MLX5_MP_REQ_START_RXTX,
MLX5_MP_REQ_STOP_RXTX,
MLX5_MP_REQ_QUEUE_STATE_MODIFY,
+ MLX5_MP_REQ_QUEUE_RX_STOP,
+ MLX5_MP_REQ_QUEUE_RX_START,
+ MLX5_MP_REQ_QUEUE_TX_STOP,
+ MLX5_MP_REQ_QUEUE_TX_START,
};
struct mlx5_mp_arg_queue_state_modify {
enum ibv_wq_state state; /* WQ requested state. */
};
+struct mlx5_mp_arg_queue_id {
+ uint16_t queue_id; /* DPDK queue ID. */
+};
+
/* Pameters for IPC. */
struct mlx5_mp_param {
enum mlx5_mp_req_type type;
uintptr_t addr; /* MLX5_MP_REQ_CREATE_MR */
struct mlx5_mp_arg_queue_state_modify state_modify;
/* MLX5_MP_REQ_QUEUE_STATE_MODIFY */
+ struct mlx5_mp_arg_queue_id queue_id;
+ /* MLX5_MP_REQ_QUEUE_RX/TX_START/STOP */
} args;
};
(dev, ¶m->args.state_modify);
ret = rte_mp_reply(&mp_res, peer);
break;
+ case MLX5_MP_REQ_QUEUE_RX_STOP:
+ mp_init_msg(&priv->mp_id, &mp_res, param->type);
+ res->result = mlx5_rx_queue_stop_primary
+ (dev, param->args.queue_id.queue_id);
+ ret = rte_mp_reply(&mp_res, peer);
+ break;
+ case MLX5_MP_REQ_QUEUE_RX_START:
+ mp_init_msg(&priv->mp_id, &mp_res, param->type);
+ res->result = mlx5_rx_queue_start_primary
+ (dev, param->args.queue_id.queue_id);
+ ret = rte_mp_reply(&mp_res, peer);
+ break;
+ case MLX5_MP_REQ_QUEUE_TX_STOP:
+ mp_init_msg(&priv->mp_id, &mp_res, param->type);
+ res->result = mlx5_tx_queue_stop_primary
+ (dev, param->args.queue_id.queue_id);
+ ret = rte_mp_reply(&mp_res, peer);
+ break;
+ case MLX5_MP_REQ_QUEUE_TX_START:
+ mp_init_msg(&priv->mp_id, &mp_res, param->type);
+ res->result = mlx5_tx_queue_start_primary
+ (dev, param->args.queue_id.queue_id);
+ ret = rte_mp_reply(&mp_res, peer);
+ break;
default:
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u invalid mp request type",
int
mlx5_mp_os_secondary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
{
- struct rte_mp_msg mp_res;
+struct rte_mp_msg mp_res;
struct mlx5_mp_param *res = (struct mlx5_mp_param *)mp_res.param;
const struct mlx5_mp_param *param =
(const struct mlx5_mp_param *)mp_msg->param;
{
mp_req_on_rxtx(dev, MLX5_MP_REQ_STOP_RXTX);
}
+
+/**
+ * Request Verbs Rx/Tx queue stop or start to the primary process.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet structure.
+ * @param queue_id
+ * Queue ID to control.
+ * @param req_type
+ * request type
+ * MLX5_MP_REQ_QUEUE_RX_START - start Rx queue
+ * MLX5_MP_REQ_QUEUE_TX_START - stop Tx queue
+ * MLX5_MP_REQ_QUEUE_RX_STOP - stop Rx queue
+ * MLX5_MP_REQ_QUEUE_TX_STOP - stop Tx queue
+ * @return
+ * 0 on success, a negative errno value otherwise and
+ * rte_errno is set.
