should be there */
goto hwqueues_cleanup;
}
- /*
- * The rte_service needs to be created just once per PMD.
- * And the cpp handler needs to be linked to the service.
- * Secondary processes will be used for debugging DPDK apps
- * when requiring to use the CPP interface for accessing NFP
- * components. And the cpp handler for secondary processes is
- * available at this point.
- */
- memset(&service, 0, sizeof(struct rte_service_spec));
- snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
- service.callback = nfp_cpp_bridge_service_func;
- service.callback_userdata = (void *)cpp;
-
- if (rte_service_component_register(&service,
- nfp_cpp_service_id))
- RTE_LOG(ERR, PMD, "NFP CPP bridge service register() failed");
- else
- RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
+ /* register the CPP bridge service here for primary use */
+ nfp_register_cpp_service(pf_dev->cpp);
return 0;
return ret;
}
+/*
+ * When attaching to the NFP4000/6000 PF on a secondary process there
+ * is no need to initialize the PF again. Only minimal work is required
+ * here
+ */
+static int nfp_pf_secondary_init(struct rte_pci_device *pci_dev)
+{
+ struct nfp_cpp *cpp;
+ struct nfp_rtsym_table *sym_tbl;
+ int total_ports;
+ int i;
+ int err;
+
+ if (!pci_dev)
+ return -ENODEV;
+
+ /*
+ * When device bound to UIO, the device could be used, by mistake,
+ * by two DPDK apps, and the UIO driver does not avoid it. This
+ * could lead to a serious problem when configuring the NFP CPP
+ * interface. Here we avoid this telling to the CPP init code to
+ * use a lock file if UIO is being used.
+ */
+ if (pci_dev->kdrv == RTE_PCI_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(pci_dev, 0);
+ else
+ cpp = nfp_cpp_from_device_name(pci_dev, 1);
+
+ if (!cpp) {
+ PMD_INIT_LOG(ERR, "A CPP handle can not be obtained");
+ return -EIO;
+ }
+
+ /*
+ * We don't have access to the PF created in the primary process
+ * here so we have to read the number of ports from firmware
+ */
+ sym_tbl = nfp_rtsym_table_read(cpp);
+ if (!sym_tbl) {
+ PMD_INIT_LOG(ERR, "Something is wrong with the firmware"
+ " symbol table");
+ return -EIO;
+ }
+
+ total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
+
+ for (i = 0; i < total_ports; i++) {
+ struct rte_eth_dev *eth_dev;
+ char port_name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(port_name, sizeof(port_name), "%s_port%d",
+ pci_dev->device.name, i);
+
+ PMD_DRV_LOG(DEBUG, "Secondary attaching to port %s",
+ port_name);
+ eth_dev = rte_eth_dev_attach_secondary(port_name);
+ if (!eth_dev) {
+ RTE_LOG(ERR, EAL,
+ "secondary process attach failed, "
+ "ethdev doesn't exist");
+ return -ENODEV;
+ }
+ eth_dev->process_private = cpp;
+ eth_dev->dev_ops = &nfp_net_eth_dev_ops;
+ eth_dev->rx_queue_count = nfp_net_rx_queue_count;
+ eth_dev->rx_pkt_burst = &nfp_net_recv_pkts;
+ eth_dev->tx_pkt_burst = &nfp_net_xmit_pkts;
+ rte_eth_dev_probing_finish(eth_dev);
+ }
+
+ /* Register the CPP bridge service for the secondary too */
+ nfp_register_cpp_service(cpp);
+
+ return 0;
+}
+
static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *dev)
{
- return nfp_pf_init(dev);
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ return nfp_pf_init(dev);
+ else
+ return nfp_pf_secondary_init(dev);
}
static const struct rte_pci_id pci_id_nfp_pf_net_map[] = {
git.droids-corp.org / dpdk.git / commitdiff