#define ADVERT_MASK (V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED) | \
FW_PORT_CAP32_ANEG)
+/**
+ * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
+ * @caps16: a 16-bit Port Capabilities value
+ *
+ * Returns the equivalent 32-bit Port Capabilities value.
+ */
+static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
+{
+ fw_port_cap32_t caps32 = 0;
+
+#define CAP16_TO_CAP32(__cap) \
+ do { \
+ if (caps16 & FW_PORT_CAP_##__cap) \
+ caps32 |= FW_PORT_CAP32_##__cap; \
+ } while (0)
+
+ CAP16_TO_CAP32(SPEED_100M);
+ CAP16_TO_CAP32(SPEED_1G);
+ CAP16_TO_CAP32(SPEED_25G);
+ CAP16_TO_CAP32(SPEED_10G);
+ CAP16_TO_CAP32(SPEED_40G);
+ CAP16_TO_CAP32(SPEED_100G);
+ CAP16_TO_CAP32(FC_RX);
+ CAP16_TO_CAP32(FC_TX);
+ CAP16_TO_CAP32(ANEG);
+ CAP16_TO_CAP32(MDIX);
+ CAP16_TO_CAP32(MDIAUTO);
+ CAP16_TO_CAP32(FEC_RS);
+ CAP16_TO_CAP32(FEC_BASER_RS);
+ CAP16_TO_CAP32(802_3_PAUSE);
+ CAP16_TO_CAP32(802_3_ASM_DIR);
+
+#undef CAP16_TO_CAP32
+
+ return caps32;
+}
+
/**
* fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
* @caps32: a 32-bit Port Capabilities value
struct link_config *lc)
{
unsigned int fw_mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
+ unsigned int fw_caps = adap->params.fw_caps_support;
fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap;
struct fw_port_cmd cmd;
F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
V_FW_PORT_CMD_PORTID(port));
cmd.action_to_len16 =
- cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
+ cpu_to_be32(V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ?
+ FW_PORT_ACTION_L1_CFG :
+ FW_PORT_ACTION_L1_CFG32) |
FW_LEN16(cmd));
- cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
+
+ if (fw_caps == FW_CAPS16)
+ cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
+ else
+ cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
return t4_wr_mbox(adap, mbox, &cmd, sizeof(cmd), NULL);
}
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
+/**
+ * t4_link_down_rc_str - return a string for a Link Down Reason Code
+ * @link_down_rc: Link Down Reason Code
+ *
+ * Returns a string representation of the Link Down Reason Code.
+ */
+static const char *t4_link_down_rc_str(unsigned char link_down_rc)
+{
+ static const char * const reason[] = {
+ "Link Down",
+ "Remote Fault",
+ "Auto-negotiation Failure",
+ "Reserved",
+ "Insufficient Airflow",
+ "Unable To Determine Reason",
+ "No RX Signal Detected",
+ "Reserved",
+ };
+
+ if (link_down_rc >= ARRAY_SIZE(reason))
+ return "Bad Reason Code";
+
+ return reason[link_down_rc];
+}
+
/* Return the highest speed set in the port capabilities, in Mb/s. */
static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
{
return 0;
}
+/**
+ * t4_handle_get_port_info - process a FW reply message
+ * @pi: the port info
+ * @rpl: start of the FW message
+ *
+ * Processes a GET_PORT_INFO FW reply message.
+ */
+static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
+{
+ const struct fw_port_cmd *cmd = (const void *)rpl;
+ int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(cmd->action_to_len16));
+ fw_port_cap32_t pcaps, acaps, linkattr;
+ struct link_config *lc = &pi->link_cfg;
+ struct adapter *adapter = pi->adapter;
+ enum fw_port_module_type mod_type;
+ enum fw_port_type port_type;
+ unsigned int speed, fc, fec;
+ int link_ok, linkdnrc;
+
+ /* Extract the various fields from the Port Information message.
+ */
+ switch (action) {
+ case FW_PORT_ACTION_GET_PORT_INFO: {
+ u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
+
+ link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS) != 0;
+ linkdnrc = G_FW_PORT_CMD_LINKDNRC(lstatus);
+ port_type = G_FW_PORT_CMD_PTYPE(lstatus);
+ mod_type = G_FW_PORT_CMD_MODTYPE(lstatus);
+ pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
+ acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
+
+ /* Unfortunately the format of the Link Status in the old
+ * 16-bit Port Information message isn't the same as the
+ * 16-bit Port Capabilities bitfield used everywhere else ...
