static uint8_t portval;
static uint8_t rxidx;
+static uint8_t icp_idx = NB_SERVO;
+static uint16_t icp_servos[NB_SERVO];
+static uint16_t icp_prev;
+
#define BYPASS_ENABLE 14
#define BYPASS_DISABLE 15
rxidx ^= 1;
}
+static void poll_input_capture(void)
+{
+ uint16_t icp, diff;
+ uint8_t rising;
+
+ /* no new sample, return */
+ if ((TIFR1 & _BV(ICF1)) == 0)
+ return;
+
+ sei();
+ icp = ICR1;
+ cli();
+
+ rising = TCCR1B & _BV(ICES1);
+
+ /* change the edge type */
+ TCCR1B ^= _BV(ICES1);
+
+ /* clear the flag */
+ TIFR1 = TIFR1 | _BV(ICF1);
+
+ diff = icp - icp_prev;
+ icp_prev = icp;
+
+ /* a rising edge with at least 2ms of state 0 means that we
+ * get the first servo */
+ if (rising == 1 && diff > 2000) {
+ icp_idx = 0;
+ return;
+ }
+
+ /* get the value for the servo */
+ if (rising == 0 && icp_idx < NB_SERVO) {
+ if (diff < 1000)
+ icp_servos[icp_idx] = 0;
+ else
+ icp_servos[icp_idx] = diff - 1000;
+ icp_idx++;
+ }
+}
+
+static void poll(void)
+{
+ poll_spi();
+ poll_input_capture();
+}
+
static void load_timer_at(uint16_t t)
{
OCR1A = t;
t = TCNT1;
load_timer_at(t + 20);
while (done == 0)
- poll_spi();
+ poll();
/* reset bit */
done = 0;
//portval = PORTC & (~(1 << s->bit));
load_timer_at(t + 20 + 1000 + s->command);
while (done == 0)
- poll_spi();
+ poll();
}
int main(void)
/* servo outputs PD2-PD7 */
DDRD = 0xfc;
- /* start timer1 at clk/8 (1Mhz) */
+ /* start timer1 at clk/8 (1Mhz), enable noise canceler on
+ * input capture, capture rising edge */
TCNT1 = 0;
- TCCR1B = _BV(CS11);
+ TCCR1B = _BV(CS11) | _BV(ICNC1) | _BV(ICES1);
/* start timer0 at clk/1024 (~8Khz) */
TCNT0 = 0;
diff = TCNT0 - t;
if (diff >= 160)
break;
- poll_spi();
+ poll();
}
/* bypass mode */
if (bypass == 1) {
tmp &= 0x3f;
tmp <<= 2;
PORTD = tmp;
- poll_spi();
+ poll();
}
LED_OFF();
}