return status;
}
+/**
+ * ice_update_recipe_lkup_idx - update a default recipe based on the lkup_idx
+ * @hw: pointer to the HW struct
+ * @params: parameters used to update the default recipe
+ *
+ * This function only supports updating default recipes and it only supports
+ * updating a single recipe based on the lkup_idx at a time.
+ *
+ * This is done as a read-modify-write operation. First, get the current recipe
+ * contents based on the recipe's ID. Then modify the field vector index and
+ * mask if it's valid at the lkup_idx. Finally, use the add recipe AQ to update
+ * the pre-existing recipe with the modifications.
+ */
+enum ice_status
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+ struct ice_update_recipe_lkup_idx_params *params)
+{
+ struct ice_aqc_recipe_data_elem *rcp_list;
+ u16 num_recps = ICE_MAX_NUM_RECIPES;
+ enum ice_status status;
+
+ rcp_list = (struct ice_aqc_recipe_data_elem *)ice_malloc(hw, num_recps * sizeof(*rcp_list));
+ if (!rcp_list)
+ return ICE_ERR_NO_MEMORY;
+
+ /* read current recipe list from firmware */
+ rcp_list->recipe_indx = params->rid;
+ status = ice_aq_get_recipe(hw, rcp_list, &num_recps, params->rid, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_SW, "Failed to get recipe %d, status %d\n",
+ params->rid, status);
+ goto error_out;
+ }
+
+ /* only modify existing recipe's lkup_idx and mask if valid, while
+ * leaving all other fields the same, then update the recipe firmware
+ */
+ rcp_list->content.lkup_indx[params->lkup_idx] = params->fv_idx;
+ if (params->mask_valid)
+ rcp_list->content.mask[params->lkup_idx] =
+ CPU_TO_LE16(params->mask);
+
+ if (params->ignore_valid)
+ rcp_list->content.lkup_indx[params->lkup_idx] |=
+ ICE_AQ_RECIPE_LKUP_IGNORE;
+
+ status = ice_aq_add_recipe(hw, &rcp_list[0], 1, NULL);
+ if (status)
+ ice_debug(hw, ICE_DBG_SW, "Failed to update recipe %d lkup_idx %d fv_idx %d mask %d mask_valid %s, status %d\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask, params->mask_valid ? "true" : "false",
+ status);
+
+error_out:
+ ice_free(hw, rcp_list);
+ return status;
+}
+
/**
* ice_aq_map_recipe_to_profile - Map recipe to packet profile
* @hw: pointer to the HW struct
}
/**
- * ice_is_dvm_supported - check if double VLAN mode is supported based on DDP
+ * ice_aq_get_vlan_mode - get the VLAN mode of the device
+ * @hw: pointer to the HW structure
+ * @get_params: structure FW fills in based on the current VLAN mode config
+ *
+ * Get VLAN Mode Parameters (0x020D)
+ */
+static enum ice_status
+ice_aq_get_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_get_vlan_mode *get_params)
+{
+ struct ice_aq_desc desc;
+
+ if (!get_params)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_get_vlan_mode_parameters);
+
+ return ice_aq_send_cmd(hw, &desc, get_params, sizeof(*get_params),
+ NULL);
+}
+
+/**
+ * ice_aq_is_dvm_ena - query FW to check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Returns true if the hardware/firmware is configured in double VLAN mode,
+ * else return false signaling that the hardware/firmware is configured in
+ * single VLAN mode.
+ *
+ * Also, return false if this call fails for any reason (i.e. firmware doesn't
+ * support this AQ call).
+ */
+static bool ice_aq_is_dvm_ena(struct ice_hw *hw)
+{
+ struct ice_aqc_get_vlan_mode get_params = { 0 };
+ enum ice_status status;
+
+ status = ice_aq_get_vlan_mode(hw, &get_params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_AQ, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
+ return (get_params.vlan_mode & ICE_AQ_VLAN_MODE_DVM_ENA);
+}
+
+/**
+ * ice_is_dvm_ena - check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * The device is configured in single or double VLAN mode on initialization and
+ * this cannot be dynamically changed during runtime. Based on this there is no
+ * need to make an AQ call every time the driver needs to know the VLAN mode.
+ * Instead, use the cached VLAN mode.
+ */
+bool ice_is_dvm_ena(struct ice_hw *hw)
+{
+ return hw->dvm_ena;
+}
+
+/**
+ * ice_cache_vlan_mode - cache VLAN mode after DDP is downloaded
+ * @hw: pointer to the HW structure
+ *
+ * This is only called after downloading the DDP and after the global
+ * configuration lock has been released because all ports on a device need to
+ * cache the VLAN mode.
+ */
+void ice_cache_vlan_mode(struct ice_hw *hw)
+{
+ hw->dvm_ena = ice_aq_is_dvm_ena(hw) ? true : false;
+}
+
+/**
+ * ice_is_dvm_supported - check if Double VLAN Mode is supported
* @hw: pointer to the hardware structure
*
- * Returns true if DVM is supported and false if only SVM is supported. This
- * function should only be called while the global config lock is held and after
- * the package has been successfully downloaded.
+ * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
+ * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
+ * firmware must support it, otherwise only SVM is supported. This function
+ * should only be called while the global config lock is held and after the
+ * package has been successfully downloaded.
