net/octeontx2: support read clock

This patch implements read clock api whose purpose is to return
raw clock ticks. Using this API real time ticks spent in
processing a packet can be known:
    <read_clock val at any time> - mbuf->timestamp

Calling mbox for reading raw clock ticks in fastpath is very
expensive so its value is derived from time stamp counter(tsc)
using freq multiplier (ratio of raw clock ticks and tsc) and clock
delta (by how much tsc is lagging from raw clock value).

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

diff --git a/drivers/common/octeontx2/otx2_mbox.h b/drivers/common/octeontx2/otx2_mbox.h
index c0bb676..b2c59c8 100644 (file)
--- a/drivers/common/octeontx2/otx2_mbox.h
+++ b/drivers/common/octeontx2/otx2_mbox.h
@@ -1354,11 +1354,13 @@ struct ptp_req {
        struct mbox_msghdr hdr;
        uint8_t __otx2_io op;
        int64_t __otx2_io scaled_ppm;
+       uint8_t __otx2_io is_pmu;
 };
 
 struct ptp_rsp {
        struct mbox_msghdr hdr;
        uint64_t __otx2_io clk;
+       uint64_t __otx2_io tsc;
 };
 
 struct get_hw_cap_rsp {

diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 595c800..3fb7bd9 100644 (file)
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -3,7 +3,6 @@
  */
 
 #include <inttypes.h>
-#include <math.h>
 
 #include <rte_ethdev_pci.h>
 #include <rte_io.h>
@@ -521,6 +520,20 @@ otx2_nix_rx_queue_setup(struct rte_eth_dev *eth_dev, uint16_t rq,
 
        eth_dev->data->rx_queues[rq] = rxq;
        eth_dev->data->rx_queue_state[rq] = RTE_ETH_QUEUE_STATE_STOPPED;
+
+       /* Calculating delta and freq mult between PTP HI clock and tsc.
+        * These are needed in deriving raw clock value from tsc counter.
+        * read_clock eth op returns raw clock value.
+        */
+       if ((dev->rx_offloads & DEV_RX_OFFLOAD_TIMESTAMP) ||
+           otx2_ethdev_is_ptp_en(dev)) {
+               rc = otx2_nix_raw_clock_tsc_conv(dev);
+               if (rc) {
+                       otx2_err("Failed to calculate delta and freq mult");
+                       goto fail;
+               }
+       }
+
        return 0;
 
 free_rxq:
@@ -1649,6 +1662,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
        .vlan_pvid_set            = otx2_nix_vlan_pvid_set,
        .rx_queue_intr_enable     = otx2_nix_rx_queue_intr_enable,
        .rx_queue_intr_disable    = otx2_nix_rx_queue_intr_disable,
+       .read_clock               = otx2_nix_read_clock,
 };
 
 static inline int

diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
index 863d487..720386f 100644 (file)
--- a/drivers/net/octeontx2/otx2_ethdev.h
+++ b/drivers/net/octeontx2/otx2_ethdev.h
@@ -5,6 +5,7 @@
 #ifndef __OTX2_ETHDEV_H__
 #define __OTX2_ETHDEV_H__
 
+#include <math.h>
 #include <stdint.h>
 
 #include <rte_common.h>
@@ -300,6 +301,8 @@ struct otx2_eth_dev {
        struct rte_timecounter  systime_tc;
        struct rte_timecounter  rx_tstamp_tc;
        struct rte_timecounter  tx_tstamp_tc;
+       double clk_freq_mult;
+       uint64_t clk_delta;
 } __rte_cache_aligned;
 
 struct otx2_eth_txq {
@@ -527,5 +530,7 @@ int otx2_nix_timesync_write_time(struct rte_eth_dev *eth_dev,
 int otx2_nix_timesync_read_time(struct rte_eth_dev *eth_dev,
                                struct timespec *ts);
 int otx2_eth_dev_ptp_info_update(struct otx2_dev *dev, bool ptp_en);
+int otx2_nix_read_clock(struct rte_eth_dev *eth_dev, uint64_t *time);
+int otx2_nix_raw_clock_tsc_conv(struct otx2_eth_dev *dev);
 
 #endif /* __OTX2_ETHDEV_H__ */

diff --git a/drivers/net/octeontx2/otx2_ptp.c b/drivers/net/octeontx2/otx2_ptp.c
index 0186c62..52e5456 100644 (file)
--- a/drivers/net/octeontx2/otx2_ptp.c
+++ b/drivers/net/octeontx2/otx2_ptp.c
@@ -8,6 +8,81 @@
 