+ */
+ linkattr = 0;
+ if (lstatus & F_FW_PORT_CMD_RXPAUSE)
+ linkattr |= FW_PORT_CAP32_FC_RX;
+ if (lstatus & F_FW_PORT_CMD_TXPAUSE)
+ linkattr |= FW_PORT_CAP32_FC_TX;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
+ linkattr |= FW_PORT_CAP32_SPEED_100M;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
+ linkattr |= FW_PORT_CAP32_SPEED_1G;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
+ linkattr |= FW_PORT_CAP32_SPEED_10G;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G))
+ linkattr |= FW_PORT_CAP32_SPEED_25G;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
+ linkattr |= FW_PORT_CAP32_SPEED_40G;
+ if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G))
+ linkattr |= FW_PORT_CAP32_SPEED_100G;
+
+ break;
+ }
+
+ case FW_PORT_ACTION_GET_PORT_INFO32: {
+ u32 lstatus32 =
+ be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
+
+ link_ok = (lstatus32 & F_FW_PORT_CMD_LSTATUS32) != 0;
+ linkdnrc = G_FW_PORT_CMD_LINKDNRC32(lstatus32);
+ port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
+ mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus32);
+ pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
+ acaps = be32_to_cpu(cmd->u.info32.acaps32);
+ linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
+ break;
+ }
+
+ default:
+ dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n",
+ be32_to_cpu(cmd->action_to_len16));
+ return;
+ }
+
+ fec = fwcap_to_cc_fec(acaps);
+
+ fc = fwcap_to_cc_pause(linkattr);
+ speed = fwcap_to_speed(linkattr);
+
+ if (mod_type != pi->mod_type) {
+ lc->auto_fec = fec;
+ pi->port_type = port_type;
+ pi->mod_type = mod_type;
+ t4_os_portmod_changed(adapter, pi->port_id);
+ }
+ if (link_ok != lc->link_ok || speed != lc->speed ||
+ fc != lc->fc || fec != lc->fec) { /* something changed */
+ if (!link_ok && lc->link_ok) {
+ lc->link_down_rc = linkdnrc;
+ dev_warn(adap, "Port %d link down, reason: %s\n",
+ pi->tx_chan, t4_link_down_rc_str(linkdnrc));
+ }
+ lc->link_ok = link_ok;
+ lc->speed = speed;
+ lc->fc = fc;
+ lc->fec = fec;
+ lc->pcaps = pcaps;
+ lc->acaps = acaps & ADVERT_MASK;
+
+ if (lc->acaps & FW_PORT_CAP32_ANEG) {
+ lc->autoneg = AUTONEG_ENABLE;
+ } else {
+ /* When Autoneg is disabled, user needs to set
+ * single speed.
+ * Similar to cxgb4_ethtool.c: set_link_ksettings
+ */
+ lc->acaps = 0;
+ lc->requested_speed = fwcap_to_speed(acaps);
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+ }
+}
+
/**
* t4_handle_fw_rpl - process a FW reply message
* @adap: the adapter
unsigned int action =
G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16));
- if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) {
+ if (opcode == FW_PORT_CMD &&
+ (action == FW_PORT_ACTION_GET_PORT_INFO ||
+ action == FW_PORT_ACTION_GET_PORT_INFO32)) {
/* link/module state change message */
- unsigned int speed = 0, fc = 0, i;
int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
struct port_info *pi = NULL;
- struct link_config *lc;
- u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype);
- int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0;
- u32 mod = G_FW_PORT_CMD_MODTYPE(stat);
- unsigned int fec;
-
- fc = fwcap_to_cc_pause(stat);
- fec = fwcap_to_cc_fec(stat);
-
- if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
- speed = ETH_SPEED_NUM_100M;
- else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
- speed = ETH_SPEED_NUM_1G;
- else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
- speed = ETH_SPEED_NUM_10G;
- else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G))
- speed = ETH_SPEED_NUM_25G;
- else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
- speed = ETH_SPEED_NUM_40G;
- else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G))
- speed = ETH_SPEED_NUM_100G;
+ int i;
for_each_port(adap, i) {
pi = adap2pinfo(adap, i);
if (pi->tx_chan == chan)
break;
}
- lc = &pi->link_cfg;
- if (mod != pi->mod_type) {
- lc->auto_fec = fec;
- pi->mod_type = mod;
- t4_os_portmod_changed(adap, i);
- }
- if (link_ok != lc->link_ok || speed != lc->speed ||
- fc != lc->fc || fec != lc->fec) { /* something changed */
- if (!link_ok && lc->link_ok) {
- static const char * const reason[] = {
- "Link Down",
- "Remote Fault",
- "Auto-negotiation Failure",
- "Reserved",
- "Insufficient Airflow",
- "Unable To Determine Reason",
- "No RX Signal Detected",
- "Reserved",
- };
- unsigned int rc = G_FW_PORT_CMD_LINKDNRC(stat);
-
- dev_warn(adap, "Port %d link down, reason: %s\n",
- chan, reason[rc]);
- }
- lc->link_ok = link_ok;
- lc->speed = speed;
- lc->fc = fc;
- lc->fec = fec;
- lc->pcaps = be16_to_cpu(p->u.info.pcap);
- lc->acaps = be16_to_cpu(p->u.info.acap) & ADVERT_MASK;
- if (lc->acaps & FW_PORT_CAP32_ANEG) {
- lc->autoneg = AUTONEG_ENABLE;
- } else {
- /* When Autoneg is disabled, user needs to set
- * single speed.
