--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016-2020 Intel Corporation
+ */
+
+#ifndef __DLB2_USER_H
+#define __DLB2_USER_H
+
+#define DLB2_MAX_NAME_LEN 64
+
+#include <linux/types.h>
+
+enum dlb2_error {
+ DLB2_ST_SUCCESS = 0,
+ DLB2_ST_NAME_EXISTS,
+ DLB2_ST_DOMAIN_UNAVAILABLE,
+ DLB2_ST_LDB_PORTS_UNAVAILABLE,
+ DLB2_ST_DIR_PORTS_UNAVAILABLE,
+ DLB2_ST_LDB_QUEUES_UNAVAILABLE,
+ DLB2_ST_LDB_CREDITS_UNAVAILABLE,
+ DLB2_ST_DIR_CREDITS_UNAVAILABLE,
+ DLB2_ST_SEQUENCE_NUMBERS_UNAVAILABLE,
+ DLB2_ST_INVALID_DOMAIN_ID,
+ DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION,
+ DLB2_ST_ATOMIC_INFLIGHTS_UNAVAILABLE,
+ DLB2_ST_HIST_LIST_ENTRIES_UNAVAILABLE,
+ DLB2_ST_INVALID_LDB_QUEUE_ID,
+ DLB2_ST_INVALID_CQ_DEPTH,
+ DLB2_ST_INVALID_CQ_VIRT_ADDR,
+ DLB2_ST_INVALID_PORT_ID,
+ DLB2_ST_INVALID_QID,
+ DLB2_ST_INVALID_PRIORITY,
+ DLB2_ST_NO_QID_SLOTS_AVAILABLE,
+ DLB2_ST_INVALID_DIR_QUEUE_ID,
+ DLB2_ST_DIR_QUEUES_UNAVAILABLE,
+ DLB2_ST_DOMAIN_NOT_CONFIGURED,
+ DLB2_ST_INTERNAL_ERROR,
+ DLB2_ST_DOMAIN_IN_USE,
+ DLB2_ST_DOMAIN_NOT_FOUND,
+ DLB2_ST_QUEUE_NOT_FOUND,
+ DLB2_ST_DOMAIN_STARTED,
+ DLB2_ST_DOMAIN_NOT_STARTED,
+ DLB2_ST_LDB_PORT_REQUIRED_FOR_LDB_QUEUES,
+ DLB2_ST_DOMAIN_RESET_FAILED,
+ DLB2_ST_MBOX_ERROR,
+ DLB2_ST_INVALID_HIST_LIST_DEPTH,
+ DLB2_ST_NO_MEMORY,
+ DLB2_ST_INVALID_LOCK_ID_COMP_LEVEL,
+ DLB2_ST_INVALID_COS_ID,
+};
+
+static const char dlb2_error_strings[][128] = {
+ "DLB2_ST_SUCCESS",
+ "DLB2_ST_NAME_EXISTS",
+ "DLB2_ST_DOMAIN_UNAVAILABLE",
+ "DLB2_ST_LDB_PORTS_UNAVAILABLE",
+ "DLB2_ST_DIR_PORTS_UNAVAILABLE",
+ "DLB2_ST_LDB_QUEUES_UNAVAILABLE",
+ "DLB2_ST_LDB_CREDITS_UNAVAILABLE",
+ "DLB2_ST_DIR_CREDITS_UNAVAILABLE",
+ "DLB2_ST_SEQUENCE_NUMBERS_UNAVAILABLE",
+ "DLB2_ST_INVALID_DOMAIN_ID",
+ "DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION",
+ "DLB2_ST_ATOMIC_INFLIGHTS_UNAVAILABLE",
+ "DLB2_ST_HIST_LIST_ENTRIES_UNAVAILABLE",
+ "DLB2_ST_INVALID_LDB_QUEUE_ID",
+ "DLB2_ST_INVALID_CQ_DEPTH",
+ "DLB2_ST_INVALID_CQ_VIRT_ADDR",
+ "DLB2_ST_INVALID_PORT_ID",
+ "DLB2_ST_INVALID_QID",
+ "DLB2_ST_INVALID_PRIORITY",
+ "DLB2_ST_NO_QID_SLOTS_AVAILABLE",
+ "DLB2_ST_INVALID_DIR_QUEUE_ID",
+ "DLB2_ST_DIR_QUEUES_UNAVAILABLE",
+ "DLB2_ST_DOMAIN_NOT_CONFIGURED",
+ "DLB2_ST_INTERNAL_ERROR",
+ "DLB2_ST_DOMAIN_IN_USE",
+ "DLB2_ST_DOMAIN_NOT_FOUND",
+ "DLB2_ST_QUEUE_NOT_FOUND",
+ "DLB2_ST_DOMAIN_STARTED",
+ "DLB2_ST_DOMAIN_NOT_STARTED",
+ "DLB2_ST_LDB_PORT_REQUIRED_FOR_LDB_QUEUES",
+ "DLB2_ST_DOMAIN_RESET_FAILED",