+ */
+int
+mlx5_mp_os_req_queue_control(struct rte_eth_dev *dev, uint16_t queue_id,
+ enum mlx5_mp_req_type req_type)
+{
+ struct rte_mp_msg mp_req;
+ struct rte_mp_msg *mp_res;
+ struct rte_mp_reply mp_rep;
+ struct mlx5_mp_param *req = (struct mlx5_mp_param *)mp_req.param;
+ struct mlx5_mp_param *res;
+ struct timespec ts = {.tv_sec = MLX5_MP_REQ_TIMEOUT_SEC, .tv_nsec = 0};
+ struct mlx5_priv *priv;
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
+ priv = dev->data->dev_private;
+ mp_init_msg(&priv->mp_id, &mp_req, req_type);
+ req->args.queue_id.queue_id = queue_id;
+ ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
+ if (ret) {
+ DRV_LOG(ERR, "port %u request to primary process failed",
+ dev->data->port_id);
+ return -rte_errno;
+ }
+ MLX5_ASSERT(mp_rep.nb_received == 1);
+ mp_res = &mp_rep.msgs[0];
+ res = (struct mlx5_mp_param *)mp_res->param;
+ ret = res->result;
+ free(mp_rep.msgs);
+ return ret;
+}
.tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.flow_ctrl_set = mlx5_dev_set_flow_ctrl,
.mac_addr_remove = mlx5_mac_addr_remove,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
.read_clock = mlx5_txpp_read_clock,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
.rxq_info_get = mlx5_rxq_info_get,
.tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
+ .rx_queue_start = mlx5_rx_queue_start,
+ .rx_queue_stop = mlx5_rx_queue_stop,
+ .tx_queue_start = mlx5_tx_queue_start,
+ .tx_queue_stop = mlx5_tx_queue_stop,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.flow_ctrl_set = mlx5_dev_set_flow_ctrl,
.mac_addr_remove = mlx5_mac_addr_remove,
uint32_t nb_contexts, struct rte_flow_error *error);
/* mlx5_mp_os.c */
+
int mlx5_mp_os_primary_handle(const struct rte_mp_msg *mp_msg,
const void *peer);
int mlx5_mp_os_secondary_handle(const struct rte_mp_msg *mp_msg,
const void *peer);
void mlx5_mp_os_req_start_rxtx(struct rte_eth_dev *dev);
void mlx5_mp_os_req_stop_rxtx(struct rte_eth_dev *dev);
+int mlx5_mp_os_req_queue_control(struct rte_eth_dev *dev, uint16_t queue_id,
+ enum mlx5_mp_req_type req_type);
/* mlx5_socket.c */
return (rte_atomic32_read(&rxq_ctrl->refcnt) == 1);
}
+/* Fetches and drops all SW-owned and error CQEs to synchronize CQ. */
+static void
+rxq_sync_cq(struct mlx5_rxq_data *rxq)
+{
+ const uint16_t cqe_n = 1 << rxq->cqe_n;
+ const uint16_t cqe_mask = cqe_n - 1;
+ volatile struct mlx5_cqe *cqe;
+ int ret, i;
+
+ i = cqe_n;
+ do {
+ cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_mask];
+ ret = check_cqe(cqe, cqe_n, rxq->cq_ci);
+ if (ret == MLX5_CQE_STATUS_HW_OWN)
+ break;
+ if (ret == MLX5_CQE_STATUS_ERR) {
+ rxq->cq_ci++;
+ continue;
+ }
+ MLX5_ASSERT(ret == MLX5_CQE_STATUS_SW_OWN);
+ if (MLX5_CQE_FORMAT(cqe->op_own) != MLX5_COMPRESSED) {
+ rxq->cq_ci++;
+ continue;
+ }
+ /* Compute the next non compressed CQE. */
+ rxq->cq_ci += rte_be_to_cpu_32(cqe->byte_cnt);
+
+ } while (--i);
+ /* Move all CQEs to HW ownership, including possible MiniCQEs. */
+ for (i = 0; i < cqe_n; i++) {
+ cqe = &(*rxq->cqes)[i];
+ cqe->op_own = MLX5_CQE_INVALIDATE;
+ }
+ /* Resync CQE and WQE (WQ in RESET state). */
+ rte_cio_wmb();
+ *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
+ rte_cio_wmb();
+ *rxq->rq_db = rte_cpu_to_be_32(0);
+ rte_cio_wmb();
+}
+
+/**
+ * Rx queue stop. Device queue goes to the RESET state,
+ * all involved mbufs are freed from WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
+ struct ibv_wq_attr mod = {
+ .attr_mask = IBV_WQ_ATTR_STATE,
+ .wq_state = IBV_WQS_RESET,
+ };
+
+ ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
+ } else { /* rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ. */
+ struct mlx5_devx_modify_rq_attr rq_attr;
+
+ memset(&rq_attr, 0, sizeof(rq_attr));
+ rq_attr.rq_state = MLX5_RQC_STATE_RST;
+ rq_attr.state = MLX5_RQC_STATE_RDY;
+ ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq, &rq_attr);
+ }
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Rx WQ state to RESET: %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ /* Remove all processes CQEs. */
+ rxq_sync_cq(rxq);
+ /* Free all involved mbufs. */
+ rxq_free_elts(rxq_ctrl);
+ /* Set the actual queue state. */
+ dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ return 0;
+}
+
+/**
+ * Rx queue stop. Device queue goes to the RESET state,
+ * all involved mbufs are freed from WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_queue_stop(struct rte_eth_dev *dev, uint16_t idx)
+{
+ eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
+ int ret;
+
+ if (dev->data->rx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be stopped");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->rx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STOPPED)
+ return 0;
+ /*
+ * Vectorized Rx burst requires the CQ and RQ indices
+ * synchronized, that might be broken on RQ restart
+ * and cause Rx malfunction, so queue stopping is
+ * not supported if vectorized Rx burst is engaged.
