net/octeontx2: configure TM HW resources
authorNithin Dabilpuram <ndabilpuram@marvell.com>
Sun, 26 May 2019 16:49:40 +0000 (22:19 +0530)
committerFerruh Yigit <ferruh.yigit@intel.com>
Thu, 4 Jul 2019 23:52:01 +0000 (01:52 +0200)
This patch sets up and configure hierarchy in hw
nodes. Since all the registers are with RVU AF,
register configuration is also done using mbox
communication.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
drivers/net/octeontx2/otx2_tm.c
drivers/net/octeontx2/otx2_tm.h

index 91f31df..c6154e4 100644 (file)
@@ -20,6 +20,41 @@ enum otx2_tm_node_level {
        OTX2_TM_LVL_MAX,
 };
 
+static inline
+uint64_t shaper2regval(struct shaper_params *shaper)
+{
+       return (shaper->burst_exponent << 37) | (shaper->burst_mantissa << 29) |
+               (shaper->div_exp << 13) | (shaper->exponent << 9) |
+               (shaper->mantissa << 1);
+}
+
+static int
+nix_get_link(struct otx2_eth_dev *dev)
+{
+       int link = 13 /* SDP */;
+       uint16_t lmac_chan;
+       uint16_t map;
+
+       lmac_chan = dev->tx_chan_base;
+
+       /* CGX lmac link */
+       if (lmac_chan >= 0x800) {
+               map = lmac_chan & 0x7FF;
+               link = 4 * ((map >> 8) & 0xF) + ((map >> 4) & 0xF);
+       } else if (lmac_chan < 0x700) {
+               /* LBK channel */
+               link = 12;
+       }
+
+       return link;
+}
+
+static uint8_t
+nix_get_relchan(struct otx2_eth_dev *dev)
+{
+       return dev->tx_chan_base & 0xff;
+}
+
 static bool
 nix_tm_have_tl1_access(struct otx2_eth_dev *dev)
 {
@@ -28,6 +63,24 @@ nix_tm_have_tl1_access(struct otx2_eth_dev *dev)
                !is_lbk && !dev->maxvf;
 }
 
+static int
+find_prio_anchor(struct otx2_eth_dev *dev, uint32_t node_id)
+{
+       struct otx2_nix_tm_node *child_node;
+
+       TAILQ_FOREACH(child_node, &dev->node_list, node) {
+               if (!child_node->parent)
+                       continue;
+               if (!(child_node->parent->id == node_id))
+                       continue;
+               if (child_node->priority == child_node->parent->rr_prio)
+                       continue;
+               return child_node->hw_id - child_node->priority;
+       }
+       return 0;
+}
+
+
 static struct otx2_nix_tm_shaper_profile *
 nix_tm_shaper_profile_search(struct otx2_eth_dev *dev, uint32_t shaper_id)
 {
@@ -40,6 +93,451 @@ nix_tm_shaper_profile_search(struct otx2_eth_dev *dev, uint32_t shaper_id)
        return NULL;
 }
 
+static inline uint64_t
+shaper_rate_to_nix(uint64_t cclk_hz, uint64_t cclk_ticks,
+                  uint64_t value, uint64_t *exponent_p,
+                  uint64_t *mantissa_p, uint64_t *div_exp_p)
+{
+       uint64_t div_exp, exponent, mantissa;
+
+       /* Boundary checks */
+       if (value < MIN_SHAPER_RATE(cclk_hz, cclk_ticks) ||
+           value > MAX_SHAPER_RATE(cclk_hz, cclk_ticks))
+               return 0;
+
+       if (value <= SHAPER_RATE(cclk_hz, cclk_ticks, 0, 0, 0)) {
+               /* Calculate rate div_exp and mantissa using
+                * the following formula:
+                *
+                * value = (cclk_hz * (256 + mantissa)
+                *              / ((cclk_ticks << div_exp) * 256)
+                */
+               div_exp = 0;
+               exponent = 0;
+               mantissa = MAX_RATE_MANTISSA;
+
+               while (value < (cclk_hz / (cclk_ticks << div_exp)))
+                       div_exp += 1;
+
+               while (value <
+                      ((cclk_hz * (256 + mantissa)) /
+                       ((cclk_ticks << div_exp) * 256)))
+                       mantissa -= 1;
+       } else {