+ "DLB2_ST_MBOX_ERROR",
+ "DLB2_ST_INVALID_HIST_LIST_DEPTH",
+ "DLB2_ST_NO_MEMORY",
+ "DLB2_ST_INVALID_LOCK_ID_COMP_LEVEL",
+ "DLB2_ST_INVALID_COS_ID",
+};
+
+struct dlb2_cmd_response {
+ __u32 status; /* Interpret using enum dlb2_error */
+ __u32 id;
+};
+
+/*******************/
+/* 'dlb2' commands */
+/*******************/
+
+#define DLB2_DEVICE_VERSION(x) (((x) >> 8) & 0xFF)
+#define DLB2_DEVICE_REVISION(x) ((x) & 0xFF)
+
+enum dlb2_revisions {
+ DLB2_REV_A0 = 0,
+};
+
+/*
+ * DLB2_CMD_GET_DEVICE_VERSION: Query the DLB device version.
+ *
+ * This ioctl interface is the same in all driver versions and is always
+ * the first ioctl.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id[7:0]: Device revision.
+ * - response.id[15:8]: Device version.
+ */
+
+struct dlb2_get_device_version_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+};
+
+/*
+ * DLB2_CMD_CREATE_SCHED_DOMAIN: Create a DLB 2.0 scheduling domain and reserve
+ * its hardware resources. This command returns the newly created domain
+ * ID and a file descriptor for accessing the domain.
+ *
+ * Input parameters:
+ * - num_ldb_queues: Number of load-balanced queues.
+ * - num_ldb_ports: Number of load-balanced ports that can be allocated from
+ * any class-of-service with available ports.
+ * - num_cos_ldb_ports[4]: Number of load-balanced ports from
+ * classes-of-service 0-3.
+ * - num_dir_ports: Number of directed ports. A directed port has one directed
+ * queue, so no num_dir_queues argument is necessary.
+ * - num_atomic_inflights: This specifies the amount of temporary atomic QE
+ * storage for the domain. This storage is divided among the domain's
+ * load-balanced queues that are configured for atomic scheduling.
+ * - num_hist_list_entries: Amount of history list storage. This is divided
+ * among the domain's CQs.
+ * - num_ldb_credits: Amount of load-balanced QE storage (QED). QEs occupy this
+ * space until they are scheduled to a load-balanced CQ. One credit
+ * represents the storage for one QE.
+ * - num_dir_credits: Amount of directed QE storage (DQED). QEs occupy this
+ * space until they are scheduled to a directed CQ. One credit represents
+ * the storage for one QE.
+ * - cos_strict: If set, return an error if there are insufficient ports in
+ * class-of-service N to satisfy the num_ldb_ports_cosN argument. If
+ * unset, attempt to fulfill num_ldb_ports_cosN arguments from other
+ * classes-of-service if class N does not contain enough free ports.