+ * The routine pointer depends on the process
+ * type, should perform check there.
+ */
+ if (pkt_burst == mlx5_rx_burst) {
+ DRV_LOG(ERR, "Rx queue stop is not supported "
+ "for vectorized Rx");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_RX_STOP);
+ } else {
+ ret = mlx5_rx_queue_stop_primary(dev, idx);
+ }
+ return ret;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_queue_start_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of(rxq, struct mlx5_rxq_ctrl, rxq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Allocate needed buffers. */
+ ret = rxq_alloc_elts(rxq_ctrl);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot reallocate buffers for Rx WQ");
+ rte_errno = errno;
+ return ret;
+ }
+ rte_cio_wmb();
+ *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
+ rte_cio_wmb();
+ /* Reset RQ consumer before moving queue ro READY state. */
+ *rxq->rq_db = rte_cpu_to_be_32(0);
+ rte_cio_wmb();
+ if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
+ struct ibv_wq_attr mod = {
+ .attr_mask = IBV_WQ_ATTR_STATE,
+ .wq_state = IBV_WQS_RDY,
+ };
+
+ ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
+ } else { /* rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ. */
+ struct mlx5_devx_modify_rq_attr rq_attr;
+
+ memset(&rq_attr, 0, sizeof(rq_attr));
+ rq_attr.rq_state = MLX5_RQC_STATE_RDY;
+ rq_attr.state = MLX5_RQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq, &rq_attr);
+ }
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Rx WQ state to READY: %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ /* Reinitialize RQ - set WQEs. */
+ mlx5_rxq_initialize(rxq);
+ rxq->err_state = MLX5_RXQ_ERR_STATE_NO_ERROR;
+ /* Set actual queue state. */
+ dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
+ return 0;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rx_queue_start(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (dev->data->rx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be started");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->rx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STARTED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_RX_START);
+ } else {
+ ret = mlx5_rx_queue_start_primary(dev, idx);
+ }
+ return ret;
+}
+
/**
* Rx queue presetup checks.
