net/enic: support eCPRI matching

eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.

Only up though the first packet header in the PDU can be matched.
RSS on the eCPRI payload is not supported.

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

diff --git a/doc/guides/nics/features/enic.ini b/doc/guides/nics/features/enic.ini
index 00231baf850ca4cb28d8929d5052e401b7bf7003..61bec4910eedd7c17ab587349cada2bb287ddfc5 100644 (file)
--- a/doc/guides/nics/features/enic.ini
+++ b/doc/guides/nics/features/enic.ini
@@ -39,6 +39,7 @@ x86-64               = Y
 Usage doc            = Y
 
 [rte_flow items]
+ecpri                = Y
 eth                  = Y
 geneve               = Y
 geneve_opt           = Y

diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index a1cf3ec3b350f0f31824e0d32bc7c5544c052221..a3e280715e9cefef01fde662a16cf5ec40c75079 100644 (file)
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -65,6 +65,7 @@ New Features
 * **Updated Cisco enic driver.**
 
   * Added rte_flow support for matching GENEVE packets.
+  * Added rte_flow support for matching eCPRI packets.
 
 * **Updated Marvell cnxk crypto PMD.**
 

diff --git a/drivers/net/enic/enic_fm_flow.c b/drivers/net/enic/enic_fm_flow.c
index d8718d17efb161abaa145e22a0c334bfd1d4fa58..f0bda19a7090c80d3ac8c8e7cd37648960921624 100644 (file)
--- a/drivers/net/enic/enic_fm_flow.c
+++ b/drivers/net/enic/enic_fm_flow.c
@@ -237,6 +237,7 @@ static enic_copy_item_fn enic_fm_copy_item_vxlan;
 static enic_copy_item_fn enic_fm_copy_item_gtp;
 static enic_copy_item_fn enic_fm_copy_item_geneve;
 static enic_copy_item_fn enic_fm_copy_item_geneve_opt;
+static enic_copy_item_fn enic_fm_copy_item_ecpri;
 
 /* Ingress actions */
 static const enum rte_flow_action_type enic_fm_supported_ig_actions[] = {
@@ -392,6 +393,15 @@ static const struct enic_fm_items enic_fm_items[] = {
                               RTE_FLOW_ITEM_TYPE_END,
                },
        },
+       [RTE_FLOW_ITEM_TYPE_ECPRI] = {
+               .copy_item = enic_fm_copy_item_ecpri,
+               .valid_start_item = 1,
+               .prev_items = (const enum rte_flow_item_type[]) {
+                              RTE_FLOW_ITEM_TYPE_ETH,
+                              RTE_FLOW_ITEM_TYPE_UDP,
+                              RTE_FLOW_ITEM_TYPE_END,
+               },
+       },
 };
 
 static int
@@ -877,6 +887,61 @@ enic_fm_copy_item_geneve_opt(struct copy_item_args *arg)
        return 0;
 }
 
+/* Match eCPRI combined message header */
+static int
+enic_fm_copy_item_ecpri(struct copy_item_args *arg)
+{
+       const struct rte_flow_item *item = arg->item;
+       const struct rte_flow_item_ecpri *spec = item->spec;
+       const struct rte_flow_item_ecpri *mask = item->mask;
+       struct fm_tcam_match_entry *entry = arg->fm_tcam_entry;
+       struct fm_header_set *fm_data, *fm_mask;
+       uint8_t *fm_data_to, *fm_mask_to;
+
+       ENICPMD_FUNC_TRACE();
+
+       /* Tunneling not supported- only matching on inner eCPRI fields. */
+       if (arg->header_level > 0)
+               return -EINVAL;
+
+       /* Need both spec and mask */
+       if (!spec || !mask)
+               return -EINVAL;
+
+       fm_data = &entry->ftm_data.fk_hdrset[0];
+       fm_mask = &entry->ftm_mask.fk_hdrset[0];
+
+       /* eCPRI can only follow L2/VLAN layer if ethernet type is 0xAEFE. */
+       if (!(fm_data->fk_metadata & FKM_UDP) &&
+           (fm_mask->l2.eth.fk_ethtype != UINT16_MAX ||
+           rte_cpu_to_be_16(fm_data->l2.eth.fk_ethtype) !=
+           RTE_ETHER_TYPE_ECPRI))
+               return -EINVAL;
+
+       if (fm_data->fk_metadata & FKM_UDP) {
+               /* eCPRI on UDP */
+               fm_data->fk_header_select |= FKH_L4RAW;
+               fm_mask->fk_header_select |= FKH_L4RAW;
+               fm_data_to = &fm_data->l4.rawdata[sizeof(fm_data->l4.udp)];
+               fm_mask_to = &fm_mask->l4.rawdata[sizeof(fm_data->l4.udp)];
+       } else {
+               /* eCPRI directly after Etherent header */
+               fm_data->fk_header_select |= FKH_L3RAW;
+               fm_mask->fk_header_select |= FKH_L3RAW;
+               fm_data_to = &fm_data->l3.rawdata[0];
+               fm_mask_to = &fm_mask->l3.rawdata[0];
+       }
+
+       /*
+        * Use the raw L3 or L4 buffer to match eCPRI since fm_header_set does
+        * not have eCPRI header. Only 1st message header of PDU can be matched.
+        * "C" * bit ignored.
+        */
+       memcpy(fm_data_to, spec, sizeof(*spec));
+       memcpy(fm_mask_to, mask, sizeof(*mask));
+       return 0;
+}
+
 /*
  * Currently, raw pattern match is very limited. It is intended for matching
  * UDP tunnel header (e.g. vxlan or geneve).