- */
- lc->acaps = 0;
- lc->requested_speed =
- be16_to_cpu(p->u.info.acap);
- lc->requested_speed =
- fwcap_to_speed(lc->requested_speed);
- lc->autoneg = AUTONEG_DISABLE;
- }
- }
+ t4_handle_get_port_info(pi, rpl);
} else {
dev_warn(adap, "Unknown firmware reply %d\n", opcode);
return -EINVAL;
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
-static void init_link_config(struct link_config *lc, unsigned int pcaps,
- unsigned int acaps)
+static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
+ fw_port_cap32_t acaps)
{
lc->pcaps = pcaps;
lc->requested_speed = 0;
int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
{
- u8 addr[6];
+ unsigned int fw_caps = adap->params.fw_caps_support;
+ fw_port_cap32_t pcaps, acaps;
+ enum fw_port_type port_type;
+ struct fw_port_cmd cmd;
int ret, i, j = 0;
- struct fw_port_cmd c;
+ int mdio_addr;
+ u32 action;
+ u8 addr[6];
- memset(&c, 0, sizeof(c));
+ memset(&cmd, 0, sizeof(cmd));
for_each_port(adap, i) {
+ struct port_info *pi = adap2pinfo(adap, i);
unsigned int rss_size = 0;
- struct port_info *p = adap2pinfo(adap, i);
while ((adap->params.portvec & (1 << j)) == 0)
j++;
- c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
- F_FW_CMD_REQUEST | F_FW_CMD_READ |
- V_FW_PORT_CMD_PORTID(j));
- c.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(
- FW_PORT_ACTION_GET_PORT_INFO) |
- FW_LEN16(c));
- ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ /* If we haven't yet determined whether we're talking to
+ * Firmware which knows the new 32-bit Port Capabilities, it's
+ * time to find out now. This will also tell new Firmware to
+ * send us Port Status Updates using the new 32-bit Port
+ * Capabilities version of the Port Information message.
+ */
+ if (fw_caps == FW_CAPS_UNKNOWN) {
+ u32 param, val, caps;
+
+ caps = FW_PARAMS_PARAM_PFVF_PORT_CAPS32;
+ param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
+ V_FW_PARAMS_PARAM_X(caps));
+ val = 1;
+ ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m,
+ &val);
+ fw_caps = ret == 0 ? FW_CAPS32 : FW_CAPS16;
+ adap->params.fw_caps_support = fw_caps;
+ }
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
+ F_FW_CMD_REQUEST |
+ F_FW_CMD_READ |
+ V_FW_PORT_CMD_PORTID(j));
+ action = fw_caps == FW_CAPS16 ? FW_PORT_ACTION_GET_PORT_INFO :
+ FW_PORT_ACTION_GET_PORT_INFO32;
+ cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) |
+ FW_LEN16(cmd));
+ ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
if (ret)
return ret;
+ /* Extract the various fields from the Port Information message.
+ */
+ if (fw_caps == FW_CAPS16) {
+ u32 lstatus =
+ be32_to_cpu(cmd.u.info.lstatus_to_modtype);
+
+ port_type = G_FW_PORT_CMD_PTYPE(lstatus);
+ mdio_addr = (lstatus & F_FW_PORT_CMD_MDIOCAP) ?
+ (int)G_FW_PORT_CMD_MDIOADDR(lstatus) : -1;
+ pcaps = be16_to_cpu(cmd.u.info.pcap);
+ acaps = be16_to_cpu(cmd.u.info.acap);
+ pcaps = fwcaps16_to_caps32(pcaps);
+ acaps = fwcaps16_to_caps32(acaps);
+ } else {
+ u32 lstatus32 =
+ be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
+
+ port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
+ mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
+ (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) :
+ -1;
+ pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
+ acaps = be32_to_cpu(cmd.u.info32.acaps32);
+ }
+
ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size);
if (ret < 0)
return ret;
- p->viid = ret;
- p->tx_chan = j;
- p->rss_size = rss_size;
+ pi->viid = ret;
+ pi->tx_chan = j;
+ pi->rss_size = rss_size;
t4_os_set_hw_addr(adap, i, addr);
- ret = be32_to_cpu(c.u.info.lstatus_to_modtype);
- p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ?
- G_FW_PORT_CMD_MDIOADDR(ret) : -1;
- p->port_type = G_FW_PORT_CMD_PTYPE(ret);
- p->mod_type = FW_PORT_MOD_TYPE_NA;
+ pi->port_type = port_type;
+ pi->mdio_addr = mdio_addr;
+ pi->mod_type = FW_PORT_MOD_TYPE_NA;
- init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap),
- be16_to_cpu(c.u.info.acap));
+ init_link_config(&pi->link_cfg, pcaps, acaps);
j++;
}
return 0;