--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2021 Intel Corporation
+ */
+
+#ifndef _ICE_CGU_REGS_H_
+#define _ICE_CGU_REGS_H_
+
+#define NAC_CGU_DWORD9 0x24
+union nac_cgu_dword9 {
+ struct {
+ u32 time_ref_freq_sel : 3;
+ u32 clk_eref1_en : 1;
+ u32 clk_eref0_en : 1;
+ u32 time_ref_en : 1;
+ u32 time_sync_en : 1;
+ u32 one_pps_out_en : 1;
+ u32 clk_ref_synce_en : 1;
+ u32 clk_synce1_en : 1;
+ u32 clk_synce0_en : 1;
+ u32 net_clk_ref1_en : 1;
+ u32 net_clk_ref0_en : 1;
+ u32 clk_synce1_amp : 2;
+ u32 misc6 : 1;
+ u32 clk_synce0_amp : 2;
+ u32 one_pps_out_amp : 2;
+ u32 misc24 : 12;
+ } field;
+ u32 val;
+};
+
+#define NAC_CGU_DWORD19 0x4c
+union nac_cgu_dword19 {
+ struct {
+ u32 tspll_fbdiv_intgr : 8;
+ u32 fdpll_ulck_thr : 5;
+ u32 misc15 : 3;
+ u32 tspll_ndivratio : 4;
+ u32 tspll_iref_ndivratio : 3;
+ u32 misc19 : 1;
+ u32 japll_ndivratio : 4;
+ u32 japll_iref_ndivratio : 3;
+ u32 misc27 : 1;
+ } field;
+ u32 val;
+};
+
+#define NAC_CGU_DWORD22 0x58
+union nac_cgu_dword22 {
+ struct {
+ u32 fdpll_frac_div_out_nc : 2;
+ u32 fdpll_lock_int_for : 1;
+ u32 synce_hdov_int_for : 1;
+ u32 synce_lock_int_for : 1;
+ u32 fdpll_phlead_slip_nc : 1;
+ u32 fdpll_acc1_ovfl_nc : 1;
+ u32 fdpll_acc2_ovfl_nc : 1;
+ u32 synce_status_nc : 6;
+ u32 fdpll_acc1f_ovfl : 1;
+ u32 misc18 : 1;
+ u32 fdpllclk_div : 4;
+ u32 time1588clk_div : 4;
+ u32 synceclk_div : 4;
+ u32 synceclk_sel_div2 : 1;
+ u32 fdpllclk_sel_div2 : 1;
+ u32 time1588clk_sel_div2 : 1;
+ u32 misc3 : 1;
+ } field;
+ u32 val;
+};
+
+#define NAC_CGU_DWORD24 0x60
+union nac_cgu_dword24 {
+ struct {
+ u32 tspll_fbdiv_frac : 22;
+ u32 misc20 : 2;
+ u32 ts_pll_enable : 1;
+ u32 time_sync_tspll_align_sel : 1;
+ u32 ext_synce_sel : 1;
+ u32 ref1588_ck_div : 4;
+ u32 time_ref_sel : 1;
+ } field;
+ u32 val;
+};
+
+#define TSPLL_CNTR_BIST_SETTINGS 0x344
+union tspll_cntr_bist_settings {
+ struct {
+ u32 i_irefgen_settling_time_cntr_7_0 : 8;
+ u32 i_irefgen_settling_time_ro_standby_1_0 : 2;
+ u32 reserved195 : 5;
+ u32 i_plllock_sel_0 : 1;
+ u32 i_plllock_sel_1 : 1;
+ u32 i_plllock_cnt_6_0 : 7;
+ u32 i_plllock_cnt_10_7 : 4;
+ u32 reserved200 : 4;
+ } field;
+ u32 val;
+};
+
+#define TSPLL_RO_BWM_LF 0x370
+union tspll_ro_bwm_lf {
+ struct {
+ u32 bw_freqov_high_cri_7_0 : 8;
+ u32 bw_freqov_high_cri_9_8 : 2;
+ u32 biascaldone_cri : 1;
+ u32 plllock_gain_tran_cri : 1;
+ u32 plllock_true_lock_cri : 1;
+ u32 pllunlock_flag_cri : 1;
+ u32 afcerr_cri : 1;
+ u32 afcdone_cri : 1;
+ u32 feedfwrdgain_cal_cri_7_0 : 8;
+ u32 m2fbdivmod_cri_7_0 : 8;
+ } field;
+ u32 val;
+};
+
+#endif /* _ICE_CGU_REGS_H_ */
#include "ice_common.h"
#include "ice_ptp_hw.h"
#include "ice_ptp_consts.h"
-
+#include "ice_cgu_regs.h"
/* Low level functions for interacting with and managing the device clock used
* for the Precision Time Protocol.