+ * - padding1: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: domain ID.
+ * - domain_fd: file descriptor for performing the domain's ioctl operations
+ * - padding0: Reserved for future use.
+ */
+struct dlb2_create_sched_domain_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ __u32 domain_fd;
+ __u32 padding0;
+ /* Input parameters */
+ __u32 num_ldb_queues;
+ __u32 num_ldb_ports;
+ __u32 num_cos_ldb_ports[4];
+ __u32 num_dir_ports;
+ __u32 num_atomic_inflights;
+ __u32 num_hist_list_entries;
+ __u32 num_ldb_credits;
+ __u32 num_dir_credits;
+ __u8 cos_strict;
+ __u8 padding1[3];
+};
+
+/*
+ * DLB2_CMD_GET_NUM_RESOURCES: Return the number of available resources
+ * (queues, ports, etc.) that this device owns.
+ *
+ * Output parameters:
+ * - num_domains: Number of available scheduling domains.
+ * - num_ldb_queues: Number of available load-balanced queues.
+ * - num_ldb_ports: Total number of available load-balanced ports.
+ * - num_cos_ldb_ports[4]: Number of available load-balanced ports from
+ * classes-of-service 0-3.
+ * - num_dir_ports: Number of available directed ports. There is one directed
+ * queue for every directed port.
+ * - num_atomic_inflights: Amount of available temporary atomic QE storage.
+ * - num_hist_list_entries: Amount of history list storage.
+ * - max_contiguous_hist_list_entries: History list storage is allocated in
+ * a contiguous chunk, and this return value is the longest available
+ * contiguous range of history list entries.
+ * - num_ldb_credits: Amount of available load-balanced QE storage.
+ * - num_dir_credits: Amount of available directed QE storage.
+ */
+struct dlb2_get_num_resources_args {
+ /* Output parameters */
+ __u32 num_sched_domains;
+ __u32 num_ldb_queues;
+ __u32 num_ldb_ports;
+ __u32 num_cos_ldb_ports[4];
+ __u32 num_dir_ports;
+ __u32 num_atomic_inflights;
+ __u32 num_hist_list_entries;
+ __u32 max_contiguous_hist_list_entries;
+ __u32 num_ldb_credits;
+ __u32 num_dir_credits;
+};
+
+/*
+ * DLB2_CMD_SET_SN_ALLOCATION: Configure a sequence number group (PF only)
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - num: Number of sequence numbers per queue.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_set_sn_allocation_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 group;
+ __u32 num;
+};
+
+/*
+ * DLB2_CMD_GET_SN_ALLOCATION: Get a sequence number group's configuration
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified group's number of sequence numbers per queue.
+ */
+struct dlb2_get_sn_allocation_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 group;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_CMD_SET_COS_BW: Set a bandwidth allocation percentage for a
+ * load-balanced port class-of-service (PF only).
+ *
+ * Input parameters:
+ * - cos_id: class-of-service ID, between 0 and 3 (inclusive).
+ * - bandwidth: class-of-service bandwidth percentage. Total bandwidth
+ * percentages across all 4 classes cannot exceed 100%.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_set_cos_bw_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 cos_id;
+ __u32 bandwidth;
+};
+
+/*
+ * DLB2_CMD_GET_COS_BW: Get the bandwidth allocation percentage for a
+ * load-balanced port class-of-service.
+ *
+ * Input parameters:
+ * - cos_id: class-of-service ID, between 0 and 3 (inclusive).
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified class's bandwidth percentage.
+ */
+struct dlb2_get_cos_bw_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 cos_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_CMD_GET_SN_OCCUPANCY: Get a sequence number group's occupancy
+ *
+ * Each sequence number group has one or more slots, depending on its
+ * configuration. I.e.:
+ * - If configured for 1024 sequence numbers per queue, the group has 1 slot
+ * - If configured for 512 sequence numbers per queue, the group has 2 slots
+ * ...
