--- /dev/null
+/*-
+ * Copyright (c) 2007-2013 QLogic Corporation. All rights reserved.
+ *
+ * Eric Davis <edavis@broadcom.com>
+ * David Christensen <davidch@broadcom.com>
+ * Gary Zambrano <zambrano@broadcom.com>
+ *
+ * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Broadcom Corporation nor the name of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written consent.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define BNX2X_DRIVER_VERSION "1.78.18"
+
+#include "bnx2x.h"
+#include "bnx2x_vfpf.h"
+#include "ecore_sp.h"
+#include "ecore_init.h"
+#include "ecore_init_ops.h"
+
+#include "rte_pci_dev_ids.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <zlib.h>
+
+static z_stream zlib_stream;
+
+#define EVL_VLID_MASK 0x0FFF
+
+#define BNX2X_DEF_SB_ATT_IDX 0x0001
+#define BNX2X_DEF_SB_IDX 0x0002
+
+/*
+ * FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
+ * function HW initialization.
+ */
+#define FLR_WAIT_USEC 10000 /* 10 msecs */
+#define FLR_WAIT_INTERVAL 50 /* usecs */
+#define FLR_POLL_CNT (FLR_WAIT_USEC / FLR_WAIT_INTERVAL) /* 200 */
+
+struct pbf_pN_buf_regs {
+ int pN;
+ uint32_t init_crd;
+ uint32_t crd;
+ uint32_t crd_freed;
+};
+
+struct pbf_pN_cmd_regs {
+ int pN;
+ uint32_t lines_occup;
+ uint32_t lines_freed;
+};
+
+/* resources needed for unloading a previously loaded device */
+
+#define BNX2X_PREV_WAIT_NEEDED 1
+rte_spinlock_t bnx2x_prev_mtx;
+struct bnx2x_prev_list_node {
+ LIST_ENTRY(bnx2x_prev_list_node) node;
+ uint8_t bus;
+ uint8_t slot;
+ uint8_t path;
+ uint8_t aer;
+ uint8_t undi;
+};
+
+static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
+ = LIST_HEAD_INITIALIZER(bnx2x_prev_list);
+
+static int load_count[2][3] = { { 0 } };
+ /* per-path: 0-common, 1-port0, 2-port1 */
+
+static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
+ uint8_t cmng_type);
+static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
+static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
+ uint8_t port);
+static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
+static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
+static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
+static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
+static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
+ uint8_t print);
+static void bnx2x_int_disable(struct bnx2x_softc *sc);
+static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
+static void bnx2x_pf_disable(struct bnx2x_softc *sc);
+static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
+ struct bnx2x_fastpath *fp,
+ uint16_t rx_bd_prod, uint16_t rx_cq_prod);
+static void bnx2x_link_report(struct bnx2x_softc *sc);
+void bnx2x_link_status_update(struct bnx2x_softc *sc);
+static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
+static void bnx2x_free_mem(struct bnx2x_softc *sc);
+static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
+static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
+static __attribute__ ((noinline))
+int bnx2x_nic_load(struct bnx2x_softc *sc);
+
+static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
+static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp);
+static void bnx2x_periodic_stop(struct bnx2x_softc *sc);
+static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
+ uint8_t storm, uint16_t index, uint8_t op,
+ uint8_t update);
+
+int bnx2x_test_bit(int nr, volatile unsigned long *addr)
+{
+ int res;
+
+ mb();
+ res = ((*addr) & (1UL << nr)) != 0;
+ mb();
+ return res;
+}
+
+void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
+{
+ __sync_fetch_and_or(addr, (1UL << nr));
+}
+
+void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
+{
+ __sync_fetch_and_and(addr, ~(1UL << nr));
+}
+
+int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = (1UL << nr);
+ return __sync_fetch_and_and(addr, ~mask) & mask;
+}
+
+int bnx2x_cmpxchg(volatile int *addr, int old, int new)
+{
+ return __sync_val_compare_and_swap(addr, old, new);
+}
+
+int
+bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
+ const char *msg, uint32_t align)
+{
+ char mz_name[RTE_MEMZONE_NAMESIZE];
+ const struct rte_memzone *z;
+
+ dma->sc = sc;
+ if (IS_PF(sc))
+ sprintf(mz_name, "bnx2x%d_%s_%lx", SC_ABS_FUNC(sc), msg,
+ rte_get_timer_cycles());
+ else
+ sprintf(mz_name, "bnx2x%d_%s_%lx", sc->pcie_device, msg,
+ rte_get_timer_cycles());
+
+ /* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
+ z = rte_memzone_reserve_aligned(mz_name, (uint64_t) (size),
+ rte_lcore_to_socket_id(rte_lcore_id()),
+ 0, align);
+ if (z == NULL) {
+ PMD_DRV_LOG(ERR, "DMA alloc failed for %s", msg);
+ return -ENOMEM;
+ }
+ dma->paddr = (uint64_t) z->phys_addr;
+ dma->vaddr = z->addr;
+
+ PMD_DRV_LOG(DEBUG, "%s: virt=%p phys=%lx", msg, dma->vaddr, dma->paddr);
+
+ return 0;
+}
+
+static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+ uint32_t lock_status;
+ uint32_t resource_bit = (1 << resource);
+ int func = SC_FUNC(sc);
+ uint32_t hw_lock_control_reg;
+ int cnt;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* validate the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ PMD_DRV_LOG(NOTICE,
+ "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
+ resource);
+ return -1;
+ }
+
+ if (func <= 5) {
+ hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
+ } else {
+ hw_lock_control_reg =
+ (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
+ }
+
+ /* validate the resource is not already taken */
+ lock_status = REG_RD(sc, hw_lock_control_reg);
+ if (lock_status & resource_bit) {
+ PMD_DRV_LOG(NOTICE,
+ "resource in use (status 0x%x bit 0x%x)",
+ lock_status, resource_bit);
+ return -1;
+ }
+
+ /* try every 5ms for 5 seconds */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
+ lock_status = REG_RD(sc, hw_lock_control_reg);
+ if (lock_status & resource_bit) {
+ return 0;
+ }
+ DELAY(5000);
+ }
+
+ PMD_DRV_LOG(NOTICE, "Resource lock timeout!");
+ return -1;
+}
+
+static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+ uint32_t lock_status;
+ uint32_t resource_bit = (1 << resource);
+ int func = SC_FUNC(sc);
+ uint32_t hw_lock_control_reg;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* validate the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ PMD_DRV_LOG(NOTICE,
+ "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
+ resource);
+ return -1;
+ }
+
+ if (func <= 5) {
+ hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
+ } else {
+ hw_lock_control_reg =
+ (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
+ }
+
+ /* validate the resource is currently taken */
+ lock_status = REG_RD(sc, hw_lock_control_reg);
+ if (!(lock_status & resource_bit)) {
+ PMD_DRV_LOG(NOTICE,
+ "resource not in use (status 0x%x bit 0x%x)",
+ lock_status, resource_bit);
+ return -1;
+ }
+
+ REG_WR(sc, hw_lock_control_reg, resource_bit);
+ return 0;
+}
+
+/* copy command into DMAE command memory and set DMAE command Go */
+void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
+{
+ uint32_t cmd_offset;
+ uint32_t i;
+
+ cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
+ for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
+ REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
+ }
+
+ REG_WR(sc, dmae_reg_go_c[idx], 1);
+}
+
+uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
+{
+ return (opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
+ DMAE_COMMAND_C_TYPE_ENABLE));
+}
+
+uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
+{
+ return (opcode & ~DMAE_COMMAND_SRC_RESET);
+}
+
+uint32_t
+bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
+ uint8_t with_comp, uint8_t comp_type)
+{
+ uint32_t opcode = 0;
+
+ opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
+ (dst_type << DMAE_COMMAND_DST_SHIFT));
+
+ opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
+
+ opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
+
+ opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
+ (SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
+
+ opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
+
+#ifdef __BIG_ENDIAN
+ opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
+#else
+ opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
+#endif
+
+ if (with_comp) {
+ opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
+ }
+
+ return opcode;
+}
+
+static void
+bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
+ uint8_t src_type, uint8_t dst_type)
+{
+ memset(dmae, 0, sizeof(struct dmae_command));
+
+ /* set the opcode */
+ dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
+ TRUE, DMAE_COMP_PCI);
+
+ /* fill in the completion parameters */
+ dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
+ dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
+ dmae->comp_val = DMAE_COMP_VAL;
+}
+
+/* issue a DMAE command over the init channel and wait for completion */
+static int
+bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
+{
+ uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
+ int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
+
+ /* reset completion */
+ *wb_comp = 0;
+
+ /* post the command on the channel used for initializations */
+ bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));
+
+ /* wait for completion */
+ DELAY(500);
+
+ while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
+ if (!timeout ||
+ (sc->recovery_state != BNX2X_RECOVERY_DONE &&
+ sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
+ PMD_DRV_LOG(INFO, "DMAE timeout!");
+ return DMAE_TIMEOUT;
+ }
+
+ timeout--;
+ DELAY(50);
+ }
+
+ if (*wb_comp & DMAE_PCI_ERR_FLAG) {
+ PMD_DRV_LOG(INFO, "DMAE PCI error!");
+ return DMAE_PCI_ERROR;
+ }
+
+ return 0;
+}
+
+void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
+{
+ struct dmae_command dmae;
+ uint32_t *data;
+ uint32_t i;
+ int rc;
+
+ if (!sc->dmae_ready) {
+ data = BNX2X_SP(sc, wb_data[0]);
+
+ for (i = 0; i < len32; i++) {
+ data[i] = REG_RD(sc, (src_addr + (i * 4)));
+ }
+
+ return;
+ }
+
+ /* set opcode and fixed command fields */
+ bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
+
+ /* fill in addresses and len */
+ dmae.src_addr_lo = (src_addr >> 2); /* GRC addr has dword resolution */
+ dmae.src_addr_hi = 0;
+ dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
+ dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
+ dmae.len = len32;
+
+ /* issue the command and wait for completion */
+ if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
+ rte_panic("DMAE failed (%d)", rc);
+ };
+}
+
+void
+bnx2x_write_dmae(struct bnx2x_softc *sc, phys_addr_t dma_addr, uint32_t dst_addr,
+ uint32_t len32)
+{
+ struct dmae_command dmae;
+ int rc;
+
+ if (!sc->dmae_ready) {
+ ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
+ return;
+ }
+
+ /* set opcode and fixed command fields */
+ bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
+
+ /* fill in addresses and len */
+ dmae.src_addr_lo = U64_LO(dma_addr);
+ dmae.src_addr_hi = U64_HI(dma_addr);
+ dmae.dst_addr_lo = (dst_addr >> 2); /* GRC addr has dword resolution */
+ dmae.dst_addr_hi = 0;
+ dmae.len = len32;
+
+ /* issue the command and wait for completion */
+ if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
+ rte_panic("DMAE failed (%d)", rc);
+ }
+}
+
+static void
+bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
+ uint32_t addr, uint32_t len)
+{
+ uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
+ uint32_t offset = 0;
+
+ while (len > dmae_wr_max) {
+ bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
+ (addr + offset), /* dst GRC address */
+ dmae_wr_max);
+ offset += (dmae_wr_max * 4);
+ len -= dmae_wr_max;
+ }
+
+ bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
+ (addr + offset), /* dst GRC address */
+ len);
+}
+
+void
+bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
+ uint32_t cid)
+{
+ /* ustorm cxt validation */
+ cxt->ustorm_ag_context.cdu_usage =
+ CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
+ CDU_REGION_NUMBER_UCM_AG,
+ ETH_CONNECTION_TYPE);
+ /* xcontext validation */
+ cxt->xstorm_ag_context.cdu_reserved =
+ CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
+ CDU_REGION_NUMBER_XCM_AG,
+ ETH_CONNECTION_TYPE);
+}
+
+static void
+bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
+ uint8_t sb_index, uint8_t ticks)
+{
+ uint32_t addr =
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
+
+ REG_WR8(sc, addr, ticks);
+}
+
+static void
+bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
+ uint8_t sb_index, uint8_t disable)
+{
+ uint32_t enable_flag =
+ (disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
+ uint32_t addr =
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
+ uint8_t flags;
+
+ /* clear and set */
+ flags = REG_RD8(sc, addr);
+ flags &= ~HC_INDEX_DATA_HC_ENABLED;
+ flags |= enable_flag;
+ REG_WR8(sc, addr, flags);
+}
+
+void
+bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
+ uint8_t sb_index, uint8_t disable, uint16_t usec)
+{
+ uint8_t ticks = (usec / 4);
+
+ bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);
+
+ disable = (disable) ? 1 : ((usec) ? 0 : 1);
+ bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
+}
+
+uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
+{
+ return REG_RD(sc, reg_addr);
+}
+
+void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
+{
+ REG_WR(sc, reg_addr, val);
+}
+
+void
+elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
+ __rte_unused const elink_log_id_t elink_log_id, ...)
+{
+ PMD_DRV_LOG(DEBUG, "ELINK EVENT LOG (%d)", elink_log_id);
+}
+
+static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
+{
+ uint32_t spio_reg;
+
+ /* Only 2 SPIOs are configurable */
+ if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
+ PMD_DRV_LOG(NOTICE, "Invalid SPIO 0x%x", spio);
+ return -1;
+ }
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
+
+ /* read SPIO and mask except the float bits */
+ spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_SPIO_OUTPUT_LOW:
+ /* clear FLOAT and set CLR */
+ spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
+ spio_reg |= (spio << MISC_SPIO_CLR_POS);
+ break;
+
+ case MISC_SPIO_OUTPUT_HIGH:
+ /* clear FLOAT and set SET */
+ spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
+ spio_reg |= (spio << MISC_SPIO_SET_POS);
+ break;
+
+ case MISC_SPIO_INPUT_HI_Z:
+ /* set FLOAT */
+ spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(sc, MISC_REG_SPIO, spio_reg);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
+
+ return 0;
+}
+
+static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+ REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+ int gpio_shift = gpio_num;
+ if (gpio_port)
+ gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+ uint32_t gpio_mask = (1 << gpio_shift);
+ uint32_t gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
+ return -1;
+ }
+
+ /* read GPIO value */
+ gpio_reg = REG_RD(sc, MISC_REG_GPIO);
+
+ /* get the requested pin value */
+ return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
+}
+
+static int
+bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+ REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+ int gpio_shift = gpio_num;
+ if (gpio_port)
+ gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+ uint32_t gpio_mask = (1 << gpio_shift);
+ uint32_t gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
+ return -1;
+ }
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ /* read GPIO and mask except the float bits */
+ gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+ /* clear FLOAT and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+ /* clear FLOAT and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+ /* set FLOAT */
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(sc, MISC_REG_GPIO, gpio_reg);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+static int
+bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
+{
+ uint32_t gpio_reg;
+
+ /* any port swapping should be handled by caller */
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ /* read GPIO and mask except the float bits */
+ gpio_reg = REG_RD(sc, MISC_REG_GPIO);
+ gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
+ gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+ /* set CLR */
+ gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+ /* set SET */
+ gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INPUT_HI_Z:
+ /* set FLOAT */
+ gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
+ break;
+
+ default:
+ PMD_DRV_LOG(NOTICE, "Invalid GPIO mode assignment %d", mode);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+ return -1;
+ }
+
+ REG_WR(sc, MISC_REG_GPIO, gpio_reg);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+static int
+bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
+ uint8_t port)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
+ REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
+ int gpio_shift = gpio_num;
+ if (gpio_port)
+ gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
+
+ uint32_t gpio_mask = (1 << gpio_shift);
+ uint32_t gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
+ return -1;
+ }
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ /* read GPIO int */
+ gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
+ /* clear SET and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
+ /* clear CLR and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+uint32_t
+elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
+{
+ return bnx2x_gpio_read(sc, gpio_num, port);
+}
+
+uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
+ uint8_t port)
+{
+ return bnx2x_gpio_write(sc, gpio_num, mode, port);
+}
+
+uint8_t
+elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
+ uint8_t mode /* 0=low 1=high */ )
+{
+ return bnx2x_gpio_mult_write(sc, pins, mode);
+}
+
+uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
+ uint8_t port)
+{
+ return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
+}
+
+void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
+{
+ REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
+ (SC_FUNC(sc) * sizeof(uint32_t))), 1);
+}
+
+/* send the MCP a request, block until there is a reply */
+uint32_t
+elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
+{
+ int mb_idx = SC_FW_MB_IDX(sc);
+ uint32_t seq;
+ uint32_t rc = 0;
+ uint32_t cnt = 1;
+ uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
+
+ seq = ++sc->fw_seq;
+ SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
+ SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
+
+ PMD_DRV_LOG(DEBUG,
+ "wrote command 0x%08x to FW MB param 0x%08x",
+ (command | seq), param);
+
+ /* Let the FW do it's magic. GIve it up to 5 seconds... */
+ do {
+ DELAY(delay * 1000);
+ rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
+ } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
+
+ /* is this a reply to our command? */
+ if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
+ rc &= FW_MSG_CODE_MASK;
+ } else {
+ /* Ruh-roh! */
+ PMD_DRV_LOG(NOTICE, "FW failed to respond!");
+ rc = 0;
+ }
+
+ return rc;
+}
+
+static uint32_t
+bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
+{
+ return elink_cb_fw_command(sc, command, param);
+}
+
+static void
+__storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
+ phys_addr_t mapping)
+{
+ REG_WR(sc, addr, U64_LO(mapping));
+ REG_WR(sc, (addr + 4), U64_HI(mapping));
+}
+
+static void
+storm_memset_spq_addr(struct bnx2x_softc *sc, phys_addr_t mapping,
+ uint16_t abs_fid)
+{
+ uint32_t addr = (XSEM_REG_FAST_MEMORY +
+ XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
+ __storm_memset_dma_mapping(sc, addr, mapping);
+}
+
+static void
+storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
+{
+ REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
+ pf_id);
+ REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
+ pf_id);
+ REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
+ pf_id);
+ REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
+ pf_id);
+}
+
+static void
+storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
+{
+ REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
+ enable);
+ REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
+ enable);
+ REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
+ enable);
+ REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
+ enable);
+}
+
+static void
+storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
+ uint16_t pfid)
+{
+ uint32_t addr;
+ size_t size;
+
+ addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
+ size = sizeof(struct event_ring_data);
+ ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
+}
+
+static void
+storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
+{
+ uint32_t addr = (BAR_CSTRORM_INTMEM +
+ CSTORM_EVENT_RING_PROD_OFFSET(pfid));
+ REG_WR16(sc, addr, eq_prod);
+}
+
+/*
+ * Post a slowpath command.
+ *
+ * A slowpath command is used to propogate a configuration change through
+ * the controller in a controlled manner, allowing each STORM processor and
+ * other H/W blocks to phase in the change. The commands sent on the
+ * slowpath are referred to as ramrods. Depending on the ramrod used the
+ * completion of the ramrod will occur in different ways. Here's a
+ * breakdown of ramrods and how they complete:
+ *
+ * RAMROD_CMD_ID_ETH_PORT_SETUP
+ * Used to setup the leading connection on a port. Completes on the
+ * Receive Completion Queue (RCQ) of that port (typically fp[0]).
+ *
+ * RAMROD_CMD_ID_ETH_CLIENT_SETUP
+ * Used to setup an additional connection on a port. Completes on the
+ * RCQ of the multi-queue/RSS connection being initialized.
+ *
+ * RAMROD_CMD_ID_ETH_STAT_QUERY
+ * Used to force the storm processors to update the statistics database
+ * in host memory. This ramrod is send on the leading connection CID and
+ * completes as an index increment of the CSTORM on the default status
+ * block.
+ *
+ * RAMROD_CMD_ID_ETH_UPDATE
+ * Used to update the state of the leading connection, usually to udpate
+ * the RSS indirection table. Completes on the RCQ of the leading
+ * connection. (Not currently used under FreeBSD until OS support becomes
+ * available.)
+ *
+ * RAMROD_CMD_ID_ETH_HALT
+ * Used when tearing down a connection prior to driver unload. Completes
+ * on the RCQ of the multi-queue/RSS connection being torn down. Don't
+ * use this on the leading connection.
+ *
+ * RAMROD_CMD_ID_ETH_SET_MAC
+ * Sets the Unicast/Broadcast/Multicast used by the port. Completes on
+ * the RCQ of the leading connection.
+ *
+ * RAMROD_CMD_ID_ETH_CFC_DEL
+ * Used when tearing down a conneciton prior to driver unload. Completes
+ * on the RCQ of the leading connection (since the current connection
+ * has been completely removed from controller memory).
+ *
+ * RAMROD_CMD_ID_ETH_PORT_DEL
+ * Used to tear down the leading connection prior to driver unload,
+ * typically fp[0]. Completes as an index increment of the CSTORM on the
+ * default status block.
+ *
+ * RAMROD_CMD_ID_ETH_FORWARD_SETUP
+ * Used for connection offload. Completes on the RCQ of the multi-queue
+ * RSS connection that is being offloaded. (Not currently used under
+ * FreeBSD.)
+ *
+ * There can only be one command pending per function.
+ *
+ * Returns:
+ * 0 = Success, !0 = Failure.
+ */
+
+/* must be called under the spq lock */
+static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
+{
+ struct eth_spe *next_spe = sc->spq_prod_bd;
+
+ if (sc->spq_prod_bd == sc->spq_last_bd) {
+ /* wrap back to the first eth_spq */
+ sc->spq_prod_bd = sc->spq;
+ sc->spq_prod_idx = 0;
+ } else {
+ sc->spq_prod_bd++;
+ sc->spq_prod_idx++;
+ }
+
+ return next_spe;
+}
+
+/* must be called under the spq lock */
+static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
+{
+ int func = SC_FUNC(sc);
+
+ /*
+ * Make sure that BD data is updated before writing the producer.
+ * BD data is written to the memory, the producer is read from the
+ * memory, thus we need a full memory barrier to ensure the ordering.
+ */
+ mb();
+
+ REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
+ sc->spq_prod_idx);
+
+ mb();
+}
+
+/**
+ * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
+ *
+ * @cmd: command to check
+ * @cmd_type: command type
+ */
+static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
+{
+ if ((cmd_type == NONE_CONNECTION_TYPE) ||
+ (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
+ (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
+ (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
+ (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
+ (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
+ (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ * bnx2x_sp_post - place a single command on an SP ring
+ *
+ * @sc: driver handle
+ * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
+ * @cid: SW CID the command is related to
+ * @data_hi: command private data address (high 32 bits)
+ * @data_lo: command private data address (low 32 bits)
+ * @cmd_type: command type (e.g. NONE, ETH)
+ *
+ * SP data is handled as if it's always an address pair, thus data fields are
+ * not swapped to little endian in upper functions. Instead this function swaps
+ * data as if it's two uint32 fields.
+ */
+int
+bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
+ uint32_t data_lo, int cmd_type)
+{
+ struct eth_spe *spe;
+ uint16_t type;
+ int common;
+
+ common = bnx2x_is_contextless_ramrod(command, cmd_type);
+
+ if (common) {
+ if (!atomic_load_acq_long(&sc->eq_spq_left)) {
+ PMD_DRV_LOG(INFO, "EQ ring is full!");
+ return -1;
+ }
+ } else {
+ if (!atomic_load_acq_long(&sc->cq_spq_left)) {
+ PMD_DRV_LOG(INFO, "SPQ ring is full!");
+ return -1;
+ }
+ }
+
+ spe = bnx2x_sp_get_next(sc);
+
+ /* CID needs port number to be encoded int it */
+ spe->hdr.conn_and_cmd_data =
+ htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
+
+ type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
+
+ /* TBD: Check if it works for VFs */
+ type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
+ SPE_HDR_FUNCTION_ID);
+
+ spe->hdr.type = htole16(type);
+
+ spe->data.update_data_addr.hi = htole32(data_hi);
+ spe->data.update_data_addr.lo = htole32(data_lo);
+
+ /*
+ * It's ok if the actual decrement is issued towards the memory
+ * somewhere between the lock and unlock. Thus no more explict
+ * memory barrier is needed.
+ */
+ if (common) {
+ atomic_subtract_acq_long(&sc->eq_spq_left, 1);
+ } else {
+ atomic_subtract_acq_long(&sc->cq_spq_left, 1);
+ }
+
+ PMD_DRV_LOG(DEBUG,
+ "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
+ "data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
+ sc->spq_prod_idx,
+ (uint32_t) U64_HI(sc->spq_dma.paddr),
+ (uint32_t) (U64_LO(sc->spq_dma.paddr) +
+ (uint8_t *) sc->spq_prod_bd -
+ (uint8_t *) sc->spq), command, common,
+ HW_CID(sc, cid), data_hi, data_lo, type,
+ atomic_load_acq_long(&sc->cq_spq_left),
+ atomic_load_acq_long(&sc->eq_spq_left));
+
+ bnx2x_sp_prod_update(sc);
+
+ return 0;
+}
+
+static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
+{
+ SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
+ sc->fw_drv_pulse_wr_seq);
+}
+
+static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
+{
+ uint16_t hw_cons;
+ struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+ if (unlikely(!txq)) {
+ PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+ return 0;
+ }
+
+ mb(); /* status block fields can change */
+ hw_cons = le16toh(*fp->tx_cons_sb);
+ return (hw_cons != txq->tx_pkt_head);
+}
+
+static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+ /* expand this for multi-cos if ever supported */
+ return bnx2x_tx_queue_has_work(fp);
+}
+
+static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+ uint16_t rx_cq_cons_sb;
+ struct bnx2x_rx_queue *rxq;
+ rxq = fp->sc->rx_queues[fp->index];
+ if (unlikely(!rxq)) {
+ PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
+ return 0;
+ }
+
+ mb(); /* status block fields can change */
+ rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
+ if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
+ MAX_RCQ_ENTRIES(rxq)))
+ rx_cq_cons_sb++;
+ return (rxq->rx_cq_head != rx_cq_cons_sb);
+}
+
+static void
+bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ union eth_rx_cqe *rr_cqe)
+{
+#ifdef RTE_LIBRTE_BNX2X_DEBUG
+ int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+#endif
+ int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
+ enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
+ struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
+
+ PMD_DRV_LOG(DEBUG,
+ "fp=%d cid=%d got ramrod #%d state is %x type is %d",
+ fp->index, cid, command, sc->state,
+ rr_cqe->ramrod_cqe.ramrod_type);
+
+ switch (command) {
+ case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
+ PMD_DRV_LOG(DEBUG, "got UPDATE ramrod. CID %d", cid);
+ drv_cmd = ECORE_Q_CMD_UPDATE;
+ break;
+
+ case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
+ PMD_DRV_LOG(DEBUG, "got MULTI[%d] setup ramrod", cid);
+ drv_cmd = ECORE_Q_CMD_SETUP;
+ break;
+
+ case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
+ PMD_DRV_LOG(DEBUG, "got MULTI[%d] tx-only setup ramrod", cid);
+ drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
+ break;
+
+ case (RAMROD_CMD_ID_ETH_HALT):
+ PMD_DRV_LOG(DEBUG, "got MULTI[%d] halt ramrod", cid);
+ drv_cmd = ECORE_Q_CMD_HALT;
+ break;
+
+ case (RAMROD_CMD_ID_ETH_TERMINATE):
+ PMD_DRV_LOG(DEBUG, "got MULTI[%d] teminate ramrod", cid);
+ drv_cmd = ECORE_Q_CMD_TERMINATE;
+ break;
+
+ case (RAMROD_CMD_ID_ETH_EMPTY):
+ PMD_DRV_LOG(DEBUG, "got MULTI[%d] empty ramrod", cid);
+ drv_cmd = ECORE_Q_CMD_EMPTY;
+ break;
+
+ default:
+ PMD_DRV_LOG(DEBUG,
+ "ERROR: unexpected MC reply (%d)"
+ "on fp[%d]", command, fp->index);
+ return;
+ }
+
+ if ((drv_cmd != ECORE_Q_CMD_MAX) &&
+ q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
+ /*
+ * q_obj->complete_cmd() failure means that this was
+ * an unexpected completion.
+ *
+ * In this case we don't want to increase the sc->spq_left
+ * because apparently we haven't sent this command the first
+ * place.
+ */
+ // rte_panic("Unexpected SP completion");
+ return;
+ }
+
+ atomic_add_acq_long(&sc->cq_spq_left, 1);
+
+ PMD_DRV_LOG(DEBUG, "sc->cq_spq_left 0x%lx",
+ atomic_load_acq_long(&sc->cq_spq_left));
+}
+
+static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
+{
+ struct bnx2x_rx_queue *rxq;
+ uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
+ uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
+
+ rxq = sc->rx_queues[fp->index];
+ if (!rxq) {
+ PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
+ return 0;
+ }
+
+ /* CQ "next element" is of the size of the regular element */
+ hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
+ if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
+ USABLE_RCQ_ENTRIES_PER_PAGE)) {
+ hw_cq_cons++;
+ }
+
+ bd_cons = rxq->rx_bd_head;
+ bd_prod = rxq->rx_bd_tail;
+ bd_prod_fw = bd_prod;
+ sw_cq_cons = rxq->rx_cq_head;
+ sw_cq_prod = rxq->rx_cq_tail;
+
+ /*
+ * Memory barrier necessary as speculative reads of the rx
+ * buffer can be ahead of the index in the status block
+ */
+ rmb();
+
+ while (sw_cq_cons != hw_cq_cons) {
+ union eth_rx_cqe *cqe;
+ struct eth_fast_path_rx_cqe *cqe_fp;
+ uint8_t cqe_fp_flags;
+ enum eth_rx_cqe_type cqe_fp_type;
+
+ comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
+ bd_prod = RX_BD(bd_prod, rxq);
+ bd_cons = RX_BD(bd_cons, rxq);
+
+ cqe = &rxq->cq_ring[comp_ring_cons];
+ cqe_fp = &cqe->fast_path_cqe;
+ cqe_fp_flags = cqe_fp->type_error_flags;
+ cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
+
+ /* is this a slowpath msg? */
+ if (CQE_TYPE_SLOW(cqe_fp_type)) {
+ bnx2x_sp_event(sc, fp, cqe);
+ goto next_cqe;
+ }
+
+ /* is this an error packet? */
+ if (unlikely(cqe_fp_flags &
+ ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
+ PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
+ cqe_fp_flags, sw_cq_cons);
+ goto next_rx;
+ }
+
+ PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");
+
+next_rx:
+ bd_cons = NEXT_RX_BD(bd_cons);
+ bd_prod = NEXT_RX_BD(bd_prod);
+ bd_prod_fw = NEXT_RX_BD(bd_prod_fw);
+
+next_cqe:
+ sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
+ sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);
+
+ } /* while work to do */
+
+ rxq->rx_bd_head = bd_cons;
+ rxq->rx_bd_tail = bd_prod_fw;
+ rxq->rx_cq_head = sw_cq_cons;
+ rxq->rx_cq_tail = sw_cq_prod;
+
+ /* Update producers */
+ bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);
+
+ return (sw_cq_cons != hw_cq_cons);
+}
+
+static uint16_t
+bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
+ uint16_t pkt_idx, uint16_t bd_idx)
+{
+ struct eth_tx_start_bd *tx_start_bd =
+ &txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
+ uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
+ struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];
+
+ if (likely(tx_mbuf != NULL)) {
+ rte_pktmbuf_free(tx_mbuf);
+ } else {
+ PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
+ fp->index, TX_BD(pkt_idx, txq));
+ }
+
+ txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
+ txq->nb_tx_avail += nbd;
+
+ while (nbd--)
+ bd_idx = NEXT_TX_BD(bd_idx);
+
+ return bd_idx;
+}
+
+/* processes transmit completions */
+uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
+{
+ uint16_t bd_cons, hw_cons, sw_cons;
+ __rte_unused uint16_t tx_bd_avail;
+
+ struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+ if (unlikely(!txq)) {
+ PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+ return 0;
+ }
+
+ bd_cons = txq->tx_bd_head;
+ hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
+ sw_cons = txq->tx_pkt_head;
+
+ while (sw_cons != hw_cons) {
+ bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
+ sw_cons++;
+ }
+
+ txq->tx_pkt_head = sw_cons;
+ txq->tx_bd_head = bd_cons;
+
+ tx_bd_avail = txq->nb_tx_avail;
+
+ PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
+ "pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
+ fp->index, tx_bd_avail, hw_cons,
+ txq->tx_pkt_head, txq->tx_pkt_tail,
+ txq->tx_bd_head, txq->tx_bd_tail);
+ return TRUE;
+}
+
+static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
+{
+ struct bnx2x_fastpath *fp;
+ int i, count;
+
+ /* wait until all TX fastpath tasks have completed */
+ for (i = 0; i < sc->num_queues; i++) {
+ fp = &sc->fp[i];
+
+ count = 1000;
+
+ while (bnx2x_has_tx_work(fp)) {
+ bnx2x_txeof(sc, fp);
+
+ if (count == 0) {
+ PMD_TX_LOG(ERR,
+ "Timeout waiting for fp[%d] "
+ "transmits to complete!", i);
+ rte_panic("tx drain failure");
+ return;
+ }
+
+ count--;
+ DELAY(1000);
+ rmb();
+ }
+ }
+
+ return;
+}
+
+static int
+bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
+ int mac_type, uint8_t wait_for_comp)
+{
+ unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+ int rc;
+
+ /* wait for completion of requested */
+ if (wait_for_comp) {
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ }
+
+ /* Set the mac type of addresses we want to clear */
+ bnx2x_set_bit(mac_type, &vlan_mac_flags);
+
+ rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
+ if (rc < 0)
+ PMD_DRV_LOG(ERR, "Failed to delete MACs (%d)", rc);
+
+ return rc;
+}
+
+int
+bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
+ unsigned long *rx_accept_flags,
+ unsigned long *tx_accept_flags)
+{
+ /* Clear the flags first */
+ *rx_accept_flags = 0;
+ *tx_accept_flags = 0;
+
+ switch (rx_mode) {
+ case BNX2X_RX_MODE_NONE:
+ /*
+ * 'drop all' supersedes any accept flags that may have been
+ * passed to the function.