 #define PTP_FREQ_ADJUST (1 << 9)
 
+static int
+nix_read_raw_clock(struct otx2_eth_dev *dev, uint64_t *clock, uint64_t *tsc,
+                  uint8_t is_pmu)
+{
+       struct otx2_mbox *mbox = dev->mbox;
+       struct ptp_req *req;
+       struct ptp_rsp *rsp;
+       int rc;
+
+       req = otx2_mbox_alloc_msg_ptp_op(mbox);
+       req->op = PTP_OP_GET_CLOCK;
+       req->is_pmu = is_pmu;
+       rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
+       if (rc)
+               goto fail;
+
+       if (clock)
+               *clock = rsp->clk;
+       if (tsc)
+               *tsc = rsp->tsc;
+
+fail:
+       return rc;
+}
+
+/* This function calculates two parameters "clk_freq_mult" and
+ * "clk_delta" which is useful in deriving PTP HI clock from
+ * timestamp counter (tsc) value.
+ */
+int
+otx2_nix_raw_clock_tsc_conv(struct otx2_eth_dev *dev)
+{
+       uint64_t ticks_base = 0, ticks = 0, tsc = 0, t_freq;
+       int rc, val;
+
+       /* Calculating the frequency at which PTP HI clock is running */
+       rc = nix_read_raw_clock(dev, &ticks_base, &tsc, false);
+       if (rc) {
+               otx2_err("Failed to read the raw clock value: %d", rc);
+               goto fail;
+       }
+
+       rte_delay_ms(100);
+
+       rc = nix_read_raw_clock(dev, &ticks, &tsc, false);
+       if (rc) {
+               otx2_err("Failed to read the raw clock value: %d", rc);
+               goto fail;
+       }
+
+       t_freq = (ticks - ticks_base) * 10;
+
+       /* Calculating the freq multiplier viz the ratio between the
+        * frequency at which PTP HI clock works and tsc clock runs
+        */
+       dev->clk_freq_mult =
+               (double)pow(10, floor(log10(t_freq))) / rte_get_timer_hz();
+
+       val = false;
+#ifdef RTE_ARM_EAL_RDTSC_USE_PMU
+       val = true;
+#endif
+       rc = nix_read_raw_clock(dev, &ticks, &tsc, val);
+       if (rc) {
+               otx2_err("Failed to read the raw clock value: %d", rc);
+               goto fail;
+       }
+
+       /* Calculating delta between PTP HI clock and tsc */
+       dev->clk_delta = ((uint64_t)(ticks / dev->clk_freq_mult) - tsc);
+
+fail:
+       return rc;
+}
+
 static void
 nix_start_timecounters(struct rte_eth_dev *eth_dev)
 {
@@ -224,6 +299,13 @@ otx2_nix_timesync_adjust_time(struct rte_eth_dev *eth_dev, int64_t delta)
                rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
                if (rc)
                        return rc;
+               /* Since the frequency of PTP comp register is tuned, delta and
+                * freq mult calculation for deriving PTP_HI from timestamp
+                * counter should be done again.
+                */
+               rc = otx2_nix_raw_clock_tsc_conv(dev);
+               if (rc)
+                       otx2_err("Failed to calculate delta and freq mult");
        }
        dev->systime_tc.nsec += delta;
        dev->rx_tstamp_tc.nsec += delta;
@@ -271,3 +353,21 @@ otx2_nix_timesync_read_time(struct rte_eth_dev *eth_dev, struct timespec *ts)
 
        return 0;
 }
+
+
+int
+otx2_nix_read_clock(struct rte_eth_dev *eth_dev, uint64_t *clock)
+{
+       struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+
+       /* This API returns the raw PTP HI clock value. Since LFs doesn't
+        * have direct access to PTP registers and it requires mbox msg
+        * to AF for this value. In fastpath reading this value for every
+        * packet (which involes mbox call) becomes very expensive, hence
+        * we should be able to derive PTP HI clock value from tsc by
+        * using freq_mult and clk_delta calculated during configure stage.
+        */
+       *clock = (rte_get_tsc_cycles() + dev->clk_delta) * dev->clk_freq_mult;
+
+       return 0;
+}