+               /* Calculate rate exponent and mantissa using
+                * the following formula:
+                *
+                * value = (cclk_hz * ((256 + mantissa) << exponent)
+                *              / (cclk_ticks * 256)
+                *
+                */
+               div_exp = 0;
+               exponent = MAX_RATE_EXPONENT;
+               mantissa = MAX_RATE_MANTISSA;
+
+               while (value < (cclk_hz * (1 << exponent)) / cclk_ticks)
+                       exponent -= 1;
+
+               while (value < (cclk_hz * ((256 + mantissa) << exponent)) /
+                      (cclk_ticks * 256))
+                       mantissa -= 1;
+       }
+
+       if (div_exp > MAX_RATE_DIV_EXP ||
+           exponent > MAX_RATE_EXPONENT || mantissa > MAX_RATE_MANTISSA)
+               return 0;
+
+       if (div_exp_p)
+               *div_exp_p = div_exp;
+       if (exponent_p)
+               *exponent_p = exponent;
+       if (mantissa_p)
+               *mantissa_p = mantissa;
+
+       /* Calculate real rate value */
+       return SHAPER_RATE(cclk_hz, cclk_ticks, exponent, mantissa, div_exp);
+}
+
+static inline uint64_t
+lx_shaper_rate_to_nix(uint64_t cclk_hz, uint32_t hw_lvl,
+                     uint64_t value, uint64_t *exponent,
+                     uint64_t *mantissa, uint64_t *div_exp)
+{
+       if (hw_lvl == NIX_TXSCH_LVL_TL1)
+               return shaper_rate_to_nix(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS,
+                                         value, exponent, mantissa, div_exp);
+       else
+               return shaper_rate_to_nix(cclk_hz, LX_TIME_WHEEL_CCLK_TICKS,
+                                         value, exponent, mantissa, div_exp);
+}
+
+static inline uint64_t
+shaper_burst_to_nix(uint64_t value, uint64_t *exponent_p,
+                   uint64_t *mantissa_p)
+{
+       uint64_t exponent, mantissa;
+
+       if (value < MIN_SHAPER_BURST || value > MAX_SHAPER_BURST)
+               return 0;
+
+       /* Calculate burst exponent and mantissa using
+        * the following formula:
+        *
+        * value = (((256 + mantissa) << (exponent + 1)
+        / 256)
+        *
+        */
+       exponent = MAX_BURST_EXPONENT;
+       mantissa = MAX_BURST_MANTISSA;
+
+       while (value < (1ull << (exponent + 1)))
+               exponent -= 1;
+
+       while (value < ((256 + mantissa) << (exponent + 1)) / 256)
+               mantissa -= 1;
+
+       if (exponent > MAX_BURST_EXPONENT || mantissa > MAX_BURST_MANTISSA)
+               return 0;
+
+       if (exponent_p)
+               *exponent_p = exponent;
+       if (mantissa_p)
+               *mantissa_p = mantissa;
+
+       return SHAPER_BURST(exponent, mantissa);
+}
+
+static int
+configure_shaper_cir_pir_reg(struct otx2_eth_dev *dev,
+                            struct otx2_nix_tm_node *tm_node,
+                            struct shaper_params *cir,
+                            struct shaper_params *pir)
+{
+       uint32_t shaper_profile_id = RTE_TM_SHAPER_PROFILE_ID_NONE;
+       struct otx2_nix_tm_shaper_profile *shaper_profile = NULL;
+       struct rte_tm_shaper_params *param;
+
+       shaper_profile_id = tm_node->params.shaper_profile_id;
+
+       shaper_profile = nix_tm_shaper_profile_search(dev, shaper_profile_id);
+       if (shaper_profile) {
+               param = &shaper_profile->profile;
+               /* Calculate CIR exponent and mantissa */
+               if (param->committed.rate)
+                       cir->rate = lx_shaper_rate_to_nix(CCLK_HZ,
+                                                         tm_node->hw_lvl_id,
+                                                         param->committed.rate,