+ */
+ break;
+
+ case BNX2X_RX_MODE_NORMAL:
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+ /* internal switching mode */
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+ break;
+
+ case BNX2X_RX_MODE_ALLMULTI:
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+ /* internal switching mode */
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+ break;
+
+ case BNX2X_RX_MODE_PROMISC:
+ /*
+ * According to deffinition of SI mode, iface in promisc mode
+ * should receive matched and unmatched (in resolution of port)
+ * unicast packets.
+ */
+ bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+
+ /* internal switching mode */
+ bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+
+ if (IS_MF_SI(sc)) {
+ bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
+ } else {
+ bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ }
+
+ break;
+
+ default:
+ PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
+ return -1;
+ }
+
+ /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
+ if (rx_mode != BNX2X_RX_MODE_NONE) {
+ bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
+ bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
+ }
+
+ return 0;
+}
+
+static int
+bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
+ unsigned long rx_mode_flags,
+ unsigned long rx_accept_flags,
+ unsigned long tx_accept_flags, unsigned long ramrod_flags)
+{
+ struct ecore_rx_mode_ramrod_params ramrod_param;
+ int rc;
+
+ memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+ /* Prepare ramrod parameters */
+ ramrod_param.cid = 0;
+ ramrod_param.cl_id = cl_id;
+ ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
+ ramrod_param.func_id = SC_FUNC(sc);
+
+ ramrod_param.pstate = &sc->sp_state;
+ ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
+
+ ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
+ ramrod_param.rdata_mapping =
+ (phys_addr_t) ((void *)BNX2X_SP_MAPPING(sc, rx_mode_rdata)),
+ bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+
+ ramrod_param.ramrod_flags = ramrod_flags;
+ ramrod_param.rx_mode_flags = rx_mode_flags;
+
+ ramrod_param.rx_accept_flags = rx_accept_flags;
+ ramrod_param.tx_accept_flags = tx_accept_flags;
+
+ rc = ecore_config_rx_mode(sc, &ramrod_param);
+ if (rc < 0) {
+ PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
+ return rc;
+ }
+
+ return 0;
+}
+
+int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
+{
+ unsigned long rx_mode_flags = 0, ramrod_flags = 0;
+ unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
+ int rc;
+
+ rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
+ &tx_accept_flags);
+ if (rc) {
+ return rc;
+ }
+
+ bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
+ bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+
+ return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
+ rx_accept_flags, tx_accept_flags,
+ ramrod_flags);
+}
+
+/* returns the "mcp load_code" according to global load_count array */
+static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
+{
+ int path = SC_PATH(sc);
+ int port = SC_PORT(sc);
+
+ PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+
+ load_count[path][0]++;
+ load_count[path][1 + port]++;
+ PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ if (load_count[path][0] == 1)
+ return FW_MSG_CODE_DRV_LOAD_COMMON;
+ else if (load_count[path][1 + port] == 1)
+ return FW_MSG_CODE_DRV_LOAD_PORT;
+ else
+ return FW_MSG_CODE_DRV_LOAD_FUNCTION;
+}
+
+/* returns the "mcp load_code" according to global load_count array */
+static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ int path = SC_PATH(sc);
+
+ PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ load_count[path][0]--;
+ load_count[path][1 + port]--;
+ PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ if (load_count[path][0] == 0) {
+ return FW_MSG_CODE_DRV_UNLOAD_COMMON;
+ } else if (load_count[path][1 + port] == 0) {
+ return FW_MSG_CODE_DRV_UNLOAD_PORT;
+ } else {
+ return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
+ }
+}
+
+/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
+static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
+{
+ uint32_t reset_code = 0;
+
+ /* Select the UNLOAD request mode */
+ if (unload_mode == UNLOAD_NORMAL) {
+ reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+ } else {
+ reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+ }
+
+ /* Send the request to the MCP */
+ if (!BNX2X_NOMCP(sc)) {
+ reset_code = bnx2x_fw_command(sc, reset_code, 0);
+ } else {
+ reset_code = bnx2x_nic_unload_no_mcp(sc);
+ }
+
+ return reset_code;
+}
+
+/* send UNLOAD_DONE command to the MCP */
+static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
+{
+ uint32_t reset_param =
+ keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
+
+ /* Report UNLOAD_DONE to MCP */
+ if (!BNX2X_NOMCP(sc)) {
+ bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
+ }
+}
+
+static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
+{
+ int tout = 50;
+
+ if (!sc->port.pmf) {
+ return 0;
+ }
+
+ /*
+ * (assumption: No Attention from MCP at this stage)
+ * PMF probably in the middle of TX disable/enable transaction
+ * 1. Sync IRS for default SB
+ * 2. Sync SP queue - this guarantees us that attention handling started
+ * 3. Wait, that TX disable/enable transaction completes
+ *
+ * 1+2 guarantee that if DCBX attention was scheduled it already changed
+ * pending bit of transaction from STARTED-->TX_STOPPED, if we already
+ * received completion for the transaction the state is TX_STOPPED.
+ * State will return to STARTED after completion of TX_STOPPED-->STARTED
+ * transaction.
+ */
+
+ while (ecore_func_get_state(sc, &sc->func_obj) !=
+ ECORE_F_STATE_STARTED && tout--) {
+ DELAY(20000);
+ }
+
+ if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
+ /*
+ * Failed to complete the transaction in a "good way"
+ * Force both transactions with CLR bit.
+ */
+ struct ecore_func_state_params func_params = { NULL };
+
+ PMD_DRV_LOG(NOTICE, "Unexpected function state! "
+ "Forcing STARTED-->TX_STOPPED-->STARTED");
+
+ func_params.f_obj = &sc->func_obj;
+ bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+
+ /* STARTED-->TX_STOPPED */
+ func_params.cmd = ECORE_F_CMD_TX_STOP;
+ ecore_func_state_change(sc, &func_params);
+
+ /* TX_STOPPED-->STARTED */
+ func_params.cmd = ECORE_F_CMD_TX_START;
+ return ecore_func_state_change(sc, &func_params);
+ }
+
+ return 0;
+}
+
+static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
+{
+ struct bnx2x_fastpath *fp = &sc->fp[index];
+ struct ecore_queue_state_params q_params = { NULL };
+ int rc;
+
+ PMD_DRV_LOG(DEBUG, "stopping queue %d cid %d", index, fp->index);
+
+ q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
+ /* We want to wait for completion in this context */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+ /* Stop the primary connection: */
+
+ /* ...halt the connection */
+ q_params.cmd = ECORE_Q_CMD_HALT;
+ rc = ecore_queue_state_change(sc, &q_params);
+ if (rc) {
+ return rc;
+ }
+
+ /* ...terminate the connection */
+ q_params.cmd = ECORE_Q_CMD_TERMINATE;
+ memset(&q_params.params.terminate, 0,
+ sizeof(q_params.params.terminate));
+ q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
+ rc = ecore_queue_state_change(sc, &q_params);
+ if (rc) {
+ return rc;
+ }
+
+ /* ...delete cfc entry */
+ q_params.cmd = ECORE_Q_CMD_CFC_DEL;
+ memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
+ q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
+ return ecore_queue_state_change(sc, &q_params);
+}
+
+/* wait for the outstanding SP commands */
+static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
+{
+ unsigned long tmp;
+ int tout = 5000; /* wait for 5 secs tops */
+
+ while (tout--) {
+ mb();
+ if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
+ return TRUE;
+ }
+
+ DELAY(1000);
+ }
+
+ mb();
+
+ tmp = atomic_load_acq_long(&sc->sp_state);
+ if (tmp & mask) {
+ PMD_DRV_LOG(INFO, "Filtering completion timed out: "
+ "sp_state 0x%lx, mask 0x%lx", tmp, mask);
+ return FALSE;
+ }
+
+ return FALSE;
+}
+
+static int bnx2x_func_stop(struct bnx2x_softc *sc)
+{
+ struct ecore_func_state_params func_params = { NULL };
+ int rc;
+
+ /* prepare parameters for function state transitions */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+ func_params.f_obj = &sc->func_obj;
+ func_params.cmd = ECORE_F_CMD_STOP;
+
+ /*
+ * Try to stop the function the 'good way'. If it fails (in case
+ * of a parity error during bnx2x_chip_cleanup()) and we are
+ * not in a debug mode, perform a state transaction in order to
+ * enable further HW_RESET transaction.
+ */
+ rc = ecore_func_state_change(sc, &func_params);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "FUNC_STOP ramrod failed. "
+ "Running a dry transaction");
+ bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+ return ecore_func_state_change(sc, &func_params);
+ }
+
+ return 0;
+}
+
+static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
+{
+ struct ecore_func_state_params func_params = { NULL };
+
+ /* Prepare parameters for function state transitions */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+ func_params.f_obj = &sc->func_obj;
+ func_params.cmd = ECORE_F_CMD_HW_RESET;
+
+ func_params.params.hw_init.load_phase = load_code;
+
+ return ecore_func_state_change(sc, &func_params);
+}
+
+static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
+{
+ if (disable_hw) {
+ /* prevent the HW from sending interrupts */
+ bnx2x_int_disable(sc);
+ }
+}
+
+static void
+bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
+{
+ int port = SC_PORT(sc);
+ struct ecore_mcast_ramrod_params rparam = { NULL };
+ uint32_t reset_code;
+ int i, rc = 0;
+
+ bnx2x_drain_tx_queues(sc);
+
+ /* give HW time to discard old tx messages */
+ DELAY(1000);
+
+ /* Clean all ETH MACs */
+ rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
+ FALSE);
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to delete all ETH MACs (%d)", rc);
+ }
+
+ /* Clean up UC list */
+ rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
+ TRUE);
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to delete UC MACs list (%d)", rc);
+ }
+
+ /* Disable LLH */
+ REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
+
+ /* Set "drop all" to stop Rx */
+
+ /*
+ * We need to take the if_maddr_lock() here in order to prevent
+ * a race between the completion code and this code.
+ */
+
+ if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
+ bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
+ } else {
+ bnx2x_set_storm_rx_mode(sc);
+ }
+
+ /* Clean up multicast configuration */
+ rparam.mcast_obj = &sc->mcast_obj;
+ rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE,
+ "Failed to send DEL MCAST command (%d)", rc);
+ }
+
+ /*
+ * Send the UNLOAD_REQUEST to the MCP. This will return if
+ * this function should perform FUNCTION, PORT, or COMMON HW
+ * reset.
+ */
+ reset_code = bnx2x_send_unload_req(sc, unload_mode);
+
+ /*
+ * (assumption: No Attention from MCP at this stage)
+ * PMF probably in the middle of TX disable/enable transaction
+ */
+ rc = bnx2x_func_wait_started(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "bnx2x_func_wait_started failed");
+ }
+
+ /*
+ * Close multi and leading connections
+ * Completions for ramrods are collected in a synchronous way
+ */
+ for (i = 0; i < sc->num_queues; i++) {
+ if (bnx2x_stop_queue(sc, i)) {
+ goto unload_error;
+ }
+ }
+
+ /*
+ * If SP settings didn't get completed so far - something
+ * very wrong has happen.
+ */
+ if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
+ PMD_DRV_LOG(NOTICE, "Common slow path ramrods got stuck!");
+ }
+
+unload_error:
+
+ rc = bnx2x_func_stop(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Function stop failed!");
+ }
+
+ /* disable HW interrupts */
+ bnx2x_int_disable_sync(sc, TRUE);
+
+ /* Reset the chip */
+ rc = bnx2x_reset_hw(sc, reset_code);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Hardware reset failed");
+ }
+
+ /* Report UNLOAD_DONE to MCP */
+ bnx2x_send_unload_done(sc, keep_link);
+}
+
+static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+
+ PMD_DRV_LOG(DEBUG, "Disabling 'close the gates'");
+
+ val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
+ val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
+ MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
+ REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
+}
+
+/*
+ * Cleans the object that have internal lists without sending
+ * ramrods. Should be run when interrutps are disabled.
+ */
+static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
+{
+ unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+ struct ecore_mcast_ramrod_params rparam = { NULL };
+ struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
+ int rc;
+
+ /* Cleanup MACs' object first... */
+
+ /* Wait for completion of requested */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ /* Perform a dry cleanup */
+ bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
+
+ /* Clean ETH primary MAC */
+ bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
+ rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
+ &ramrod_flags);
+ if (rc != 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to clean ETH MACs (%d)", rc);
+ }
+
+ /* Cleanup UC list */
+ vlan_mac_flags = 0;
+ bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
+ rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
+ if (rc != 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to clean UC list MACs (%d)", rc);
+ }
+
+ /* Now clean mcast object... */
+
+ rparam.mcast_obj = &sc->mcast_obj;
+ bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
+
+ /* Add a DEL command... */
+ rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE,
+ "Failed to send DEL MCAST command (%d)", rc);
+ }
+
+ /* now wait until all pending commands are cleared */
+
+ rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+ while (rc != 0) {
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE,
+ "Failed to clean MCAST object (%d)", rc);
+ return;
+ }
+
+ rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+ }
+}
+
+/* stop the controller */
+__attribute__ ((noinline))
+int
+bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
+{
+ uint8_t global = FALSE;
+ uint32_t val;
+
+ PMD_DRV_LOG(DEBUG, "Starting NIC unload...");
+
+ /* stop the periodic callout */
+ bnx2x_periodic_stop(sc);
+
+ /* mark driver as unloaded in shmem2 */
+ if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
+ val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
+ SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
+ val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
+ }
+
+ if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
+ (sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
+ /*
+ * We can get here if the driver has been unloaded
+ * during parity error recovery and is either waiting for a
+ * leader to complete or for other functions to unload and
+ * then ifconfig down has been issued. In this case we want to
+ * unload and let other functions to complete a recovery
+ * process.
+ */
+ sc->recovery_state = BNX2X_RECOVERY_DONE;
+ sc->is_leader = 0;
+ bnx2x_release_leader_lock(sc);
+ mb();
+
+ PMD_DRV_LOG(NOTICE, "Can't unload in closed or error state");
+ return -1;
+ }
+
+ /*
+ * Nothing to do during unload if previous bnx2x_nic_load()
+ * did not completed succesfully - all resourses are released.
+ */
+ if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
+ return 0;
+ }
+
+ sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
+ mb();
+
+ sc->rx_mode = BNX2X_RX_MODE_NONE;
+ bnx2x_set_rx_mode(sc);
+ mb();
+
+ if (IS_PF(sc)) {
+ /* set ALWAYS_ALIVE bit in shmem */
+ sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+
+ bnx2x_drv_pulse(sc);
+
+ bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+ bnx2x_save_statistics(sc);
+ }
+
+ /* wait till consumers catch up with producers in all queues */
+ bnx2x_drain_tx_queues(sc);
+
+ /* if VF indicate to PF this function is going down (PF will delete sp
+ * elements and clear initializations
+ */
+ if (IS_VF(sc)) {
+ bnx2x_vf_unload(sc);
+ } else if (unload_mode != UNLOAD_RECOVERY) {
+ /* if this is a normal/close unload need to clean up chip */
+ bnx2x_chip_cleanup(sc, unload_mode, keep_link);
+ } else {
+ /* Send the UNLOAD_REQUEST to the MCP */
+ bnx2x_send_unload_req(sc, unload_mode);
+
+ /*
+ * Prevent transactions to host from the functions on the
+ * engine that doesn't reset global blocks in case of global
+ * attention once gloabl blocks are reset and gates are opened
+ * (the engine which leader will perform the recovery
+ * last).
+ */
+ if (!CHIP_IS_E1x(sc)) {
+ bnx2x_pf_disable(sc);
+ }
+
+ /* disable HW interrupts */
+ bnx2x_int_disable_sync(sc, TRUE);
+
+ /* Report UNLOAD_DONE to MCP */
+ bnx2x_send_unload_done(sc, FALSE);
+ }
+
+ /*
+ * At this stage no more interrupts will arrive so we may safely clean
+ * the queue'able objects here in case they failed to get cleaned so far.
+ */
+ if (IS_PF(sc)) {
+ bnx2x_squeeze_objects(sc);
+ }
+
+ /* There should be no more pending SP commands at this stage */
+ sc->sp_state = 0;
+
+ sc->port.pmf = 0;
+
+ if (IS_PF(sc)) {
+ bnx2x_free_mem(sc);
+ }
+
+ bnx2x_free_fw_stats_mem(sc);
+
+ sc->state = BNX2X_STATE_CLOSED;
+
+ /*
+ * Check if there are pending parity attentions. If there are - set
+ * RECOVERY_IN_PROGRESS.
+ */
+ if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
+ bnx2x_set_reset_in_progress(sc);
+
+ /* Set RESET_IS_GLOBAL if needed */
+ if (global) {
+ bnx2x_set_reset_global(sc);
+ }
+ }
+
+ /*
+ * The last driver must disable a "close the gate" if there is no
+ * parity attention or "process kill" pending.
+ */
+ if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
+ bnx2x_reset_is_done(sc, SC_PATH(sc))) {
+ bnx2x_disable_close_the_gate(sc);
+ }
+
+ PMD_DRV_LOG(DEBUG, "Ended NIC unload");
+
+ return 0;
+}
+
+/*
+ * Encapsulte an mbuf cluster into the tx bd chain and makes the memory
+ * visible to the controller.
+ *
+ * If an mbuf is submitted to this routine and cannot be given to the
+ * controller (e.g. it has too many fragments) then the function may free
+ * the mbuf and return to the caller.
+ *
+ * Returns:
+ * 0 = Success, !0 = Failure
+ * Note the side effect that an mbuf may be freed if it causes a problem.
+ */
+int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf **m_head, int m_pkts)
+{
+ struct rte_mbuf *m0;
+ struct eth_tx_start_bd *tx_start_bd;
+ uint16_t bd_prod, pkt_prod;
+ int m_tx;
+ struct bnx2x_softc *sc;
+ uint32_t nbds = 0;
+ struct bnx2x_fastpath *fp;
+
+ sc = txq->sc;
+ fp = &sc->fp[txq->queue_id];
+
+ bd_prod = txq->tx_bd_tail;
+ pkt_prod = txq->tx_pkt_tail;
+
+ for (m_tx = 0; m_tx < m_pkts; m_tx++) {
+
+ m0 = *m_head++;
+
+ if (unlikely(txq->nb_tx_avail < 3)) {
+ PMD_TX_LOG(ERR, "no enough bds %d/%d",
+ bd_prod, txq->nb_tx_avail);
+ return -ENOMEM;
+ }
+
+ txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;
+
+ tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;
+
+ tx_start_bd->addr =
+ rte_cpu_to_le_64(RTE_MBUF_DATA_DMA_ADDR(m0));
+ tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
+ tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+ tx_start_bd->general_data =
+ (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
+
+ tx_start_bd->nbd = rte_cpu_to_le_16(2);
+
+ if (m0->ol_flags & PKT_TX_VLAN_PKT) {
+ tx_start_bd->vlan_or_ethertype =
+ rte_cpu_to_le_16(m0->vlan_tci);
+ tx_start_bd->bd_flags.as_bitfield |=
+ (X_ETH_OUTBAND_VLAN <<
+ ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+ } else {
+ if (IS_PF(sc))
+ tx_start_bd->vlan_or_ethertype =
+ rte_cpu_to_le_16(pkt_prod);
+ else {
+ struct ether_hdr *eh
+ = rte_pktmbuf_mtod(m0, struct ether_hdr *);
+
+ tx_start_bd->vlan_or_ethertype = eh->ether_type;
+ }
+ }
+
+ bd_prod = NEXT_TX_BD(bd_prod);
+ if (IS_VF(sc)) {
+ struct eth_tx_parse_bd_e2 *tx_parse_bd;
+ uint8_t *data = rte_pktmbuf_mtod(m0, uint8_t *);
+
+ tx_parse_bd =
+ &txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
+ tx_parse_bd->parsing_data =
+ (1 << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);
+
+ rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
+ &data[0], 2);
+ rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
+ &data[2], 2);
+ rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
+ &data[4], 2);
+ rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
+ &data[6], 2);
+ rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
+ &data[8], 2);
+ rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
+ &data[10], 2);
+
+ tx_parse_bd->data.mac_addr.dst_hi =
+ rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
+ tx_parse_bd->data.mac_addr.dst_mid =
+ rte_cpu_to_be_16(tx_parse_bd->data.
+ mac_addr.dst_mid);
+ tx_parse_bd->data.mac_addr.dst_lo =
+ rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
+ tx_parse_bd->data.mac_addr.src_hi =
+ rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
+ tx_parse_bd->data.mac_addr.src_mid =
+ rte_cpu_to_be_16(tx_parse_bd->data.
+ mac_addr.src_mid);
+ tx_parse_bd->data.mac_addr.src_lo =
+ rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);
+
+ PMD_TX_LOG(DEBUG,
+ "PBD dst %x %x %x src %x %x %x p_data %x",
+ tx_parse_bd->data.mac_addr.dst_hi,
+ tx_parse_bd->data.mac_addr.dst_mid,
+ tx_parse_bd->data.mac_addr.dst_lo,
+ tx_parse_bd->data.mac_addr.src_hi,
+ tx_parse_bd->data.mac_addr.src_mid,
+ tx_parse_bd->data.mac_addr.src_lo,
+ tx_parse_bd->parsing_data);
+ }
+
+ PMD_TX_LOG(DEBUG,
+ "start bd: nbytes %d flags %x vlan %x\n",
+ tx_start_bd->nbytes,
+ tx_start_bd->bd_flags.as_bitfield,
+ tx_start_bd->vlan_or_ethertype);
+
+ bd_prod = NEXT_TX_BD(bd_prod);
+ pkt_prod++;
+
+ if (TX_IDX(bd_prod) < 2) {
+ nbds++;
+ }
+ }
+
+ txq->nb_tx_avail -= m_pkts << 1;
+ txq->tx_bd_tail = bd_prod;
+ txq->tx_pkt_tail = pkt_prod;
+
+ mb();
+ fp->tx_db.data.prod += (m_pkts << 1) + nbds;
+ DOORBELL(sc, txq->queue_id, fp->tx_db.raw);
+ mb();
+
+ return 0;
+}
+
+static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
+{
+ return L2_ILT_LINES(sc);
+}
+
+static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
+{
+ struct ilt_client_info *ilt_client;
+ struct ecore_ilt *ilt = sc->ilt;
+ uint16_t line = 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
+
+ /* CDU */
+ ilt_client = &ilt->clients[ILT_CLIENT_CDU];
+ ilt_client->client_num = ILT_CLIENT_CDU;
+ ilt_client->page_size = CDU_ILT_PAGE_SZ;
+ ilt_client->flags = ILT_CLIENT_SKIP_MEM;
+ ilt_client->start = line;
+ line += bnx2x_cid_ilt_lines(sc);
+
+ if (CNIC_SUPPORT(sc)) {
+ line += CNIC_ILT_LINES;
+ }
+
+ ilt_client->end = (line - 1);
+
+ /* QM */
+ if (QM_INIT(sc->qm_cid_count)) {
+ ilt_client = &ilt->clients[ILT_CLIENT_QM];
+ ilt_client->client_num = ILT_CLIENT_QM;
+ ilt_client->page_size = QM_ILT_PAGE_SZ;
+ ilt_client->flags = 0;
+ ilt_client->start = line;
+
+ /* 4 bytes for each cid */
+ line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
+ QM_ILT_PAGE_SZ);
+
+ ilt_client->end = (line - 1);
+ }
+
+ if (CNIC_SUPPORT(sc)) {
+ /* SRC */
+ ilt_client = &ilt->clients[ILT_CLIENT_SRC];
+ ilt_client->client_num = ILT_CLIENT_SRC;
+ ilt_client->page_size = SRC_ILT_PAGE_SZ;
+ ilt_client->flags = 0;
+ ilt_client->start = line;
+ line += SRC_ILT_LINES;
+ ilt_client->end = (line - 1);
+
+ /* TM */
+ ilt_client = &ilt->clients[ILT_CLIENT_TM];
+ ilt_client->client_num = ILT_CLIENT_TM;
+ ilt_client->page_size = TM_ILT_PAGE_SZ;
+ ilt_client->flags = 0;
+ ilt_client->start = line;
+ line += TM_ILT_LINES;
+ ilt_client->end = (line - 1);
+ }
+
+ assert((line <= ILT_MAX_LINES));
+}
+
+static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
+{
+ int i;
+
+ for (i = 0; i < sc->num_queues; i++) {
+ /* get the Rx buffer size for RX frames */
+ sc->fp[i].rx_buf_size =
+ (IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
+
+ /* get the mbuf allocation size for RX frames */
+ if (sc->fp[i].rx_buf_size <= MCLBYTES) {
+ sc->fp[i].mbuf_alloc_size = MCLBYTES;
+ } else if (sc->fp[i].rx_buf_size <= BNX2X_PAGE_SIZE) {
+ sc->fp[i].mbuf_alloc_size = PAGE_SIZE;
+ } else {
+ sc->fp[i].mbuf_alloc_size = MJUM9BYTES;
+ }
+ }
+}
+
+int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
+{
+
+ sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);
+
+ return sc->ilt == NULL;
+}
+
+static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
+{
+ sc->ilt->lines = rte_calloc("",
+ sizeof(struct ilt_line), ILT_MAX_LINES,
+ RTE_CACHE_LINE_SIZE);
+ return sc->ilt->lines == NULL;
+}
+
+void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
+{
+ rte_free(sc->ilt);
+ sc->ilt = NULL;
+}
+
+static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
+{
+ if (sc->ilt->lines != NULL) {
+ rte_free(sc->ilt->lines);
+ sc->ilt->lines = NULL;
+ }
+}
+
+static void bnx2x_free_mem(struct bnx2x_softc *sc)
+{
+ uint32_t i;
+
+ for (i = 0; i < L2_ILT_LINES(sc); i++) {
+ sc->context[i].vcxt = NULL;
+ sc->context[i].size = 0;
+ }
+
+ ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
+
+ bnx2x_free_ilt_lines_mem(sc);
+}
+
+static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
+{
+ int context_size;
+ int allocated;
+ int i;
+ char cdu_name[RTE_MEMZONE_NAMESIZE];
+
+ /*
+ * Allocate memory for CDU context:
+ * This memory is allocated separately and not in the generic ILT
+ * functions because CDU differs in few aspects:
+ * 1. There can be multiple entities allocating memory for context -
+ * regular L2, CNIC, and SRIOV drivers. Each separately controls
+ * its own ILT lines.
+ * 2. Since CDU page-size is not a single 4KB page (which is the case
+ * for the other ILT clients), to be efficient we want to support
+ * allocation of sub-page-size in the last entry.
+ * 3. Context pointers are used by the driver to pass to FW / update
+ * the context (for the other ILT clients the pointers are used just to
+ * free the memory during unload).
+ */
+ context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
+ for (i = 0, allocated = 0; allocated < context_size; i++) {
+ sc->context[i].size = min(CDU_ILT_PAGE_SZ,
+ (context_size - allocated));
+
+ snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
+ if (bnx2x_dma_alloc(sc, sc->context[i].size,
+ &sc->context[i].vcxt_dma,
+ cdu_name, BNX2X_PAGE_SIZE) != 0) {
+ bnx2x_free_mem(sc);
+ return -1;
+ }
+
+ sc->context[i].vcxt =
+ (union cdu_context *)sc->context[i].vcxt_dma.vaddr;
+
+ allocated += sc->context[i].size;
+ }
+
+ bnx2x_alloc_ilt_lines_mem(sc);
+
+ if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
+ PMD_DRV_LOG(NOTICE, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
+ bnx2x_free_mem(sc);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
+{
+ sc->fw_stats_num = 0;
+
+ sc->fw_stats_req_size = 0;
+ sc->fw_stats_req = NULL;
+ sc->fw_stats_req_mapping = 0;
+
+ sc->fw_stats_data_size = 0;
+ sc->fw_stats_data = NULL;
+ sc->fw_stats_data_mapping = 0;
+}
+
+static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
+{
+ uint8_t num_queue_stats;
+ int num_groups, vf_headroom = 0;
+
+ /* number of queues for statistics is number of eth queues */
+ num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);
+
+ /*
+ * Total number of FW statistics requests =
+ * 1 for port stats + 1 for PF stats + num of queues
+ */
+ sc->fw_stats_num = (2 + num_queue_stats);
+
+ /*
+ * Request is built from stats_query_header and an array of
+ * stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
+ * rules. The real number or requests is configured in the
+ * stats_query_header.
+ */
+ num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
+ if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
+ num_groups++;
+
+ sc->fw_stats_req_size =
+ (sizeof(struct stats_query_header) +
+ (num_groups * sizeof(struct stats_query_cmd_group)));
+
+ /*
+ * Data for statistics requests + stats_counter.
+ * stats_counter holds per-STORM counters that are incremented when
+ * STORM has finished with the current request. Memory for FCoE
+ * offloaded statistics are counted anyway, even if they will not be sent.
+ * VF stats are not accounted for here as the data of VF stats is stored
+ * in memory allocated by the VF, not here.
+ */
+ sc->fw_stats_data_size =
+ (sizeof(struct stats_counter) +
+ sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
+ /* sizeof(struct fcoe_statistics_params) + */
+ (sizeof(struct per_queue_stats) * num_queue_stats));
+
+ if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
+ &sc->fw_stats_dma, "fw_stats",
+ RTE_CACHE_LINE_SIZE) != 0) {
+ bnx2x_free_fw_stats_mem(sc);
+ return -1;
+ }
+
+ /* set up the shortcuts */
+
+ sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
+ sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
+
+ sc->fw_stats_data =
+ (struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
+ sc->fw_stats_req_size);
+ sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
+ sc->fw_stats_req_size);
+
+ return 0;
+}
+
+/*
+ * Bits map:
+ * 0-7 - Engine0 load counter.
+ * 8-15 - Engine1 load counter.
+ * 16 - Engine0 RESET_IN_PROGRESS bit.
+ * 17 - Engine1 RESET_IN_PROGRESS bit.
+ * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active
+ * function on the engine
+ * 19 - Engine1 ONE_IS_LOADED.
+ * 20 - Chip reset flow bit. When set none-leader must wait for both engines
+ * leader to complete (check for both RESET_IN_PROGRESS bits and not
+ * for just the one belonging to its engine).
+ */
+#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
+#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
+#define BNX2X_PATH0_LOAD_CNT_SHIFT 0
+#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
+#define BNX2X_PATH1_LOAD_CNT_SHIFT 8
+#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
+#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
+#define BNX2X_GLOBAL_RESET_BIT 0x00040000
+
+/* set the GLOBAL_RESET bit, should be run under rtnl lock */
+static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
+static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
+static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
+{
+ return (REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT);
+}
+
+/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
+static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
+ BNX2X_PATH0_RST_IN_PROG_BIT;
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+ /* Clear the bit */
+ val &= ~bit;
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
+static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
+ BNX2X_PATH0_RST_IN_PROG_BIT;
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+ /* Set the bit */
+ val |= bit;
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
+static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
+{
+ uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+ uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
+ BNX2X_PATH0_RST_IN_PROG_BIT;
+
+ /* return false if bit is set */
+ return (val & bit) ? FALSE : TRUE;
+}
+
+/* get the load status for an engine, should be run under rtnl lock */
+static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
+{
+ uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
+ BNX2X_PATH0_LOAD_CNT_MASK;
+ uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+ BNX2X_PATH0_LOAD_CNT_SHIFT;
+ uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+ val = ((val & mask) >> shift);
+
+ return (val != 0);
+}
+
+/* set pf load mark */
+static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ uint32_t val1;
+ uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
+ BNX2X_PATH0_LOAD_CNT_MASK;
+ uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+ BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+
+ PMD_INIT_FUNC_TRACE();
+
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+ /* get the current counter value */
+ val1 = ((val & mask) >> shift);
+
+ /* set bit of this PF */
+ val1 |= (1 << SC_ABS_FUNC(sc));
+
+ /* clear the old value */
+ val &= ~mask;
+
+ /* set the new one */
+ val |= ((val1 << shift) & mask);
+
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+}
+
+/* clear pf load mark */
+static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
+{
+ uint32_t val1, val;
+ uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
+ BNX2X_PATH0_LOAD_CNT_MASK;
+ uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
+ BNX2X_PATH0_LOAD_CNT_SHIFT;
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+ val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
+
+ /* get the current counter value */
+ val1 = (val & mask) >> shift;
+
+ /* clear bit of that PF */
+ val1 &= ~(1 << SC_ABS_FUNC(sc));
+
+ /* clear the old value */
+ val &= ~mask;
+
+ /* set the new one */
+ val |= ((val1 << shift) & mask);
+
+ REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
+ return val1 != 0;
+}
+
+/* send load requrest to mcp and analyze response */
+static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ /* init fw_seq */
+ sc->fw_seq =
+ (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK);
+
+ PMD_DRV_LOG(DEBUG, "initial fw_seq 0x%04x", sc->fw_seq);
+
+#ifdef BNX2X_PULSE
+ /* get the current FW pulse sequence */
+ sc->fw_drv_pulse_wr_seq =
+ (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
+ DRV_PULSE_SEQ_MASK);
+#else
+ /* set ALWAYS_ALIVE bit in shmem */
+ sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+ bnx2x_drv_pulse(sc);
+#endif
+
+ /* load request */
+ (*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
+ DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+
+ /* if the MCP fails to respond we must abort */
+ if (!(*load_code)) {
+ PMD_DRV_LOG(NOTICE, "MCP response failure!");
+ return -1;
+ }
+
+ /* if MCP refused then must abort */
+ if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ PMD_DRV_LOG(NOTICE, "MCP refused load request");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Check whether another PF has already loaded FW to chip. In virtualized
+ * environments a pf from anoth VM may have already initialized the device
+ * including loading FW.
