net/qede/base: limit number of non ethernet queues to 64

Limit the number of non ethernet queues to 64, allowing a max queues to
status block ratio of 2:1 in case of storage target. Theoretically a
non-target storage PF can have 128 queues and SBs.

This change is to support 64 entries for a target iSCSI/FCoE PF and 128
for a non-target.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

diff --git a/drivers/net/qede/base/ecore.h b/drivers/net/qede/base/ecore.h
index 5d79fdf..cf66c4c 100644 (file)
--- a/drivers/net/qede/base/ecore.h
+++ b/drivers/net/qede/base/ecore.h
@@ -870,6 +870,9 @@ struct ecore_dev {
        bool                            b_is_emul_full;
 #endif
 
+       /* Indicates whether this PF serves a storage target */
+       bool                            b_is_target;
+
 #ifdef CONFIG_ECORE_BINARY_FW /* @DPDK */
        void                            *firmware;
        u64                             fw_len;

diff --git a/drivers/net/qede/base/ecore_dev.c b/drivers/net/qede/base/ecore_dev.c
index 6302abc..fdb62f2 100644 (file)
--- a/drivers/net/qede/base/ecore_dev.c
+++ b/drivers/net/qede/base/ecore_dev.c
@@ -3027,15 +3027,30 @@ static void ecore_hw_set_feat(struct ecore_hwfn *p_hwfn)
                                   FEAT_NUM(p_hwfn, ECORE_VF_L2_QUE));
        }
 
-       if (ECORE_IS_FCOE_PERSONALITY(p_hwfn))
-               feat_num[ECORE_FCOE_CQ] =
-                       OSAL_MIN_T(u32, sb_cnt.cnt, RESC_NUM(p_hwfn,
-                                                            ECORE_CMDQS_CQS));
+       if (ECORE_IS_FCOE_PERSONALITY(p_hwfn) ||
+           ECORE_IS_ISCSI_PERSONALITY(p_hwfn)) {
+               u32 *p_storage_feat = ECORE_IS_FCOE_PERSONALITY(p_hwfn) ?
+                                     &feat_num[ECORE_FCOE_CQ] :
+                                     &feat_num[ECORE_ISCSI_CQ];
+               u32 limit = sb_cnt.cnt;
+
+               /* The number of queues should not exceed the number of FP SBs.
+                * In storage target, the queues are divided into pairs of a CQ
+                * and a CmdQ, and each pair uses a single SB. The limit in
+                * this case should allow a max ratio of 2:1 instead of 1:1.
+                */
+               if (p_hwfn->p_dev->b_is_target)
+                       limit *= 2;
+               *p_storage_feat = OSAL_MIN_T(u32, limit,
+                                            RESC_NUM(p_hwfn, ECORE_CMDQS_CQS));
 
-       if (ECORE_IS_ISCSI_PERSONALITY(p_hwfn))
-               feat_num[ECORE_ISCSI_CQ] =
-                       OSAL_MIN_T(u32, sb_cnt.cnt, RESC_NUM(p_hwfn,
-                                                            ECORE_CMDQS_CQS));
+               /* @DPDK */
+               /* The size of "cq_cmdq_sb_num_arr" in the fcoe/iscsi init
+                * ramrod is limited to "NUM_OF_GLOBAL_QUEUES / 2".
+                */
+               *p_storage_feat = OSAL_MIN_T(u32, *p_storage_feat,
+                                            (NUM_OF_GLOBAL_QUEUES / 2));
+       }
 
        DP_VERBOSE(p_hwfn, ECORE_MSG_PROBE,
                   "#PF_L2_QUEUE=%d VF_L2_QUEUES=%d #ROCE_CNQ=%d #FCOE_CQ=%d #ISCSI_CQ=%d #SB=%d\n",
@@ -4327,6 +4342,7 @@ enum _ecore_status_t ecore_hw_prepare(struct ecore_dev *p_dev,
        p_dev->chk_reg_fifo = p_params->chk_reg_fifo;
        p_dev->allow_mdump = p_params->allow_mdump;
        p_hwfn->b_en_pacing = p_params->b_en_pacing;
+       p_dev->b_is_target = p_params->b_is_target;
 
        if (p_params->b_relaxed_probe)
                p_params->p_relaxed_res = ECORE_HW_PREPARE_SUCCESS;

diff --git a/drivers/net/qede/base/ecore_dev_api.h b/drivers/net/qede/base/ecore_dev_api.h
index 02bacc2..7cba54c 100644 (file)
--- a/drivers/net/qede/base/ecore_dev_api.h
+++ b/drivers/net/qede/base/ecore_dev_api.h
@@ -271,6 +271,9 @@ struct ecore_hw_prepare_params {
 
        /* Enable/disable request by ecore client for pacing */
        bool b_en_pacing;
+
+       /* Indicates whether this PF serves a storage target */
+       bool b_is_target;
 };
 
 /**