return ICE_SUCCESS;
}
+/**
+ * ice_read_cgu_reg_e822 - Read a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to read
+ * @val: storage for register value read
+ *
+ * Read the contents of a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static enum ice_status
+ice_read_cgu_reg_e822(struct ice_hw *hw, u32 addr, u32 *val)
+{
+ struct ice_sbq_msg_input cgu_msg;
+ enum ice_status status;
+
+ cgu_msg.opcode = ice_sbq_msg_rd;
+ cgu_msg.dest_dev = cgu;
+ cgu_msg.msg_addr_low = addr;
+ cgu_msg.msg_addr_high = 0x0;
+
+ status = ice_sbq_rw_reg_lp(hw, &cgu_msg, true);
+ if (status) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, status %d\n",
+ addr, status);
+ return status;
+ }
+
+ *val = cgu_msg.data;
+
+ return status;
+}
+
+/**
+ * ice_write_cgu_reg_e822 - Write a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to write
+ * @val: value to write into the register
+ *
+ * Write the specified value to a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static enum ice_status
+ice_write_cgu_reg_e822(struct ice_hw *hw, u32 addr, u32 val)
+{
+ struct ice_sbq_msg_input cgu_msg;
+ enum ice_status status;
+
+ cgu_msg.opcode = ice_sbq_msg_wr;
+ cgu_msg.dest_dev = cgu;
+ cgu_msg.msg_addr_low = addr;
+ cgu_msg.msg_addr_high = 0x0;
+ cgu_msg.data = val;
+
+ status = ice_sbq_rw_reg_lp(hw, &cgu_msg, true);
+ if (status) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, status %d\n",
+ addr, status);
+ return status;
+ }
+
+ return status;
+}
+
+/**
+ * ice_clk_freq_str - Convert time_ref_freq to string
+ * @clk_freq: Clock frequency
+ *
+ * Convert the specified TIME_REF clock frequency to a string.
+ */
+static const char *ice_clk_freq_str(u8 clk_freq)
+{
+ switch ((enum ice_time_ref_freq)clk_freq) {
+ case ICE_TIME_REF_FREQ_25_000:
+ return "25 MHz";
+ case ICE_TIME_REF_FREQ_122_880:
+ return "122.88 MHz";
+ case ICE_TIME_REF_FREQ_125_000:
+ return "125 MHz";
+ case ICE_TIME_REF_FREQ_153_600:
+ return "153.6 MHz";
+ case ICE_TIME_REF_FREQ_156_250:
+ return "156.25 MHz";
+ case ICE_TIME_REF_FREQ_245_760:
+ return "245.76 MHz";
+ default:
+ return "Unknown";
+ }
+}
+
+/**
+ * ice_clk_src_str - Convert time_ref_src to string
+ * @clk_src: Clock source
+ *
+ * Convert the specified clock source to its string name.
