net/ice: fix check for QoS in DCF
authorTing Xu <ting.xu@intel.com>
Thu, 8 Jul 2021 02:32:25 +0000 (10:32 +0800)
committerQi Zhang <qi.z.zhang@intel.com>
Fri, 9 Jul 2021 03:05:19 +0000 (05:05 +0200)
This patch fixed some unreasonable error check. Move all checks into one
helper function before configuring. Skip the check for DCF (VF0).

Fixes: 3a6bfc37eaf4 ("net/ice: support QoS config VF bandwidth in DCF")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
drivers/net/ice/ice_dcf_sched.c

index aeb1afb..8a0529a 100644 (file)
@@ -631,6 +631,43 @@ ice_dcf_validate_tc_bw(struct virtchnl_dcf_bw_cfg_list *tc_bw,
 
        return 0;
 }
+
+static int ice_dcf_commit_check(struct ice_dcf_hw *hw)
+{
+       struct ice_dcf_tm_node_list *tc_list = &hw->tm_conf.tc_list;
+       struct ice_dcf_tm_node_list *vsi_list = &hw->tm_conf.vsi_list;
+       struct ice_dcf_tm_node *tm_node;
+
+       if (!(hw->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_QOS)) {
+               PMD_DRV_LOG(ERR, "Configure VF bandwidth is not supported");
+               return ICE_ERR_NOT_SUPPORTED;
+       }
+
+       /* check if all TC nodes are set */
+       if (BIT(hw->tm_conf.nb_tc_node) & hw->ets_config->tc_valid_bits) {
+               PMD_DRV_LOG(ERR, "Not all enabled TC nodes are set");
+               return ICE_ERR_PARAM;
+       }
+
+       /* check if all VF vsi nodes are binded to all TCs */
+       TAILQ_FOREACH(tm_node, tc_list, node) {
+               if (tm_node->reference_count != hw->num_vfs) {
+                       PMD_DRV_LOG(ERR, "Not all VFs are binded to TC%u",
+                                       tm_node->tc);
+                       return ICE_ERR_PARAM;
+               }
+       }
+
+       /* check if VF vsi node id start with 0 */
+       tm_node = TAILQ_FIRST(vsi_list);
+       if (tm_node->id != 0) {
+               PMD_DRV_LOG(ERR, "VF vsi node id must start with 0");
+               return ICE_ERR_PARAM;
+       }
+
+       return ICE_SUCCESS;
+}
+
 static int ice_dcf_hierarchy_commit(struct rte_eth_dev *dev,
                                 int clear_on_fail,
                                 __rte_unused struct rte_tm_error *error)
@@ -645,20 +682,11 @@ static int ice_dcf_hierarchy_commit(struct rte_eth_dev *dev,
        uint32_t port_bw, cir_total;
        uint16_t size, vf_id;
        uint8_t num_elem = 0;
-       int i, ret_val = ICE_SUCCESS;
-
-       if (!(hw->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_QOS)) {
-               PMD_DRV_LOG(ERR, "Configure VF bandwidth is not supported");
-               ret_val = ICE_ERR_NOT_SUPPORTED;
-               goto fail_clear;
-       }
+       int i, ret_val;
 
-       /* check if all TC nodes are set */
-       if (BIT(hw->tm_conf.nb_tc_node) & hw->ets_config->tc_valid_bits) {
-               PMD_DRV_LOG(ERR, "Not all enabled TC nodes are set");
-               ret_val = ICE_ERR_PARAM;
+       ret_val = ice_dcf_commit_check(hw);
+       if (ret_val)
                goto fail_clear;
-       }
 
        size = sizeof(struct virtchnl_dcf_bw_cfg_list) +
                sizeof(struct virtchnl_dcf_bw_cfg) *
@@ -690,7 +718,10 @@ static int ice_dcf_hierarchy_commit(struct rte_eth_dev *dev,
                        VIRTCHNL_DCF_BW_PIR | VIRTCHNL_DCF_BW_CIR;
        }
 
-       for (vf_id = 0; vf_id < hw->num_vfs; vf_id++) {
+       /* start with VF1, skip VF0 since DCF does not need to configure
+        * bandwidth for itself
+        */
+       for (vf_id = 1; vf_id < hw->num_vfs; vf_id++) {
                num_elem = 0;
                vf_bw->vf_id = vf_id;
                vf_bw->node_type = VIRTCHNL_DCF_TARGET_VF_BW;
@@ -722,14 +753,6 @@ static int ice_dcf_hierarchy_commit(struct rte_eth_dev *dev,
                        num_elem++;
                }
 
-               /* check if all TC nodes are set with VF vsi nodes */
-               if (num_elem != hw->tm_conf.nb_tc_node) {
-                       PMD_DRV_LOG(ERR, "VF%u vsi nodes are not set to all TC nodes, node id should be continuous",
-                                   vf_id);
-                       ret_val = ICE_ERR_PARAM;
-                       goto fail_clear;
-               }
-
                vf_bw->num_elem = num_elem;
                ret_val = ice_dcf_set_vf_bw(hw, vf_bw, size);
                if (ret_val)