+ */
+static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
+{
+ uint32_t my_fw, loaded_fw;
+
+ /* is another pf loaded on this engine? */
+ if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
+ (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
+ /* build my FW version dword */
+ my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
+ (BNX2X_5710_FW_MINOR_VERSION << 8) +
+ (BNX2X_5710_FW_REVISION_VERSION << 16) +
+ (BNX2X_5710_FW_ENGINEERING_VERSION << 24));
+
+ /* read loaded FW from chip */
+ loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
+ PMD_DRV_LOG(DEBUG, "loaded FW 0x%08x / my FW 0x%08x",
+ loaded_fw, my_fw);
+
+ /* abort nic load if version mismatch */
+ if (my_fw != loaded_fw) {
+ PMD_DRV_LOG(NOTICE,
+ "FW 0x%08x already loaded (mine is 0x%08x)",
+ loaded_fw, my_fw);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+/* mark PMF if applicable */
+static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
+{
+ uint32_t ncsi_oem_data_addr;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
+ /*
+ * Barrier here for ordering between the writing to sc->port.pmf here
+ * and reading it from the periodic task.
+ */
+ sc->port.pmf = 1;
+ mb();
+ } else {
+ sc->port.pmf = 0;
+ }
+
+ PMD_DRV_LOG(DEBUG, "pmf %d", sc->port.pmf);
+
+ if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
+ if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
+ ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
+ if (ncsi_oem_data_addr) {
+ REG_WR(sc,
+ (ncsi_oem_data_addr +
+ offsetof(struct glob_ncsi_oem_data,
+ driver_version)), 0);
+ }
+ }
+ }
+}
+
+static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
+{
+ int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
+ int abs_func;
+ int vn;
+
+ if (BNX2X_NOMCP(sc)) {
+ return; /* what should be the default bvalue in this case */
+ }
+
+ /*
+ * The formula for computing the absolute function number is...
+ * For 2 port configuration (4 functions per port):
+ * abs_func = 2 * vn + SC_PORT + SC_PATH
+ * For 4 port configuration (2 functions per port):
+ * abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
+ */
+ for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+ abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
+ if (abs_func >= E1H_FUNC_MAX) {
+ break;
+ }
+ sc->devinfo.mf_info.mf_config[vn] =
+ MFCFG_RD(sc, func_mf_config[abs_func].config);
+ }
+
+ if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
+ FUNC_MF_CFG_FUNC_DISABLED) {
+ PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
+ sc->flags |= BNX2X_MF_FUNC_DIS;
+ } else {
+ PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
+ sc->flags &= ~BNX2X_MF_FUNC_DIS;
+ }
+}
+
+/* acquire split MCP access lock register */
+static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
+{
+ uint32_t j, val;
+
+ for (j = 0; j < 1000; j++) {
+ val = (1UL << 31);
+ REG_WR(sc, GRCBASE_MCP + 0x9c, val);
+ val = REG_RD(sc, GRCBASE_MCP + 0x9c);
+ if (val & (1L << 31))
+ break;
+
+ DELAY(5000);
+ }
+
+ if (!(val & (1L << 31))) {
+ PMD_DRV_LOG(NOTICE, "Cannot acquire MCP access lock register");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x_softc *sc)
+{
+ REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
+}
+
+static void bnx2x_fan_failure(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ uint32_t ext_phy_config;
+
+ /* mark the failure */
+ ext_phy_config =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
+
+ ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+ SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
+ ext_phy_config);
+
+ /* log the failure */
+ PMD_DRV_LOG(INFO,
+ "Fan Failure has caused the driver to shutdown "
+ "the card to prevent permanent damage. "
+ "Please contact OEM Support for assistance");
+
+ rte_panic("Schedule task to handle fan failure");
+}
+
+/* this function is called upon a link interrupt */
+static void bnx2x_link_attn(struct bnx2x_softc *sc)
+{
+ uint32_t pause_enabled = 0;
+ struct host_port_stats *pstats;
+ int cmng_fns;
+
+ /* Make sure that we are synced with the current statistics */
+ bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+
+ elink_link_update(&sc->link_params, &sc->link_vars);
+
+ if (sc->link_vars.link_up) {
+
+ /* dropless flow control */
+ if (sc->dropless_fc) {
+ pause_enabled = 0;
+
+ if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
+ pause_enabled = 1;
+ }
+
+ REG_WR(sc,
+ (BAR_USTRORM_INTMEM +
+ USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
+ pause_enabled);
+ }
+
+ if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
+ pstats = BNX2X_SP(sc, port_stats);
+ /* reset old mac stats */
+ memset(&(pstats->mac_stx[0]), 0,
+ sizeof(struct mac_stx));
+ }
+
+ if (sc->state == BNX2X_STATE_OPEN) {
+ bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+ }
+ }
+
+ if (sc->link_vars.link_up && sc->link_vars.line_speed) {
+ cmng_fns = bnx2x_get_cmng_fns_mode(sc);
+
+ if (cmng_fns != CMNG_FNS_NONE) {
+ bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
+ storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+ }
+ }
+
+ bnx2x_link_report(sc);
+
+ if (IS_MF(sc)) {
+ bnx2x_link_sync_notify(sc);
+ }
+}
+
+static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
+{
+ int port = SC_PORT(sc);
+ uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+ MISC_REG_AEU_MASK_ATTN_FUNC_0;
+ uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+ NIG_REG_MASK_INTERRUPT_PORT0;
+ uint32_t aeu_mask;
+ uint32_t nig_mask = 0;
+ uint32_t reg_addr;
+ uint32_t igu_acked;
+ uint32_t cnt;
+
+ if (sc->attn_state & asserted) {
+ PMD_DRV_LOG(ERR, "IGU ERROR attn=0x%08x", asserted);
+ }
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+ aeu_mask = REG_RD(sc, aeu_addr);
+
+ aeu_mask &= ~(asserted & 0x3ff);
+
+ REG_WR(sc, aeu_addr, aeu_mask);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+ sc->attn_state |= asserted;
+
+ if (asserted & ATTN_HARD_WIRED_MASK) {
+ if (asserted & ATTN_NIG_FOR_FUNC) {
+
+ /* save nig interrupt mask */
+ nig_mask = REG_RD(sc, nig_int_mask_addr);
+
+ /* If nig_mask is not set, no need to call the update function */
+ if (nig_mask) {
+ REG_WR(sc, nig_int_mask_addr, 0);
+
+ bnx2x_link_attn(sc);
+ }
+
+ /* handle unicore attn? */
+ }
+
+ if (asserted & ATTN_SW_TIMER_4_FUNC) {
+ PMD_DRV_LOG(DEBUG, "ATTN_SW_TIMER_4_FUNC!");
+ }
+
+ if (asserted & GPIO_2_FUNC) {
+ PMD_DRV_LOG(DEBUG, "GPIO_2_FUNC!");
+ }
+
+ if (asserted & GPIO_3_FUNC) {
+ PMD_DRV_LOG(DEBUG, "GPIO_3_FUNC!");
+ }
+
+ if (asserted & GPIO_4_FUNC) {
+ PMD_DRV_LOG(DEBUG, "GPIO_4_FUNC!");
+ }
+
+ if (port == 0) {
+ if (asserted & ATTN_GENERAL_ATTN_1) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_1!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
+ }
+ if (asserted & ATTN_GENERAL_ATTN_2) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_2!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
+ }
+ if (asserted & ATTN_GENERAL_ATTN_3) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_3!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
+ }
+ } else {
+ if (asserted & ATTN_GENERAL_ATTN_4) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_4!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
+ }
+ if (asserted & ATTN_GENERAL_ATTN_5) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_5!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
+ }
+ if (asserted & ATTN_GENERAL_ATTN_6) {
+ PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_6!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
+ }
+ }
+ }
+ /* hardwired */
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ reg_addr =
+ (HC_REG_COMMAND_REG + port * 32 +
+ COMMAND_REG_ATTN_BITS_SET);
+ } else {
+ reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
+ }
+
+ PMD_DRV_LOG(DEBUG, "about to mask 0x%08x at %s addr 0x%08x",
+ asserted,
+ (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
+ reg_addr);
+ REG_WR(sc, reg_addr, asserted);
+
+ /* now set back the mask */
+ if (asserted & ATTN_NIG_FOR_FUNC) {
+ /*
+ * Verify that IGU ack through BAR was written before restoring
+ * NIG mask. This loop should exit after 2-3 iterations max.
+ */
+ if (sc->devinfo.int_block != INT_BLOCK_HC) {
+ cnt = 0;
+
+ do {
+ igu_acked =
+ REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
+ } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
+ && (++cnt < MAX_IGU_ATTN_ACK_TO));
+
+ if (!igu_acked) {
+ PMD_DRV_LOG(ERR,
+ "Failed to verify IGU ack on time");
+ }
+
+ mb();
+ }
+
+ REG_WR(sc, nig_int_mask_addr, nig_mask);
+
+ }
+}
+
+static void
+bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
+ __rte_unused const char *blk)
+{
+ PMD_DRV_LOG(INFO, "%s%s", idx ? ", " : "", blk);
+}
+
+static int
+bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+ uint8_t print)
+{
+ uint32_t cur_bit = 0;
+ int i = 0;
+
+ for (i = 0; sig; i++) {
+ cur_bit = ((uint32_t) 0x1 << i);
+ if (sig & cur_bit) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "BRB");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "PARSER");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "TSDM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "SEARCHER");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "TCM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "TSEMI");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "XPB");
+ break;
+ }
+
+ /* Clear the bit */
+ sig &= ~cur_bit;
+ }
+ }
+
+ return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+ uint8_t * global, uint8_t print)
+{
+ int i = 0;
+ uint32_t cur_bit = 0;
+ for (i = 0; sig; i++) {
+ cur_bit = ((uint32_t) 0x1 << i);
+ if (sig & cur_bit) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "PBF");
+ break;
+ case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "QM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "TM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "XSDM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "XCM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "XSEMI");
+ break;
+ case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "DOORBELLQ");
+ break;
+ case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "NIG");
+ break;
+ case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "VAUX PCI CORE");
+ *global = TRUE;
+ break;
+ case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "DEBUG");
+ break;
+ case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "USDM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "UCM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "USEMI");
+ break;
+ case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "UPB");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "CSDM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "CCM");
+ break;
+ }
+
+ /* Clear the bit */
+ sig &= ~cur_bit;
+ }
+ }
+
+ return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+ uint8_t print)
+{
+ uint32_t cur_bit = 0;
+ int i = 0;
+
+ for (i = 0; sig; i++) {
+ cur_bit = ((uint32_t) 0x1 << i);
+ if (sig & cur_bit) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "CSEMI");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "PXP");
+ break;
+ case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "PXPPCICLOCKCLIENT");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "CFC");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "CDU");
+ break;
+ case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "DMAE");
+ break;
+ case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "IGU");
+ break;
+ case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "MISC");
+ break;
+ }
+
+ /* Clear the bit */
+ sig &= ~cur_bit;
+ }
+ }
+
+ return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+ uint8_t * global, uint8_t print)
+{
+ uint32_t cur_bit = 0;
+ int i = 0;
+
+ for (i = 0; sig; i++) {
+ cur_bit = ((uint32_t) 0x1 << i);
+ if (sig & cur_bit) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "MCP ROM");
+ *global = TRUE;
+ break;
+ case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "MCP UMP RX");
+ *global = TRUE;
+ break;
+ case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "MCP UMP TX");
+ *global = TRUE;
+ break;
+ case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "MCP SCPAD");
+ *global = TRUE;
+ break;
+ }
+
+ /* Clear the bit */
+ sig &= ~cur_bit;
+ }
+ }
+
+ return par_num;
+}
+
+static int
+bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
+ uint8_t print)
+{
+ uint32_t cur_bit = 0;
+ int i = 0;
+
+ for (i = 0; sig; i++) {
+ cur_bit = ((uint32_t) 0x1 << i);
+ if (sig & cur_bit) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "PGLUE_B");
+ break;
+ case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
+ if (print)
+ bnx2x_print_next_block(sc, par_num++,
+ "ATC");
+ break;
+ }
+
+ /* Clear the bit */
+ sig &= ~cur_bit;
+ }
+ }
+
+ return par_num;
+}
+
+static uint8_t
+bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
+ uint32_t * sig)
+{
+ int par_num = 0;
+
+ if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
+ (sig[1] & HW_PRTY_ASSERT_SET_1) ||
+ (sig[2] & HW_PRTY_ASSERT_SET_2) ||
+ (sig[3] & HW_PRTY_ASSERT_SET_3) ||
+ (sig[4] & HW_PRTY_ASSERT_SET_4)) {
+ PMD_DRV_LOG(ERR,
+ "Parity error: HW block parity attention:"
+ "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
+ (uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
+ (uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
+ (uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
+ (uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
+ (uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));
+
+ if (print)
+ PMD_DRV_LOG(INFO, "Parity errors detected in blocks: ");
+
+ par_num =
+ bnx2x_check_blocks_with_parity0(sc, sig[0] &
+ HW_PRTY_ASSERT_SET_0,
+ par_num, print);
+ par_num =
+ bnx2x_check_blocks_with_parity1(sc, sig[1] &
+ HW_PRTY_ASSERT_SET_1,
+ par_num, global, print);
+ par_num =
+ bnx2x_check_blocks_with_parity2(sc, sig[2] &
+ HW_PRTY_ASSERT_SET_2,
+ par_num, print);
+ par_num =
+ bnx2x_check_blocks_with_parity3(sc, sig[3] &
+ HW_PRTY_ASSERT_SET_3,
+ par_num, global, print);
+ par_num =
+ bnx2x_check_blocks_with_parity4(sc, sig[4] &
+ HW_PRTY_ASSERT_SET_4,
+ par_num, print);
+
+ if (print)
+ PMD_DRV_LOG(INFO, "");
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+static uint8_t
+bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
+{
+ struct attn_route attn = { {0} };
+ int port = SC_PORT(sc);
+
+ attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
+ attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
+ attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
+ attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
+
+ if (!CHIP_IS_E1x(sc))
+ attn.sig[4] =
+ REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
+
+ return bnx2x_parity_attn(sc, global, print, attn.sig);
+}
+
+static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
+{
+ uint32_t val;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
+ val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
+ PMD_DRV_LOG(INFO, "ERROR: PGLUE hw attention 0x%08x", val);
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
+ if (val &
+ PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
+ if (val &
+ PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
+ PMD_DRV_LOG(INFO,
+ "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
+ }
+
+ if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
+ val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
+ PMD_DRV_LOG(INFO, "ERROR: ATC hw attention 0x%08x", val);
+ if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
+ if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
+ if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
+ if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
+ if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
+ if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
+ PMD_DRV_LOG(INFO,
+ "ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
+ }
+
+ if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
+ AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
+ PMD_DRV_LOG(INFO,
+ "ERROR: FATAL parity attention set4 0x%08x",
+ (uint32_t) (attn &
+ (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
+ |
+ AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
+ }
+}
+
+static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+
+ REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
+}
+
+static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+
+ REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
+}
+
+/*
+ * called due to MCP event (on pmf):
+ * reread new bandwidth configuration
+ * configure FW
+ * notify others function about the change
+ */
+static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
+{
+ if (sc->link_vars.link_up) {
+ bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
+ bnx2x_link_sync_notify(sc);
+ }
+
+ storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+}
+
+static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
+{
+ bnx2x_config_mf_bw(sc);
+ bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
+}
+
+static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
+{
+ bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
+}
+
+#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
+
+static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
+{
+ struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;
+
+ strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
+ ETH_STAT_INFO_VERSION_LEN);
+
+ sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
+ DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
+ ether_stat->mac_local + MAC_PAD,
+ MAC_PAD, ETH_ALEN);
+
+ ether_stat->mtu_size = sc->mtu;
+
+ ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
+ ether_stat->promiscuous_mode = 0; // (flags & PROMISC) ? 1 : 0;
+
+ ether_stat->txq_size = sc->tx_ring_size;
+ ether_stat->rxq_size = sc->rx_ring_size;
+}
+
+static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
+{
+ enum drv_info_opcode op_code;
+ uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
+
+ /* if drv_info version supported by MFW doesn't match - send NACK */
+ if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
+ bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
+ return;
+ }
+
+ op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
+ DRV_INFO_CONTROL_OP_CODE_SHIFT);
+
+ memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
+
+ switch (op_code) {
+ case ETH_STATS_OPCODE:
+ bnx2x_drv_info_ether_stat(sc);
+ break;
+ case FCOE_STATS_OPCODE:
+ case ISCSI_STATS_OPCODE:
+ default:
+ /* if op code isn't supported - send NACK */
+ bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
+ return;
+ }
+
+ /*
+ * If we got drv_info attn from MFW then these fields are defined in
+ * shmem2 for sure
+ */
+ SHMEM2_WR(sc, drv_info_host_addr_lo,
+ U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
+ SHMEM2_WR(sc, drv_info_host_addr_hi,
+ U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
+
+ bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
+}
+
+static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
+{
+ if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
+/*
+ * This is the only place besides the function initialization
+ * where the sc->flags can change so it is done without any
+ * locks
+ */
+ if (sc->devinfo.
+ mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
+ PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
+ sc->flags |= BNX2X_MF_FUNC_DIS;
+ bnx2x_e1h_disable(sc);
+ } else {
+ PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
+ sc->flags &= ~BNX2X_MF_FUNC_DIS;
+ bnx2x_e1h_enable(sc);
+ }
+ dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
+ }
+
+ if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
+ bnx2x_config_mf_bw(sc);
+ dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
+ }
+
+ /* Report results to MCP */
+ if (dcc_event)
+ bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
+ else
+ bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
+}
+
+static void bnx2x_pmf_update(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ uint32_t val;
+
+ sc->port.pmf = 1;
+
+ /*
+ * We need the mb() to ensure the ordering between the writing to
+ * sc->port.pmf here and reading it from the bnx2x_periodic_task().
+ */
+ mb();
+
+ /* enable nig attention */
+ val = (0xff0f | (1 << (SC_VN(sc) + 4)));
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
+ REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
+ } else if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
+ REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
+ }
+
+ bnx2x_stats_handle(sc, STATS_EVENT_PMF);
+}
+
+static int bnx2x_mc_assert(struct bnx2x_softc *sc)
+{
+ char last_idx;
+ int i, rc = 0;
+ __rte_unused uint32_t row0, row1, row2, row3;
+
+ /* XSTORM */
+ last_idx =
+ REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
+ if (last_idx)
+ PMD_DRV_LOG(ERR, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+
+ /* print the asserts */
+ for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+ row0 =
+ REG_RD(sc,
+ BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
+ row1 =
+ REG_RD(sc,
+ BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+ 4);
+ row2 =
+ REG_RD(sc,
+ BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+ 8);
+ row3 =
+ REG_RD(sc,
+ BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
+ 12);
+
+ if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+ PMD_DRV_LOG(ERR,
+ "XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+ i, row3, row2, row1, row0);
+ rc++;
+ } else {
+ break;
+ }
+ }
+
+ /* TSTORM */
+ last_idx =
+ REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
+ if (last_idx) {
+ PMD_DRV_LOG(ERR, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+ }
+
+ /* print the asserts */
+ for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+ row0 =
+ REG_RD(sc,
+ BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
+ row1 =
+ REG_RD(sc,
+ BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+ 4);
+ row2 =
+ REG_RD(sc,
+ BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+ 8);
+ row3 =
+ REG_RD(sc,
+ BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
+ 12);
+
+ if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+ PMD_DRV_LOG(ERR,
+ "TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+ i, row3, row2, row1, row0);
+ rc++;
+ } else {
+ break;
+ }
+ }
+
+ /* CSTORM */
+ last_idx =
+ REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
+ if (last_idx) {
+ PMD_DRV_LOG(ERR, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+ }
+
+ /* print the asserts */
+ for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+ row0 =
+ REG_RD(sc,
+ BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
+ row1 =
+ REG_RD(sc,
+ BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+ 4);
+ row2 =
+ REG_RD(sc,
+ BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+ 8);
+ row3 =
+ REG_RD(sc,
+ BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
+ 12);
+
+ if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+ PMD_DRV_LOG(ERR,
+ "CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+ i, row3, row2, row1, row0);
+ rc++;
+ } else {
+ break;
+ }
+ }
+
+ /* USTORM */
+ last_idx =
+ REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
+ if (last_idx) {
+ PMD_DRV_LOG(ERR, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
+ }
+
+ /* print the asserts */
+ for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
+
+ row0 =
+ REG_RD(sc,
+ BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
+ row1 =
+ REG_RD(sc,
+ BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+ 4);
+ row2 =
+ REG_RD(sc,
+ BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+ 8);
+ row3 =
+ REG_RD(sc,
+ BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
+ 12);
+
+ if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
+ PMD_DRV_LOG(ERR,
+ "USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
+ i, row3, row2, row1, row0);
+ rc++;
+ } else {
+ break;
+ }
+ }
+
+ return rc;
+}
+
+static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
+{
+ int func = SC_FUNC(sc);
+ uint32_t val;
+
+ if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+ if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {
+
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+ bnx2x_read_mf_cfg(sc);
+ sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
+ MFCFG_RD(sc,
+ func_mf_config[SC_ABS_FUNC(sc)].config);
+ val =
+ SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
+
+ if (val & DRV_STATUS_DCC_EVENT_MASK)
+ bnx2x_dcc_event(sc,
+ (val &
+ DRV_STATUS_DCC_EVENT_MASK));
+
+ if (val & DRV_STATUS_SET_MF_BW)
+ bnx2x_set_mf_bw(sc);
+
+ if (val & DRV_STATUS_DRV_INFO_REQ)
+ bnx2x_handle_drv_info_req(sc);
+
+ if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
+ bnx2x_pmf_update(sc);
+
+ if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
+ bnx2x_handle_eee_event(sc);
+
+ if (sc->link_vars.periodic_flags &
+ ELINK_PERIODIC_FLAGS_LINK_EVENT) {
+ /* sync with link */
+ sc->link_vars.periodic_flags &=
+ ~ELINK_PERIODIC_FLAGS_LINK_EVENT;
+ if (IS_MF(sc)) {
+ bnx2x_link_sync_notify(sc);
+ }
+ bnx2x_link_report(sc);
+ }
+
+ /*
+ * Always call it here: bnx2x_link_report() will
+ * prevent the link indication duplication.
+ */
+ bnx2x_link_status_update(sc);
+
+ } else if (attn & BNX2X_MC_ASSERT_BITS) {
+
+ PMD_DRV_LOG(ERR, "MC assert!");
+ bnx2x_mc_assert(sc);
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+ rte_panic("MC assert!");
+
+ } else if (attn & BNX2X_MCP_ASSERT) {
+
+ PMD_DRV_LOG(ERR, "MCP assert!");
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Unknown HW assert! (attn 0x%08x)", attn);
+ }
+ }
+
+ if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+ PMD_DRV_LOG(ERR, "LATCHED attention 0x%08x (masked)", attn);
+ if (attn & BNX2X_GRC_TIMEOUT) {
+ val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
+ PMD_DRV_LOG(ERR, "GRC time-out 0x%08x", val);
+ }
+ if (attn & BNX2X_GRC_RSV) {
+ val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
+ PMD_DRV_LOG(ERR, "GRC reserved 0x%08x", val);
+ }
+ REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+ }
+}
+
+static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
+{
+ int port = SC_PORT(sc);
+ int reg_offset;
+ uint32_t val0, mask0, val1, mask1;
+ uint32_t val;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+ val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
+ PMD_DRV_LOG(ERR, "CFC hw attention 0x%08x", val);
+/* CFC error attention */
+ if (val & 0x2) {
+ PMD_DRV_LOG(ERR, "FATAL error from CFC");
+ }
+ }
+
+ if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+ val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
+ PMD_DRV_LOG(ERR, "PXP hw attention-0 0x%08x", val);
+/* RQ_USDMDP_FIFO_OVERFLOW */
+ if (val & 0x18000) {
+ PMD_DRV_LOG(ERR, "FATAL error from PXP");
+ }
+
+ if (!CHIP_IS_E1x(sc)) {
+ val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
+ PMD_DRV_LOG(ERR, "PXP hw attention-1 0x%08x", val);
+ }
+ }
+#define PXP2_EOP_ERROR_BIT PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
+#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
+
+ if (attn & AEU_PXP2_HW_INT_BIT) {
+/* CQ47854 workaround do not panic on
+ * PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
+ */
+ if (!CHIP_IS_E1x(sc)) {
+ mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
+ val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
+ mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
+ val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
+ /*
+ * If the olny PXP2_EOP_ERROR_BIT is set in
+ * STS0 and STS1 - clear it
+ *
+ * probably we lose additional attentions between
+ * STS0 and STS_CLR0, in this case user will not
+ * be notified about them
+ */
+ if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
+ !(val1 & mask1))
+ val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
+
+ /* print the register, since no one can restore it */
+ PMD_DRV_LOG(ERR,
+ "PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);
+
+ /*
+ * if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
+ * then notify
+ */
+ if (val0 & PXP2_EOP_ERROR_BIT) {
+ PMD_DRV_LOG(ERR, "PXP2_WR_PGLUE_EOP_ERROR");
+
+ /*
+ * if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
+ * set then clear attention from PXP2 block without panic
+ */
+ if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
+ ((val1 & mask1) == 0))
+ attn &= ~AEU_PXP2_HW_INT_BIT;
+ }
+ }
+ }
+
+ if (attn & HW_INTERRUT_ASSERT_SET_2) {
+ reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
+
+ val = REG_RD(sc, reg_offset);
+ val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
+ REG_WR(sc, reg_offset, val);
+
+ PMD_DRV_LOG(ERR,
+ "FATAL HW block attention set2 0x%x",
+ (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
+ rte_panic("HW block attention set2");
+ }
+}
+
+static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
+{
+ int port = SC_PORT(sc);
+ int reg_offset;
+ uint32_t val;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
+ val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
+ PMD_DRV_LOG(ERR, "DB hw attention 0x%08x", val);
+/* DORQ discard attention */
+ if (val & 0x2) {
+ PMD_DRV_LOG(ERR, "FATAL error from DORQ");
+ }
+ }
+
+ if (attn & HW_INTERRUT_ASSERT_SET_1) {
+ reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
+
+ val = REG_RD(sc, reg_offset);
+ val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
+ REG_WR(sc, reg_offset, val);
+
+ PMD_DRV_LOG(ERR,
+ "FATAL HW block attention set1 0x%08x",
+ (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
+ rte_panic("HW block attention set1");
+ }
+}
+
+static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
+{
+ int port = SC_PORT(sc);
+ int reg_offset;
+ uint32_t val;
+
+ reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+ val = REG_RD(sc, reg_offset);
+ val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(sc, reg_offset, val);
+
+ PMD_DRV_LOG(WARN, "SPIO5 hw attention");
+
+/* Fan failure attention */
+ elink_hw_reset_phy(&sc->link_params);
+ bnx2x_fan_failure(sc);
+ }
+
+ if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
+ elink_handle_module_detect_int(&sc->link_params);
+ }
+
+ if (attn & HW_INTERRUT_ASSERT_SET_0) {
+ val = REG_RD(sc, reg_offset);
+ val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
+ REG_WR(sc, reg_offset, val);
+
+ rte_panic("FATAL HW block attention set0 0x%lx",
+ (attn & HW_INTERRUT_ASSERT_SET_0));
+ }
+}
+
+static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
+{
+ struct attn_route attn;
+ struct attn_route *group_mask;
+ int port = SC_PORT(sc);
+ int index;
+ uint32_t reg_addr;
+ uint32_t val;
+ uint32_t aeu_mask;
+ uint8_t global = FALSE;
+
+ /*
+ * Need to take HW lock because MCP or other port might also
+ * try to handle this event.
+ */
+ bnx2x_acquire_alr(sc);
+
+ if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
+ sc->recovery_state = BNX2X_RECOVERY_INIT;
+
+/* disable HW interrupts */
+ bnx2x_int_disable(sc);
+ bnx2x_release_alr(sc);
+ return;
+ }
+
+ attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
+ attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
+ attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
+ attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
+ if (!CHIP_IS_E1x(sc)) {
+ attn.sig[4] =
+ REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
+ } else {
+ attn.sig[4] = 0;
+ }
+
+ for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+ if (deasserted & (1 << index)) {
+ group_mask = &sc->attn_group[index];
+
+ bnx2x_attn_int_deasserted4(sc,
+ attn.
+ sig[4] & group_mask->sig[4]);
+ bnx2x_attn_int_deasserted3(sc,
+ attn.
+ sig[3] & group_mask->sig[3]);
+ bnx2x_attn_int_deasserted1(sc,
+ attn.
+ sig[1] & group_mask->sig[1]);
+ bnx2x_attn_int_deasserted2(sc,
+ attn.
+ sig[2] & group_mask->sig[2]);
+ bnx2x_attn_int_deasserted0(sc,
+ attn.
+ sig[0] & group_mask->sig[0]);
+ }
+ }
+
+ bnx2x_release_alr(sc);
+
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ reg_addr = (HC_REG_COMMAND_REG + port * 32 +
+ COMMAND_REG_ATTN_BITS_CLR);
+ } else {
+ reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
+ }
+
+ val = ~deasserted;
+ PMD_DRV_LOG(DEBUG,
+ "about to mask 0x%08x at %s addr 0x%08x", val,
+ (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
+ reg_addr);
+ REG_WR(sc, reg_addr, val);
+
+ if (~sc->attn_state & deasserted) {
+ PMD_DRV_LOG(ERR, "IGU error");
+ }
+
+ reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+ MISC_REG_AEU_MASK_ATTN_FUNC_0;
+
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+ aeu_mask = REG_RD(sc, reg_addr);
+
+ aeu_mask |= (deasserted & 0x3ff);
+
+ REG_WR(sc, reg_addr, aeu_mask);
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+
+ sc->attn_state &= ~deasserted;
+}
+
+static void bnx2x_attn_int(struct bnx2x_softc *sc)
+{
+ /* read local copy of bits */
+ uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
+ uint32_t attn_ack =
+ le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
+ uint32_t attn_state = sc->attn_state;
+
+ /* look for changed bits */
+ uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
+ uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
+
+ PMD_DRV_LOG(DEBUG,
+ "attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
+ attn_bits, attn_ack, asserted, deasserted);
+
+ if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
+ PMD_DRV_LOG(ERR, "BAD attention state");
+ }
+
+ /* handle bits that were raised */
+ if (asserted) {
+ bnx2x_attn_int_asserted(sc, asserted);
+ }
+
+ if (deasserted) {
+ bnx2x_attn_int_deasserted(sc, deasserted);
+ }
+}
+
+static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
+{
+ struct host_sp_status_block *def_sb = sc->def_sb;
+ uint16_t rc = 0;
+
+ mb(); /* status block is written to by the chip */
+
+ if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
+ sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
+ rc |= BNX2X_DEF_SB_ATT_IDX;
+ }
+
+ if (sc->def_idx != def_sb->sp_sb.running_index) {
+ sc->def_idx = def_sb->sp_sb.running_index;
+ rc |= BNX2X_DEF_SB_IDX;
+ }
+
+ mb();
+
+ return rc;
+}
+
+static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
+ uint32_t cid)
+{
+ return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
+}
+
+static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
+{
+ struct ecore_mcast_ramrod_params rparam;
+ int rc;
+
+ memset(&rparam, 0, sizeof(rparam));
+
+ rparam.mcast_obj = &sc->mcast_obj;
+
+ /* clear pending state for the last command */
+ sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
+
+ /* if there are pending mcast commands - send them */
+ if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
+ rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
+ if (rc < 0) {
+ PMD_DRV_LOG(INFO,
+ "Failed to send pending mcast commands (%d)",
+ rc);
+ }
+ }
+}
+
+static void
+bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
+{
+ unsigned long ramrod_flags = 0;
+ int rc = 0;
+ uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
+ struct ecore_vlan_mac_obj *vlan_mac_obj;
+
+ /* always push next commands out, don't wait here */
+ bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
+
+ switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
+ case ECORE_FILTER_MAC_PENDING:
+ PMD_DRV_LOG(DEBUG, "Got SETUP_MAC completions");
+ vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
+ break;
+
+ case ECORE_FILTER_MCAST_PENDING:
+ PMD_DRV_LOG(DEBUG, "Got SETUP_MCAST completions");
+ bnx2x_handle_mcast_eqe(sc);
+ return;
+
+ default:
+ PMD_DRV_LOG(NOTICE, "Unsupported classification command: %d",
+ elem->message.data.eth_event.echo);
+ return;
+ }
+
+ rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
+
+ if (rc < 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to schedule new commands (%d)", rc);
+ } else if (rc > 0) {
+ PMD_DRV_LOG(DEBUG, "Scheduled next pending commands...");
+ }
+}
+
+static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
+{
+ bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+
+ /* send rx_mode command again if was requested */
+ if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
+ bnx2x_set_storm_rx_mode(sc);
+ }
+}
+
+static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
+{
+ storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
+ wmb(); /* keep prod updates ordered */
+}
+
+static void bnx2x_eq_int(struct bnx2x_softc *sc)
+{
+ uint16_t hw_cons, sw_cons, sw_prod;
+ union event_ring_elem *elem;
+ uint8_t echo;
+ uint32_t cid;
+ uint8_t opcode;
+ int spqe_cnt = 0;
+ struct ecore_queue_sp_obj *q_obj;
+ struct ecore_func_sp_obj *f_obj = &sc->func_obj;
+ struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
+
+ hw_cons = le16toh(*sc->eq_cons_sb);
+
+ /*
+ * The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
+ * when we get to the next-page we need to adjust so the loop
+ * condition below will be met. The next element is the size of a
+ * regular element and hence incrementing by 1
+ */
+ if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
+ hw_cons++;
+ }
+
+ /*
+ * This function may never run in parallel with itself for a
+ * specific sc and no need for a read memory barrier here.