+ */
+static const char *ice_clk_src_str(u8 clk_src)
+{
+ switch ((enum ice_clk_src)clk_src) {
+ case ICE_CLK_SRC_TCX0:
+ return "TCX0";
+ case ICE_CLK_SRC_TIME_REF:
+ return "TIME_REF";
+ default:
+ return "Unknown";
+ }
+}
+
+/**
+ * ice_cfg_cgu_pll_e822 - Configure the Clock Generation Unit
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ *
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
+ */
+enum ice_status
+ice_cfg_cgu_pll_e822(struct ice_hw *hw, enum ice_time_ref_freq clk_freq,
+ enum ice_clk_src clk_src)
+{
+ union tspll_ro_bwm_lf bwm_lf;
+ union nac_cgu_dword19 dw19;
+ union nac_cgu_dword22 dw22;
+ union nac_cgu_dword24 dw24;
+ union nac_cgu_dword9 dw9;
+ enum ice_status status;
+
+ if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+ ice_warn(hw, "Invalid TIME_REF frequency %u\n", clk_freq);
+ return ICE_ERR_PARAM;
+ }
+
+ if (clk_src >= NUM_ICE_CLK_SRC) {
+ ice_warn(hw, "Invalid clock source %u\n", clk_src);
+ return ICE_ERR_PARAM;
+ }
+
+ if (clk_src == ICE_CLK_SRC_TCX0 &&
+ clk_freq != ICE_TIME_REF_FREQ_25_000) {
+ ice_warn(hw, "TCX0 only supports 25 MHz frequency\n");
+ return ICE_ERR_PARAM;
+ }
+
+ status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD9, &dw9.val);
+ if (status)
+ return status;
+
+ status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD24, &dw24.val);
+ if (status)
+ return status;
+
+ status = ice_read_cgu_reg_e822(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+ if (status)
+ return status;
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.field.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw24.field.time_ref_sel),
+ ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+ bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+ /* Disable the PLL before changing the clock source or frequency */
+ if (dw24.field.ts_pll_enable) {
+ dw24.field.ts_pll_enable = 0;
+
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+ if (status)
+ return status;
+ }
+
+ /* Set the frequency */
+ dw9.field.time_ref_freq_sel = clk_freq;
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD9, dw9.val);
+ if (status)
+ return status;
+
+ /* Configure the TS PLL feedback divisor */
+ status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD19, &dw19.val);
+ if (status)
+ return status;
+
+ dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
+ dw19.field.tspll_ndivratio = 1;
+
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD19, dw19.val);
+ if (status)
+ return status;
+
+ /* Configure the TS PLL post divisor */
+ status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD22, &dw22.val);
+ if (status)
+ return status;
+
+ dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
+ dw22.field.time1588clk_sel_div2 = 0;
+
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD22, dw22.val);
+ if (status)
+ return status;
+
+ /* Configure the TS PLL pre divisor and clock source */
+ status = ice_read_cgu_reg_e822(hw, NAC_CGU_DWORD24, &dw24.val);
+ if (status)
+ return status;
+
+ dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
+ dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
+ dw24.field.time_ref_sel = clk_src;
+
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+ if (status)
+ return status;
+
+ /* Finally, enable the PLL */
+ dw24.field.ts_pll_enable = 1;
+
+ status = ice_write_cgu_reg_e822(hw, NAC_CGU_DWORD24, dw24.val);
+ if (status)
+ return status;
+
+ /* Wait to verify if the PLL locks */
+ ice_msec_delay(1, true);
+
+ status = ice_read_cgu_reg_e822(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+ if (status)
+ return status;
+
+ if (!bwm_lf.field.plllock_true_lock_cri) {
+ ice_warn(hw, "CGU PLL failed to lock\n");
+ return ICE_ERR_NOT_READY;
+ }
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.field.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw24.field.time_ref_sel),
+ ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+ bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+
+ return ICE_SUCCESS;
+}
+
+/**
+ * ice_init_cgu_e822 - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ */
+static enum ice_status ice_init_cgu_e822(struct ice_hw *hw)
+{
+ struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+ union tspll_cntr_bist_settings cntr_bist;
+ enum ice_status status;
+
+ status = ice_read_cgu_reg_e822(hw, TSPLL_CNTR_BIST_SETTINGS,
+ &cntr_bist.val);
+ if (status)
+ return status;
+
+ /* Disable sticky lock detection so lock status reported is accurate */
+ cntr_bist.field.i_plllock_sel_0 = 0;
+ cntr_bist.field.i_plllock_sel_1 = 0;
+
+ status = ice_write_cgu_reg_e822(hw, TSPLL_CNTR_BIST_SETTINGS,
+ cntr_bist.val);
+ if (status)
+ return status;
+
+ /* Configure the CGU PLL using the parameters from the function
+ * capabilities.