+                                                         &cir->exponent,
+                                                         &cir->mantissa,
+                                                         &cir->div_exp);
+
+               /* Calculate PIR exponent and mantissa */
+               if (param->peak.rate)
+                       pir->rate = lx_shaper_rate_to_nix(CCLK_HZ,
+                                                         tm_node->hw_lvl_id,
+                                                         param->peak.rate,
+                                                         &pir->exponent,
+                                                         &pir->mantissa,
+                                                         &pir->div_exp);
+
+               /* Calculate CIR burst exponent and mantissa */
+               if (param->committed.size)
+                       cir->burst = shaper_burst_to_nix(param->committed.size,
+                                                        &cir->burst_exponent,
+                                                        &cir->burst_mantissa);
+
+               /* Calculate PIR burst exponent and mantissa */
+               if (param->peak.size)
+                       pir->burst = shaper_burst_to_nix(param->peak.size,
+                                                        &pir->burst_exponent,
+                                                        &pir->burst_mantissa);
+       }
+
+       return 0;
+}
+
+static int
+send_tm_reqval(struct otx2_mbox *mbox, struct nix_txschq_config *req)
+{
+       int rc;
+
+       if (req->num_regs > MAX_REGS_PER_MBOX_MSG)
+               return -ERANGE;
+
+       rc = otx2_mbox_process(mbox);
+       if (rc)
+               return rc;
+
+       req->num_regs = 0;
+       return 0;
+}
+
+static int
+populate_tm_registers(struct otx2_eth_dev *dev,
+                     struct otx2_nix_tm_node *tm_node)
+{
+       uint64_t strict_schedul_prio, rr_prio;
+       struct otx2_mbox *mbox = dev->mbox;
+       volatile uint64_t *reg, *regval;
+       uint64_t parent = 0, child = 0;
+       struct shaper_params cir, pir;
+       struct nix_txschq_config *req;
+       uint64_t rr_quantum;
+       uint32_t hw_lvl;
+       uint32_t schq;
+       int rc;
+
+       memset(&cir, 0, sizeof(cir));
+       memset(&pir, 0, sizeof(pir));
+
+       /* Skip leaf nodes */
+       if (tm_node->hw_lvl_id == NIX_TXSCH_LVL_CNT)
+               return 0;
+
+       /* Root node will not have a parent node */
+       if (tm_node->hw_lvl_id == dev->otx2_tm_root_lvl)
+               parent = tm_node->parent_hw_id;
+       else
+               parent = tm_node->parent->hw_id;
+
+       /* Do we need this trigger to configure TL1 */
+       if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2 &&
+           tm_node->hw_lvl_id == dev->otx2_tm_root_lvl) {
+               schq = parent;
+               /*
+                * Default config for TL1.
+                * For VF this is always ignored.
+                */
+
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = NIX_TXSCH_LVL_TL1;
+
+               /* Set DWRR quantum */
+               req->reg[0] = NIX_AF_TL1X_SCHEDULE(schq);
+               req->regval[0] = TXSCH_TL1_DFLT_RR_QTM;
+               req->num_regs++;
+
+               req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq);
+               req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1);
+               req->num_regs++;
+
+               req->reg[2] = NIX_AF_TL1X_CIR(schq);
+               req->regval[2] = 0;
+               req->num_regs++;
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+       }