+ */
+ sw_cons = sc->eq_cons;
+ sw_prod = sc->eq_prod;
+
+ for (;
+ sw_cons != hw_cons;
+ sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
+
+ elem = &sc->eq[EQ_DESC(sw_cons)];
+
+/* elem CID originates from FW, actually LE */
+ cid = SW_CID(elem->message.data.cfc_del_event.cid);
+ opcode = elem->message.opcode;
+
+/* handle eq element */
+ switch (opcode) {
+ case EVENT_RING_OPCODE_STAT_QUERY:
+ PMD_DRV_LOG(DEBUG, "got statistics completion event %d",
+ sc->stats_comp++);
+ /* nothing to do with stats comp */
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_CFC_DEL:
+ /* handle according to cid range */
+ /* we may want to verify here that the sc state is HALTING */
+ PMD_DRV_LOG(DEBUG, "got delete ramrod for MULTI[%d]",
+ cid);
+ q_obj = bnx2x_cid_to_q_obj(sc, cid);
+ if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
+ break;
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_STOP_TRAFFIC:
+ PMD_DRV_LOG(DEBUG, "got STOP TRAFFIC");
+ if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
+ break;
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_START_TRAFFIC:
+ PMD_DRV_LOG(DEBUG, "got START TRAFFIC");
+ if (f_obj->complete_cmd
+ (sc, f_obj, ECORE_F_CMD_TX_START)) {
+ break;
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_FUNCTION_UPDATE:
+ echo = elem->message.data.function_update_event.echo;
+ if (echo == SWITCH_UPDATE) {
+ PMD_DRV_LOG(DEBUG,
+ "got FUNC_SWITCH_UPDATE ramrod");
+ if (f_obj->complete_cmd(sc, f_obj,
+ ECORE_F_CMD_SWITCH_UPDATE))
+ {
+ break;
+ }
+ } else {
+ PMD_DRV_LOG(DEBUG,
+ "AFEX: ramrod completed FUNCTION_UPDATE");
+ f_obj->complete_cmd(sc, f_obj,
+ ECORE_F_CMD_AFEX_UPDATE);
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_FORWARD_SETUP:
+ q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
+ if (q_obj->complete_cmd(sc, q_obj,
+ ECORE_Q_CMD_SETUP_TX_ONLY)) {
+ break;
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_FUNCTION_START:
+ PMD_DRV_LOG(DEBUG, "got FUNC_START ramrod");
+ if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
+ break;
+ }
+ goto next_spqe;
+
+ case EVENT_RING_OPCODE_FUNCTION_STOP:
+ PMD_DRV_LOG(DEBUG, "got FUNC_STOP ramrod");
+ if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
+ break;
+ }
+ goto next_spqe;
+ }
+
+ switch (opcode | sc->state) {
+ case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
+ case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
+ cid =
+ elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
+ PMD_DRV_LOG(DEBUG, "got RSS_UPDATE ramrod. CID %d",
+ cid);
+ rss_raw->clear_pending(rss_raw);
+ break;
+
+ case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
+ case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
+ case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
+ case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
+ case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
+ case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+ PMD_DRV_LOG(DEBUG,
+ "got (un)set mac ramrod");
+ bnx2x_handle_classification_eqe(sc, elem);
+ break;
+
+ case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
+ case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
+ case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+ PMD_DRV_LOG(DEBUG,
+ "got mcast ramrod");
+ bnx2x_handle_mcast_eqe(sc);
+ break;
+
+ case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
+ case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
+ case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
+ PMD_DRV_LOG(DEBUG,
+ "got rx_mode ramrod");
+ bnx2x_handle_rx_mode_eqe(sc);
+ break;
+
+ default:
+ /* unknown event log error and continue */
+ PMD_DRV_LOG(INFO, "Unknown EQ event %d, sc->state 0x%x",
+ elem->message.opcode, sc->state);
+ }
+
+next_spqe:
+ spqe_cnt++;
+ } /* for */
+
+ mb();
+ atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
+
+ sc->eq_cons = sw_cons;
+ sc->eq_prod = sw_prod;
+
+ /* make sure that above mem writes were issued towards the memory */
+ wmb();
+
+ /* update producer */
+ bnx2x_update_eq_prod(sc, sc->eq_prod);
+}
+
+static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
+{
+ uint16_t status;
+ int rc = 0;
+
+ /* what work needs to be performed? */
+ status = bnx2x_update_dsb_idx(sc);
+
+ /* HW attentions */
+ if (status & BNX2X_DEF_SB_ATT_IDX) {
+ PMD_DRV_LOG(DEBUG, "---> ATTN INTR <---");
+ bnx2x_attn_int(sc);
+ status &= ~BNX2X_DEF_SB_ATT_IDX;
+ rc = 1;
+ }
+
+ /* SP events: STAT_QUERY and others */
+ if (status & BNX2X_DEF_SB_IDX) {
+/* handle EQ completions */
+ PMD_DRV_LOG(DEBUG, "---> EQ INTR <---");
+ bnx2x_eq_int(sc);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
+ le16toh(sc->def_idx), IGU_INT_NOP, 1);
+ status &= ~BNX2X_DEF_SB_IDX;
+ }
+
+ /* if status is non zero then something went wrong */
+ if (unlikely(status)) {
+ PMD_DRV_LOG(INFO,
+ "Got an unknown SP interrupt! (0x%04x)", status);
+ }
+
+ /* ack status block only if something was actually handled */
+ bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
+ le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
+
+ return rc;
+}
+
+static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp)
+{
+ struct bnx2x_softc *sc = fp->sc;
+ uint8_t more_rx = FALSE;
+
+ /* update the fastpath index */
+ bnx2x_update_fp_sb_idx(fp);
+
+ if (scan_fp) {
+ if (bnx2x_has_rx_work(fp)) {
+ more_rx = bnx2x_rxeof(sc, fp);
+ }
+
+ if (more_rx) {
+ /* still more work to do */
+ bnx2x_handle_fp_tq(fp, scan_fp);
+ return;
+ }
+ }
+
+ bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
+ le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
+}
+
+/*
+ * Legacy interrupt entry point.
+ *
+ * Verifies that the controller generated the interrupt and
+ * then calls a separate routine to handle the various
+ * interrupt causes: link, RX, and TX.
+ */
+int bnx2x_intr_legacy(struct bnx2x_softc *sc, int scan_fp)
+{
+ struct bnx2x_fastpath *fp;
+ uint32_t status, mask;
+ int i, rc = 0;
+
+ /*
+ * 0 for ustorm, 1 for cstorm
+ * the bits returned from ack_int() are 0-15
+ * bit 0 = attention status block
+ * bit 1 = fast path status block
+ * a mask of 0x2 or more = tx/rx event
+ * a mask of 1 = slow path event
+ */
+
+ status = bnx2x_ack_int(sc);
+
+ /* the interrupt is not for us */
+ if (unlikely(status == 0)) {
+ return 0;
+ }
+
+ PMD_DRV_LOG(DEBUG, "Interrupt status 0x%04x", status);
+ //bnx2x_dump_status_block(sc);
+
+ FOR_EACH_ETH_QUEUE(sc, i) {
+ fp = &sc->fp[i];
+ mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
+ if (status & mask) {
+ bnx2x_handle_fp_tq(fp, scan_fp);
+ status &= ~mask;
+ }
+ }
+
+ if (unlikely(status & 0x1)) {
+ rc = bnx2x_handle_sp_tq(sc);
+ status &= ~0x1;
+ }
+
+ if (unlikely(status)) {
+ PMD_DRV_LOG(WARN,
+ "Unexpected fastpath status (0x%08x)!", status);
+ }
+
+ return rc;
+}
+
+static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
+static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
+static void bnx2x_reset_common(struct bnx2x_softc *sc);
+static void bnx2x_reset_port(struct bnx2x_softc *sc);
+static void bnx2x_reset_func(struct bnx2x_softc *sc);
+static int bnx2x_init_firmware(struct bnx2x_softc *sc);
+static void bnx2x_release_firmware(struct bnx2x_softc *sc);
+
+static struct
+ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
+ .init_hw_cmn_chip = bnx2x_init_hw_common_chip,
+ .init_hw_cmn = bnx2x_init_hw_common,
+ .init_hw_port = bnx2x_init_hw_port,
+ .init_hw_func = bnx2x_init_hw_func,
+
+ .reset_hw_cmn = bnx2x_reset_common,
+ .reset_hw_port = bnx2x_reset_port,
+ .reset_hw_func = bnx2x_reset_func,
+
+ .init_fw = bnx2x_init_firmware,
+ .release_fw = bnx2x_release_firmware,
+};
+
+static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
+{
+ sc->dmae_ready = 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ecore_init_func_obj(sc,
+ &sc->func_obj,
+ BNX2X_SP(sc, func_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING(sc, func_rdata)), BNX2X_SP(sc, func_afex_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING(sc, func_afex_rdata)), &bnx2x_func_sp_drv);
+}
+
+static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
+{
+ struct ecore_func_state_params func_params = { NULL };
+ int rc;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* prepare the parameters for function state transitions */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+ func_params.f_obj = &sc->func_obj;
+ func_params.cmd = ECORE_F_CMD_HW_INIT;
+
+ func_params.params.hw_init.load_phase = load_code;
+
+ /*
+ * Via a plethora of function pointers, we will eventually reach
+ * bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
+ */
+ rc = ecore_func_state_change(sc, &func_params);
+
+ return rc;
+}
+
+static void
+bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
+{
+ uint32_t i;
+
+ if (!(len % 4) && !(addr % 4)) {
+ for (i = 0; i < len; i += 4) {
+ REG_WR(sc, (addr + i), fill);
+ }
+ } else {
+ for (i = 0; i < len; i++) {
+ REG_WR8(sc, (addr + i), fill);
+ }
+ }
+}
+
+/* writes FP SP data to FW - data_size in dwords */
+static void
+bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
+ uint32_t data_size)
+{
+ uint32_t index;
+
+ for (index = 0; index < data_size; index++) {
+ REG_WR(sc,
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
+ (sizeof(uint32_t) * index)), *(sb_data_p + index));
+ }
+}
+
+static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
+{
+ struct hc_status_block_data_e2 sb_data_e2;
+ struct hc_status_block_data_e1x sb_data_e1x;
+ uint32_t *sb_data_p;
+ uint32_t data_size = 0;
+
+ if (!CHIP_IS_E1x(sc)) {
+ memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+ sb_data_e2.common.state = SB_DISABLED;
+ sb_data_e2.common.p_func.vf_valid = FALSE;
+ sb_data_p = (uint32_t *) & sb_data_e2;
+ data_size = (sizeof(struct hc_status_block_data_e2) /
+ sizeof(uint32_t));
+ } else {
+ memset(&sb_data_e1x, 0,
+ sizeof(struct hc_status_block_data_e1x));
+ sb_data_e1x.common.state = SB_DISABLED;
+ sb_data_e1x.common.p_func.vf_valid = FALSE;
+ sb_data_p = (uint32_t *) & sb_data_e1x;
+ data_size = (sizeof(struct hc_status_block_data_e1x) /
+ sizeof(uint32_t));
+ }
+
+ bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
+
+ bnx2x_fill(sc,
+ (BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
+ CSTORM_STATUS_BLOCK_SIZE);
+ bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
+ 0, CSTORM_SYNC_BLOCK_SIZE);
+}
+
+static void
+bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
+ struct hc_sp_status_block_data *sp_sb_data)
+{
+ uint32_t i;
+
+ for (i = 0;
+ i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
+ i++) {
+ REG_WR(sc,
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
+ (i * sizeof(uint32_t))),
+ *((uint32_t *) sp_sb_data + i));
+ }
+}
+
+static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
+{
+ struct hc_sp_status_block_data sp_sb_data;
+
+ memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+ sp_sb_data.state = SB_DISABLED;
+ sp_sb_data.p_func.vf_valid = FALSE;
+
+ bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
+
+ bnx2x_fill(sc,
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
+ 0, CSTORM_SP_STATUS_BLOCK_SIZE);
+ bnx2x_fill(sc,
+ (BAR_CSTRORM_INTMEM +
+ CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
+ 0, CSTORM_SP_SYNC_BLOCK_SIZE);
+}
+
+static void
+bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
+ int igu_seg_id)
+{
+ hc_sm->igu_sb_id = igu_sb_id;
+ hc_sm->igu_seg_id = igu_seg_id;
+ hc_sm->timer_value = 0xFF;
+ hc_sm->time_to_expire = 0xFFFFFFFF;
+}
+
+static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
+{
+ /* zero out state machine indices */
+
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* map indices */
+
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
+ (SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
+ (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
+ (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
+ (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
+ (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
+}
+
+static void
+bnx2x_init_sb(struct bnx2x_softc *sc, phys_addr_t busaddr, int vfid,
+ uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
+{
+ struct hc_status_block_data_e2 sb_data_e2;
+ struct hc_status_block_data_e1x sb_data_e1x;
+ struct hc_status_block_sm *hc_sm_p;
+ uint32_t *sb_data_p;
+ int igu_seg_id;
+ int data_size;
+
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ igu_seg_id = HC_SEG_ACCESS_NORM;
+ } else {
+ igu_seg_id = IGU_SEG_ACCESS_NORM;
+ }
+
+ bnx2x_zero_fp_sb(sc, fw_sb_id);
+
+ if (!CHIP_IS_E1x(sc)) {
+ memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
+ sb_data_e2.common.state = SB_ENABLED;
+ sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
+ sb_data_e2.common.p_func.vf_id = vfid;
+ sb_data_e2.common.p_func.vf_valid = vf_valid;
+ sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
+ sb_data_e2.common.same_igu_sb_1b = TRUE;
+ sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
+ sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
+ hc_sm_p = sb_data_e2.common.state_machine;
+ sb_data_p = (uint32_t *) & sb_data_e2;
+ data_size = (sizeof(struct hc_status_block_data_e2) /
+ sizeof(uint32_t));
+ bnx2x_map_sb_state_machines(sb_data_e2.index_data);
+ } else {
+ memset(&sb_data_e1x, 0,
+ sizeof(struct hc_status_block_data_e1x));
+ sb_data_e1x.common.state = SB_ENABLED;
+ sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
+ sb_data_e1x.common.p_func.vf_id = 0xff;
+ sb_data_e1x.common.p_func.vf_valid = FALSE;
+ sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
+ sb_data_e1x.common.same_igu_sb_1b = TRUE;
+ sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
+ sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
+ hc_sm_p = sb_data_e1x.common.state_machine;
+ sb_data_p = (uint32_t *) & sb_data_e1x;
+ data_size = (sizeof(struct hc_status_block_data_e1x) /
+ sizeof(uint32_t));
+ bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
+ }
+
+ bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
+ bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
+
+ /* write indices to HW - PCI guarantees endianity of regpairs */
+ bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
+}
+
+static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
+{
+ if (CHIP_IS_E1x(fp->sc)) {
+ return (fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H);
+ } else {
+ return (fp->cl_id);
+ }
+}
+
+static uint32_t
+bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
+{
+ uint32_t offset = BAR_USTRORM_INTMEM;
+
+ if (IS_VF(sc)) {
+ return (PXP_VF_ADDR_USDM_QUEUES_START +
+ (sc->acquire_resp.resc.hw_qid[fp->index] *
+ sizeof(struct ustorm_queue_zone_data)));
+ } else if (!CHIP_IS_E1x(sc)) {
+ offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
+ } else {
+ offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
+ }
+
+ return offset;
+}
+
+static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
+{
+ struct bnx2x_fastpath *fp = &sc->fp[idx];
+ uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
+ unsigned long q_type = 0;
+ int cos;
+
+ fp->sc = sc;
+ fp->index = idx;
+
+ fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
+ fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
+
+ if (CHIP_IS_E1x(sc))
+ fp->cl_id = SC_L_ID(sc) + idx;
+ else
+/* want client ID same as IGU SB ID for non-E1 */
+ fp->cl_id = fp->igu_sb_id;
+ fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
+
+ /* setup sb indices */
+ if (!CHIP_IS_E1x(sc)) {
+ fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
+ fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
+ } else {
+ fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
+ fp->sb_running_index =
+ fp->status_block.e1x_sb->sb.running_index;
+ }
+
+ /* init shortcut */
+ fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);
+
+ fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
+
+ for (cos = 0; cos < sc->max_cos; cos++) {
+ cids[cos] = idx;
+ }
+ fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
+
+ /* nothing more for a VF to do */
+ if (IS_VF(sc)) {
+ return;
+ }
+
+ bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
+ fp->fw_sb_id, fp->igu_sb_id);
+
+ bnx2x_update_fp_sb_idx(fp);
+
+ /* Configure Queue State object */
+ bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
+ bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
+
+ ecore_init_queue_obj(sc,
+ &sc->sp_objs[idx].q_obj,
+ fp->cl_id,
+ cids,
+ sc->max_cos,
+ SC_FUNC(sc),
+ BNX2X_SP(sc, q_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING
+ (sc, q_rdata)),
+ q_type);
+
+ /* configure classification DBs */
+ ecore_init_mac_obj(sc,
+ &sc->sp_objs[idx].mac_obj,
+ fp->cl_id,
+ idx,
+ SC_FUNC(sc),
+ BNX2X_SP(sc, mac_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING
+ (sc,
+ mac_rdata)),
+ ECORE_FILTER_MAC_PENDING, &sc->sp_state,
+ ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
+}
+
+static void
+bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ uint16_t rx_bd_prod, uint16_t rx_cq_prod)
+{
+ union ustorm_eth_rx_producers rx_prods;
+ uint32_t i;
+
+ /* update producers */
+ rx_prods.prod.bd_prod = rx_bd_prod;
+ rx_prods.prod.cqe_prod = rx_cq_prod;
+ rx_prods.prod.reserved = 0;
+
+ /*
+ * Make sure that the BD and SGE data is updated before updating the
+ * producers since FW might read the BD/SGE right after the producer
+ * is updated.
+ * This is only applicable for weak-ordered memory model archs such
+ * as IA-64. The following barrier is also mandatory since FW will
+ * assumes BDs must have buffers.
+ */
+ wmb();
+
+ for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
+ REG_WR(sc,
+ (fp->ustorm_rx_prods_offset + (i * 4)),
+ rx_prods.raw_data[i]);
+ }
+
+ wmb(); /* keep prod updates ordered */
+}
+
+static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
+{
+ struct bnx2x_fastpath *fp;
+ int i;
+ struct bnx2x_rx_queue *rxq;
+
+ for (i = 0; i < sc->num_queues; i++) {
+ fp = &sc->fp[i];
+ rxq = sc->rx_queues[fp->index];
+ if (!rxq) {
+ PMD_RX_LOG(ERR, "RX queue is NULL");
+ return;
+ }
+
+/*
+ * Activate the BD ring...
+ * Warning, this will generate an interrupt (to the TSTORM)
+ * so this can only be done after the chip is initialized
+ */
+ bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);
+
+ if (i != 0) {
+ continue;
+ }
+ }
+}
+
+static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
+{
+ struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+ fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
+ fp->tx_db.data.zero_fill1 = 0;
+ fp->tx_db.data.prod = 0;
+
+ if (!txq) {
+ PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+ return;
+ }
+
+ txq->tx_pkt_tail = 0;
+ txq->tx_pkt_head = 0;
+ txq->tx_bd_tail = 0;
+ txq->tx_bd_head = 0;
+}
+
+static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
+{
+ int i;
+
+ for (i = 0; i < sc->num_queues; i++) {
+ bnx2x_init_tx_ring_one(&sc->fp[i]);
+ }
+}
+
+static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
+{
+ struct host_sp_status_block *def_sb = sc->def_sb;
+ phys_addr_t mapping = sc->def_sb_dma.paddr;
+ int igu_sp_sb_index;
+ int igu_seg_id;
+ int port = SC_PORT(sc);
+ int func = SC_FUNC(sc);
+ int reg_offset, reg_offset_en5;
+ uint64_t section;
+ int index, sindex;
+ struct hc_sp_status_block_data sp_sb_data;
+
+ memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
+
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ igu_sp_sb_index = DEF_SB_IGU_ID;
+ igu_seg_id = HC_SEG_ACCESS_DEF;
+ } else {
+ igu_sp_sb_index = sc->igu_dsb_id;
+ igu_seg_id = IGU_SEG_ACCESS_DEF;
+ }
+
+ /* attentions */
+ section = ((uint64_t) mapping +
+ offsetof(struct host_sp_status_block, atten_status_block));
+ def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
+ sc->attn_state = 0;
+
+ reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+
+ reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
+
+ for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
+/* take care of sig[0]..sig[4] */
+ for (sindex = 0; sindex < 4; sindex++) {
+ sc->attn_group[index].sig[sindex] =
+ REG_RD(sc,
+ (reg_offset + (sindex * 0x4) +
+ (0x10 * index)));
+ }
+
+ if (!CHIP_IS_E1x(sc)) {
+ /*
+ * enable5 is separate from the rest of the registers,
+ * and the address skip is 4 and not 16 between the
+ * different groups
+ */
+ sc->attn_group[index].sig[4] =
+ REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
+ } else {
+ sc->attn_group[index].sig[4] = 0;
+ }
+ }
+
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ reg_offset =
+ port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
+ REG_WR(sc, reg_offset, U64_LO(section));
+ REG_WR(sc, (reg_offset + 4), U64_HI(section));
+ } else if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
+ REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
+ }
+
+ section = ((uint64_t) mapping +
+ offsetof(struct host_sp_status_block, sp_sb));
+
+ bnx2x_zero_sp_sb(sc);
+
+ /* PCI guarantees endianity of regpair */
+ sp_sb_data.state = SB_ENABLED;
+ sp_sb_data.host_sb_addr.lo = U64_LO(section);
+ sp_sb_data.host_sb_addr.hi = U64_HI(section);
+ sp_sb_data.igu_sb_id = igu_sp_sb_index;
+ sp_sb_data.igu_seg_id = igu_seg_id;
+ sp_sb_data.p_func.pf_id = func;
+ sp_sb_data.p_func.vnic_id = SC_VN(sc);
+ sp_sb_data.p_func.vf_id = 0xff;
+
+ bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
+
+ bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
+}
+
+static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
+{
+ atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
+ sc->spq_prod_idx = 0;
+ sc->dsb_sp_prod =
+ &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
+ sc->spq_prod_bd = sc->spq;
+ sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
+}
+
+static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
+{
+ union event_ring_elem *elem;
+ int i;
+
+ for (i = 1; i <= NUM_EQ_PAGES; i++) {
+ elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
+
+ elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
+ BNX2X_PAGE_SIZE *
+ (i % NUM_EQ_PAGES)));
+ elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
+ BNX2X_PAGE_SIZE *
+ (i % NUM_EQ_PAGES)));
+ }
+
+ sc->eq_cons = 0;
+ sc->eq_prod = NUM_EQ_DESC;
+ sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
+
+ atomic_store_rel_long(&sc->eq_spq_left,
+ (min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
+ NUM_EQ_DESC) - 1));
+}
+
+static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
+{
+ int i;
+
+ if (IS_MF_SI(sc)) {
+/*
+ * In switch independent mode, the TSTORM needs to accept
+ * packets that failed classification, since approximate match
+ * mac addresses aren't written to NIG LLH.
+ */
+ REG_WR8(sc,
+ (BAR_TSTRORM_INTMEM +
+ TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 2);
+ } else
+ REG_WR8(sc,
+ (BAR_TSTRORM_INTMEM +
+ TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 0);
+
+ /*
+ * Zero this manually as its initialization is currently missing
+ * in the initTool.
+ */
+ for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
+ REG_WR(sc,
+ (BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
+ 0);
+ }
+
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
+ CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
+ HC_IGU_NBC_MODE);
+ }
+}
+
+static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
+{
+ switch (load_code) {
+ case FW_MSG_CODE_DRV_LOAD_COMMON:
+ case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
+ bnx2x_init_internal_common(sc);
+ /* no break */
+
+ case FW_MSG_CODE_DRV_LOAD_PORT:
+ /* nothing to do */
+ /* no break */
+
+ case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+ /* internal memory per function is initialized inside bnx2x_pf_init */
+ break;
+
+ default:
+ PMD_DRV_LOG(NOTICE, "Unknown load_code (0x%x) from MCP",
+ load_code);
+ break;
+ }
+}
+
+static void
+storm_memset_func_cfg(struct bnx2x_softc *sc,
+ struct tstorm_eth_function_common_config *tcfg,
+ uint16_t abs_fid)
+{
+ uint32_t addr;
+ size_t size;
+
+ addr = (BAR_TSTRORM_INTMEM +
+ TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
+ size = sizeof(struct tstorm_eth_function_common_config);
+ ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
+}
+
+static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
+{
+ struct tstorm_eth_function_common_config tcfg = { 0 };
+
+ if (CHIP_IS_E1x(sc)) {
+ storm_memset_func_cfg(sc, &tcfg, p->func_id);
+ }
+
+ /* Enable the function in the FW */
+ storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
+ storm_memset_func_en(sc, p->func_id, 1);
+
+ /* spq */
+ if (p->func_flgs & FUNC_FLG_SPQ) {
+ storm_memset_spq_addr(sc, p->spq_map, p->func_id);
+ REG_WR(sc,
+ (XSEM_REG_FAST_MEMORY +
+ XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
+ }
+}
+
+/*
+ * Calculates the sum of vn_min_rates.
+ * It's needed for further normalizing of the min_rates.
+ * Returns:
+ * sum of vn_min_rates.
+ * or
+ * 0 - if all the min_rates are 0.
+ * In the later case fainess algorithm should be deactivated.
+ * If all min rates are not zero then those that are zeroes will be set to 1.
+ */
+static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
+{
+ uint32_t vn_cfg;
+ uint32_t vn_min_rate;
+ int all_zero = 1;
+ int vn;
+
+ for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+ vn_cfg = sc->devinfo.mf_info.mf_config[vn];
+ vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
+ FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
+
+ if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
+ /* skip hidden VNs */
+ vn_min_rate = 0;
+ } else if (!vn_min_rate) {
+ /* If min rate is zero - set it to 100 */
+ vn_min_rate = DEF_MIN_RATE;
+ } else {
+ all_zero = 0;
+ }
+
+ input->vnic_min_rate[vn] = vn_min_rate;
+ }
+
+ /* if ETS or all min rates are zeros - disable fairness */
+ if (all_zero) {
+ input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+ } else {
+ input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+ }
+}
+
+static uint16_t
+bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
+{
+ uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
+ FUNC_MF_CFG_MAX_BW_SHIFT);
+
+ if (!max_cfg) {
+ PMD_DRV_LOG(DEBUG,
+ "Max BW configured to 0 - using 100 instead");
+ max_cfg = 100;
+ }
+
+ return max_cfg;
+}
+
+static void
+bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
+{
+ uint16_t vn_max_rate;
+ uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
+ uint32_t max_cfg;
+
+ if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
+ vn_max_rate = 0;
+ } else {
+ max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);
+
+ if (IS_MF_SI(sc)) {
+ /* max_cfg in percents of linkspeed */
+ vn_max_rate =
+ ((sc->link_vars.line_speed * max_cfg) / 100);
+ } else { /* SD modes */
+ /* max_cfg is absolute in 100Mb units */
+ vn_max_rate = (max_cfg * 100);
+ }
+ }
+
+ input->vnic_max_rate[vn] = vn_max_rate;
+}
+
+static void
+bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
+{
+ struct cmng_init_input input;
+ int vn;
+
+ memset(&input, 0, sizeof(struct cmng_init_input));
+
+ input.port_rate = sc->link_vars.line_speed;
+
+ if (cmng_type == CMNG_FNS_MINMAX) {
+/* read mf conf from shmem */
+ if (read_cfg) {
+ bnx2x_read_mf_cfg(sc);
+ }
+
+/* get VN min rate and enable fairness if not 0 */
+ bnx2x_calc_vn_min(sc, &input);
+
+/* get VN max rate */
+ if (sc->port.pmf) {
+ for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+ bnx2x_calc_vn_max(sc, vn, &input);
+ }
+ }
+
+/* always enable rate shaping and fairness */
+ input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
+
+ ecore_init_cmng(&input, &sc->cmng);
+ return;
+ }
+}
+
+static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
+{
+ if (CHIP_REV_IS_SLOW(sc)) {
+ return CMNG_FNS_NONE;
+ }
+
+ if (IS_MF(sc)) {
+ return CMNG_FNS_MINMAX;
+ }
+
+ return CMNG_FNS_NONE;
+}
+
+static void
+storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
+{
+ int vn;
+ int func;
+ uint32_t addr;
+ size_t size;
+
+ addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
+ size = sizeof(struct cmng_struct_per_port);
+ ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);
+
+ for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
+ func = func_by_vn(sc, vn);
+
+ addr = (BAR_XSTRORM_INTMEM +
+ XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
+ size = sizeof(struct rate_shaping_vars_per_vn);
+ ecore_storm_memset_struct(sc, addr, size,
+ (uint32_t *) & cmng->
+ vnic.vnic_max_rate[vn]);
+
+ addr = (BAR_XSTRORM_INTMEM +
+ XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
+ size = sizeof(struct fairness_vars_per_vn);
+ ecore_storm_memset_struct(sc, addr, size,
+ (uint32_t *) & cmng->
+ vnic.vnic_min_rate[vn]);
+ }
+}
+
+static void bnx2x_pf_init(struct bnx2x_softc *sc)
+{
+ struct bnx2x_func_init_params func_init;
+ struct event_ring_data eq_data;
+ uint16_t flags;
+
+ memset(&eq_data, 0, sizeof(struct event_ring_data));
+ memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));
+
+ if (!CHIP_IS_E1x(sc)) {
+/* reset IGU PF statistics: MSIX + ATTN */
+/* PF */
+ REG_WR(sc,
+ (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+ (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
+ ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
+ 4)), 0);
+/* ATTN */
+ REG_WR(sc,
+ (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
+ (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
+ (BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
+ ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
+ 4)), 0);
+ }
+
+ /* function setup flags */
+ flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
+
+ func_init.func_flgs = flags;
+ func_init.pf_id = SC_FUNC(sc);
+ func_init.func_id = SC_FUNC(sc);
+ func_init.spq_map = sc->spq_dma.paddr;
+ func_init.spq_prod = sc->spq_prod_idx;
+
+ bnx2x_func_init(sc, &func_init);
+
+ memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
+
+ /*
+ * Congestion management values depend on the link rate.
+ * There is no active link so initial link rate is set to 10Gbps.
+ * When the link comes up the congestion management values are
+ * re-calculated according to the actual link rate.