*
rte_atomic32_inc(&tmpl->refcnt);
LIST_INSERT_HEAD(&priv->rxqsobj, tmpl, next);
priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
+ dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
return tmpl;
}
rte_atomic32_inc(&tmpl->refcnt);
LIST_INSERT_HEAD(&priv->rxqsobj, tmpl, next);
priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
+ dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
return tmpl;
error:
if (tmpl) {
int mlx5_mprq_enabled(struct rte_eth_dev *dev);
int mlx5_mprq_free_mp(struct rte_eth_dev *dev);
int mlx5_mprq_alloc_mp(struct rte_eth_dev *dev);
+int mlx5_rx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_rx_queue_stop(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_rx_queue_start_primary(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_rx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t queue_id);
int mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
unsigned int socket, const struct rte_eth_rxconf *conf,
struct rte_mempool *mp);
/* mlx5_txq.c */
+int mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_tx_queue_stop(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_tx_queue_start_primary(struct rte_eth_dev *dev, uint16_t queue_id);
+int mlx5_tx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t queue_id);
int mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
unsigned int socket, const struct rte_eth_txconf *conf);
int mlx5_tx_hairpin_queue_setup
return offloads;
}
+/* Fetches and drops all SW-owned and error CQEs to synchronize CQ. */
+static void
+txq_sync_cq(struct mlx5_txq_data *txq)
+{
+ volatile struct mlx5_cqe *cqe;
+ int ret, i;
+
+ i = txq->cqe_s;
+ do {
+ cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
+ if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
+ if (likely(ret != MLX5_CQE_STATUS_ERR)) {
+ /* No new CQEs in completion queue. */
+ MLX5_ASSERT(ret == MLX5_CQE_STATUS_HW_OWN);
+ break;
+ }
+ }
+ ++txq->cq_ci;
+ } while (--i);
+ /* Move all CQEs to HW ownership. */
+ for (i = 0; i < txq->cqe_s; i++) {
+ cqe = &txq->cqes[i];
+ cqe->op_own = MLX5_CQE_INVALIDATE;
+ }
+ /* Resync CQE and WQE (WQ in reset state). */
+ rte_cio_wmb();
+ *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
+ rte_cio_wmb();
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Move QP to RESET state. */
+ if (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_SQ) {
+ struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
+
+ /* Change queue state to reset with DevX. */
+ msq_attr.sq_state = MLX5_SQC_STATE_RDY;
+ msq_attr.state = MLX5_SQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_sq(txq_ctrl->obj->sq_devx,
+ &msq_attr);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RESET %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ } else {
+ struct ibv_qp_attr mod = {
+ .qp_state = IBV_QPS_RESET,
+ .port_num = (uint8_t)priv->dev_port,
+ };
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
+
+ /* Change queue state to reset with Verbs. */
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ }
+ /* Handle all send completions. */
+ txq_sync_cq(txq);
+ /* Free elts stored in the SQ. */
+ txq_free_elts(txq_ctrl);
+ /* Prevent writing new pkts to SQ by setting no free WQE.*/
+ txq->wqe_ci = txq->wqe_s;
+ txq->wqe_pi = 0;
+ txq->elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ return 0;
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be stopped");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STOPPED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_STOP);
+ } else {
+ ret = mlx5_tx_queue_stop_primary(dev, idx);
+ }
+ return ret;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ if (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_SQ) {
+ struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
+ struct mlx5_txq_obj *obj = txq_ctrl->obj;
+
+ msq_attr.sq_state = MLX5_SQC_STATE_RDY;
+ msq_attr.state = MLX5_SQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_sq(obj->sq_devx, &msq_attr);
+ if (ret) {
+ rte_errno = errno;
+ DRV_LOG(ERR,
+ "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ return ret;
+ }
+ msq_attr.sq_state = MLX5_SQC_STATE_RST;
+ msq_attr.state = MLX5_SQC_STATE_RDY;
+ ret = mlx5_devx_cmd_modify_sq(obj->sq_devx, &msq_attr);
+ if (ret) {
+ rte_errno = errno;
+ DRV_LOG(ERR,
+ "Cannot change the Tx QP state to READY "
+ "%s", strerror(errno));
+ return ret;
+ }
+ } else {
+ struct ibv_qp_attr mod = {
+ .qp_state = IBV_QPS_RESET,
+ .port_num = (uint8_t)priv->dev_port,
+ };
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
+
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_INIT;
+ ret = mlx5_glue->modify_qp(qp, &mod,
+ (IBV_QP_STATE | IBV_QP_PORT));
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTR;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTS;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ }
+ txq_ctrl->txq.wqe_ci = 0;
+ txq_ctrl->txq.wqe_pi = 0;
+ txq_ctrl->txq.elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
+ return 0;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be started");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STARTED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_START);
+ } else {
+ ret = mlx5_tx_queue_start_primary(dev, idx);
+ }
+ return ret;
+}
+
/**
* Tx queue presetup checks.
*
DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
dev->data->port_id, idx);
(*priv->txqs)[idx] = &txq_ctrl->txq;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
return 0;
}
DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
dev->data->port_id, idx);
(*priv->txqs)[idx] = &txq_ctrl->txq;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
return 0;
}
LIST_REMOVE(txq, next);
mlx5_free(txq);
(*priv->txqs)[idx] = NULL;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
return 0;
}
return 1;
git.droids-corp.org / dpdk.git / commitdiff