+ */
+ status = ice_cfg_cgu_pll_e822(hw, ts_info->time_ref,
+ (enum ice_clk_src)ts_info->clk_src);
+ if (status)
+ return status;
+
+ return ICE_SUCCESS;
+}
+
+/**
+ * ice_ptp_init_phc_e822 - Perform E822 specific PHC initialization
+ * @hw: pointer to HW struct
+ *
+ * Perform PHC initialization steps specific to E822 devices.
+ */
+static enum ice_status ice_ptp_init_phc_e822(struct ice_hw *hw)
+{
+ enum ice_status status;
+ u32 regval;
+
+ /* Enable reading switch and PHY registers over the sideband queue */
+#define PF_SB_REM_DEV_CTL_SWITCH_READ BIT(1)
+#define PF_SB_REM_DEV_CTL_PHY0 BIT(2)
+ regval = rd32(hw, PF_SB_REM_DEV_CTL);
+ regval |= (PF_SB_REM_DEV_CTL_SWITCH_READ |
+ PF_SB_REM_DEV_CTL_PHY0);
+ wr32(hw, PF_SB_REM_DEV_CTL, regval);
+
+ /* Initialize the Clock Generation Unit */
+ status = ice_init_cgu_e822(hw);
+ if (status)
+ return status;
+
+ /* Set window length for all the ports */
+ return ice_ptp_set_vernier_wl(hw);
+}
+
/**
* ice_ptp_prep_phy_time_e822 - Prepare PHY port with initial time
* @hw: pointer to the HW struct
return status;
}
+/**
+ * ice_ptp_init_phc_e810 - Perform E810 specific PHC initialization
+ * @hw: pointer to HW struct
+ *
+ * Perform E810-specific PTP hardware clock initialization steps.
+ */
+static enum ice_status ice_ptp_init_phc_e810(struct ice_hw *hw)
+{
+ /* Ensure synchronization delay is zero */
+ wr32(hw, GLTSYN_SYNC_DLAY, 0);
+
+ /* Initialize the PHY */
+ return ice_ptp_init_phy_e810(hw);
+}
+
/**
* ice_ptp_prep_phy_time_e810 - Prepare PHY port with initial time
* @hw: Board private structure
else
return ice_clear_phy_tstamp_e822(hw, block, idx);
}
+
+/**
+ * ice_ptp_init_phc - Initialize PTP hardware clock
+ * @hw: pointer to the HW struct
+ *
+ * Perform the steps required to initialize the PTP hardware clock.
+ */
+enum ice_status ice_ptp_init_phc(struct ice_hw *hw)
+{
+ u8 src_idx = hw->func_caps.ts_func_info.tmr_index_owned;
+
+ /* Enable source clocks */
+ wr32(hw, GLTSYN_ENA(src_idx), GLTSYN_ENA_TSYN_ENA_M);
+
+ /* Clear event status indications for auxiliary pins */
+ (void)rd32(hw, GLTSYN_STAT(src_idx));
+
+ if (ice_is_e810(hw))
+ return ice_ptp_init_phc_e810(hw);
+ else
+ return ice_ptp_init_phc_e822(hw);
+}