+ */
+ sc->link_vars.line_speed = SPEED_10000;
+ bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));
+
+ /* Only the PMF sets the HW */
+ if (sc->port.pmf) {
+ storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
+ }
+
+ /* init Event Queue - PCI bus guarantees correct endainity */
+ eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
+ eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
+ eq_data.producer = sc->eq_prod;
+ eq_data.index_id = HC_SP_INDEX_EQ_CONS;
+ eq_data.sb_id = DEF_SB_ID;
+ storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
+}
+
+static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+ uint32_t val = REG_RD(sc, addr);
+ uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
+ || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+ uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+ uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
+
+ if (msix) {
+ val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+ HC_CONFIG_0_REG_INT_LINE_EN_0);
+ val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+ HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+ if (single_msix) {
+ val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
+ }
+ } else if (msi) {
+ val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
+ val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+ HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+ HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+ } else {
+ val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+ HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+ HC_CONFIG_0_REG_INT_LINE_EN_0 |
+ HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+ REG_WR(sc, addr, val);
+
+ val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
+ }
+
+ REG_WR(sc, addr, val);
+
+ /* ensure that HC_CONFIG is written before leading/trailing edge config */
+ mb();
+
+ /* init leading/trailing edge */
+ if (IS_MF(sc)) {
+ val = (0xee0f | (1 << (SC_VN(sc) + 4)));
+ if (sc->port.pmf) {
+ /* enable nig and gpio3 attention */
+ val |= 0x1100;
+ }
+ } else {
+ val = 0xffff;
+ }
+
+ REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
+ REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);
+
+ /* make sure that interrupts are indeed enabled from here on */
+ mb();
+}
+
+static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
+ || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+ uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
+ uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
+
+ val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+ if (msix) {
+ val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+ val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
+ if (single_msix) {
+ val |= IGU_PF_CONF_SINGLE_ISR_EN;
+ }
+ } else if (msi) {
+ val &= ~IGU_PF_CONF_INT_LINE_EN;
+ val |= (IGU_PF_CONF_MSI_MSIX_EN |
+ IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+ } else {
+ val &= ~IGU_PF_CONF_MSI_MSIX_EN;
+ val |= (IGU_PF_CONF_INT_LINE_EN |
+ IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
+ }
+
+ /* clean previous status - need to configure igu prior to ack */
+ if ((!msix) || single_msix) {
+ REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+ bnx2x_ack_int(sc);
+ }
+
+ val |= IGU_PF_CONF_FUNC_EN;
+
+ PMD_DRV_LOG(DEBUG, "write 0x%x to IGU mode %s",
+ val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
+
+ REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+
+ mb();
+
+ /* init leading/trailing edge */
+ if (IS_MF(sc)) {
+ val = (0xee0f | (1 << (SC_VN(sc) + 4)));
+ if (sc->port.pmf) {
+ /* enable nig and gpio3 attention */
+ val |= 0x1100;
+ }
+ } else {
+ val = 0xffff;
+ }
+
+ REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
+ REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
+
+ /* make sure that interrupts are indeed enabled from here on */
+ mb();
+}
+
+static void bnx2x_int_enable(struct bnx2x_softc *sc)
+{
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ bnx2x_hc_int_enable(sc);
+ } else {
+ bnx2x_igu_int_enable(sc);
+ }
+}
+
+static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
+ uint32_t val = REG_RD(sc, addr);
+
+ val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+ HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
+ HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+ /* flush all outstanding writes */
+ mb();
+
+ REG_WR(sc, addr, val);
+ if (REG_RD(sc, addr) != val) {
+ PMD_DRV_LOG(ERR, "proper val not read from HC IGU!");
+ }
+}
+
+static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
+{
+ uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+ val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
+ IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);
+
+ PMD_DRV_LOG(DEBUG, "write %x to IGU", val);
+
+ /* flush all outstanding writes */
+ mb();
+
+ REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+ if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
+ PMD_DRV_LOG(ERR, "proper val not read from IGU!");
+ }
+}
+
+static void bnx2x_int_disable(struct bnx2x_softc *sc)
+{
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ bnx2x_hc_int_disable(sc);
+ } else {
+ bnx2x_igu_int_disable(sc);
+ }
+}
+
+static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
+{
+ int i;
+
+ PMD_INIT_FUNC_TRACE();
+
+ for (i = 0; i < sc->num_queues; i++) {
+ bnx2x_init_eth_fp(sc, i);
+ }
+
+ rmb(); /* ensure status block indices were read */
+
+ bnx2x_init_rx_rings(sc);
+ bnx2x_init_tx_rings(sc);
+
+ if (IS_VF(sc)) {
+ bnx2x_memset_stats(sc);
+ return;
+ }
+
+ /* initialize MOD_ABS interrupts */
+ elink_init_mod_abs_int(sc, &sc->link_vars,
+ sc->devinfo.chip_id,
+ sc->devinfo.shmem_base,
+ sc->devinfo.shmem2_base, SC_PORT(sc));
+
+ bnx2x_init_def_sb(sc);
+ bnx2x_update_dsb_idx(sc);
+ bnx2x_init_sp_ring(sc);
+ bnx2x_init_eq_ring(sc);
+ bnx2x_init_internal(sc, load_code);
+ bnx2x_pf_init(sc);
+ bnx2x_stats_init(sc);
+
+ /* flush all before enabling interrupts */
+ mb();
+
+ bnx2x_int_enable(sc);
+
+ /* check for SPIO5 */
+ bnx2x_attn_int_deasserted0(sc,
+ REG_RD(sc,
+ (MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
+ SC_PORT(sc) * 4)) &
+ AEU_INPUTS_ATTN_BITS_SPIO5);
+}
+
+static void bnx2x_init_objs(struct bnx2x_softc *sc)
+{
+ /* mcast rules must be added to tx if tx switching is enabled */
+ ecore_obj_type o_type;
+ if (sc->flags & BNX2X_TX_SWITCHING)
+ o_type = ECORE_OBJ_TYPE_RX_TX;
+ else
+ o_type = ECORE_OBJ_TYPE_RX;
+
+ /* RX_MODE controlling object */
+ ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
+
+ /* multicast configuration controlling object */
+ ecore_init_mcast_obj(sc,
+ &sc->mcast_obj,
+ sc->fp[0].cl_id,
+ sc->fp[0].index,
+ SC_FUNC(sc),
+ SC_FUNC(sc),
+ BNX2X_SP(sc, mcast_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING(sc, mcast_rdata)), ECORE_FILTER_MCAST_PENDING, &sc->sp_state, o_type);
+
+ /* Setup CAM credit pools */
+ ecore_init_mac_credit_pool(sc,
+ &sc->macs_pool,
+ SC_FUNC(sc),
+ CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
+ VNICS_PER_PATH(sc));
+
+ ecore_init_vlan_credit_pool(sc,
+ &sc->vlans_pool,
+ SC_ABS_FUNC(sc) >> 1,
+ CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
+ VNICS_PER_PATH(sc));
+
+ /* RSS configuration object */
+ ecore_init_rss_config_obj(&sc->rss_conf_obj,
+ sc->fp[0].cl_id,
+ sc->fp[0].index,
+ SC_FUNC(sc),
+ SC_FUNC(sc),
+ BNX2X_SP(sc, rss_rdata), (phys_addr_t) ((void *)
+ BNX2X_SP_MAPPING(sc, rss_rdata)), ECORE_FILTER_RSS_CONF_PENDING, &sc->sp_state, ECORE_OBJ_TYPE_RX);
+}
+
+/*
+ * Initialize the function. This must be called before sending CLIENT_SETUP
+ * for the first client.
+ */
+static int bnx2x_func_start(struct bnx2x_softc *sc)
+{
+ struct ecore_func_state_params func_params = { NULL };
+ struct ecore_func_start_params *start_params =
+ &func_params.params.start;
+
+ /* Prepare parameters for function state transitions */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+ func_params.f_obj = &sc->func_obj;
+ func_params.cmd = ECORE_F_CMD_START;
+
+ /* Function parameters */
+ start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
+ start_params->sd_vlan_tag = OVLAN(sc);
+
+ if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
+ start_params->network_cos_mode = STATIC_COS;
+ } else { /* CHIP_IS_E1X */
+ start_params->network_cos_mode = FW_WRR;
+ }
+
+ start_params->gre_tunnel_mode = 0;
+ start_params->gre_tunnel_rss = 0;
+
+ return ecore_func_state_change(sc, &func_params);
+}
+
+static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
+{
+ uint16_t pmcsr;
+
+ /* If there is no power capability, silently succeed */
+ if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
+ PMD_DRV_LOG(WARN, "No power capability");
+ return 0;
+ }
+
+ pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
+ 2);
+
+ switch (state) {
+ case PCI_PM_D0:
+ pci_write_word(sc,
+ (sc->devinfo.pcie_pm_cap_reg +
+ PCIR_POWER_STATUS),
+ ((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
+
+ if (pmcsr & PCIM_PSTAT_DMASK) {
+ /* delay required during transition out of D3hot */
+ DELAY(20000);
+ }
+
+ break;
+
+ case PCI_PM_D3hot:
+ /* don't shut down the power for emulation and FPGA */
+ if (CHIP_REV_IS_SLOW(sc)) {
+ return 0;
+ }
+
+ pmcsr &= ~PCIM_PSTAT_DMASK;
+ pmcsr |= PCIM_PSTAT_D3;
+
+ if (sc->wol) {
+ pmcsr |= PCIM_PSTAT_PMEENABLE;
+ }
+
+ pci_write_long(sc,
+ (sc->devinfo.pcie_pm_cap_reg +
+ PCIR_POWER_STATUS), pmcsr);
+
+ /*
+ * No more memory access after this point until device is brought back
+ * to D0 state.
+ */
+ break;
+
+ default:
+ PMD_DRV_LOG(NOTICE, "Can't support PCI power state = %d",
+ state);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* return true if succeeded to acquire the lock */
+static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
+{
+ uint32_t lock_status;
+ uint32_t resource_bit = (1 << resource);
+ int func = SC_FUNC(sc);
+ uint32_t hw_lock_control_reg;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ PMD_DRV_LOG(INFO,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return FALSE;
+ }
+
+ if (func <= 5) {
+ hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
+ } else {
+ hw_lock_control_reg =
+ (MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
+ }
+
+ /* try to acquire the lock */
+ REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
+ lock_status = REG_RD(sc, hw_lock_control_reg);
+ if (lock_status & resource_bit) {
+ return TRUE;
+ }
+
+ PMD_DRV_LOG(NOTICE, "Failed to get a resource lock 0x%x", resource);
+
+ return FALSE;
+}
+
+/*
+ * Get the recovery leader resource id according to the engine this function
+ * belongs to. Currently only only 2 engines is supported.
+ */
+static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
+{
+ if (SC_PATH(sc)) {
+ return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
+ } else {
+ return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
+ }
+}
+
+/* try to acquire a leader lock for current engine */
+static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
+{
+ return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
+}
+
+static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
+{
+ return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
+}
+
+/* close gates #2, #3 and #4 */
+static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
+{
+ uint32_t val;
+
+ /* gates #2 and #4a are closed/opened */
+ /* #4 */
+ REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
+ /* #2 */
+ REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);
+
+ /* #3 */
+ if (CHIP_IS_E1x(sc)) {
+/* prevent interrupts from HC on both ports */
+ val = REG_RD(sc, HC_REG_CONFIG_1);
+ if (close)
+ REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
+ HC_CONFIG_1_REG_BLOCK_DISABLE_1));
+ else
+ REG_WR(sc, HC_REG_CONFIG_1,
+ (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));
+
+ val = REG_RD(sc, HC_REG_CONFIG_0);
+ if (close)
+ REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
+ HC_CONFIG_0_REG_BLOCK_DISABLE_0));
+ else
+ REG_WR(sc, HC_REG_CONFIG_0,
+ (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
+
+ } else {
+/* Prevent incomming interrupts in IGU */
+ val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
+
+ if (close)
+ REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
+ (val & ~(uint32_t)
+ IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
+ else
+ REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
+ (val |
+ IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
+ }
+
+ wmb();
+}
+
+/* poll for pending writes bit, it should get cleared in no more than 1s */
+static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
+{
+ uint32_t cnt = 1000;
+ uint32_t pend_bits = 0;
+
+ do {
+ pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
+
+ if (pend_bits == 0) {
+ break;
+ }
+
+ DELAY(1000);
+ } while (cnt-- > 0);
+
+ if (cnt <= 0) {
+ PMD_DRV_LOG(NOTICE, "Still pending IGU requests bits=0x%08x!",
+ pend_bits);
+ return -1;
+ }
+
+ return 0;
+}
+
+#define SHARED_MF_CLP_MAGIC 0x80000000 /* 'magic' bit */
+
+static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
+{
+ /* Do some magic... */
+ uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
+ *magic_val = val & SHARED_MF_CLP_MAGIC;
+ MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
+}
+
+/* restore the value of the 'magic' bit */
+static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
+{
+ /* Restore the 'magic' bit value... */
+ uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
+ MFCFG_WR(sc, shared_mf_config.clp_mb,
+ (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
+}
+
+/* prepare for MCP reset, takes care of CLP configurations */
+static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
+{
+ uint32_t shmem;
+ uint32_t validity_offset;
+
+ /* set `magic' bit in order to save MF config */
+ bnx2x_clp_reset_prep(sc, magic_val);
+
+ /* get shmem offset */
+ shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+ validity_offset =
+ offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
+
+ /* Clear validity map flags */
+ if (shmem > 0) {
+ REG_WR(sc, shmem + validity_offset, 0);
+ }
+}
+
+#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
+#define MCP_ONE_TIMEOUT 100 /* 100 ms */
+
+static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
+{
+ /* special handling for emulation and FPGA (10 times longer) */
+ if (CHIP_REV_IS_SLOW(sc)) {
+ DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
+ } else {
+ DELAY((MCP_ONE_TIMEOUT) * 1000);
+ }
+}
+
+/* initialize shmem_base and waits for validity signature to appear */
+static int bnx2x_init_shmem(struct bnx2x_softc *sc)
+{
+ int cnt = 0;
+ uint32_t val = 0;
+
+ do {
+ sc->devinfo.shmem_base =
+ sc->link_params.shmem_base =
+ REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+
+ if (sc->devinfo.shmem_base) {
+ val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
+ if (val & SHR_MEM_VALIDITY_MB)
+ return 0;
+ }
+
+ bnx2x_mcp_wait_one(sc);
+
+ } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
+
+ PMD_DRV_LOG(NOTICE, "BAD MCP validity signature");
+
+ return -1;
+}
+
+static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
+{
+ int rc = bnx2x_init_shmem(sc);
+
+ /* Restore the `magic' bit value */
+ bnx2x_clp_reset_done(sc, magic_val);
+
+ return rc;
+}
+
+static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
+{
+ REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
+ REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
+ wmb();
+}
+
+/*
+ * Reset the whole chip except for:
+ * - PCIE core
+ * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
+ * - IGU
+ * - MISC (including AEU)
+ * - GRC
+ * - RBCN, RBCP
+ */
+static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
+{
+ uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
+ uint32_t global_bits2, stay_reset2;
+
+ /*
+ * Bits that have to be set in reset_mask2 if we want to reset 'global'
+ * (per chip) blocks.
+ */
+ global_bits2 =
+ MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
+ MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
+
+ /*
+ * Don't reset the following blocks.
+ * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
+ * reset, as in 4 port device they might still be owned
+ * by the MCP (there is only one leader per path).
+ */
+ not_reset_mask1 =
+ MISC_REGISTERS_RESET_REG_1_RST_HC |
+ MISC_REGISTERS_RESET_REG_1_RST_PXPV |
+ MISC_REGISTERS_RESET_REG_1_RST_PXP;
+
+ not_reset_mask2 =
+ MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
+ MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
+ MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
+ MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
+ MISC_REGISTERS_RESET_REG_2_RST_RBCN |
+ MISC_REGISTERS_RESET_REG_2_RST_GRC |
+ MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
+ MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
+ MISC_REGISTERS_RESET_REG_2_RST_ATC |
+ MISC_REGISTERS_RESET_REG_2_PGLC |
+ MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
+ MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
+ MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
+ MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
+ MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;
+
+ /*
+ * Keep the following blocks in reset:
+ * - all xxMACs are handled by the elink code.
+ */
+ stay_reset2 =
+ MISC_REGISTERS_RESET_REG_2_XMAC |
+ MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
+
+ /* Full reset masks according to the chip */
+ reset_mask1 = 0xffffffff;
+
+ if (CHIP_IS_E1H(sc))
+ reset_mask2 = 0x1ffff;
+ else if (CHIP_IS_E2(sc))
+ reset_mask2 = 0xfffff;
+ else /* CHIP_IS_E3 */
+ reset_mask2 = 0x3ffffff;
+
+ /* Don't reset global blocks unless we need to */
+ if (!global)
+ reset_mask2 &= ~global_bits2;
+
+ /*
+ * In case of attention in the QM, we need to reset PXP
+ * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
+ * because otherwise QM reset would release 'close the gates' shortly
+ * before resetting the PXP, then the PSWRQ would send a write
+ * request to PGLUE. Then when PXP is reset, PGLUE would try to
+ * read the payload data from PSWWR, but PSWWR would not
+ * respond. The write queue in PGLUE would stuck, dmae commands
+ * would not return. Therefore it's important to reset the second
+ * reset register (containing the
+ * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
+ * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
+ * bit).
+ */
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ reset_mask2 & (~not_reset_mask2));
+
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+ reset_mask1 & (~not_reset_mask1));
+
+ mb();
+ wmb();
+
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ reset_mask2 & (~stay_reset2));
+
+ mb();
+ wmb();
+
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
+ wmb();
+}
+
+static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
+{
+ int cnt = 1000;
+ uint32_t val = 0;
+ uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
+ uint32_t tags_63_32 = 0;
+
+ /* Empty the Tetris buffer, wait for 1s */
+ do {
+ sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
+ blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
+ port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
+ port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
+ pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
+ if (CHIP_IS_E3(sc)) {
+ tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
+ }
+
+ if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
+ ((port_is_idle_0 & 0x1) == 0x1) &&
+ ((port_is_idle_1 & 0x1) == 0x1) &&
+ (pgl_exp_rom2 == 0xffffffff) &&
+ (!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
+ break;
+ DELAY(1000);
+ } while (cnt-- > 0);
+
+ if (cnt <= 0) {
+ PMD_DRV_LOG(NOTICE,
+ "ERROR: Tetris buffer didn't get empty or there "
+ "are still outstanding read requests after 1s! "
+ "sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
+ "port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
+ sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
+ pgl_exp_rom2);
+ return -1;
+ }
+
+ mb();
+
+ /* Close gates #2, #3 and #4 */
+ bnx2x_set_234_gates(sc, TRUE);
+
+ /* Poll for IGU VQs for 57712 and newer chips */
+ if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
+ return -1;
+ }
+
+ /* clear "unprepared" bit */
+ REG_WR(sc, MISC_REG_UNPREPARED, 0);
+ mb();
+
+ /* Make sure all is written to the chip before the reset */
+ wmb();
+
+ /*
+ * Wait for 1ms to empty GLUE and PCI-E core queues,
+ * PSWHST, GRC and PSWRD Tetris buffer.
+ */
+ DELAY(1000);
+
+ /* Prepare to chip reset: */
+ /* MCP */
+ if (global) {
+ bnx2x_reset_mcp_prep(sc, &val);
+ }
+
+ /* PXP */
+ bnx2x_pxp_prep(sc);
+ mb();
+
+ /* reset the chip */
+ bnx2x_process_kill_chip_reset(sc, global);
+ mb();
+
+ /* Recover after reset: */
+ /* MCP */
+ if (global && bnx2x_reset_mcp_comp(sc, val)) {
+ return -1;
+ }
+
+ /* Open the gates #2, #3 and #4 */
+ bnx2x_set_234_gates(sc, FALSE);
+
+ return 0;
+}
+
+static int bnx2x_leader_reset(struct bnx2x_softc *sc)
+{
+ int rc = 0;
+ uint8_t global = bnx2x_reset_is_global(sc);
+ uint32_t load_code;
+
+ /*
+ * If not going to reset MCP, load "fake" driver to reset HW while
+ * driver is owner of the HW.
+ */
+ if (!global && !BNX2X_NOMCP(sc)) {
+ load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
+ DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+ if (!load_code) {
+ PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
+ rc = -1;
+ goto exit_leader_reset;
+ }
+
+ if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
+ (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
+ PMD_DRV_LOG(NOTICE,
+ "MCP unexpected response, aborting");
+ rc = -1;
+ goto exit_leader_reset2;
+ }
+
+ load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+ if (!load_code) {
+ PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
+ rc = -1;
+ goto exit_leader_reset2;
+ }
+ }
+
+ /* try to recover after the failure */
+ if (bnx2x_process_kill(sc, global)) {
+ PMD_DRV_LOG(NOTICE, "Something bad occurred on engine %d!",
+ SC_PATH(sc));
+ rc = -1;
+ goto exit_leader_reset2;
+ }
+
+ /*
+ * Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
+ * state.
+ */
+ bnx2x_set_reset_done(sc);
+ if (global) {
+ bnx2x_clear_reset_global(sc);
+ }
+
+exit_leader_reset2:
+
+ /* unload "fake driver" if it was loaded */
+ if (!global &&!BNX2X_NOMCP(sc)) {
+ bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+ bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ }
+
+exit_leader_reset:
+
+ sc->is_leader = 0;
+ bnx2x_release_leader_lock(sc);
+
+ mb();
+ return rc;
+}
+
+/*
+ * prepare INIT transition, parameters configured:
+ * - HC configuration
+ * - Queue's CDU context
+ */
+static void
+bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ struct ecore_queue_init_params *init_params)
+{
+ uint8_t cos;
+ int cxt_index, cxt_offset;
+
+ bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
+ bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
+
+ bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
+ bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
+
+ /* HC rate */
+ init_params->rx.hc_rate =
+ sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
+ init_params->tx.hc_rate =
+ sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
+
+ /* FW SB ID */
+ init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
+
+ /* CQ index among the SB indices */
+ init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+ init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
+
+ /* set maximum number of COSs supported by this queue */
+ init_params->max_cos = sc->max_cos;
+
+ /* set the context pointers queue object */
+ for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
+ cxt_index = fp->index / ILT_PAGE_CIDS;
+ cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
+ init_params->cxts[cos] =
+ &sc->context[cxt_index].vcxt[cxt_offset].eth;
+ }
+}
+
+/* set flags that are common for the Tx-only and not normal connections */
+static unsigned long
+bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
+{
+ unsigned long flags = 0;
+
+ /* PF driver will always initialize the Queue to an ACTIVE state */
+ bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
+
+ /*
+ * tx only connections collect statistics (on the same index as the
+ * parent connection). The statistics are zeroed when the parent
+ * connection is initialized.
+ */
+
+ bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
+ if (zero_stats) {
+ bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
+ }
+
+ /*
+ * tx only connections can support tx-switching, though their
+ * CoS-ness doesn't survive the loopback
+ */
+ if (sc->flags & BNX2X_TX_SWITCHING) {
+ bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
+ }
+
+ bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
+
+ return flags;
+}
+
+static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
+{
+ unsigned long flags = 0;
+
+ if (IS_MF_SD(sc)) {
+ bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
+ }
+
+ if (leading) {
+ bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
+ bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
+ }
+
+ bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
+
+ /* merge with common flags */
+ return flags | bnx2x_get_common_flags(sc, TRUE);
+}
+
+static void
+bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ struct ecore_general_setup_params *gen_init, uint8_t cos)
+{
+ gen_init->stat_id = bnx2x_stats_id(fp);
+ gen_init->spcl_id = fp->cl_id;
+ gen_init->mtu = sc->mtu;
+ gen_init->cos = cos;
+}
+
+static void
+bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ struct rxq_pause_params *pause,
+ struct ecore_rxq_setup_params *rxq_init)
+{
+ struct bnx2x_rx_queue *rxq;
+
+ rxq = sc->rx_queues[fp->index];
+ if (!rxq) {
+ PMD_RX_LOG(ERR, "RX queue is NULL");
+ return;
+ }
+ /* pause */
+ pause->bd_th_lo = BD_TH_LO(sc);
+ pause->bd_th_hi = BD_TH_HI(sc);
+
+ pause->rcq_th_lo = RCQ_TH_LO(sc);
+ pause->rcq_th_hi = RCQ_TH_HI(sc);
+
+ /* validate rings have enough entries to cross high thresholds */
+ if (sc->dropless_fc &&
+ pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
+ PMD_DRV_LOG(WARN, "rx bd ring threshold limit");
+ }
+
+ if (sc->dropless_fc &&
+ pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
+ PMD_DRV_LOG(WARN, "rcq ring threshold limit");
+ }
+
+ pause->pri_map = 1;
+
+ /* rxq setup */
+ rxq_init->dscr_map = (phys_addr_t)((void *)rxq->rx_ring_phys_addr);
+ rxq_init->rcq_map = (phys_addr_t)((void *)rxq->cq_ring_phys_addr);
+ rxq_init->rcq_np_map = (phys_addr_t)((void *)(rxq->cq_ring_phys_addr +
+ BNX2X_PAGE_SIZE));
+
+ /*
+ * This should be a maximum number of data bytes that may be
+ * placed on the BD (not including paddings).
+ */
+ rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);
+
+ rxq_init->cl_qzone_id = fp->cl_qzone_id;
+ rxq_init->rss_engine_id = SC_FUNC(sc);
+ rxq_init->mcast_engine_id = SC_FUNC(sc);
+
+ rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
+ rxq_init->fw_sb_id = fp->fw_sb_id;
+
+ rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
+
+ /*
+ * configure silent vlan removal
+ * if multi function mode is afex, then mask default vlan
+ */
+ if (IS_MF_AFEX(sc)) {
+ rxq_init->silent_removal_value =
+ sc->devinfo.mf_info.afex_def_vlan_tag;
+ rxq_init->silent_removal_mask = EVL_VLID_MASK;
+ }
+}
+
+static void
+bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
+ struct ecore_txq_setup_params *txq_init, uint8_t cos)
+{
+ struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
+
+ if (!txq) {
+ PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
+ return;
+ }
+ txq_init->dscr_map = (phys_addr_t)((void *)txq->tx_ring_phys_addr);
+ txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
+ txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
+ txq_init->fw_sb_id = fp->fw_sb_id;
+
+ /*
+ * set the TSS leading client id for TX classfication to the
+ * leading RSS client id
+ */
+ txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
+}
+
+/*
+ * This function performs 2 steps in a queue state machine:
+ * 1) RESET->INIT
+ * 2) INIT->SETUP
+ */
+static int
+bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
+{
+ struct ecore_queue_state_params q_params = { NULL };
+ struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
+ int rc;
+
+ PMD_DRV_LOG(DEBUG, "setting up queue %d", fp->index);
+
+ bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
+
+ q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
+
+ /* we want to wait for completion in this context */
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+
+ /* prepare the INIT parameters */
+ bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
+
+ /* Set the command */
+ q_params.cmd = ECORE_Q_CMD_INIT;
+
+ /* Change the state to INIT */
+ rc = ecore_queue_state_change(sc, &q_params);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Queue(%d) INIT failed", fp->index);
+ return rc;
+ }
+
+ PMD_DRV_LOG(DEBUG, "init complete");
+
+ /* now move the Queue to the SETUP state */
+ memset(setup_params, 0, sizeof(*setup_params));
+
+ /* set Queue flags */
+ setup_params->flags = bnx2x_get_q_flags(sc, leading);
+
+ /* set general SETUP parameters */
+ bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
+ FIRST_TX_COS_INDEX);
+
+ bnx2x_pf_rx_q_prep(sc, fp,
+ &setup_params->pause_params,
+ &setup_params->rxq_params);
+
+ bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);
+
+ /* Set the command */
+ q_params.cmd = ECORE_Q_CMD_SETUP;
+
+ /* change the state to SETUP */
+ rc = ecore_queue_state_change(sc, &q_params);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Queue(%d) SETUP failed", fp->index);
+ return rc;
+ }
+
+ return rc;
+}
+
+static int bnx2x_setup_leading(struct bnx2x_softc *sc)
+{
+ if (IS_PF(sc))
+ return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
+ else /* VF */
+ return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
+}
+
+static int
+bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
+ uint8_t config_hash)
+{
+ struct ecore_config_rss_params params = { NULL };
+ uint32_t i;
+
+ /*
+ * Although RSS is meaningless when there is a single HW queue we
+ * still need it enabled in order to have HW Rx hash generated.
+ */
+
+ params.rss_obj = rss_obj;
+
+ bnx2x_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
+
+ bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
+
+ /* RSS configuration */
+ bnx2x_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
+ bnx2x_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
+ bnx2x_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
+ bnx2x_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
+ if (rss_obj->udp_rss_v4) {
+ bnx2x_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
+ }
+ if (rss_obj->udp_rss_v6) {
+ bnx2x_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
+ }
+
+ /* Hash bits */
+ params.rss_result_mask = MULTI_MASK;
+
+ (void)rte_memcpy(params.ind_table, rss_obj->ind_table,
+ sizeof(params.ind_table));
+
+ if (config_hash) {
+/* RSS keys */
+ for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
+ params.rss_key[i] = (uint32_t) rte_rand();
+ }
+
+ bnx2x_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
+ }
+
+ if (IS_PF(sc))
+ return ecore_config_rss(sc, ¶ms);
+ else
+ return bnx2x_vf_config_rss(sc, ¶ms);
+}
+
+static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
+{
+ return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
+}
+
+static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
+{
+ uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
+ uint32_t i;
+
+ /*
+ * Prepare the initial contents of the indirection table if
+ * RSS is enabled
+ */
+ for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
+ sc->rss_conf_obj.ind_table[i] =
+ (sc->fp->cl_id + (i % num_eth_queues));
+ }
+
+ if (sc->udp_rss) {
+ sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
+ }
+
+ /*
+ * For 57711 SEARCHER configuration (rss_keys) is
+ * per-port, so if explicit configuration is needed, do it only
+ * for a PMF.
+ *
+ * For 57712 and newer it's a per-function configuration.
+ */
+ return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
+}
+
+static int
+bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
+ struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
+ unsigned long *ramrod_flags)
+{
+ struct ecore_vlan_mac_ramrod_params ramrod_param;
+ int rc;
+
+ memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+ /* fill in general parameters */
+ ramrod_param.vlan_mac_obj = obj;
+ ramrod_param.ramrod_flags = *ramrod_flags;
+
+ /* fill a user request section if needed */
+ if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
+ (void)rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
+ ETH_ALEN);
+
+ bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
+
+/* Set the command: ADD or DEL */
+ ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
+ ECORE_VLAN_MAC_DEL;
+ }
+
+ rc = ecore_config_vlan_mac(sc, &ramrod_param);
+
+ if (rc == ECORE_EXISTS) {
+ PMD_DRV_LOG(INFO, "Failed to schedule ADD operations (EEXIST)");
+/* do not treat adding same MAC as error */
+ rc = 0;
+ } else if (rc < 0) {
+ PMD_DRV_LOG(ERR,
+ "%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
+ }
+
+ return rc;
+}
+
+static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
+{
+ unsigned long ramrod_flags = 0;
+
+ PMD_DRV_LOG(DEBUG, "Adding Ethernet MAC");
+
+ bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+
+ /* Eth MAC is set on RSS leading client (fp[0]) */
+ return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
+ &sc->sp_objs->mac_obj,
+ set, ECORE_ETH_MAC, &ramrod_flags);
+}
+
+static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
+{
+ uint32_t sel_phy_idx = 0;
+
+ if (sc->link_params.num_phys <= 1) {
+ return ELINK_INT_PHY;
+ }
+
+ if (sc->link_vars.link_up) {
+ sel_phy_idx = ELINK_EXT_PHY1;
+/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
+ if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
+ (sc->link_params.phy[ELINK_EXT_PHY2].supported &
+ ELINK_SUPPORTED_FIBRE))
+ sel_phy_idx = ELINK_EXT_PHY2;
+ } else {
+ switch (elink_phy_selection(&sc->link_params)) {
+ case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ sel_phy_idx = ELINK_EXT_PHY1;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ sel_phy_idx = ELINK_EXT_PHY2;
+ break;
+ }
+ }
+
+ return sel_phy_idx;
+}
+
+static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
+{
+ uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);
+
+ /*
+ * The selected activated PHY is always after swapping (in case PHY
+ * swapping is enabled). So when swapping is enabled, we need to reverse
+ * the configuration
+ */
+
+ if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+ if (sel_phy_idx == ELINK_EXT_PHY1)
+ sel_phy_idx = ELINK_EXT_PHY2;
+ else if (sel_phy_idx == ELINK_EXT_PHY2)
+ sel_phy_idx = ELINK_EXT_PHY1;
+ }
+
+ return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
+}
+
+static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
+{
+ /*
+ * Initialize link parameters structure variables
+ * It is recommended to turn off RX FC for jumbo frames
+ * for better performance
+ */
+ if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
+ sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
+ } else {
+ sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
+ }
+}
+
+static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
+{
+ uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
+ switch (sc->link_vars.ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
+ default:
+ sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
+ break;
+
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
+ sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
+ break;
+
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
+ sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
+ break;
+ }
+}
+
+static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
+{
+ uint16_t line_speed = sc->link_vars.line_speed;
+ if (IS_MF(sc)) {
+ uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
+ sc->devinfo.
+ mf_info.mf_config[SC_VN
+ (sc)]);
+
+/* calculate the current MAX line speed limit for the MF devices */
+ if (IS_MF_SI(sc)) {
+ line_speed = (line_speed * maxCfg) / 100;
+ } else { /* SD mode */
+ uint16_t vn_max_rate = maxCfg * 100;
+
+ if (vn_max_rate < line_speed) {
+ line_speed = vn_max_rate;
+ }
+ }
+ }
+
+ return line_speed;
+}
+
+static void
+bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
+{
+ uint16_t line_speed = bnx2x_get_mf_speed(sc);
+
+ memset(data, 0, sizeof(*data));
+
+ /* fill the report data with the effective line speed */
+ data->line_speed = line_speed;
+
+ /* Link is down */
+ if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
+ bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &data->link_report_flags);
+ }
+
+ /* Full DUPLEX */
+ if (sc->link_vars.duplex == DUPLEX_FULL) {
+ bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+ &data->link_report_flags);
+ }
+
+ /* Rx Flow Control is ON */
+ if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
+ bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+ }
+
+ /* Tx Flow Control is ON */
+ if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
+ bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+ }
+}
+
+/* report link status to OS, should be called under phy_lock */
+static void bnx2x_link_report(struct bnx2x_softc *sc)
+{
+ struct bnx2x_link_report_data cur_data;
+
+ /* reread mf_cfg */
+ if (IS_PF(sc)) {
+ bnx2x_read_mf_cfg(sc);
+ }
+
+ /* Read the current link report info */
+ bnx2x_fill_report_data(sc, &cur_data);
+
+ /* Don't report link down or exactly the same link status twice */
+ if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
+ (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &sc->last_reported_link.link_report_flags) &&
+ bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags))) {
+ return;
+ }
+
+ sc->link_cnt++;
+
+ /* report new link params and remember the state for the next time */
+ (void)rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
+
+ if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags)) {
+ PMD_DRV_LOG(INFO, "NIC Link is Down");
+ } else {
+ __rte_unused const char *duplex;
+ __rte_unused const char *flow;
+
+ if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+ &cur_data.link_report_flags)) {
+ duplex = "full";
+ } else {
+ duplex = "half";
+ }
+
+/*
+ * Handle the FC at the end so that only these flags would be
+ * possibly set. This way we may easily check if there is no FC
+ * enabled.