+ * - If configured for 32 sequence numbers per queue, the group has 32 slots
+ *
+ * This ioctl returns the group's number of in-use slots. If its occupancy is
+ * 0, the group's sequence number allocation can be reconfigured.
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified group's number of used slots.
+ */
+struct dlb2_get_sn_occupancy_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 group;
+ __u32 padding0;
+};
+
+enum dlb2_cq_poll_modes {
+ DLB2_CQ_POLL_MODE_STD,
+ DLB2_CQ_POLL_MODE_SPARSE,
+
+ /* NUM_DLB2_CQ_POLL_MODE must be last */
+ NUM_DLB2_CQ_POLL_MODE,
+};
+
+/*
+ * DLB2_CMD_QUERY_CQ_POLL_MODE: Query the CQ poll mode setting
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: CQ poll mode (see enum dlb2_cq_poll_modes).
+ */
+struct dlb2_query_cq_poll_mode_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+};
+
+/********************************/
+/* 'scheduling domain' commands */
+/********************************/
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_LDB_QUEUE: Configure a load-balanced queue.
+ * Input parameters:
+ * - num_atomic_inflights: This specifies the amount of temporary atomic QE
+ * storage for this queue. If zero, the queue will not support atomic
+ * scheduling.
+ * - num_sequence_numbers: This specifies the number of sequence numbers used
+ * by this queue. If zero, the queue will not support ordered scheduling.
+ * If non-zero, the queue will not support unordered scheduling.
+ * - num_qid_inflights: The maximum number of QEs that can be inflight
+ * (scheduled to a CQ but not completed) at any time. If
+ * num_sequence_numbers is non-zero, num_qid_inflights must be set equal
+ * to num_sequence_numbers.
+ * - lock_id_comp_level: Lock ID compression level. Specifies the number of
+ * unique lock IDs the queue should compress down to. Valid compression
+ * levels: 0, 64, 128, 256, 512, 1k, 2k, 4k, 64k. If lock_id_comp_level is
+ * 0, the queue won't compress its lock IDs.
+ * - depth_threshold: DLB sets two bits in the received QE to indicate the
+ * depth of the queue relative to the threshold before scheduling the
+ * QE to a CQ:
+ * - 2’b11: depth > threshold
+ * - 2’b10: threshold >= depth > 0.75 * threshold
+ * - 2’b01: 0.75 * threshold >= depth > 0.5 * threshold
+ * - 2’b00: depth <= 0.5 * threshold
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Queue ID.
+ */
+struct dlb2_create_ldb_queue_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 num_sequence_numbers;
+ __u32 num_qid_inflights;
+ __u32 num_atomic_inflights;
+ __u32 lock_id_comp_level;
+ __u32 depth_threshold;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_DIR_QUEUE: Configure a directed queue.
+ * Input parameters:
+ * - port_id: Port ID. If the corresponding directed port is already created,
+ * specify its ID here. Else this argument must be 0xFFFFFFFF to indicate
+ * that the queue is being created before the port.
+ * - depth_threshold: DLB sets two bits in the received QE to indicate the
+ * depth of the queue relative to the threshold before scheduling the
+ * QE to a CQ:
+ * - 2’b11: depth > threshold
+ * - 2’b10: threshold >= depth > 0.75 * threshold
+ * - 2’b01: 0.75 * threshold >= depth > 0.5 * threshold
+ * - 2’b00: depth <= 0.5 * threshold
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Queue ID.
+ */
+struct dlb2_create_dir_queue_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __s32 port_id;
+ __u32 depth_threshold;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_LDB_PORT: Configure a load-balanced port.
+ * Input parameters:
+ * - cq_depth: Depth of the port's CQ. Must be a power-of-two between 8 and
+ * 1024, inclusive.