+
+       if (tm_node->hw_lvl_id != NIX_TXSCH_LVL_SMQ)
+               child = find_prio_anchor(dev, tm_node->id);
+
+       rr_prio = tm_node->rr_prio;
+       hw_lvl = tm_node->hw_lvl_id;
+       strict_schedul_prio = tm_node->priority;
+       schq = tm_node->hw_id;
+       rr_quantum = (tm_node->weight * NIX_TM_RR_QUANTUM_MAX) /
+               MAX_SCHED_WEIGHT;
+
+       configure_shaper_cir_pir_reg(dev, tm_node, &cir, &pir);
+
+       otx2_tm_dbg("Configure node %p, lvl %u hw_lvl %u, id %u, hw_id %u,"
+                    "parent_hw_id %" PRIx64 ", pir %" PRIx64 ", cir %" PRIx64,
+                    tm_node, tm_node->level_id, hw_lvl,
+                    tm_node->id, schq, parent, pir.rate, cir.rate);
+
+       rc = -EFAULT;
+
+       switch (hw_lvl) {
+       case NIX_TXSCH_LVL_SMQ:
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = hw_lvl;
+               reg = req->reg;
+               regval = req->regval;
+               req->num_regs = 0;
+
+               /* Set xoff which will be cleared later */
+               *reg++ = NIX_AF_SMQX_CFG(schq);
+               *regval++ = BIT_ULL(50) | ((uint64_t)NIX_MAX_VTAG_INS << 36) |
+                               (NIX_MAX_HW_FRS << 8) | NIX_MIN_HW_FRS;
+               req->num_regs++;
+               *reg++ = NIX_AF_MDQX_PARENT(schq);
+               *regval++ = parent << 16;
+               req->num_regs++;
+               *reg++ = NIX_AF_MDQX_SCHEDULE(schq);
+               *regval++ = (strict_schedul_prio << 24) | rr_quantum;
+               req->num_regs++;
+               if (pir.rate && pir.burst) {
+                       *reg++ = NIX_AF_MDQX_PIR(schq);
+                       *regval++ = shaper2regval(&pir) | 1;
+                       req->num_regs++;
+               }
+
+               if (cir.rate && cir.burst) {
+                       *reg++ = NIX_AF_MDQX_CIR(schq);
+                       *regval++ = shaper2regval(&cir) | 1;
+                       req->num_regs++;
+               }
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+               break;
+       case NIX_TXSCH_LVL_TL4:
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = hw_lvl;
+               req->num_regs = 0;
+               reg = req->reg;
+               regval = req->regval;
+
+               *reg++ = NIX_AF_TL4X_PARENT(schq);
+               *regval++ = parent << 16;
+               req->num_regs++;
+               *reg++ = NIX_AF_TL4X_TOPOLOGY(schq);
+               *regval++ = (child << 32) | (rr_prio << 1);
+               req->num_regs++;
+               *reg++ = NIX_AF_TL4X_SCHEDULE(schq);
+               *regval++ = (strict_schedul_prio << 24) | rr_quantum;
+               req->num_regs++;
+               if (pir.rate && pir.burst) {
+                       *reg++ = NIX_AF_TL4X_PIR(schq);
+                       *regval++ = shaper2regval(&pir) | 1;
+                       req->num_regs++;
+               }
+               if (cir.rate && cir.burst) {
+                       *reg++ = NIX_AF_TL4X_CIR(schq);
+                       *regval++ = shaper2regval(&cir) | 1;
+                       req->num_regs++;
+               }
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+               break;
+       case NIX_TXSCH_LVL_TL3:
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = hw_lvl;
+               req->num_regs = 0;
+               reg = req->reg;
+               regval = req->regval;
+
+               *reg++ = NIX_AF_TL3X_PARENT(schq);
+               *regval++ = parent << 16;
+               req->num_regs++;
+               *reg++ = NIX_AF_TL3X_TOPOLOGY(schq);
+               *regval++ = (child << 32) | (rr_prio << 1);