+ */
+ if (cur_data.link_report_flags) {
+ if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ &cur_data.link_report_flags) &&
+ bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ &cur_data.link_report_flags)) {
+ flow = "ON - receive & transmit";
+ } else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ &cur_data.link_report_flags) &&
+ !bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ &cur_data.link_report_flags)) {
+ flow = "ON - receive";
+ } else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ &cur_data.link_report_flags) &&
+ bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ &cur_data.link_report_flags)) {
+ flow = "ON - transmit";
+ } else {
+ flow = "none"; /* possible? */
+ }
+ } else {
+ flow = "none";
+ }
+
+ PMD_DRV_LOG(INFO,
+ "NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
+ cur_data.line_speed, duplex, flow);
+ }
+}
+
+void bnx2x_link_status_update(struct bnx2x_softc *sc)
+{
+ if (sc->state != BNX2X_STATE_OPEN) {
+ return;
+ }
+
+ if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
+ elink_link_status_update(&sc->link_params, &sc->link_vars);
+ } else {
+ sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
+ ELINK_SUPPORTED_10baseT_Full |
+ ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full |
+ ELINK_SUPPORTED_1000baseT_Full |
+ ELINK_SUPPORTED_2500baseX_Full |
+ ELINK_SUPPORTED_10000baseT_Full |
+ ELINK_SUPPORTED_TP |
+ ELINK_SUPPORTED_FIBRE |
+ ELINK_SUPPORTED_Autoneg |
+ ELINK_SUPPORTED_Pause |
+ ELINK_SUPPORTED_Asym_Pause);
+ sc->port.advertising[0] = sc->port.supported[0];
+
+ sc->link_params.sc = sc;
+ sc->link_params.port = SC_PORT(sc);
+ sc->link_params.req_duplex[0] = DUPLEX_FULL;
+ sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
+ sc->link_params.req_line_speed[0] = SPEED_10000;
+ sc->link_params.speed_cap_mask[0] = 0x7f0000;
+ sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
+
+ if (CHIP_REV_IS_FPGA(sc)) {
+ sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
+ sc->link_vars.line_speed = ELINK_SPEED_1000;
+ sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
+ LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
+ } else {
+ sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
+ sc->link_vars.line_speed = ELINK_SPEED_10000;
+ sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
+ LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
+ }
+
+ sc->link_vars.link_up = 1;
+
+ sc->link_vars.duplex = DUPLEX_FULL;
+ sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
+
+ if (IS_PF(sc)) {
+ REG_WR(sc,
+ NIG_REG_EGRESS_DRAIN0_MODE +
+ sc->link_params.port * 4, 0);
+ bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+ bnx2x_link_report(sc);
+ }
+ }
+
+ if (IS_PF(sc)) {
+ if (sc->link_vars.link_up) {
+ bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+ } else {
+ bnx2x_stats_handle(sc, STATS_EVENT_STOP);
+ }
+ bnx2x_link_report(sc);
+ } else {
+ bnx2x_link_report(sc);
+ bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+ }
+}
+
+static void bnx2x_periodic_start(struct bnx2x_softc *sc)
+{
+ atomic_store_rel_long(&sc->periodic_flags, PERIODIC_GO);
+}
+
+static void bnx2x_periodic_stop(struct bnx2x_softc *sc)
+{
+ atomic_store_rel_long(&sc->periodic_flags, PERIODIC_STOP);
+}
+
+static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
+{
+ int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
+ uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
+ struct elink_params *lp = &sc->link_params;
+
+ bnx2x_set_requested_fc(sc);
+
+ if (CHIP_REV_IS_SLOW(sc)) {
+ uint32_t bond = CHIP_BOND_ID(sc);
+ uint32_t feat = 0;
+
+ if (CHIP_IS_E2(sc) && CHIP_IS_MODE_4_PORT(sc)) {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
+ } else if (bond & 0x4) {
+ if (CHIP_IS_E3(sc)) {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC;
+ } else {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
+ }
+ } else if (bond & 0x8) {
+ if (CHIP_IS_E3(sc)) {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC;
+ } else {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
+ }
+ }
+
+/* disable EMAC for E3 and above */
+ if (bond & 0x2) {
+ feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
+ }
+
+ sc->link_params.feature_config_flags |= feat;
+ }
+
+ if (load_mode == LOAD_DIAG) {
+ lp->loopback_mode = ELINK_LOOPBACK_XGXS;
+/* Prefer doing PHY loopback at 10G speed, if possible */
+ if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
+ if (lp->speed_cap_mask[cfg_idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
+ } else {
+ lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
+ }
+ }
+ }
+
+ if (load_mode == LOAD_LOOPBACK_EXT) {
+ lp->loopback_mode = ELINK_LOOPBACK_EXT;
+ }
+
+ rc = elink_phy_init(&sc->link_params, &sc->link_vars);
+
+ bnx2x_calc_fc_adv(sc);
+
+ if (sc->link_vars.link_up) {
+ bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
+ bnx2x_link_report(sc);
+ }
+
+ if (!CHIP_REV_IS_SLOW(sc)) {
+ bnx2x_periodic_start(sc);
+ }
+
+ sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
+ return rc;
+}
+
+/* update flags in shmem */
+static void
+bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
+{
+ uint32_t drv_flags;
+
+ if (SHMEM2_HAS(sc, drv_flags)) {
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
+ drv_flags = SHMEM2_RD(sc, drv_flags);
+
+ if (set) {
+ drv_flags |= flags;
+ } else {
+ drv_flags &= ~flags;
+ }
+
+ SHMEM2_WR(sc, drv_flags, drv_flags);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
+ }
+}
+
+/* periodic timer callout routine, only runs when the interface is up */
+void bnx2x_periodic_callout(struct bnx2x_softc *sc)
+{
+ if ((sc->state != BNX2X_STATE_OPEN) ||
+ (atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
+ PMD_DRV_LOG(WARN, "periodic callout exit (state=0x%x)",
+ sc->state);
+ return;
+ }
+ if (!CHIP_REV_IS_SLOW(sc)) {
+/*
+ * This barrier is needed to ensure the ordering between the writing
+ * to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
+ * the reading here.
+ */
+ mb();
+ if (sc->port.pmf) {
+ elink_period_func(&sc->link_params, &sc->link_vars);
+ }
+ }
+#ifdef BNX2X_PULSE
+ if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+ int mb_idx = SC_FW_MB_IDX(sc);
+ uint32_t drv_pulse;
+ uint32_t mcp_pulse;
+
+ ++sc->fw_drv_pulse_wr_seq;
+ sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
+
+ drv_pulse = sc->fw_drv_pulse_wr_seq;
+ bnx2x_drv_pulse(sc);
+
+ mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
+ MCP_PULSE_SEQ_MASK);
+
+/*
+ * The delta between driver pulse and mcp response should
+ * be 1 (before mcp response) or 0 (after mcp response).
+ */
+ if ((drv_pulse != mcp_pulse) &&
+ (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
+ /* someone lost a heartbeat... */
+ PMD_DRV_LOG(ERR,
+ "drv_pulse (0x%x) != mcp_pulse (0x%x)",
+ drv_pulse, mcp_pulse);
+ }
+ }
+#endif
+}
+
+/* start the controller */
+static __attribute__ ((noinline))
+int bnx2x_nic_load(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ uint32_t load_code = 0;
+ int i, rc = 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;
+
+ if (IS_PF(sc)) {
+/* must be called before memory allocation and HW init */
+ bnx2x_ilt_set_info(sc);
+ }
+
+ bnx2x_set_fp_rx_buf_size(sc);
+
+ if (IS_PF(sc)) {
+ if (bnx2x_alloc_mem(sc) != 0) {
+ sc->state = BNX2X_STATE_CLOSED;
+ rc = -ENOMEM;
+ goto bnx2x_nic_load_error0;
+ }
+ }
+
+ if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
+ sc->state = BNX2X_STATE_CLOSED;
+ rc = -ENOMEM;
+ goto bnx2x_nic_load_error0;
+ }
+
+ if (IS_VF(sc)) {
+ rc = bnx2x_vf_init(sc);
+ if (rc) {
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error0;
+ }
+ }
+
+ if (IS_PF(sc)) {
+/* set pf load just before approaching the MCP */
+ bnx2x_set_pf_load(sc);
+
+/* if MCP exists send load request and analyze response */
+ if (!BNX2X_NOMCP(sc)) {
+ /* attempt to load pf */
+ if (bnx2x_nic_load_request(sc, &load_code) != 0) {
+ sc->state = BNX2X_STATE_CLOSED;
+ rc = -ENXIO;
+ goto bnx2x_nic_load_error1;
+ }
+
+ /* what did the MCP say? */
+ if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
+ bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+ sc->state = BNX2X_STATE_CLOSED;
+ rc = -ENXIO;
+ goto bnx2x_nic_load_error2;
+ }
+ } else {
+ PMD_DRV_LOG(INFO, "Device has no MCP!");
+ load_code = bnx2x_nic_load_no_mcp(sc);
+ }
+
+/* mark PMF if applicable */
+ bnx2x_nic_load_pmf(sc, load_code);
+
+/* Init Function state controlling object */
+ bnx2x_init_func_obj(sc);
+
+/* Initialize HW */
+ if (bnx2x_init_hw(sc, load_code) != 0) {
+ PMD_DRV_LOG(NOTICE, "HW init failed");
+ bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+ sc->state = BNX2X_STATE_CLOSED;
+ rc = -ENXIO;
+ goto bnx2x_nic_load_error2;
+ }
+ }
+
+ bnx2x_nic_init(sc, load_code);
+
+ /* Init per-function objects */
+ if (IS_PF(sc)) {
+ bnx2x_init_objs(sc);
+
+/* set AFEX default VLAN tag to an invalid value */
+ sc->devinfo.mf_info.afex_def_vlan_tag = -1;
+
+ sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
+ rc = bnx2x_func_start(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Function start failed!");
+ bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+
+/* send LOAD_DONE command to MCP */
+ if (!BNX2X_NOMCP(sc)) {
+ load_code =
+ bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
+ if (!load_code) {
+ PMD_DRV_LOG(NOTICE,
+ "MCP response failure, aborting");
+ sc->state = BNX2X_STATE_ERROR;
+ rc = -ENXIO;
+ goto bnx2x_nic_load_error3;
+ }
+ }
+ }
+
+ rc = bnx2x_setup_leading(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Setup leading failed!");
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+
+ FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
+ if (IS_PF(sc))
+ rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
+ else /* IS_VF(sc) */
+ rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);
+
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Queue(%d) setup failed", i);
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+ }
+
+ rc = bnx2x_init_rss_pf(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "PF RSS init failed");
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+
+ /* now when Clients are configured we are ready to work */
+ sc->state = BNX2X_STATE_OPEN;
+
+ /* Configure a ucast MAC */
+ if (IS_PF(sc)) {
+ rc = bnx2x_set_eth_mac(sc, TRUE);
+ } else { /* IS_VF(sc) */
+ rc = bnx2x_vf_set_mac(sc, TRUE);
+ }
+
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Setting Ethernet MAC failed");
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+
+ if (sc->port.pmf) {
+ rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
+ if (rc) {
+ sc->state = BNX2X_STATE_ERROR;
+ goto bnx2x_nic_load_error3;
+ }
+ }
+
+ sc->link_params.feature_config_flags &=
+ ~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
+
+ /* start the Tx */
+ switch (LOAD_OPEN) {
+ case LOAD_NORMAL:
+ case LOAD_OPEN:
+ break;
+
+ case LOAD_DIAG:
+ case LOAD_LOOPBACK_EXT:
+ sc->state = BNX2X_STATE_DIAG;
+ break;
+
+ default:
+ break;
+ }
+
+ if (sc->port.pmf) {
+ bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
+ } else {
+ bnx2x_link_status_update(sc);
+ }
+
+ if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
+/* mark driver is loaded in shmem2 */
+ val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
+ SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
+ (val |
+ DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
+ DRV_FLAGS_CAPABILITIES_LOADED_L2));
+ }
+
+ /* start fast path */
+ /* Initialize Rx filter */
+ bnx2x_set_rx_mode(sc);
+
+ /* wait for all pending SP commands to complete */
+ if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
+ PMD_DRV_LOG(NOTICE, "Timeout waiting for all SPs to complete!");
+ bnx2x_periodic_stop(sc);
+ bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
+ return -ENXIO;
+ }
+
+ PMD_DRV_LOG(DEBUG, "NIC successfully loaded");
+
+ return 0;
+
+bnx2x_nic_load_error3:
+
+ if (IS_PF(sc)) {
+ bnx2x_int_disable_sync(sc, 1);
+
+/* clean out queued objects */
+ bnx2x_squeeze_objects(sc);
+ }
+
+bnx2x_nic_load_error2:
+
+ if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+ bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+ bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ }
+
+ sc->port.pmf = 0;
+
+bnx2x_nic_load_error1:
+
+ /* clear pf_load status, as it was already set */
+ if (IS_PF(sc)) {
+ bnx2x_clear_pf_load(sc);
+ }
+
+bnx2x_nic_load_error0:
+
+ bnx2x_free_fw_stats_mem(sc);
+ bnx2x_free_mem(sc);
+
+ return rc;
+}
+
+/*
+* Handles controller initialization.
+*/
+int bnx2x_init(struct bnx2x_softc *sc)
+{
+ int other_engine = SC_PATH(sc) ? 0 : 1;
+ uint8_t other_load_status, load_status;
+ uint8_t global = FALSE;
+ int rc;
+
+ /* Check if the driver is still running and bail out if it is. */
+ if (sc->link_vars.link_up) {
+ PMD_DRV_LOG(DEBUG, "Init called while driver is running!");
+ rc = 0;
+ goto bnx2x_init_done;
+ }
+
+ bnx2x_set_power_state(sc, PCI_PM_D0);
+
+ /*
+ * If parity occurred during the unload, then attentions and/or
+ * RECOVERY_IN_PROGRESS may still be set. If so we want the first function
+ * loaded on the current engine to complete the recovery. Parity recovery
+ * is only relevant for PF driver.
+ */
+ if (IS_PF(sc)) {
+ other_load_status = bnx2x_get_load_status(sc, other_engine);
+ load_status = bnx2x_get_load_status(sc, SC_PATH(sc));
+
+ if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
+ bnx2x_chk_parity_attn(sc, &global, TRUE)) {
+ do {
+ /*
+ * If there are attentions and they are in global blocks, set
+ * the GLOBAL_RESET bit regardless whether it will be this
+ * function that will complete the recovery or not.
+ */
+ if (global) {
+ bnx2x_set_reset_global(sc);
+ }
+
+ /*
+ * Only the first function on the current engine should try
+ * to recover in open. In case of attentions in global blocks
+ * only the first in the chip should try to recover.
+ */
+ if ((!load_status
+ && (!global ||!other_load_status))
+ && bnx2x_trylock_leader_lock(sc)
+ && !bnx2x_leader_reset(sc)) {
+ PMD_DRV_LOG(INFO,
+ "Recovered during init");
+ break;
+ }
+
+ /* recovery has failed... */
+ bnx2x_set_power_state(sc, PCI_PM_D3hot);
+
+ sc->recovery_state = BNX2X_RECOVERY_FAILED;
+
+ PMD_DRV_LOG(NOTICE,
+ "Recovery flow hasn't properly "
+ "completed yet, try again later. "
+ "If you still see this message after a "
+ "few retries then power cycle is required.");
+
+ rc = -ENXIO;
+ goto bnx2x_init_done;
+ } while (0);
+ }
+ }
+
+ sc->recovery_state = BNX2X_RECOVERY_DONE;
+
+ rc = bnx2x_nic_load(sc);
+
+bnx2x_init_done:
+
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "Initialization failed, "
+ "stack notified driver is NOT running!");
+ }
+
+ return rc;
+}
+
+static void bnx2x_get_function_num(struct bnx2x_softc *sc)
+{
+ uint32_t val = 0;
+
+ /*
+ * Read the ME register to get the function number. The ME register
+ * holds the relative-function number and absolute-function number. The
+ * absolute-function number appears only in E2 and above. Before that
+ * these bits always contained zero, therefore we cannot blindly use them.
+ */
+
+ val = REG_RD(sc, BAR_ME_REGISTER);
+
+ sc->pfunc_rel =
+ (uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
+ sc->path_id =
+ (uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
+ 1;
+
+ if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
+ sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
+ } else {
+ sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
+ }
+
+ PMD_DRV_LOG(DEBUG,
+ "Relative function %d, Absolute function %d, Path %d",
+ sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
+}
+
+static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
+{
+ uint32_t shmem2_size;
+ uint32_t offset;
+ uint32_t mf_cfg_offset_value;
+
+ /* Non 57712 */
+ offset = (SHMEM_ADDR(sc, func_mb) +
+ (MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
+
+ /* 57712 plus */
+ if (sc->devinfo.shmem2_base != 0) {
+ shmem2_size = SHMEM2_RD(sc, size);
+ if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
+ mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
+ if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
+ offset = mf_cfg_offset_value;
+ }
+ }
+ }
+
+ return offset;
+}
+
+static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
+{
+ uint32_t ret;
+ struct bnx2x_pci_cap *caps;
+
+ /* ensure PCIe capability is enabled */
+ caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
+ if (NULL != caps) {
+ PMD_DRV_LOG(DEBUG, "Found PCIe capability: "
+ "id=0x%04X type=0x%04X addr=0x%08X",
+ caps->id, caps->type, caps->addr);
+ pci_read(sc, (caps->addr + reg), &ret, 2);
+ return ret;
+ }
+
+ PMD_DRV_LOG(WARN, "PCIe capability NOT FOUND!!!");
+
+ return 0;
+}
+
+static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
+{
+ return (bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
+ PCIM_EXP_STA_TRANSACTION_PND);
+}
+
+/*
+* Walk the PCI capabiites list for the device to find what features are
+* supported. These capabilites may be enabled/disabled by firmware so it's
+* best to walk the list rather than make assumptions.
+*/
+static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ struct bnx2x_pci_cap *caps;
+ uint16_t link_status;
+#ifdef RTE_LIBRTE_BNX2X_DEBUG
+ int reg = 0;
+#endif
+
+ /* check if PCI Power Management is enabled */
+ caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
+ if (NULL != caps) {
+ PMD_DRV_LOG(DEBUG, "Found PM capability: "
+ "id=0x%04X type=0x%04X addr=0x%08X",
+ caps->id, caps->type, caps->addr);
+
+ sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
+ sc->devinfo.pcie_pm_cap_reg = caps->addr;
+ }
+
+ link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);
+
+ sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
+ sc->devinfo.pcie_link_width =
+ ((link_status & PCIM_LINK_STA_WIDTH) >> 4);
+
+ PMD_DRV_LOG(DEBUG, "PCIe link speed=%d width=%d",
+ sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
+
+ sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;
+
+ /* check if MSI capability is enabled */
+ caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
+ if (NULL != caps) {
+ PMD_DRV_LOG(DEBUG, "Found MSI capability at 0x%04x", reg);
+
+ sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
+ sc->devinfo.pcie_msi_cap_reg = caps->addr;
+ }
+
+ /* check if MSI-X capability is enabled */
+ caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
+ if (NULL != caps) {
+ PMD_DRV_LOG(DEBUG, "Found MSI-X capability at 0x%04x", reg);
+
+ sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
+ sc->devinfo.pcie_msix_cap_reg = caps->addr;
+ }
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
+{
+ struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+ uint32_t val;
+
+ /* get the outer vlan if we're in switch-dependent mode */
+
+ val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+ mf_info->ext_id = (uint16_t) val;
+
+ mf_info->multi_vnics_mode = 1;
+
+ if (!VALID_OVLAN(mf_info->ext_id)) {
+ PMD_DRV_LOG(NOTICE, "Invalid VLAN (%d)", mf_info->ext_id);
+ return 1;
+ }
+
+ /* get the capabilities */
+ if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
+ FUNC_MF_CFG_PROTOCOL_ISCSI) {
+ mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
+ } else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
+ == FUNC_MF_CFG_PROTOCOL_FCOE) {
+ mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
+ } else {
+ mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
+ }
+
+ mf_info->vnics_per_port =
+ (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+ return 0;
+}
+
+static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
+{
+ uint32_t retval = 0;
+ uint32_t val;
+
+ val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
+
+ if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
+ if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
+ retval |= MF_PROTO_SUPPORT_ETHERNET;
+ }
+ if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
+ retval |= MF_PROTO_SUPPORT_ISCSI;
+ }
+ if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
+ retval |= MF_PROTO_SUPPORT_FCOE;
+ }
+ }
+
+ return retval;
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
+{
+ struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+ uint32_t val;
+
+ /*
+ * There is no outer vlan if we're in switch-independent mode.
+ * If the mac is valid then assume multi-function.
+ */
+
+ val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
+
+ mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
+
+ mf_info->mf_protos_supported =
+ bnx2x_get_shmem_ext_proto_support_flags(sc);
+
+ mf_info->vnics_per_port =
+ (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+ return 0;
+}
+
+static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
+{
+ struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+ uint32_t e1hov_tag;
+ uint32_t func_config;
+ uint32_t niv_config;
+
+ mf_info->multi_vnics_mode = 1;
+
+ e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+ func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
+ niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
+
+ mf_info->ext_id =
+ (uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
+ FUNC_MF_CFG_E1HOV_TAG_SHIFT);
+
+ mf_info->default_vlan =
+ (uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
+ FUNC_MF_CFG_AFEX_VLAN_SHIFT);
+
+ mf_info->niv_allowed_priorities =
+ (uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
+ FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
+
+ mf_info->niv_default_cos =
+ (uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
+ FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
+
+ mf_info->afex_vlan_mode =
+ ((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
+ FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
+
+ mf_info->niv_mba_enabled =
+ ((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
+ FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
+
+ mf_info->mf_protos_supported =
+ bnx2x_get_shmem_ext_proto_support_flags(sc);
+
+ mf_info->vnics_per_port =
+ (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
+
+ return 0;
+}
+
+static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
+{
+ struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+ uint32_t mf_cfg1;
+ uint32_t mf_cfg2;
+ uint32_t ovlan1;
+ uint32_t ovlan2;
+ uint8_t i, j;
+
+ /* various MF mode sanity checks... */
+
+ if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
+ PMD_DRV_LOG(NOTICE,
+ "Enumerated function %d is marked as hidden",
+ SC_PORT(sc));
+ return 1;
+ }
+
+ if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
+ PMD_DRV_LOG(NOTICE, "vnics_per_port=%d multi_vnics_mode=%d",
+ mf_info->vnics_per_port, mf_info->multi_vnics_mode);
+ return 1;
+ }
+
+ if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
+/* vnic id > 0 must have valid ovlan in switch-dependent mode */
+ if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
+ PMD_DRV_LOG(NOTICE, "mf_mode=SD vnic_id=%d ovlan=%d",
+ SC_VN(sc), OVLAN(sc));
+ return 1;
+ }
+
+ if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
+ PMD_DRV_LOG(NOTICE,
+ "mf_mode=SD multi_vnics_mode=%d ovlan=%d",
+ mf_info->multi_vnics_mode, OVLAN(sc));
+ return 1;
+ }
+
+/*
+ * Verify all functions are either MF or SF mode. If MF, make sure
+ * sure that all non-hidden functions have a valid ovlan. If SF,
+ * make sure that all non-hidden functions have an invalid ovlan.
+ */
+ FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+ mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
+ ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
+ if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
+ (((mf_info->multi_vnics_mode)
+ && !VALID_OVLAN(ovlan1))
+ || ((!mf_info->multi_vnics_mode)
+ && VALID_OVLAN(ovlan1)))) {
+ PMD_DRV_LOG(NOTICE,
+ "mf_mode=SD function %d MF config "
+ "mismatch, multi_vnics_mode=%d ovlan=%d",
+ i, mf_info->multi_vnics_mode,
+ ovlan1);
+ return 1;
+ }
+ }
+
+/* Verify all funcs on the same port each have a different ovlan. */
+ FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+ mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
+ ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
+ /* iterate from the next function on the port to the max func */
+ for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
+ mf_cfg2 =
+ MFCFG_RD(sc, func_mf_config[j].config);
+ ovlan2 =
+ MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
+ if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
+ && VALID_OVLAN(ovlan1)
+ && !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
+ && VALID_OVLAN(ovlan2)
+ && (ovlan1 == ovlan2)) {
+ PMD_DRV_LOG(NOTICE,
+ "mf_mode=SD functions %d and %d "
+ "have the same ovlan (%d)",
+ i, j, ovlan1);
+ return 1;
+ }
+ }
+ }
+ }
+ /* MULTI_FUNCTION_SD */
+ return 0;
+}
+
+static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
+{
+ struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
+ uint32_t val, mac_upper;
+ uint8_t i, vnic;
+
+ /* initialize mf_info defaults */
+ mf_info->vnics_per_port = 1;
+ mf_info->multi_vnics_mode = FALSE;
+ mf_info->path_has_ovlan = FALSE;
+ mf_info->mf_mode = SINGLE_FUNCTION;
+
+ if (!CHIP_IS_MF_CAP(sc)) {
+ return 0;
+ }
+
+ if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
+ PMD_DRV_LOG(NOTICE, "Invalid mf_cfg_base!");
+ return 1;
+ }
+
+ /* get the MF mode (switch dependent / independent / single-function) */
+
+ val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
+
+ switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
+
+ mac_upper =
+ MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+
+ /* check for legal upper mac bytes */
+ if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
+ mf_info->mf_mode = MULTI_FUNCTION_SI;
+ } else {
+ PMD_DRV_LOG(NOTICE,
+ "Invalid config for Switch Independent mode");
+ }
+
+ break;
+
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
+
+ /* get outer vlan configuration */
+ val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
+
+ if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
+ FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+ mf_info->mf_mode = MULTI_FUNCTION_SD;
+ } else {
+ PMD_DRV_LOG(NOTICE,
+ "Invalid config for Switch Dependent mode");
+ }
+
+ break;
+
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
+
+ /* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
+ return 0;
+
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
+
+ /*
+ * Mark MF mode as NIV if MCP version includes NPAR-SD support
+ * and the MAC address is valid.
+ */
+ mac_upper =
+ MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+
+ if ((SHMEM2_HAS(sc, afex_driver_support)) &&
+ (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
+ mf_info->mf_mode = MULTI_FUNCTION_AFEX;
+ } else {
+ PMD_DRV_LOG(NOTICE, "Invalid config for AFEX mode");
+ }
+
+ break;
+
+ default:
+
+ PMD_DRV_LOG(NOTICE, "Unknown MF mode (0x%08x)",
+ (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
+
+ return 1;
+ }
+
+ /* set path mf_mode (which could be different than function mf_mode) */
+ if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
+ mf_info->path_has_ovlan = TRUE;
+ } else if (mf_info->mf_mode == SINGLE_FUNCTION) {
+/*
+ * Decide on path multi vnics mode. If we're not in MF mode and in
+ * 4-port mode, this is good enough to check vnic-0 of the other port
+ * on the same path
+ */
+ if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
+ uint8_t other_port = !(PORT_ID(sc) & 1);
+ uint8_t abs_func_other_port =
+ (SC_PATH(sc) + (2 * other_port));
+
+ val =
+ MFCFG_RD(sc,
+ func_mf_config
+ [abs_func_other_port].e1hov_tag);
+
+ mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
+ }
+ }
+
+ if (mf_info->mf_mode == SINGLE_FUNCTION) {
+/* invalid MF config */
+ if (SC_VN(sc) >= 1) {
+ PMD_DRV_LOG(NOTICE, "VNIC ID >= 1 in SF mode");
+ return 1;
+ }
+
+ return 0;
+ }
+
+ /* get the MF configuration */
+ mf_info->mf_config[SC_VN(sc)] =
+ MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
+
+ switch (mf_info->mf_mode) {
+ case MULTI_FUNCTION_SD:
+
+ bnx2x_get_shmem_mf_cfg_info_sd(sc);
+ break;
+
+ case MULTI_FUNCTION_SI:
+
+ bnx2x_get_shmem_mf_cfg_info_si(sc);
+ break;
+
+ case MULTI_FUNCTION_AFEX:
+
+ bnx2x_get_shmem_mf_cfg_info_niv(sc);
+ break;
+
+ default:
+
+ PMD_DRV_LOG(NOTICE, "Get MF config failed (mf_mode=0x%08x)",
+ mf_info->mf_mode);
+ return 1;
+ }
+
+ /* get the congestion management parameters */
+
+ vnic = 0;
+ FOREACH_ABS_FUNC_IN_PORT(sc, i) {
+/* get min/max bw */
+ val = MFCFG_RD(sc, func_mf_config[i].config);
+ mf_info->min_bw[vnic] =
+ ((val & FUNC_MF_CFG_MIN_BW_MASK) >>
+ FUNC_MF_CFG_MIN_BW_SHIFT);
+ mf_info->max_bw[vnic] =
+ ((val & FUNC_MF_CFG_MAX_BW_MASK) >>
+ FUNC_MF_CFG_MAX_BW_SHIFT);
+ vnic++;
+ }
+
+ return bnx2x_check_valid_mf_cfg(sc);
+}
+
+static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
+{
+ int port;
+ uint32_t mac_hi, mac_lo, val;
+
+ PMD_INIT_FUNC_TRACE();
+
+ port = SC_PORT(sc);
+ mac_hi = mac_lo = 0;
+
+ sc->link_params.sc = sc;
+ sc->link_params.port = port;
+
+ /* get the hardware config info */
+ sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
+ sc->devinfo.hw_config2 =
+ SHMEM_RD(sc, dev_info.shared_hw_config.config2);
+
+ sc->link_params.hw_led_mode =
+ ((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
+ SHARED_HW_CFG_LED_MODE_SHIFT);
+
+ /* get the port feature config */
+ sc->port.config =
+ SHMEM_RD(sc, dev_info.port_feature_config[port].config);
+
+ /* get the link params */
+ sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
+ & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
+ sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
+ & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
+
+ /* get the lane config */
+ sc->link_params.lane_config =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
+
+ /* get the link config */
+ val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
+ sc->port.link_config[ELINK_INT_PHY] = val;
+ sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
+ sc->port.link_config[ELINK_EXT_PHY1] =
+ SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
+
+ /* get the override preemphasis flag and enable it or turn it off */
+ val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
+ if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
+ sc->link_params.feature_config_flags |=
+ ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+ } else {
+ sc->link_params.feature_config_flags &=
+ ~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+ }
+
+ /* get the initial value of the link params */
+ sc->link_params.multi_phy_config =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
+
+ /* get external phy info */
+ sc->port.ext_phy_config =
+ SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
+
+ /* get the multifunction configuration */
+ bnx2x_get_mf_cfg_info(sc);
+
+ /* get the mac address */
+ if (IS_MF(sc)) {
+ mac_hi =
+ MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
+ mac_lo =
+ MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
+ } else {
+ mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
+ mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
+ }
+
+ if ((mac_lo == 0) && (mac_hi == 0)) {
+ *sc->mac_addr_str = 0;
+ PMD_DRV_LOG(NOTICE, "No Ethernet address programmed!");
+ } else {
+ sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
+ sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
+ sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
+ sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
+ sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
+ sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
+ snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
+ "%02x:%02x:%02x:%02x:%02x:%02x",
+ sc->link_params.mac_addr[0],
+ sc->link_params.mac_addr[1],
+ sc->link_params.mac_addr[2],
+ sc->link_params.mac_addr[3],
+ sc->link_params.mac_addr[4],
+ sc->link_params.mac_addr[5]);
+ PMD_DRV_LOG(DEBUG, "Ethernet address: %s", sc->mac_addr_str);
+ }
+
+ return 0;
+}
+
+static void bnx2x_media_detect(struct bnx2x_softc *sc)
+{
+ uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
+ switch (sc->link_params.phy[phy_idx].media_type) {
+ case ELINK_ETH_PHY_SFPP_10G_FIBER:
+ case ELINK_ETH_PHY_SFP_1G_FIBER:
+ case ELINK_ETH_PHY_XFP_FIBER:
+ case ELINK_ETH_PHY_KR:
+ case ELINK_ETH_PHY_CX4:
+ PMD_DRV_LOG(INFO, "Found 10GBase-CX4 media.");
+ sc->media = IFM_10G_CX4;
+ break;
+ case ELINK_ETH_PHY_DA_TWINAX:
+ PMD_DRV_LOG(INFO, "Found 10Gb Twinax media.");
+ sc->media = IFM_10G_TWINAX;
+ break;
+ case ELINK_ETH_PHY_BASE_T:
+ PMD_DRV_LOG(INFO, "Found 10GBase-T media.");
+ sc->media = IFM_10G_T;
+ break;
+ case ELINK_ETH_PHY_NOT_PRESENT:
+ PMD_DRV_LOG(INFO, "Media not present.");
+ sc->media = 0;
+ break;
+ case ELINK_ETH_PHY_UNSPECIFIED:
+ default:
+ PMD_DRV_LOG(INFO, "Unknown media!");
+ sc->media = 0;
+ break;
+ }
+}
+
+#define GET_FIELD(value, fname) \
+(((value) & (fname##_MASK)) >> (fname##_SHIFT))
+#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
+#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
+
+static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
+{
+ int pfid = SC_FUNC(sc);
+ int igu_sb_id;
+ uint32_t val;
+ uint8_t fid, igu_sb_cnt = 0;
+
+ sc->igu_base_sb = 0xff;
+
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ int vn = SC_VN(sc);
+ igu_sb_cnt = sc->igu_sb_cnt;
+ sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
+ FP_SB_MAX_E1x);
+ sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
+ (CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
+ return 0;
+ }
+
+ /* IGU in normal mode - read CAM */
+ for (igu_sb_id = 0;
+ igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
+ val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
+ if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
+ continue;
+ }
+ fid = IGU_FID(val);
+ if ((fid & IGU_FID_ENCODE_IS_PF)) {
+ if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
+ continue;
+ }
+ if (IGU_VEC(val) == 0) {
+ /* default status block */
+ sc->igu_dsb_id = igu_sb_id;
+ } else {
+ if (sc->igu_base_sb == 0xff) {
+ sc->igu_base_sb = igu_sb_id;
+ }
+ igu_sb_cnt++;
+ }
+ }
+ }
+
+ /*
+ * Due to new PF resource allocation by MFW T7.4 and above, it's optional
+ * that number of CAM entries will not be equal to the value advertised in
+ * PCI. Driver should use the minimal value of both as the actual status
+ * block count
+ */
+ sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
+
+ if (igu_sb_cnt == 0) {
+ PMD_DRV_LOG(ERR, "CAM configuration error");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+* Gather various information from the device config space, the device itself,
+* shmem, and the user input.
