bus/fslmc: support DMA mapping for ARM SMMU
authorHemant Agrawal <hemant.agrawal@nxp.com>
Tue, 11 Apr 2017 13:37:26 +0000 (19:07 +0530)
committerFerruh Yigit <ferruh.yigit@intel.com>
Wed, 19 Apr 2017 13:37:37 +0000 (15:37 +0200)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
drivers/bus/fslmc/fslmc_vfio.c
drivers/bus/fslmc/fslmc_vfio.h
drivers/bus/fslmc/rte_bus_fslmc_version.map

index d28fb7b..5d4ac67 100644 (file)
 static struct fslmc_vfio_group vfio_groups[VFIO_MAX_GRP];
 static struct fslmc_vfio_container vfio_containers[VFIO_MAX_CONTAINERS];
 static int container_device_fd;
+static uint32_t *msi_intr_vaddr;
 void *(*rte_mcp_ptr_list);
 static uint32_t mcp_id;
+static int is_dma_done;
 
 static int vfio_connect_container(struct fslmc_vfio_group *vfio_group)
 {
@@ -147,6 +149,35 @@ static int vfio_connect_container(struct fslmc_vfio_group *vfio_group)
        return 0;
 }
 
+static int vfio_map_irq_region(struct fslmc_vfio_group *group)
+{
+       int ret;
+       unsigned long *vaddr = NULL;
+       struct vfio_iommu_type1_dma_map map = {
+               .argsz = sizeof(map),
+               .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE,
+               .vaddr = 0x6030000,
+               .iova = 0x6030000,
+               .size = 0x1000,
+       };
+
+       vaddr = (unsigned long *)mmap(NULL, 0x1000, PROT_WRITE |
+               PROT_READ, MAP_SHARED, container_device_fd, 0x6030000);
+       if (vaddr == MAP_FAILED) {
+               FSLMC_VFIO_LOG(ERR, "Unable to map region (errno = %d)", errno);
+               return -errno;
+       }
+
+       msi_intr_vaddr = (uint32_t *)((char *)(vaddr) + 64);
+       map.vaddr = (unsigned long)vaddr;
+       ret = ioctl(group->container->fd, VFIO_IOMMU_MAP_DMA, &map);
+       if (ret == 0)
+               return 0;
+
+       FSLMC_VFIO_LOG(ERR, "VFIO_IOMMU_MAP_DMA fails (errno = %d)", errno);
+       return -errno;
+}
+
 int vfio_dmamap_mem_region(uint64_t vaddr,
                           uint64_t iova,
                           uint64_t size)
@@ -170,6 +201,71 @@ int vfio_dmamap_mem_region(uint64_t vaddr,
        return 0;
 }
 
+int rte_fslmc_vfio_dmamap(void)
+{
+       int ret;
+       struct fslmc_vfio_group *group;
+       struct vfio_iommu_type1_dma_map dma_map = {
+               .argsz = sizeof(struct vfio_iommu_type1_dma_map),
+               .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE,
+       };
+
+       int i;
+       const struct rte_memseg *memseg;
+
+       if (is_dma_done)
+               return 0;
+       is_dma_done = 1;
+
+       for (i = 0; i < RTE_MAX_MEMSEG; i++) {
+               memseg = rte_eal_get_physmem_layout();
+               if (memseg == NULL) {
+                       FSLMC_VFIO_LOG(ERR, "Cannot get physical layout.");
+                       return -ENODEV;
+               }
+
+               if (memseg[i].addr == NULL && memseg[i].len == 0)
+                       break;
+
+               dma_map.size = memseg[i].len;
+               dma_map.vaddr = memseg[i].addr_64;
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+               dma_map.iova = memseg[i].phys_addr;
+#else
+               dma_map.iova = dma_map.vaddr;
+#endif
+
+               /* SET DMA MAP for IOMMU */
+               group = &vfio_groups[0];
+
+               if (!group->container) {
+                       FSLMC_VFIO_LOG(ERR, "Container is not connected ");
+                       return -1;
+               }
+
+               FSLMC_VFIO_LOG(DEBUG, "-->Initial SHM Virtual ADDR %llX",
+                            dma_map.vaddr);
+               FSLMC_VFIO_LOG(DEBUG, "-----> DMA size 0x%llX\n", dma_map.size);
+               ret = ioctl(group->container->fd, VFIO_IOMMU_MAP_DMA,
+                           &dma_map);
+               if (ret) {
+                       FSLMC_VFIO_LOG(ERR, "VFIO_IOMMU_MAP_DMA API"
+                                      "(errno = %d)", errno);
+                       return ret;
+               }
+               FSLMC_VFIO_LOG(DEBUG, "-----> dma_map.vaddr = 0x%llX",
+                            dma_map.vaddr);
+       }
+
+       /* TODO - This is a W.A. as VFIO currently does not add the mapping of
+        * the interrupt region to SMMU. This should be removed once the
+        * support is added in the Kernel.
+        */
+       vfio_map_irq_region(group);
+
+       return 0;
+}
+
 static int64_t vfio_map_mcp_obj(struct fslmc_vfio_group *group, char *mcp_obj)
 {
        int64_t v_addr = (int64_t)MAP_FAILED;
index 80c6869..53dd0b7 100644 (file)
@@ -70,6 +70,7 @@ int vfio_dmamap_mem_region(
 
 int fslmc_vfio_setup_group(void);
 int fslmc_vfio_process_group(void);
+int rte_fslmc_vfio_dmamap(void);
 
 /* create dpio device */
 int dpaa2_create_dpio_device(struct fslmc_vfio_device *vdev,
index ed445e2..09c4fac 100644 (file)
@@ -41,6 +41,7 @@ DPDK_17.05 {
        qbman_swp_send_multiple;
        rte_fslmc_driver_register;
        rte_fslmc_driver_unregister;
+       rte_fslmc_vfio_dmamap;
        rte_mcp_ptr_list;
 
        local: *;