+               req->num_regs++;
+               *reg++ = NIX_AF_TL3X_SCHEDULE(schq);
+               *regval++ = (strict_schedul_prio << 24) | rr_quantum;
+               req->num_regs++;
+               if (pir.rate && pir.burst) {
+                       *reg++ = NIX_AF_TL3X_PIR(schq);
+                       *regval++ = shaper2regval(&pir) | 1;
+                       req->num_regs++;
+               }
+               if (cir.rate && cir.burst) {
+                       *reg++ = NIX_AF_TL3X_CIR(schq);
+                       *regval++ = shaper2regval(&cir) | 1;
+                       req->num_regs++;
+               }
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+               break;
+       case NIX_TXSCH_LVL_TL2:
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = hw_lvl;
+               req->num_regs = 0;
+               reg = req->reg;
+               regval = req->regval;
+
+               *reg++ = NIX_AF_TL2X_PARENT(schq);
+               *regval++ = parent << 16;
+               req->num_regs++;
+               *reg++ = NIX_AF_TL2X_TOPOLOGY(schq);
+               *regval++ = (child << 32) | (rr_prio << 1);
+               req->num_regs++;
+               *reg++ = NIX_AF_TL2X_SCHEDULE(schq);
+               if (dev->otx2_tm_root_lvl == NIX_TXSCH_LVL_TL2)
+                       *regval++ = (1 << 24) | rr_quantum;
+               else
+                       *regval++ = (strict_schedul_prio << 24) | rr_quantum;
+               req->num_regs++;
+               *reg++ = NIX_AF_TL3_TL2X_LINKX_CFG(schq, nix_get_link(dev));
+               *regval++ = BIT_ULL(12) | nix_get_relchan(dev);
+               req->num_regs++;
+               if (pir.rate && pir.burst) {
+                       *reg++ = NIX_AF_TL2X_PIR(schq);
+                       *regval++ = shaper2regval(&pir) | 1;
+                       req->num_regs++;
+               }
+               if (cir.rate && cir.burst) {
+                       *reg++ = NIX_AF_TL2X_CIR(schq);
+                       *regval++ = shaper2regval(&cir) | 1;
+                       req->num_regs++;
+               }
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+               break;
+       case NIX_TXSCH_LVL_TL1:
+               req = otx2_mbox_alloc_msg_nix_txschq_cfg(mbox);
+               req->lvl = hw_lvl;
+               req->num_regs = 0;
+               reg = req->reg;
+               regval = req->regval;
+
+               *reg++ = NIX_AF_TL1X_SCHEDULE(schq);
+               *regval++ = rr_quantum;
+               req->num_regs++;
+               *reg++ = NIX_AF_TL1X_TOPOLOGY(schq);
+               *regval++ = (child << 32) | (rr_prio << 1 /*RR_PRIO*/);
+               req->num_regs++;
+               if (cir.rate && cir.burst) {
+                       *reg++ = NIX_AF_TL1X_CIR(schq);
+                       *regval++ = shaper2regval(&cir) | 1;
+                       req->num_regs++;
+               }
+
+               rc = send_tm_reqval(mbox, req);
+               if (rc)
+                       goto error;
+               break;
+       }
+
+       return 0;
+error:
+       otx2_err("Txschq cfg request failed for node %p, rc=%d", tm_node, rc);
+       return rc;
+}
+
+
+static int
+nix_tm_txsch_reg_config(struct otx2_eth_dev *dev)
+{
+       struct otx2_nix_tm_node *tm_node;
+       uint32_t lvl;
+       int rc = 0;
+
+       if (nix_get_link(dev) == 13)
+               return -EPERM;
+
+       for (lvl = 0; lvl < (uint32_t)dev->otx2_tm_root_lvl + 1; lvl++) {
+               TAILQ_FOREACH(tm_node, &dev->node_list, node) {
+                       if (tm_node->hw_lvl_id == lvl) {
+                               rc = populate_tm_registers(dev, tm_node);