*/
static bool ice_is_dvm_supported(struct ice_hw *hw)
{
+ struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
enum ice_status status;
bool pkg_supports_dvm;
status = ice_pkg_get_supported_vlan_mode(hw, &pkg_supports_dvm);
if (status) {
- ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, err %d\n",
+ ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, status %d\n",
status);
return false;
}
if (!pkg_supports_dvm)
return false;
+ /* If firmware returns success, then it supports DVM, else it only
+ * supports SVM
+ */
+ status = ice_aq_get_vlan_mode(hw, &get_vlan_mode);
+ if (status) {
+ ice_debug(hw, ICE_DBG_NVM, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
return true;
}
+#define ICE_EXTERNAL_VLAN_ID_FV_IDX 11
+#define ICE_SW_LKUP_VLAN_LOC_LKUP_IDX 1
+#define ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX 2
+#define ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX 2
+#define ICE_PKT_FLAGS_0_TO_15_FV_IDX 1
+#define ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK 0xD000
+static struct ice_update_recipe_lkup_idx_params ice_dvm_dflt_recipes[] = {
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_VLAN_LOC_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the VLAN
+ * packet flags to support VLAN filtering on multiple VLAN
+ * ethertypes (i.e. 0x8100 and 0x88a8) in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_PKT_FLAGS_0_TO_15_FV_IDX,
+ .ignore_valid = false,
+ .mask = ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK,
+ .mask_valid = true,
+ .lkup_idx = ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_PROMISC_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_PROMISC_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX,
+ },
+};
+
/**
- * ice_set_svm - set single VLAN mode
+ * ice_dvm_update_dflt_recipes - update default switch recipes in DVM
+ * @hw: hardware structure used to update the recipes
+ */
+static enum ice_status ice_dvm_update_dflt_recipes(struct ice_hw *hw)
+{
+ unsigned long i;
+
+ for (i = 0; i < ARRAY_SIZE(ice_dvm_dflt_recipes); i++) {
+ struct ice_update_recipe_lkup_idx_params *params;
+ enum ice_status status;
+
+ params = &ice_dvm_dflt_recipes[i];
+
+ status = ice_update_recipe_lkup_idx(hw, params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update RID %d lkup_idx %d fv_idx %d mask_valid %s mask 0x%04x\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask_valid ? "true" : "false",
+ params->mask);
+ return status;
+ }
+ }
+
+ return ICE_SUCCESS;
+}
+
+/**
+ * ice_aq_set_vlan_mode - set the VLAN mode of the device
* @hw: pointer to the HW structure
+ * @set_params: requested VLAN mode configuration
+ *
+ * Set VLAN Mode Parameters (0x020C)
+ */
+static enum ice_status
+ice_aq_set_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_set_vlan_mode *set_params)
+{
+ u8 rdma_packet, mng_vlan_prot_id;
+ struct ice_aq_desc desc;
+
+ if (!set_params)
+ return ICE_ERR_PARAM;
+
+ if (set_params->l2tag_prio_tagging > ICE_AQ_VLAN_PRIO_TAG_MAX)
+ return ICE_ERR_PARAM;
+
+ rdma_packet = set_params->rdma_packet;
+ if (rdma_packet != ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING &&
+ rdma_packet != ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING)
+ return ICE_ERR_PARAM;
+
+ mng_vlan_prot_id = set_params->mng_vlan_prot_id;
+ if (mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER &&
+ mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_set_vlan_mode_parameters);
+ desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
+
+ return ice_aq_send_cmd(hw, &desc, set_params, sizeof(*set_params),
+ NULL);
+}
+
+/**
+ * ice_set_dvm - sets up software and hardware for double VLAN mode
+ * @hw: pointer to the hardware structure
*/
-static enum ice_status ice_set_svm_dflt(struct ice_hw *hw)
+static enum ice_status ice_set_dvm(struct ice_hw *hw)
{
- ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+ struct ice_aqc_set_vlan_mode params = { 0 };
+ enum ice_status status;
+
+ params.l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG;
+ params.rdma_packet = ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ params.mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER;
+
+ status = ice_aq_set_vlan_mode(hw, ¶ms);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set double VLAN mode parameters, status %d\n",
+ status);
+ return status;
+ }
- return ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ status = ice_dvm_update_dflt_recipes(hw);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update default recipes for double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, true,
+ NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port in double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ return ICE_SUCCESS;
}
/**
- * ice_init_vlan_mode_ops - initialize VLAN mode configuration ops
+ * ice_set_svm - set single VLAN mode
* @hw: pointer to the HW structure
*/
-void ice_init_vlan_mode_ops(struct ice_hw *hw)
+static enum ice_status ice_set_svm(struct ice_hw *hw)
{
- hw->vlan_mode_ops.set_dvm = NULL;
- hw->vlan_mode_ops.set_svm = ice_set_svm_dflt;
+ struct ice_aqc_set_vlan_mode *set_params;
+ enum ice_status status;
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port parameters for single VLAN mode\n");
+ return status;
+ }
+
+ set_params = (struct ice_aqc_set_vlan_mode *)
+ ice_malloc(hw, sizeof(*set_params));
+ if (!set_params)
+ return ICE_ERR_NO_MEMORY;
+
+ /* default configuration for SVM configurations */
+ set_params->l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG;
+ set_params->rdma_packet = ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ set_params->mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER;
+
+ status = ice_aq_set_vlan_mode(hw, set_params);
+ if (status)
+ ice_debug(hw, ICE_DBG_INIT, "Failed to configure port in single VLAN mode\n");
+
+ ice_free(hw, set_params);
+ return status;
}
/**
*/
enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
- enum ice_status status = ICE_ERR_NOT_IMPL;
-
if (!ice_is_dvm_supported(hw))
return ICE_SUCCESS;
- if (hw->vlan_mode_ops.set_dvm)
- status = hw->vlan_mode_ops.set_dvm(hw);
-
- if (status)
- return hw->vlan_mode_ops.set_svm(hw);
+ if (!ice_set_dvm(hw))
+ return ICE_SUCCESS;
- return ICE_SUCCESS;
+ return ice_set_svm(hw);
}
git.droids-corp.org / dpdk.git / commitdiff