+*/
+static int bnx2x_get_device_info(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+ int rc;
+
+ /* get the chip revision (chip metal comes from pci config space) */
+ sc->devinfo.chip_id = sc->link_params.chip_id =
+ (((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
+ ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
+ (((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
+ ((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
+
+ /* force 57811 according to MISC register */
+ if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
+ if (CHIP_IS_57810(sc)) {
+ sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
+ (sc->
+ devinfo.chip_id & 0x0000ffff));
+ } else if (CHIP_IS_57810_MF(sc)) {
+ sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
+ (sc->
+ devinfo.chip_id & 0x0000ffff));
+ }
+ sc->devinfo.chip_id |= 0x1;
+ }
+
+ PMD_DRV_LOG(DEBUG,
+ "chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
+ sc->devinfo.chip_id,
+ ((sc->devinfo.chip_id >> 16) & 0xffff),
+ ((sc->devinfo.chip_id >> 12) & 0xf),
+ ((sc->devinfo.chip_id >> 4) & 0xff),
+ ((sc->devinfo.chip_id >> 0) & 0xf));
+
+ val = (REG_RD(sc, 0x2874) & 0x55);
+ if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
+ sc->flags |= BNX2X_ONE_PORT_FLAG;
+ PMD_DRV_LOG(DEBUG, "single port device");
+ }
+
+ /* set the doorbell size */
+ sc->doorbell_size = (1 << BNX2X_DB_SHIFT);
+
+ /* determine whether the device is in 2 port or 4 port mode */
+ sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE; /* E1h */
+ if (CHIP_IS_E2E3(sc)) {
+/*
+ * Read port4mode_en_ovwr[0]:
+ * If 1, four port mode is in port4mode_en_ovwr[1].
+ * If 0, four port mode is in port4mode_en[0].
+ */
+ val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
+ if (val & 1) {
+ val = ((val >> 1) & 1);
+ } else {
+ val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
+ }
+
+ sc->devinfo.chip_port_mode =
+ (val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
+
+ PMD_DRV_LOG(DEBUG, "Port mode = %s", (val) ? "4" : "2");
+ }
+
+ /* get the function and path info for the device */
+ bnx2x_get_function_num(sc);
+
+ /* get the shared memory base address */
+ sc->devinfo.shmem_base =
+ sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
+ sc->devinfo.shmem2_base =
+ REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
+ MISC_REG_GENERIC_CR_0));
+
+ if (!sc->devinfo.shmem_base) {
+/* this should ONLY prevent upcoming shmem reads */
+ PMD_DRV_LOG(INFO, "MCP not active");
+ sc->flags |= BNX2X_NO_MCP_FLAG;
+ return 0;
+ }
+
+ /* make sure the shared memory contents are valid */
+ val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
+ if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
+ (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
+ PMD_DRV_LOG(NOTICE, "Invalid SHMEM validity signature: 0x%08x",
+ val);
+ return 0;
+ }
+
+ /* get the bootcode version */
+ sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
+ snprintf(sc->devinfo.bc_ver_str,
+ sizeof(sc->devinfo.bc_ver_str),
+ "%d.%d.%d",
+ ((sc->devinfo.bc_ver >> 24) & 0xff),
+ ((sc->devinfo.bc_ver >> 16) & 0xff),
+ ((sc->devinfo.bc_ver >> 8) & 0xff));
+ PMD_DRV_LOG(INFO, "Bootcode version: %s", sc->devinfo.bc_ver_str);
+
+ /* get the bootcode shmem address */
+ sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);
+
+ /* clean indirect addresses as they're not used */
+ pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
+ if (IS_PF(sc)) {
+ REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
+ if (CHIP_IS_E1x(sc)) {
+ REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
+ REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
+ }
+
+/*
+ * Enable internal target-read (in case we are probed after PF
+ * FLR). Must be done prior to any BAR read access. Only for
+ * 57712 and up
+ */
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
+ 1);
+ }
+ }
+
+ /* get the nvram size */
+ val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
+ sc->devinfo.flash_size =
+ (NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
+
+ bnx2x_set_power_state(sc, PCI_PM_D0);
+ /* get various configuration parameters from shmem */
+ bnx2x_get_shmem_info(sc);
+
+ /* initialize IGU parameters */
+ if (CHIP_IS_E1x(sc)) {
+ sc->devinfo.int_block = INT_BLOCK_HC;
+ sc->igu_dsb_id = DEF_SB_IGU_ID;
+ sc->igu_base_sb = 0;
+ } else {
+ sc->devinfo.int_block = INT_BLOCK_IGU;
+
+/* do not allow device reset during IGU info preocessing */
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+ val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
+
+ if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+ int tout = 5000;
+
+ val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
+ REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
+ REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
+
+ while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
+ tout--;
+ DELAY(1000);
+ }
+
+ if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
+ PMD_DRV_LOG(NOTICE,
+ "FORCING IGU Normal Mode failed!!!");
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+ return -1;
+ }
+ }
+
+ if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
+ PMD_DRV_LOG(DEBUG, "IGU Backward Compatible Mode");
+ sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
+ } else {
+ PMD_DRV_LOG(DEBUG, "IGU Normal Mode");
+ }
+
+ rc = bnx2x_get_igu_cam_info(sc);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+ if (rc) {
+ return rc;
+ }
+ }
+
+ /*
+ * Get base FW non-default (fast path) status block ID. This value is
+ * used to initialize the fw_sb_id saved on the fp/queue structure to
+ * determine the id used by the FW.
+ */
+ if (CHIP_IS_E1x(sc)) {
+ sc->base_fw_ndsb =
+ ((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
+ } else {
+/*
+ * 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
+ * the same queue are indicated on the same IGU SB). So we prefer
+ * FW and IGU SBs to be the same value.
+ */
+ sc->base_fw_ndsb = sc->igu_base_sb;
+ }
+
+ elink_phy_probe(&sc->link_params);
+
+ return 0;
+}
+
+static void
+bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
+{
+ uint32_t cfg_size = 0;
+ uint32_t idx;
+ uint8_t port = SC_PORT(sc);
+
+ /* aggregation of supported attributes of all external phys */
+ sc->port.supported[0] = 0;
+ sc->port.supported[1] = 0;
+
+ switch (sc->link_params.num_phys) {
+ case 1:
+ sc->port.supported[0] =
+ sc->link_params.phy[ELINK_INT_PHY].supported;
+ cfg_size = 1;
+ break;
+ case 2:
+ sc->port.supported[0] =
+ sc->link_params.phy[ELINK_EXT_PHY1].supported;
+ cfg_size = 1;
+ break;
+ case 3:
+ if (sc->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+ sc->port.supported[1] =
+ sc->link_params.phy[ELINK_EXT_PHY1].supported;
+ sc->port.supported[0] =
+ sc->link_params.phy[ELINK_EXT_PHY2].supported;
+ } else {
+ sc->port.supported[0] =
+ sc->link_params.phy[ELINK_EXT_PHY1].supported;
+ sc->port.supported[1] =
+ sc->link_params.phy[ELINK_EXT_PHY2].supported;
+ }
+ cfg_size = 2;
+ break;
+ }
+
+ if (!(sc->port.supported[0] || sc->port.supported[1])) {
+ PMD_DRV_LOG(ERR,
+ "Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
+ SHMEM_RD(sc,
+ dev_info.port_hw_config
+ [port].external_phy_config),
+ SHMEM_RD(sc,
+ dev_info.port_hw_config
+ [port].external_phy_config2));
+ return;
+ }
+
+ if (CHIP_IS_E3(sc))
+ sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
+ else {
+ switch (switch_cfg) {
+ case ELINK_SWITCH_CFG_1G:
+ sc->port.phy_addr =
+ REG_RD(sc,
+ NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
+ break;
+ case ELINK_SWITCH_CFG_10G:
+ sc->port.phy_addr =
+ REG_RD(sc,
+ NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
+ break;
+ default:
+ PMD_DRV_LOG(ERR,
+ "Invalid switch config in"
+ "link_config=0x%08x",
+ sc->port.link_config[0]);
+ return;
+ }
+ }
+
+ PMD_DRV_LOG(INFO, "PHY addr 0x%08x", sc->port.phy_addr);
+
+ /* mask what we support according to speed_cap_mask per configuration */
+ for (idx = 0; idx < cfg_size; idx++) {
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_10baseT_Half;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_10baseT_Full;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_100baseT_Half;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_100baseT_Full;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_1000baseT_Full;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_2500baseX_Full;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_10000baseT_Full;
+ }
+
+ if (!(sc->link_params.speed_cap_mask[idx] &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
+ sc->port.supported[idx] &=
+ ~ELINK_SUPPORTED_20000baseKR2_Full;
+ }
+ }
+
+ PMD_DRV_LOG(INFO, "PHY supported 0=0x%08x 1=0x%08x",
+ sc->port.supported[0], sc->port.supported[1]);
+}
+
+static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
+{
+ uint32_t link_config;
+ uint32_t idx;
+ uint32_t cfg_size = 0;
+
+ sc->port.advertising[0] = 0;
+ sc->port.advertising[1] = 0;
+
+ switch (sc->link_params.num_phys) {
+ case 1:
+ case 2:
+ cfg_size = 1;
+ break;
+ case 3:
+ cfg_size = 2;
+ break;
+ }
+
+ for (idx = 0; idx < cfg_size; idx++) {
+ sc->link_params.req_duplex[idx] = DUPLEX_FULL;
+ link_config = sc->port.link_config[idx];
+
+ switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
+ case PORT_FEATURE_LINK_SPEED_AUTO:
+ if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_AUTO_NEG;
+ sc->port.advertising[idx] |=
+ sc->port.supported[idx];
+ if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
+ sc->port.advertising[idx] |=
+ (ELINK_SUPPORTED_100baseT_Half |
+ ELINK_SUPPORTED_100baseT_Full);
+ } else {
+ /* force 10G, no AN */
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_10000;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_10000baseT_Full |
+ ADVERTISED_FIBRE);
+ continue;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_10M_FULL:
+ if (sc->
+ port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
+ {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_10;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_10baseT_Full | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_10M_HALF:
+ if (sc->
+ port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
+ {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_10;
+ sc->link_params.req_duplex[idx] = DUPLEX_HALF;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_10baseT_Half | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_100M_FULL:
+ if (sc->
+ port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
+ {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_100;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_100baseT_Full | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_100M_HALF:
+ if (sc->
+ port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
+ {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_100;
+ sc->link_params.req_duplex[idx] = DUPLEX_HALF;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_100baseT_Half | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_1G:
+ if (sc->port.supported[idx] &
+ ELINK_SUPPORTED_1000baseT_Full) {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_1000;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_1000baseT_Full | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_2_5G:
+ if (sc->port.supported[idx] &
+ ELINK_SUPPORTED_2500baseX_Full) {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_2500;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_2500baseX_Full | ADVERTISED_TP);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_10G_CX4:
+ if (sc->port.supported[idx] &
+ ELINK_SUPPORTED_10000baseT_Full) {
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_10000;
+ sc->port.advertising[idx] |=
+ (ADVERTISED_10000baseT_Full |
+ ADVERTISED_FIBRE);
+ } else {
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x",
+ link_config,
+ sc->
+ link_params.speed_cap_mask[idx]);
+ return;
+ }
+ break;
+
+ case PORT_FEATURE_LINK_SPEED_20G:
+ sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
+ break;
+
+ default:
+ PMD_DRV_LOG(ERR,
+ "Invalid NVRAM config link_config=0x%08x "
+ "speed_cap_mask=0x%08x", link_config,
+ sc->link_params.speed_cap_mask[idx]);
+ sc->link_params.req_line_speed[idx] =
+ ELINK_SPEED_AUTO_NEG;
+ sc->port.advertising[idx] = sc->port.supported[idx];
+ break;
+ }
+
+ sc->link_params.req_flow_ctrl[idx] =
+ (link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
+
+ if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
+ if (!
+ (sc->
+ port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
+ sc->link_params.req_flow_ctrl[idx] =
+ ELINK_FLOW_CTRL_NONE;
+ } else {
+ bnx2x_set_requested_fc(sc);
+ }
+ }
+ }
+}
+
+static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
+{
+ uint8_t port = SC_PORT(sc);
+ uint32_t eee_mode;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* shmem data already read in bnx2x_get_shmem_info() */
+
+ bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
+ bnx2x_link_settings_requested(sc);
+
+ /* configure link feature according to nvram value */
+ eee_mode =
+ (((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
+ & PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
+ PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
+ if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
+ sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
+ ELINK_EEE_MODE_ENABLE_LPI |
+ ELINK_EEE_MODE_OUTPUT_TIME);
+ } else {
+ sc->link_params.eee_mode = 0;
+ }
+
+ /* get the media type */
+ bnx2x_media_detect(sc);
+}
+
+static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
+{
+ uint32_t flags = MODE_ASIC | MODE_PORT2;
+
+ if (CHIP_IS_E2(sc)) {
+ flags |= MODE_E2;
+ } else if (CHIP_IS_E3(sc)) {
+ flags |= MODE_E3;
+ if (CHIP_REV(sc) == CHIP_REV_Ax) {
+ flags |= MODE_E3_A0;
+ } else { /*if (CHIP_REV(sc) == CHIP_REV_Bx) */
+
+ flags |= MODE_E3_B0 | MODE_COS3;
+ }
+ }
+
+ if (IS_MF(sc)) {
+ flags |= MODE_MF;
+ switch (sc->devinfo.mf_info.mf_mode) {
+ case MULTI_FUNCTION_SD:
+ flags |= MODE_MF_SD;
+ break;
+ case MULTI_FUNCTION_SI:
+ flags |= MODE_MF_SI;
+ break;
+ case MULTI_FUNCTION_AFEX:
+ flags |= MODE_MF_AFEX;
+ break;
+ }
+ } else {
+ flags |= MODE_SF;
+ }
+
+#if defined(__LITTLE_ENDIAN)
+ flags |= MODE_LITTLE_ENDIAN;
+#else /* __BIG_ENDIAN */
+ flags |= MODE_BIG_ENDIAN;
+#endif
+
+ INIT_MODE_FLAGS(sc) = flags;
+}
+
+int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
+{
+ struct bnx2x_fastpath *fp;
+ char buf[32];
+ uint32_t i;
+
+ if (IS_PF(sc)) {
+/************************/
+/* DEFAULT STATUS BLOCK */
+/************************/
+
+ if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
+ &sc->def_sb_dma, "def_sb",
+ RTE_CACHE_LINE_SIZE) != 0) {
+ return -1;
+ }
+
+ sc->def_sb =
+ (struct host_sp_status_block *)sc->def_sb_dma.vaddr;
+/***************/
+/* EVENT QUEUE */
+/***************/
+
+ if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
+ &sc->eq_dma, "ev_queue",
+ RTE_CACHE_LINE_SIZE) != 0) {
+ sc->def_sb = NULL;
+ return -1;
+ }
+
+ sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;
+
+/*************/
+/* SLOW PATH */
+/*************/
+
+ if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
+ &sc->sp_dma, "sp",
+ RTE_CACHE_LINE_SIZE) != 0) {
+ sc->eq = NULL;
+ sc->def_sb = NULL;
+ return -1;
+ }
+
+ sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;
+
+/*******************/
+/* SLOW PATH QUEUE */
+/*******************/
+
+ if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
+ &sc->spq_dma, "sp_queue",
+ RTE_CACHE_LINE_SIZE) != 0) {
+ sc->sp = NULL;
+ sc->eq = NULL;
+ sc->def_sb = NULL;
+ return -1;
+ }
+
+ sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
+
+/***************************/
+/* FW DECOMPRESSION BUFFER */
+/***************************/
+
+ if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
+ "fw_dec_buf", RTE_CACHE_LINE_SIZE) != 0) {
+ sc->spq = NULL;
+ sc->sp = NULL;
+ sc->eq = NULL;
+ sc->def_sb = NULL;
+ return -1;
+ }
+
+ sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
+ }
+
+ /*************/
+ /* FASTPATHS */
+ /*************/
+
+ /* allocate DMA memory for each fastpath structure */
+ for (i = 0; i < sc->num_queues; i++) {
+ fp = &sc->fp[i];
+ fp->sc = sc;
+ fp->index = i;
+
+/*******************/
+/* FP STATUS BLOCK */
+/*******************/
+
+ snprintf(buf, sizeof(buf), "fp_%d_sb", i);
+ if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
+ &fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
+ PMD_DRV_LOG(NOTICE, "Failed to alloc %s", buf);
+ return -1;
+ } else {
+ if (CHIP_IS_E2E3(sc)) {
+ fp->status_block.e2_sb =
+ (struct host_hc_status_block_e2 *)
+ fp->sb_dma.vaddr;
+ } else {
+ fp->status_block.e1x_sb =
+ (struct host_hc_status_block_e1x *)
+ fp->sb_dma.vaddr;
+ }
+ }
+ }
+
+ return 0;
+}
+
+void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
+{
+ struct bnx2x_fastpath *fp;
+ int i;
+
+ for (i = 0; i < sc->num_queues; i++) {
+ fp = &sc->fp[i];
+
+/*******************/
+/* FP STATUS BLOCK */
+/*******************/
+
+ memset(&fp->status_block, 0, sizeof(fp->status_block));
+ }
+
+ /***************************/
+ /* FW DECOMPRESSION BUFFER */
+ /***************************/
+
+ sc->gz_buf = NULL;
+
+ /*******************/
+ /* SLOW PATH QUEUE */
+ /*******************/
+
+ sc->spq = NULL;
+
+ /*************/
+ /* SLOW PATH */
+ /*************/
+
+ sc->sp = NULL;
+
+ /***************/
+ /* EVENT QUEUE */
+ /***************/
+
+ sc->eq = NULL;
+
+ /************************/
+ /* DEFAULT STATUS BLOCK */
+ /************************/
+
+ sc->def_sb = NULL;
+
+}
+
+/*
+* Previous driver DMAE transaction may have occurred when pre-boot stage
+* ended and boot began. This would invalidate the addresses of the
+* transaction, resulting in was-error bit set in the PCI causing all
+* hw-to-host PCIe transactions to timeout. If this happened we want to clear
+* the interrupt which detected this from the pglueb and the was-done bit
+*/
+static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+
+ if (!CHIP_IS_E1x(sc)) {
+ val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
+ REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+ 1 << SC_FUNC(sc));
+ }
+ }
+}
+
+static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
+{
+ uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
+ DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
+ if (!rc) {
+ PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
+ return -1;
+ }
+
+ return 0;
+}
+
+static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
+{
+ struct bnx2x_prev_list_node *tmp;
+
+ LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
+ if ((sc->pcie_bus == tmp->bus) &&
+ (sc->pcie_device == tmp->slot) &&
+ (SC_PATH(sc) == tmp->path)) {
+ return tmp;
+ }
+ }
+
+ return NULL;
+}
+
+static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
+{
+ struct bnx2x_prev_list_node *tmp;
+ int rc = FALSE;
+
+ rte_spinlock_lock(&bnx2x_prev_mtx);
+
+ tmp = bnx2x_prev_path_get_entry(sc);
+ if (tmp) {
+ if (tmp->aer) {
+ PMD_DRV_LOG(DEBUG,
+ "Path %d/%d/%d was marked by AER",
+ sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+ } else {
+ rc = TRUE;
+ PMD_DRV_LOG(DEBUG,
+ "Path %d/%d/%d was already cleaned from previous drivers",
+ sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+ }
+ }
+
+ rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+ return rc;
+}
+
+static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
+{
+ struct bnx2x_prev_list_node *tmp;
+
+ rte_spinlock_lock(&bnx2x_prev_mtx);
+
+ /* Check whether the entry for this path already exists */
+ tmp = bnx2x_prev_path_get_entry(sc);
+ if (tmp) {
+ if (!tmp->aer) {
+ PMD_DRV_LOG(DEBUG,
+ "Re-marking AER in path %d/%d/%d",
+ sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+ } else {
+ PMD_DRV_LOG(DEBUG,
+ "Removing AER indication from path %d/%d/%d",
+ sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
+ tmp->aer = 0;
+ }
+
+ rte_spinlock_unlock(&bnx2x_prev_mtx);
+ return 0;
+ }
+
+ rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+ /* Create an entry for this path and add it */
+ tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
+ RTE_CACHE_LINE_SIZE);
+ if (!tmp) {
+ PMD_DRV_LOG(NOTICE, "Failed to allocate 'bnx2x_prev_list_node'");
+ return -1;
+ }
+
+ tmp->bus = sc->pcie_bus;
+ tmp->slot = sc->pcie_device;
+ tmp->path = SC_PATH(sc);
+ tmp->aer = 0;
+ tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
+
+ rte_spinlock_lock(&bnx2x_prev_mtx);
+
+ LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);
+
+ rte_spinlock_unlock(&bnx2x_prev_mtx);
+
+ return 0;
+}
+
+static int bnx2x_do_flr(struct bnx2x_softc *sc)
+{
+ int i;
+
+ /* only E2 and onwards support FLR */
+ if (CHIP_IS_E1x(sc)) {
+ PMD_DRV_LOG(WARN, "FLR not supported in E1H");
+ return -1;
+ }
+
+ /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
+ if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
+ PMD_DRV_LOG(WARN,
+ "FLR not supported by BC_VER: 0x%08x",
+ sc->devinfo.bc_ver);
+ return -1;
+ }
+
+ /* Wait for Transaction Pending bit clean */
+ for (i = 0; i < 4; i++) {
+ if (i) {
+ DELAY(((1 << (i - 1)) * 100) * 1000);
+ }
+
+ if (!bnx2x_is_pcie_pending(sc)) {
+ goto clear;
+ }
+ }
+
+ PMD_DRV_LOG(NOTICE, "PCIE transaction is not cleared, "
+ "proceeding with reset anyway");
+
+clear:
+ bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
+
+ return 0;
+}
+
+struct bnx2x_mac_vals {
+ uint32_t xmac_addr;
+ uint32_t xmac_val;
+ uint32_t emac_addr;
+ uint32_t emac_val;
+ uint32_t umac_addr;
+ uint32_t umac_val;
+ uint32_t bmac_addr;
+ uint32_t bmac_val[2];
+};
+
+static void
+bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
+{
+ uint32_t val, base_addr, offset, mask, reset_reg;
+ uint8_t mac_stopped = FALSE;
+ uint8_t port = SC_PORT(sc);
+ uint32_t wb_data[2];
+
+ /* reset addresses as they also mark which values were changed */
+ vals->bmac_addr = 0;
+ vals->umac_addr = 0;
+ vals->xmac_addr = 0;
+ vals->emac_addr = 0;
+
+ reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
+
+ if (!CHIP_IS_E3(sc)) {
+ val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
+ mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
+ if ((mask & reset_reg) && val) {
+ base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
+ : NIG_REG_INGRESS_BMAC0_MEM;
+ offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
+ : BIGMAC_REGISTER_BMAC_CONTROL;
+
+ /*
+ * use rd/wr since we cannot use dmae. This is safe
+ * since MCP won't access the bus due to the request
+ * to unload, and no function on the path can be
+ * loaded at this time.
+ */
+ wb_data[0] = REG_RD(sc, base_addr + offset);
+ wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
+ vals->bmac_addr = base_addr + offset;
+ vals->bmac_val[0] = wb_data[0];
+ vals->bmac_val[1] = wb_data[1];
+ wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
+ REG_WR(sc, vals->bmac_addr, wb_data[0]);
+ REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
+ }
+
+ vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
+ vals->emac_val = REG_RD(sc, vals->emac_addr);
+ REG_WR(sc, vals->emac_addr, 0);
+ mac_stopped = TRUE;
+ } else {
+ if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
+ base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+ val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
+ REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
+ val & ~(1 << 1));
+ REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
+ val | (1 << 1));
+ vals->xmac_addr = base_addr + XMAC_REG_CTRL;
+ vals->xmac_val = REG_RD(sc, vals->xmac_addr);
+ REG_WR(sc, vals->xmac_addr, 0);
+ mac_stopped = TRUE;
+ }
+
+ mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
+ if (mask & reset_reg) {
+ base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+ vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
+ vals->umac_val = REG_RD(sc, vals->umac_addr);
+ REG_WR(sc, vals->umac_addr, 0);
+ mac_stopped = TRUE;
+ }
+ }
+
+ if (mac_stopped) {
+ DELAY(20000);
+ }
+}
+
+#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
+#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
+#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
+#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
+
+static void
+bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
+{
+ uint16_t rcq, bd;
+ uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));
+
+ rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
+ bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
+
+ tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
+ REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
+}
+
+static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
+{
+ uint32_t reset_reg, tmp_reg = 0, rc;
+ uint8_t prev_undi = FALSE;
+ struct bnx2x_mac_vals mac_vals;
+ uint32_t timer_count = 1000;
+ uint32_t prev_brb;
+
+ /*
+ * It is possible a previous function received 'common' answer,
+ * but hasn't loaded yet, therefore creating a scenario of
+ * multiple functions receiving 'common' on the same path.
+ */
+ memset(&mac_vals, 0, sizeof(mac_vals));
+
+ if (bnx2x_prev_is_path_marked(sc)) {
+ return bnx2x_prev_mcp_done(sc);
+ }
+
+ reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
+
+ /* Reset should be performed after BRB is emptied */
+ if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
+ /* Close the MAC Rx to prevent BRB from filling up */
+ bnx2x_prev_unload_close_mac(sc, &mac_vals);
+
+ /* close LLH filters towards the BRB */
+ elink_set_rx_filter(&sc->link_params, 0);
+
+ /*
+ * Check if the UNDI driver was previously loaded.
+ * UNDI driver initializes CID offset for normal bell to 0x7
+ */
+ if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
+ tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
+ if (tmp_reg == 0x7) {
+ PMD_DRV_LOG(DEBUG, "UNDI previously loaded");
+ prev_undi = TRUE;
+ /* clear the UNDI indication */
+ REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
+ /* clear possible idle check errors */
+ REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
+ }
+ }
+
+ /* wait until BRB is empty */
+ tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
+ while (timer_count) {
+ prev_brb = tmp_reg;
+
+ tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
+ if (!tmp_reg) {
+ break;
+ }
+
+ PMD_DRV_LOG(DEBUG, "BRB still has 0x%08x", tmp_reg);
+
+ /* reset timer as long as BRB actually gets emptied */
+ if (prev_brb > tmp_reg) {
+ timer_count = 1000;
+ } else {
+ timer_count--;
+ }
+
+ /* If UNDI resides in memory, manually increment it */
+ if (prev_undi) {
+ bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
+ }
+
+ DELAY(10);
+ }
+
+ if (!timer_count) {
+ PMD_DRV_LOG(NOTICE, "Failed to empty BRB");
+ }
+ }
+
+ /* No packets are in the pipeline, path is ready for reset */
+ bnx2x_reset_common(sc);
+
+ if (mac_vals.xmac_addr) {
+ REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
+ }
+ if (mac_vals.umac_addr) {
+ REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
+ }
+ if (mac_vals.emac_addr) {
+ REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
+ }
+ if (mac_vals.bmac_addr) {
+ REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
+ REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
+ }
+
+ rc = bnx2x_prev_mark_path(sc, prev_undi);
+ if (rc) {
+ bnx2x_prev_mcp_done(sc);
+ return rc;
+ }
+
+ return bnx2x_prev_mcp_done(sc);
+}
+
+static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
+{
+ int rc;
+
+ /* Test if previous unload process was already finished for this path */
+ if (bnx2x_prev_is_path_marked(sc)) {
+ return bnx2x_prev_mcp_done(sc);
+ }
+
+ /*
+ * If function has FLR capabilities, and existing FW version matches
+ * the one required, then FLR will be sufficient to clean any residue
+ * left by previous driver
+ */
+ rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
+ if (!rc) {
+ /* fw version is good */
+ rc = bnx2x_do_flr(sc);
+ }
+
+ if (!rc) {
+ /* FLR was performed */
+ return 0;
+ }
+
+ PMD_DRV_LOG(INFO, "Could not FLR");
+
+ /* Close the MCP request, return failure */
+ rc = bnx2x_prev_mcp_done(sc);
+ if (!rc) {
+ rc = BNX2X_PREV_WAIT_NEEDED;
+ }
+
+ return rc;
+}
+
+static int bnx2x_prev_unload(struct bnx2x_softc *sc)
+{
+ int time_counter = 10;
+ uint32_t fw, hw_lock_reg, hw_lock_val;
+ uint32_t rc = 0;
+
+ /*
+ * Clear HW from errors which may have resulted from an interrupted
+ * DMAE transaction.
+ */
+ bnx2x_prev_interrupted_dmae(sc);
+
+ /* Release previously held locks */
+ if (SC_FUNC(sc) <= 5)
+ hw_lock_reg = (MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8);
+ else
+ hw_lock_reg =
+ (MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
+
+ hw_lock_val = (REG_RD(sc, hw_lock_reg));
+ if (hw_lock_val) {
+ if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
+ REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
+ (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
+ }
+ REG_WR(sc, hw_lock_reg, 0xffffffff);
+ }
+
+ if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
+ REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
+ }
+
+ do {
+ /* Lock MCP using an unload request */
+ fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
+ if (!fw) {
+ PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
+ rc = -1;
+ break;
+ }
+
+ if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
+ rc = bnx2x_prev_unload_common(sc);
+ break;
+ }
+
+ /* non-common reply from MCP might require looping */
+ rc = bnx2x_prev_unload_uncommon(sc);
+ if (rc != BNX2X_PREV_WAIT_NEEDED) {
+ break;
+ }
+
+ DELAY(20000);
+ } while (--time_counter);
+
+ if (!time_counter || rc) {
+ PMD_DRV_LOG(NOTICE, "Failed to unload previous driver!");
+ rc = -1;
+ }
+
+ return rc;
+}
+
+static void
+bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
+{
+ if (!CHIP_IS_E1x(sc)) {
+ sc->dcb_state = dcb_on;
+ sc->dcbx_enabled = dcbx_enabled;
+ } else {
+ sc->dcb_state = FALSE;
+ sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
+ }
+ PMD_DRV_LOG(DEBUG,
+ "DCB state [%s:%s]",
+ dcb_on ? "ON" : "OFF",
+ (dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
+ (dcbx_enabled ==
+ BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
+ : (dcbx_enabled ==
+ BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
+ "on-chip with negotiation" : "invalid");
+}
+
+static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
+{
+ int cid_count = BNX2X_L2_MAX_CID(sc);
+
+ if (CNIC_SUPPORT(sc)) {
+ cid_count += CNIC_CID_MAX;
+ }
+
+ return roundup(cid_count, QM_CID_ROUND);
+}
+
+static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
+{
+ int pri, cos;
+
+ uint32_t pri_map = 0;
+
+ for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
+ cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
+ if (cos < sc->max_cos) {
+ sc->prio_to_cos[pri] = cos;
+ } else {
+ PMD_DRV_LOG(WARN,
+ "Invalid COS %d for priority %d "
+ "(max COS is %d), setting to 0", cos, pri,
+ (sc->max_cos - 1));
+ sc->prio_to_cos[pri] = 0;
+ }
+ }
+}
+
+static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
+{
+ struct {
+ uint8_t id;
+ uint8_t next;
+ } pci_cap;
+ uint16_t status;
+ struct bnx2x_pci_cap *cap;
+
+ cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
+ RTE_CACHE_LINE_SIZE);
+ if (!cap) {
+ PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
+ return -ENOMEM;
+ }
+
+ pci_read(sc, PCI_STATUS, &status, 2);
+ if (!(status & PCI_STATUS_CAP_LIST)) {
+ PMD_DRV_LOG(NOTICE, "PCIe capability reading failed");
+ return -1;
+ }
+
+ pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
+ while (pci_cap.next) {
+ cap->addr = pci_cap.next & ~3;
+ pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
+ if (pci_cap.id == 0xff)
+ break;
+ cap->id = pci_cap.id;
+ cap->type = BNX2X_PCI_CAP;
+ cap->next = rte_zmalloc("pci_cap",
+ sizeof(struct bnx2x_pci_cap),
+ RTE_CACHE_LINE_SIZE);
+ if (!cap->next) {
+ PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
+ return -ENOMEM;
+ }
+ cap = cap->next;
+ }
+
+ return 0;
+}
+
+static void bnx2x_init_rte(struct bnx2x_softc *sc)
+{
+ sc->max_tx_queues = 128;
+ sc->max_rx_queues = 128;
+}
+
+#define FW_HEADER_LEN 104
+#define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.2.51.0.fw"
+#define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.2.51.0.fw"
+
+void bnx2x_load_firmware(struct bnx2x_softc *sc)
+{
+ const char *fwname;
+ int f;
+ struct stat st;
+
+ fwname = sc->devinfo.device_id == BNX2X_DEV_ID_57711
+ ? FW_NAME_57711 : FW_NAME_57810;
+ f = open(fwname, O_RDONLY);
+ if (f < 0) {
+ PMD_DRV_LOG(NOTICE, "Can't open firmware file");
+ return;
+ }
+
+ if (fstat(f, &st) < 0) {
+ PMD_DRV_LOG(NOTICE, "Can't stat firmware file");
+ close(f);
+ return;
+ }
+
+ sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
+ if (!sc->firmware) {
+ PMD_DRV_LOG(NOTICE, "Can't allocate memory for firmware");
+ close(f);
+ return;
+ }
+
+ if (read(f, sc->firmware, st.st_size) != st.st_size) {
+ PMD_DRV_LOG(NOTICE, "Can't read firmware data");
+ close(f);
+ return;
+ }
+ close(f);
+
+ sc->fw_len = st.st_size;
+ if (sc->fw_len < FW_HEADER_LEN) {
+ PMD_DRV_LOG(NOTICE, "Invalid fw size: %lu", sc->fw_len);
+ return;
+ }
+ PMD_DRV_LOG(DEBUG, "fw_len = %lu", sc->fw_len);
+}
+
+static void
+bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
+{
+ uint32_t *src = (uint32_t *) data;
+ uint32_t i, j, tmp;
+
+ for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
+ tmp = rte_be_to_cpu_32(src[j]);
+ dst[i].op = (tmp >> 24) & 0xFF;
+ dst[i].offset = tmp & 0xFFFFFF;
+ dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
+ }
+}
+
+static void
+bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
+{
+ uint16_t *src = (uint16_t *) data;
+ uint32_t i;
+
+ for (i = 0; i < len / 2; ++i)
+ dst[i] = rte_be_to_cpu_16(src[i]);
+}
+
+static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
+{
+ uint32_t *src = (uint32_t *) data;
+ uint32_t i;
+
+ for (i = 0; i < len / 4; ++i)
+ dst[i] = rte_be_to_cpu_32(src[i]);
+}
+
+static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
+{
+ uint32_t *src = (uint32_t *) data;
+ uint32_t i, j, tmp;
+
+ for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
+ dst[i].base = rte_be_to_cpu_32(src[j++]);
+ tmp = rte_be_to_cpu_32(src[j]);
+ dst[i].m1 = (tmp >> 16) & 0xFFFF;
+ dst[i].m2 = tmp & 0xFFFF;
+ ++j;
+ tmp = rte_be_to_cpu_32(src[j]);
+ dst[i].m3 = (tmp >> 16) & 0xFFFF;
+ dst[i].size = tmp & 0xFFFF;
+ }
+}
+
+/*
+* Device attach function.