+                               if (rc)
+                                       goto exit;
+                       }
+               }
+       }
+exit:
+       return rc;
+}
+
 static struct otx2_nix_tm_node *
 nix_tm_node_search(struct otx2_eth_dev *dev,
                   uint32_t node_id, bool user)
@@ -443,6 +941,12 @@ nix_tm_alloc_resources(struct rte_eth_dev *eth_dev, bool xmit_enable)
                return rc;
        }
 
+       rc = nix_tm_txsch_reg_config(dev);
+       if (rc) {
+               otx2_err("TM failed to configure sched registers=%d", rc);
+               return rc;
+       }
+
        return 0;
 }
 
index 94023fa..af1bb18 100644 (file)
@@ -64,4 +64,86 @@ TAILQ_HEAD(otx2_nix_tm_shaper_profile_list, otx2_nix_tm_shaper_profile);
 /* = NIX_MAX_HW_MTU */
 #define DEFAULT_RR_WEIGHT 71
 
+/** NIX rate limits */
+#define MAX_RATE_DIV_EXP 12
+#define MAX_RATE_EXPONENT 0xf
+#define MAX_RATE_MANTISSA 0xff
+
+/** NIX rate limiter time-wheel resolution */
+#define L1_TIME_WHEEL_CCLK_TICKS 240
+#define LX_TIME_WHEEL_CCLK_TICKS 860
+
+#define CCLK_HZ 1000000000
+
+/* NIX rate calculation
+ *     CCLK = coprocessor-clock frequency in MHz
+ *     CCLK_TICKS = rate limiter time-wheel resolution
+ *
+ *     PIR_ADD = ((256 + NIX_*_PIR[RATE_MANTISSA])
+ *             << NIX_*_PIR[RATE_EXPONENT]) / 256
+ *     PIR = (CCLK / (CCLK_TICKS << NIX_*_PIR[RATE_DIVIDER_EXPONENT]))
+ *             * PIR_ADD
+ *
+ *     CIR_ADD = ((256 + NIX_*_CIR[RATE_MANTISSA])
+ *             << NIX_*_CIR[RATE_EXPONENT]) / 256
+ *     CIR = (CCLK / (CCLK_TICKS << NIX_*_CIR[RATE_DIVIDER_EXPONENT]))
+ *             * CIR_ADD
+ */
+#define SHAPER_RATE(cclk_hz, cclk_ticks, \
+                       exponent, mantissa, div_exp) \
+       (((uint64_t)(cclk_hz) * ((256 + (mantissa)) << (exponent))) \
+               / (((cclk_ticks) << (div_exp)) * 256))
+
+#define L1_SHAPER_RATE(cclk_hz, exponent, mantissa, div_exp) \
+       SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS, \
+                       exponent, mantissa, div_exp)
+
+#define LX_SHAPER_RATE(cclk_hz, exponent, mantissa, div_exp) \
+       SHAPER_RATE(cclk_hz, LX_TIME_WHEEL_CCLK_TICKS, \
+                       exponent, mantissa, div_exp)
+
+/* Shaper rate limits */
+#define MIN_SHAPER_RATE(cclk_hz, cclk_ticks) \
+       SHAPER_RATE(cclk_hz, cclk_ticks, 0, 0, MAX_RATE_DIV_EXP)
+
+#define MAX_SHAPER_RATE(cclk_hz, cclk_ticks) \
+       SHAPER_RATE(cclk_hz, cclk_ticks, MAX_RATE_EXPONENT, \
+                       MAX_RATE_MANTISSA, 0)
+
+#define MIN_L1_SHAPER_RATE(cclk_hz) \
+       MIN_SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS)
+
+#define MAX_L1_SHAPER_RATE(cclk_hz) \
+       MAX_SHAPER_RATE(cclk_hz, L1_TIME_WHEEL_CCLK_TICKS)
+
+/** TM Shaper - low level operations */
+
+/** NIX burst limits */
+#define MAX_BURST_EXPONENT 0xf
+#define MAX_BURST_MANTISSA 0xff
+
+/* NIX burst calculation
+ *     PIR_BURST = ((256 + NIX_*_PIR[BURST_MANTISSA])
+ *             << (NIX_*_PIR[BURST_EXPONENT] + 1))
+ *                     / 256
+ *
+ *     CIR_BURST = ((256 + NIX_*_CIR[BURST_MANTISSA])
+ *             << (NIX_*_CIR[BURST_EXPONENT] + 1))
+ *                     / 256
+ */
+#define SHAPER_BURST(exponent, mantissa) \
+       (((256 + (mantissa)) << ((exponent) + 1)) / 256)
+
+/** Shaper burst limits */
+#define MIN_SHAPER_BURST \
+       SHAPER_BURST(0, 0)
+
+#define MAX_SHAPER_BURST \
+       SHAPER_BURST(MAX_BURST_EXPONENT,\
+               MAX_BURST_MANTISSA)
+
+/* Default TL1 priority and Quantum from AF */
+#define TXSCH_TL1_DFLT_RR_QTM  ((1 << 24) - 1)
+#define TXSCH_TL1_DFLT_RR_PRIO 1
+
 #endif /* __OTX2_TM_H__ */