+ * - cq_depth_threshold: CQ depth interrupt threshold. A value of N means that
+ * the CQ interrupt won't fire until there are N or more outstanding CQ
+ * tokens.
+ * - num_hist_list_entries: Number of history list entries. This must be
+ * greater than or equal cq_depth.
+ * - cos_id: class-of-service to allocate this port from. Must be between 0 and
+ * 3, inclusive.
+ * - cos_strict: If set, return an error if there are no available ports in the
+ * requested class-of-service. Else, allocate the port from a different
+ * class-of-service if the requested class has no available ports.
+ *
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: port ID.
+ */
+
+struct dlb2_create_ldb_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u16 cq_depth;
+ __u16 cq_depth_threshold;
+ __u16 cq_history_list_size;
+ __u8 cos_id;
+ __u8 cos_strict;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_DIR_PORT: Configure a directed port.
+ * Input parameters:
+ * - cq_depth: Depth of the port's CQ. Must be a power-of-two between 8 and
+ * 1024, inclusive.
+ * - cq_depth_threshold: CQ depth interrupt threshold. A value of N means that
+ * the CQ interrupt won't fire until there are N or more outstanding CQ
+ * tokens.
+ * - qid: Queue ID. If the corresponding directed queue is already created,
+ * specify its ID here. Else this argument must be 0xFFFFFFFF to indicate
+ * that the port is being created before the queue.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Port ID.
+ */
+struct dlb2_create_dir_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u16 cq_depth;
+ __u16 cq_depth_threshold;
+ __s32 queue_id;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_START_DOMAIN: Mark the end of the domain configuration. This
+ * must be called before passing QEs into the device, and no configuration
+ * ioctls can be issued once the domain has started. Sending QEs into the
+ * device before calling this ioctl will result in undefined behavior.
+ * Input parameters:
+ * - (None)
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_start_domain_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_MAP_QID: Map a load-balanced queue to a load-balanced port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - qid: Load-balanced queue ID.
+ * - priority: Queue->port service priority.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_map_qid_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 qid;
+ __u32 priority;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_UNMAP_QID: Unmap a load-balanced queue to a load-balanced
+ * port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - qid: Load-balanced queue ID.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_unmap_qid_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 qid;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_ENABLE_LDB_PORT: Enable scheduling to a load-balanced port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_enable_ldb_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_ENABLE_DIR_PORT: Enable scheduling to a directed port.
+ * Input parameters:
+ * - port_id: Directed port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_enable_dir_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DISABLE_LDB_PORT: Disable scheduling to a load-balanced
+ * port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_disable_ldb_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DISABLE_DIR_PORT: Disable scheduling to a directed port.
+ * Input parameters:
+ * - port_id: Directed port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_disable_dir_port_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_GET_LDB_QUEUE_DEPTH: Get a load-balanced queue's depth.
+ * Input parameters:
+ * - queue_id: The load-balanced queue ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: queue depth.
+ */
+struct dlb2_get_ldb_queue_depth_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 queue_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DIR_QUEUE_DEPTH: Get a directed queue's depth.
+ * Input parameters:
+ * - queue_id: The directed queue ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: queue depth.
+ */
+struct dlb2_get_dir_queue_depth_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 queue_id;
+ __u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_PENDING_PORT_UNMAPS: Get number of queue unmap operations in
+ * progress for a load-balanced port.
+ *
+ * Note: This is a snapshot; the number of unmap operations in progress
+ * is subject to change at any time.
+ *
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ * - response.id: number of unmaps in progress.
+ */
+struct dlb2_pending_port_unmaps_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u32 padding0;
+};
+
+/*
+ * Mapping sizes for memory mapping the consumer queue (CQ) memory space, and
+ * producer port (PP) MMIO space.
+ */
+#define DLB2_CQ_SIZE 65536
+#define DLB2_PP_SIZE 4096
+
+
+#endif /* __DLB2_USER_H */
git.droids-corp.org / dpdk.git / commitdiff