virtio: use soft vlan encap/decap
authorStephen Hemminger <stephen@networkplumber.org>
Mon, 9 Feb 2015 01:13:55 +0000 (09:13 +0800)
committerThomas Monjalon <thomas.monjalon@6wind.com>
Fri, 20 Feb 2015 18:18:52 +0000 (19:18 +0100)
Implement VLAN stripping in software. This allows application
to be device independent.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
lib/librte_ether/rte_ethdev.h
lib/librte_pmd_virtio/virtio_ethdev.c
lib/librte_pmd_virtio/virtio_pci.h
lib/librte_pmd_virtio/virtio_rxtx.c

index 6e454e8..1b51c2f 100644 (file)
@@ -643,6 +643,9 @@ struct rte_eth_rxconf {
 #define ETH_TXQ_FLAGS_NOOFFLOADS \
                (ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
                 ETH_TXQ_FLAGS_NOXSUMUDP  | ETH_TXQ_FLAGS_NOXSUMTCP)
+#define ETH_TXQ_FLAGS_NOXSUMS \
+               (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+                ETH_TXQ_FLAGS_NOXSUMTCP)
 /**
  * A structure used to configure a TX ring of an Ethernet port.
  */
index b7f541a..cb8764d 100644 (file)
@@ -1049,6 +1049,8 @@ virtio_dev_configure(struct rte_eth_dev *dev)
                return (-EINVAL);
        }
 
+       hw->vlan_strip = rxmode->hw_vlan_strip;
+
        ret = vtpci_irq_config(hw, 0);
        if (ret != 0)
                PMD_DRV_LOG(ERR, "failed to set config vector");
index fd9d726..98758e8 100644 (file)
@@ -168,6 +168,7 @@ struct virtio_hw {
        uint32_t    max_tx_queues;
        uint32_t    max_rx_queues;
        uint16_t    vtnet_hdr_size;
+       uint8_t     vlan_strip;
        uint8_t     use_msix;
        uint8_t     mac_addr[ETHER_ADDR_LEN];
 };
index e4bcc8e..adda2a8 100644 (file)
@@ -49,6 +49,7 @@
 #include <rte_prefetch.h>
 #include <rte_string_fns.h>
 #include <rte_errno.h>
+#include <rte_byteorder.h>
 
 #include "virtio_logs.h"
 #include "virtio_ethdev.h"
@@ -407,8 +408,8 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 
        PMD_INIT_FUNC_TRACE();
 
-       if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOOFFLOADS)
-           != ETH_TXQ_FLAGS_NOOFFLOADS) {
+       if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOXSUMS)
+           != ETH_TXQ_FLAGS_NOXSUMS) {
                PMD_INIT_LOG(ERR, "TX checksum offload not supported\n");
                return -EINVAL;
        }
@@ -445,6 +446,7 @@ uint16_t
 virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 {
        struct virtqueue *rxvq = rx_queue;
+       struct virtio_hw *hw = rxvq->hw;
        struct rte_mbuf *rxm, *new_mbuf;
        uint16_t nb_used, num, nb_rx = 0;
        uint32_t len[VIRTIO_MBUF_BURST_SZ];
@@ -488,6 +490,9 @@ virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
                rxm->pkt_len = (uint32_t)(len[i] - hdr_size);
                rxm->data_len = (uint16_t)(len[i] - hdr_size);
 
+               if (hw->vlan_strip)
+                       rte_vlan_strip(rxm);
+
                VIRTIO_DUMP_PACKET(rxm, rxm->data_len);
 
                rx_pkts[nb_rx++] = rxm;
@@ -715,6 +720,17 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
                 */
                if (likely(need <= 0)) {
                        txm = tx_pkts[nb_tx];
+
+                       /* Do VLAN tag insertion */
+                       if (txm->ol_flags & PKT_TX_VLAN_PKT) {
+                               error = rte_vlan_insert(&txm);
+                               if (unlikely(error)) {
+                                       rte_pktmbuf_free(txm);
+                                       ++nb_tx;
+                                       continue;
+                               }
+                       }
+
                        /* Enqueue Packet buffers */
                        error = virtqueue_enqueue_xmit(txvq, txm);
                        if (unlikely(error)) {