+*
+* Allocates device resources, performs secondary chip identification, and
+* initializes driver instance variables. This function is called from driver
+* load after a successful probe.
+*
+* Returns:
+* 0 = Success, >0 = Failure
+*/
+int bnx2x_attach(struct bnx2x_softc *sc)
+{
+ int rc;
+
+ PMD_DRV_LOG(DEBUG, "Starting attach...");
+
+ rc = bnx2x_pci_get_caps(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "PCIe caps reading was failed");
+ return rc;
+ }
+
+ sc->state = BNX2X_STATE_CLOSED;
+
+ /* Init RTE stuff */
+ bnx2x_init_rte(sc);
+
+ pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);
+
+ sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
+
+ /* get PCI capabilites */
+ bnx2x_probe_pci_caps(sc);
+
+ if (sc->devinfo.pcie_msix_cap_reg != 0) {
+ uint32_t val;
+ pci_read(sc,
+ (sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
+ 2);
+ sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE);
+ } else {
+ sc->igu_sb_cnt = 1;
+ }
+
+ if (IS_PF(sc)) {
+/* get device info and set params */
+ if (bnx2x_get_device_info(sc) != 0) {
+ PMD_DRV_LOG(NOTICE, "getting device info");
+ return -ENXIO;
+ }
+
+/* get phy settings from shmem and 'and' against admin settings */
+ bnx2x_get_phy_info(sc);
+ } else {
+/* Left mac of VF unfilled, PF should set it for VF */
+ memset(sc->link_params.mac_addr, 0, ETHER_ADDR_LEN);
+ }
+
+ sc->wol = 0;
+
+ /* set the default MTU (changed via ifconfig) */
+ sc->mtu = ETHER_MTU;
+
+ bnx2x_set_modes_bitmap(sc);
+
+ /* need to reset chip if UNDI was active */
+ if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
+/* init fw_seq */
+ sc->fw_seq =
+ (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK);
+ bnx2x_prev_unload(sc);
+ }
+
+ bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);
+
+ /* calculate qm_cid_count */
+ sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);
+
+ sc->max_cos = 1;
+ bnx2x_init_multi_cos(sc);
+
+ return 0;
+}
+
+static void
+bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
+ uint16_t index, uint8_t op, uint8_t update)
+{
+ uint32_t igu_addr = sc->igu_base_addr;
+ igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
+ bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
+}
+
+static void
+bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
+ uint16_t index, uint8_t op, uint8_t update)
+{
+ if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
+ bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
+ else {
+ uint8_t segment;
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ segment = storm;
+ } else if (igu_sb_id != sc->igu_dsb_id) {
+ segment = IGU_SEG_ACCESS_DEF;
+ } else if (storm == ATTENTION_ID) {
+ segment = IGU_SEG_ACCESS_ATTN;
+ } else {
+ segment = IGU_SEG_ACCESS_DEF;
+ }
+ bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
+ }
+}
+
+static void
+bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
+ uint8_t is_pf)
+{
+ uint32_t data, ctl, cnt = 100;
+ uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
+ uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
+ uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
+ (idu_sb_id / 32) * 4;
+ uint32_t sb_bit = 1 << (idu_sb_id % 32);
+ uint32_t func_encode = func |
+ (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
+ uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
+
+ /* Not supported in BC mode */
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ return;
+ }
+
+ data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
+ IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
+ IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);
+
+ ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
+ (func_encode << IGU_CTRL_REG_FID_SHIFT) |
+ (IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
+
+ REG_WR(sc, igu_addr_data, data);
+
+ mb();
+
+ PMD_DRV_LOG(DEBUG, "write 0x%08x to IGU(via GRC) addr 0x%x",
+ ctl, igu_addr_ctl);
+ REG_WR(sc, igu_addr_ctl, ctl);
+
+ mb();
+
+ /* wait for clean up to finish */
+ while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
+ DELAY(20000);
+ }
+
+ if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
+ PMD_DRV_LOG(DEBUG,
+ "Unable to finish IGU cleanup: "
+ "idu_sb_id %d offset %d bit %d (cnt %d)",
+ idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
+ }
+}
+
+static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
+{
+ bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
+}
+
+/*******************/
+/* ECORE CALLBACKS */
+/*******************/
+
+static void bnx2x_reset_common(struct bnx2x_softc *sc)
+{
+ uint32_t val = 0x1400;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* reset_common */
+ REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
+ 0xd3ffff7f);
+
+ if (CHIP_IS_E3(sc)) {
+ val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+ val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+ }
+
+ REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
+}
+
+static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
+{
+ uint32_t shmem_base[2];
+ uint32_t shmem2_base[2];
+
+ /* Avoid common init in case MFW supports LFA */
+ if (SHMEM2_RD(sc, size) >
+ (uint32_t) offsetof(struct shmem2_region,
+ lfa_host_addr[SC_PORT(sc)])) {
+ return;
+ }
+
+ shmem_base[0] = sc->devinfo.shmem_base;
+ shmem2_base[0] = sc->devinfo.shmem2_base;
+
+ if (!CHIP_IS_E1x(sc)) {
+ shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
+ shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
+ }
+
+ elink_common_init_phy(sc, shmem_base, shmem2_base,
+ sc->devinfo.chip_id, 0);
+}
+
+static void bnx2x_pf_disable(struct bnx2x_softc *sc)
+{
+ uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
+
+ val &= ~IGU_PF_CONF_FUNC_EN;
+
+ REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+ REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
+}
+
+static void bnx2x_init_pxp(struct bnx2x_softc *sc)
+{
+ uint16_t devctl;
+ int r_order, w_order;
+
+ devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);
+
+ w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
+ r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
+
+ ecore_init_pxp_arb(sc, r_order, w_order);
+}
+
+static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
+{
+ uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
+ uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
+ return (base + (SC_ABS_FUNC(sc)) * stride);
+}
+
+/*
+ * Called only on E1H or E2.
+ * When pretending to be PF, the pretend value is the function number 0..7.
+ * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
+ * combination.
+ */
+static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
+{
+ uint32_t pretend_reg;
+
+ if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
+ return -1;
+
+ /* get my own pretend register */
+ pretend_reg = bnx2x_get_pretend_reg(sc);
+ REG_WR(sc, pretend_reg, pretend_func_val);
+ REG_RD(sc, pretend_reg);
+ return 0;
+}
+
+static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
+{
+ int is_required;
+ uint32_t val;
+ int port;
+
+ is_required = 0;
+ val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
+ SHARED_HW_CFG_FAN_FAILURE_MASK);
+
+ if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
+ is_required = 1;
+ }
+ /*
+ * The fan failure mechanism is usually related to the PHY type since
+ * the power consumption of the board is affected by the PHY. Currently,
+ * fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
+ */
+ else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
+ for (port = PORT_0; port < PORT_MAX; port++) {
+ is_required |= elink_fan_failure_det_req(sc,
+ sc->
+ devinfo.shmem_base,
+ sc->
+ devinfo.shmem2_base,
+ port);
+ }
+ }
+
+ if (is_required == 0) {
+ return;
+ }
+
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(sc, MISC_REG_SPIO_INT);
+ val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
+ REG_WR(sc, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
+ val |= MISC_SPIO_SPIO5;
+ REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
+}
+
+static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
+{
+ uint32_t val;
+
+ REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
+ } else {
+ REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
+ }
+ REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
+ REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
+ /*
+ * mask read length error interrupts in brb for parser
+ * (parsing unit and 'checksum and crc' unit)
+ * these errors are legal (PU reads fixed length and CAC can cause
+ * read length error on truncated packets)
+ */
+ REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
+ REG_WR(sc, QM_REG_QM_INT_MASK, 0);
+ REG_WR(sc, TM_REG_TM_INT_MASK, 0);
+ REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
+ REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
+ REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
+ /* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
+ /* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
+ REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
+ REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
+ REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
+ /* REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
+ /* REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
+ REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
+ REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
+ REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
+ REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
+ /* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
+ /* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
+
+ val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
+ PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
+ PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
+ if (!CHIP_IS_E1x(sc)) {
+ val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
+ PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
+ }
+ REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
+
+ REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
+ REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
+ REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
+ /* REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
+
+ if (!CHIP_IS_E1x(sc)) {
+/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
+ REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
+ }
+
+ REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
+ REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
+ /* REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
+ REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
+}
+
+/**
+ * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
+ *
+ * @sc: driver handle
+ */
+static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
+{
+ uint8_t abs_func_id;
+ uint32_t val;
+
+ PMD_DRV_LOG(DEBUG, "starting common init for func %d", SC_ABS_FUNC(sc));
+
+ /*
+ * take the RESET lock to protect undi_unload flow from accessing
+ * registers while we are resetting the chip
+ */
+ bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+ bnx2x_reset_common(sc);
+
+ REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
+
+ val = 0xfffc;
+ if (CHIP_IS_E3(sc)) {
+ val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
+ val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
+ }
+
+ REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
+
+ bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
+
+ ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
+
+ if (!CHIP_IS_E1x(sc)) {
+/*
+ * 4-port mode or 2-port mode we need to turn off master-enable for
+ * everyone. After that we turn it back on for self. So, we disregard
+ * multi-function, and always disable all functions on the given path,
+ * this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
+ */
+ for (abs_func_id = SC_PATH(sc);
+ abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
+ if (abs_func_id == SC_ABS_FUNC(sc)) {
+ REG_WR(sc,
+ PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
+ 1);
+ continue;
+ }
+
+ bnx2x_pretend_func(sc, abs_func_id);
+
+ /* clear pf enable */
+ bnx2x_pf_disable(sc);
+
+ bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
+ }
+ }
+
+ ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
+ bnx2x_init_pxp(sc);
+
+#ifdef __BIG_ENDIAN
+ REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
+ REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
+ REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
+ REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
+ REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
+ /* make sure this value is 0 */
+ REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
+
+ //REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
+ REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
+ REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
+ REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
+ REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
+#endif
+
+ ecore_ilt_init_page_size(sc, INITOP_SET);
+
+ if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
+ REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
+ }
+
+ /* let the HW do it's magic... */
+ DELAY(100000);
+
+ /* finish PXP init */
+
+ val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "PXP2 CFG failed");
+ return -1;
+ }
+ val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "PXP2 RD_INIT failed");
+ return -1;
+ }
+
+ /*
+ * Timer bug workaround for E2 only. We need to set the entire ILT to have
+ * entries with value "0" and valid bit on. This needs to be done by the
+ * first PF that is loaded in a path (i.e. common phase)
+ */
+ if (!CHIP_IS_E1x(sc)) {
+/*
+ * In E2 there is a bug in the timers block that can cause function 6 / 7
+ * (i.e. vnic3) to start even if it is marked as "scan-off".
+ * This occurs when a different function (func2,3) is being marked
+ * as "scan-off". Real-life scenario for example: if a driver is being
+ * load-unloaded while func6,7 are down. This will cause the timer to access
+ * the ilt, translate to a logical address and send a request to read/write.
+ * Since the ilt for the function that is down is not valid, this will cause
+ * a translation error which is unrecoverable.
+ * The Workaround is intended to make sure that when this happens nothing
+ * fatal will occur. The workaround:
+ * 1. First PF driver which loads on a path will:
+ * a. After taking the chip out of reset, by using pretend,
+ * it will write "0" to the following registers of
+ * the other vnics.
+ * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
+ * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
+ * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
+ * And for itself it will write '1' to
+ * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
+ * dmae-operations (writing to pram for example.)
+ * note: can be done for only function 6,7 but cleaner this
+ * way.
+ * b. Write zero+valid to the entire ILT.
+ * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
+ * VNIC3 (of that port). The range allocated will be the
+ * entire ILT. This is needed to prevent ILT range error.
+ * 2. Any PF driver load flow:
+ * a. ILT update with the physical addresses of the allocated
+ * logical pages.
+ * b. Wait 20msec. - note that this timeout is needed to make
+ * sure there are no requests in one of the PXP internal
+ * queues with "old" ILT addresses.
+ * c. PF enable in the PGLC.
+ * d. Clear the was_error of the PF in the PGLC. (could have
+ * occurred while driver was down)
+ * e. PF enable in the CFC (WEAK + STRONG)
+ * f. Timers scan enable
+ * 3. PF driver unload flow:
+ * a. Clear the Timers scan_en.
+ * b. Polling for scan_on=0 for that PF.
+ * c. Clear the PF enable bit in the PXP.
+ * d. Clear the PF enable in the CFC (WEAK + STRONG)
+ * e. Write zero+valid to all ILT entries (The valid bit must
+ * stay set)
+ * f. If this is VNIC 3 of a port then also init
+ * first_timers_ilt_entry to zero and last_timers_ilt_entry
+ * to the last enrty in the ILT.
+ *
+ * Notes:
+ * Currently the PF error in the PGLC is non recoverable.
+ * In the future the there will be a recovery routine for this error.
+ * Currently attention is masked.
+ * Having an MCP lock on the load/unload process does not guarantee that
+ * there is no Timer disable during Func6/7 enable. This is because the
+ * Timers scan is currently being cleared by the MCP on FLR.
+ * Step 2.d can be done only for PF6/7 and the driver can also check if
+ * there is error before clearing it. But the flow above is simpler and
+ * more general.
+ * All ILT entries are written by zero+valid and not just PF6/7
+ * ILT entries since in the future the ILT entries allocation for
+ * PF-s might be dynamic.
+ */
+ struct ilt_client_info ilt_cli;
+ struct ecore_ilt ilt;
+
+ memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+ memset(&ilt, 0, sizeof(struct ecore_ilt));
+
+/* initialize dummy TM client */
+ ilt_cli.start = 0;
+ ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+ ilt_cli.client_num = ILT_CLIENT_TM;
+
+/*
+ * Step 1: set zeroes to all ilt page entries with valid bit on
+ * Step 2: set the timers first/last ilt entry to point
+ * to the entire range to prevent ILT range error for 3rd/4th
+ * vnic (this code assumes existence of the vnic)
+ *
+ * both steps performed by call to ecore_ilt_client_init_op()
+ * with dummy TM client
+ *
+ * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
+ * and his brother are split registers
+ */
+
+ bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
+ ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
+ bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
+
+ REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
+ REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
+ REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
+ }
+
+ REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
+ REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
+
+ if (!CHIP_IS_E1x(sc)) {
+ int factor = 0;
+
+ ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
+
+/* let the HW do it's magic... */
+ do {
+ DELAY(200000);
+ val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
+ } while (factor-- && (val != 1));
+
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "ATC_INIT failed");
+ return -1;
+ }
+ }
+
+ ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
+
+ /* clean the DMAE memory */
+ sc->dmae_ready = 1;
+ ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8);
+
+ ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
+
+ bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
+ bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
+ bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
+ bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
+
+ ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
+
+ /* QM queues pointers table */
+ ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
+
+ /* soft reset pulse */
+ REG_WR(sc, QM_REG_SOFT_RESET, 1);
+ REG_WR(sc, QM_REG_SOFT_RESET, 0);
+
+ if (CNIC_SUPPORT(sc))
+ ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
+ REG_WR(sc, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);
+
+ if (!CHIP_REV_IS_SLOW(sc)) {
+/* enable hw interrupt from doorbell Q */
+ REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
+ }
+
+ ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
+
+ ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
+ REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
+ REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
+
+ if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
+ if (IS_MF_AFEX(sc)) {
+ /*
+ * configure that AFEX and VLAN headers must be
+ * received in AFEX mode
+ */
+ REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
+ REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
+ REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
+ REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
+ REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
+ } else {
+ /*
+ * Bit-map indicating which L2 hdrs may appear
+ * after the basic Ethernet header
+ */
+ REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
+ sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
+ }
+ }
+
+ ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
+
+ if (!CHIP_IS_E1x(sc)) {
+/* reset VFC memories */
+ REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+ VFC_MEMORIES_RST_REG_CAM_RST |
+ VFC_MEMORIES_RST_REG_RAM_RST);
+ REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
+ VFC_MEMORIES_RST_REG_CAM_RST |
+ VFC_MEMORIES_RST_REG_RAM_RST);
+
+ DELAY(20000);
+ }
+
+ ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
+
+ /* sync semi rtc */
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
+ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
+
+ ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
+
+ if (!CHIP_IS_E1x(sc)) {
+ if (IS_MF_AFEX(sc)) {
+ /*
+ * configure that AFEX and VLAN headers must be
+ * sent in AFEX mode
+ */
+ REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
+ REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
+ REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
+ REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
+ REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
+ } else {
+ REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
+ sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
+ }
+ }
+
+ REG_WR(sc, SRC_REG_SOFT_RST, 1);
+
+ ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
+
+ if (CNIC_SUPPORT(sc)) {
+ REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
+ REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
+ REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
+ REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
+ REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
+ REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
+ REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
+ REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
+ REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
+ REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
+ }
+ REG_WR(sc, SRC_REG_SOFT_RST, 0);
+
+ if (sizeof(union cdu_context) != 1024) {
+/* we currently assume that a context is 1024 bytes */
+ PMD_DRV_LOG(NOTICE,
+ "please adjust the size of cdu_context(%ld)",
+ (long)sizeof(union cdu_context));
+ }
+
+ ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
+ val = (4 << 24) + (0 << 12) + 1024;
+ REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
+
+ ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
+
+ REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
+ /* enable context validation interrupt from CFC */
+ REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
+
+ /* set the thresholds to prevent CFC/CDU race */
+ REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
+ ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
+
+ if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
+ REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
+ }
+
+ ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
+ ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
+
+ /* Reset PCIE errors for debug */
+ REG_WR(sc, 0x2814, 0xffffffff);
+ REG_WR(sc, 0x3820, 0xffffffff);
+
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
+ (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
+ PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
+ REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
+ (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
+ PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
+ PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
+ REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
+ (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
+ PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
+ PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
+ }
+
+ ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
+
+ /* in E3 this done in per-port section */
+ if (!CHIP_IS_E3(sc))
+ REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
+
+ if (CHIP_IS_E1H(sc)) {
+/* not applicable for E2 (and above ...) */
+ REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
+ }
+
+ if (CHIP_REV_IS_SLOW(sc)) {
+ DELAY(200000);
+ }
+
+ /* finish CFC init */
+ val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "CFC LL_INIT failed");
+ return -1;
+ }
+ val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "CFC AC_INIT failed");
+ return -1;
+ }
+ val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
+ if (val != 1) {
+ PMD_DRV_LOG(NOTICE, "CFC CAM_INIT failed");
+ return -1;
+ }
+ REG_WR(sc, CFC_REG_DEBUG0, 0);
+
+ bnx2x_setup_fan_failure_detection(sc);
+
+ /* clear PXP2 attentions */
+ REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
+
+ bnx2x_enable_blocks_attention(sc);
+
+ if (!CHIP_REV_IS_SLOW(sc)) {
+ ecore_enable_blocks_parity(sc);
+ }
+
+ if (!BNX2X_NOMCP(sc)) {
+ if (CHIP_IS_E1x(sc)) {
+ bnx2x_common_init_phy(sc);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
+ *
+ * @sc: driver handle
+ */
+static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
+{
+ int rc = bnx2x_init_hw_common(sc);
+
+ if (rc) {
+ return rc;
+ }
+
+ /* In E2 2-PORT mode, same ext phy is used for the two paths */
+ if (!BNX2X_NOMCP(sc)) {
+ bnx2x_common_init_phy(sc);
+ }
+
+ return 0;
+}
+
+static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
+ uint32_t low, high;
+ uint32_t val;
+
+ PMD_DRV_LOG(DEBUG, "starting port init for port %d", port);
+
+ REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
+
+ ecore_init_block(sc, BLOCK_MISC, init_phase);
+ ecore_init_block(sc, BLOCK_PXP, init_phase);
+ ecore_init_block(sc, BLOCK_PXP2, init_phase);
+
+ /*
+ * Timers bug workaround: disables the pf_master bit in pglue at
+ * common phase, we need to enable it here before any dmae access are
+ * attempted. Therefore we manually added the enable-master to the
+ * port phase (it also happens in the function phase)
+ */
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+ }
+
+ ecore_init_block(sc, BLOCK_ATC, init_phase);
+ ecore_init_block(sc, BLOCK_DMAE, init_phase);
+ ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
+ ecore_init_block(sc, BLOCK_QM, init_phase);
+
+ ecore_init_block(sc, BLOCK_TCM, init_phase);
+ ecore_init_block(sc, BLOCK_UCM, init_phase);
+ ecore_init_block(sc, BLOCK_CCM, init_phase);
+ ecore_init_block(sc, BLOCK_XCM, init_phase);
+
+ /* QM cid (connection) count */
+ ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
+
+ if (CNIC_SUPPORT(sc)) {
+ ecore_init_block(sc, BLOCK_TM, init_phase);
+ REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
+ REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
+ }
+
+ ecore_init_block(sc, BLOCK_DORQ, init_phase);
+
+ ecore_init_block(sc, BLOCK_BRB1, init_phase);
+
+ if (CHIP_IS_E1H(sc)) {
+ if (IS_MF(sc)) {
+ low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
+ } else if (sc->mtu > 4096) {
+ if (BNX2X_ONE_PORT(sc)) {
+ low = 160;
+ } else {
+ val = sc->mtu;
+ /* (24*1024 + val*4)/256 */
+ low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
+ }
+ } else {
+ low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
+ }
+ high = (low + 56); /* 14*1024/256 */
+ REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
+ REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
+ }
+
+ if (CHIP_IS_MODE_4_PORT(sc)) {
+ REG_WR(sc, SC_PORT(sc) ?
+ BRB1_REG_MAC_GUARANTIED_1 :
+ BRB1_REG_MAC_GUARANTIED_0, 40);
+ }
+
+ ecore_init_block(sc, BLOCK_PRS, init_phase);
+ if (CHIP_IS_E3B0(sc)) {
+ if (IS_MF_AFEX(sc)) {
+ /* configure headers for AFEX mode */
+ if (SC_PORT(sc)) {
+ REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
+ 0xE);
+ REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
+ 0x6);
+ REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
+ } else {
+ REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
+ 0xE);
+ REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
+ 0x6);
+ REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
+ }
+ } else {
+ /* Ovlan exists only if we are in multi-function +
+ * switch-dependent mode, in switch-independent there
+ * is no ovlan headers
+ */
+ REG_WR(sc, SC_PORT(sc) ?
+ PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
+ PRS_REG_HDRS_AFTER_BASIC_PORT_0,
+ (sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
+ }
+ }
+
+ ecore_init_block(sc, BLOCK_TSDM, init_phase);
+ ecore_init_block(sc, BLOCK_CSDM, init_phase);
+ ecore_init_block(sc, BLOCK_USDM, init_phase);
+ ecore_init_block(sc, BLOCK_XSDM, init_phase);
+
+ ecore_init_block(sc, BLOCK_TSEM, init_phase);
+ ecore_init_block(sc, BLOCK_USEM, init_phase);
+ ecore_init_block(sc, BLOCK_CSEM, init_phase);
+ ecore_init_block(sc, BLOCK_XSEM, init_phase);
+
+ ecore_init_block(sc, BLOCK_UPB, init_phase);
+ ecore_init_block(sc, BLOCK_XPB, init_phase);
+
+ ecore_init_block(sc, BLOCK_PBF, init_phase);
+
+ if (CHIP_IS_E1x(sc)) {
+/* configure PBF to work without PAUSE mtu 9000 */
+ REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
+
+/* update threshold */
+ REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
+/* update init credit */
+ REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
+ (9040 / 16) + 553 - 22);
+
+/* probe changes */
+ REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
+ DELAY(50);
+ REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
+ }
+
+ if (CNIC_SUPPORT(sc)) {
+ ecore_init_block(sc, BLOCK_SRC, init_phase);
+ }
+
+ ecore_init_block(sc, BLOCK_CDU, init_phase);
+ ecore_init_block(sc, BLOCK_CFC, init_phase);
+ ecore_init_block(sc, BLOCK_HC, init_phase);
+ ecore_init_block(sc, BLOCK_IGU, init_phase);
+ ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
+ /* init aeu_mask_attn_func_0/1:
+ * - SF mode: bits 3-7 are masked. only bits 0-2 are in use
+ * - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
+ * bits 4-7 are used for "per vn group attention" */
+ val = IS_MF(sc) ? 0xF7 : 0x7;
+ val |= 0x10;
+ REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);
+
+ ecore_init_block(sc, BLOCK_NIG, init_phase);
+
+ if (!CHIP_IS_E1x(sc)) {
+/* Bit-map indicating which L2 hdrs may appear after the
+ * basic Ethernet header
+ */
+ if (IS_MF_AFEX(sc)) {
+ REG_WR(sc, SC_PORT(sc) ?
+ NIG_REG_P1_HDRS_AFTER_BASIC :
+ NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
+ } else {
+ REG_WR(sc, SC_PORT(sc) ?
+ NIG_REG_P1_HDRS_AFTER_BASIC :
+ NIG_REG_P0_HDRS_AFTER_BASIC,
+ IS_MF_SD(sc) ? 7 : 6);
+ }
+
+ if (CHIP_IS_E3(sc)) {
+ REG_WR(sc, SC_PORT(sc) ?
+ NIG_REG_LLH1_MF_MODE :
+ NIG_REG_LLH_MF_MODE, IS_MF(sc));
+ }
+ }
+ if (!CHIP_IS_E3(sc)) {
+ REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
+ }
+
+ /* 0x2 disable mf_ov, 0x1 enable */
+ REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
+ (IS_MF_SD(sc) ? 0x1 : 0x2));
+
+ if (!CHIP_IS_E1x(sc)) {
+ val = 0;
+ switch (sc->devinfo.mf_info.mf_mode) {
+ case MULTI_FUNCTION_SD:
+ val = 1;
+ break;
+ case MULTI_FUNCTION_SI:
+ case MULTI_FUNCTION_AFEX:
+ val = 2;
+ break;
+ }
+
+ REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
+ NIG_REG_LLH0_CLS_TYPE), val);
+ }
+ REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
+ REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
+ REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
+
+ /* If SPIO5 is set to generate interrupts, enable it for this port */
+ val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
+ if (val & MISC_SPIO_SPIO5) {
+ uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ val = REG_RD(sc, reg_addr);
+ val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(sc, reg_addr, val);
+ }
+
+ return 0;
+}
+
+static uint32_t
+bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
+ uint32_t expected, uint32_t poll_count)
+{
+ uint32_t cur_cnt = poll_count;
+ uint32_t val;
+
+ while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
+ DELAY(FLR_WAIT_INTERVAL);
+ }
+
+ return val;
+}
+
+static int
+bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
+ __rte_unused const char *msg, uint32_t poll_cnt)
+{
+ uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
+
+ if (val != 0) {
+ PMD_DRV_LOG(NOTICE, "%s usage count=%d", msg, val);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Common routines with VF FLR cleanup */
+static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
+{
+ /* adjust polling timeout */
+ if (CHIP_REV_IS_EMUL(sc)) {
+ return (FLR_POLL_CNT * 2000);
+ }
+
+ if (CHIP_REV_IS_FPGA(sc)) {
+ return (FLR_POLL_CNT * 120);
+ }
+
+ return FLR_POLL_CNT;
+}
+
+static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
+{
+ /* wait for CFC PF usage-counter to zero (includes all the VFs) */
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ CFC_REG_NUM_LCIDS_INSIDE_PF,
+ "CFC PF usage counter timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ DORQ_REG_PF_USAGE_CNT,
+ "DQ PF usage counter timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
+ "QM PF usage counter timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
+ "Timers VNIC usage counter timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ TM_REG_LIN0_NUM_SCANS +
+ 4 * SC_PORT(sc),
+ "Timers NUM_SCANS usage counter timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ /* Wait DMAE PF usage counter to zero */
+ if (bnx2x_flr_clnup_poll_hw_counter(sc,
+ dmae_reg_go_c[INIT_DMAE_C(sc)],
+ "DMAE dommand register timed out",
+ poll_cnt)) {
+ return -1;
+ }
+
+ return 0;
+}
+
+#define OP_GEN_PARAM(param) \
+ (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
+#define OP_GEN_TYPE(type) \
+ (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
+#define OP_GEN_AGG_VECT(index) \
+ (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
+
+static int
+bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
+ uint32_t poll_cnt)
+{
+ uint32_t op_gen_command = 0;
+ uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
+ CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
+ int ret = 0;
+
+ if (REG_RD(sc, comp_addr)) {
+ PMD_DRV_LOG(NOTICE,
+ "Cleanup complete was not 0 before sending");
+ return -1;
+ }
+
+ op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
+ op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
+ op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
+ op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
+
+ REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
+
+ if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
+ PMD_DRV_LOG(NOTICE, "FW final cleanup did not succeed");
+ PMD_DRV_LOG(DEBUG, "At timeout completion address contained %x",
+ (REG_RD(sc, comp_addr)));
+ rte_panic("FLR cleanup failed");
+ return -1;
+ }
+
+ /* Zero completion for nxt FLR */
+ REG_WR(sc, comp_addr, 0);
+
+ return ret;
+}
+
+static void
+bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
+ uint32_t poll_count)
+{
+ uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
+ uint32_t cur_cnt = poll_count;
+
+ crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
+ crd = crd_start = REG_RD(sc, regs->crd);
+ init_crd = REG_RD(sc, regs->init_crd);
+
+ while ((crd != init_crd) &&
+ ((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
+ (init_crd - crd_start))) {
+ if (cur_cnt--) {
+ DELAY(FLR_WAIT_INTERVAL);
+ crd = REG_RD(sc, regs->crd);
+ crd_freed = REG_RD(sc, regs->crd_freed);
+ } else {
+ break;
+ }
+ }
+}
+
+static void
+bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
+ uint32_t poll_count)
+{
+ uint32_t occup, to_free, freed, freed_start;
+ uint32_t cur_cnt = poll_count;
+
+ occup = to_free = REG_RD(sc, regs->lines_occup);
+ freed = freed_start = REG_RD(sc, regs->lines_freed);
+
+ while (occup &&
+ ((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
+ to_free)) {
+ if (cur_cnt--) {
+ DELAY(FLR_WAIT_INTERVAL);
+ occup = REG_RD(sc, regs->lines_occup);
+ freed = REG_RD(sc, regs->lines_freed);
+ } else {
+ break;
+ }
+ }
+}
+
+static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
+{
+ struct pbf_pN_cmd_regs cmd_regs[] = {
+ {0, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
+ {1, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
+ {4, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
+ PBF_REG_P4_TQ_LINES_FREED_CNT}
+ };
+
+ struct pbf_pN_buf_regs buf_regs[] = {
+ {0, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
+ (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
+ PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
+ {1, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
+ (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
+ PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
+ {4, (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
+ (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
+ (CHIP_IS_E3B0(sc)) ?
+ PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
+ PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
+ };
+
+ uint32_t i;
+
+ /* Verify the command queues are flushed P0, P1, P4 */
+ for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
+ bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
+ }
+
+ /* Verify the transmission buffers are flushed P0, P1, P4 */
+ for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
+ bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
+ }
+}
+
+static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
+{
+ __rte_unused uint32_t val;
+
+ val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
+ PMD_DRV_LOG(DEBUG, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);
+
+ val = REG_RD(sc, PBF_REG_DISABLE_PF);
+ PMD_DRV_LOG(DEBUG, "PBF_REG_DISABLE_PF is 0x%x", val);
+
+ val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
+ PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);
+
+ val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
+ PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);
+
+ val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
+ PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);
+
+ val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
+ PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);
+
+ val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
+ PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);
+
+ val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
+ PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
+ val);
+}
+
+/**
+ * bnx2x_pf_flr_clnup
+ * a. re-enable target read on the PF
+ * b. poll cfc per function usgae counter
+ * c. poll the qm perfunction usage counter
+ * d. poll the tm per function usage counter
+ * e. poll the tm per function scan-done indication
+ * f. clear the dmae channel associated wit hthe PF
+ * g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
+ * h. call the common flr cleanup code with -1 (pf indication)
+ */
+static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
+{
+ uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);
+
+ /* Re-enable PF target read access */
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
+
+ /* Poll HW usage counters */
+ if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
+ return -1;
+ }
+
+ /* Zero the igu 'trailing edge' and 'leading edge' */
+
+ /* Send the FW cleanup command */
+ if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
+ return -1;
+ }
+
+ /* ATC cleanup */
+
+ /* Verify TX hw is flushed */
+ bnx2x_tx_hw_flushed(sc, poll_cnt);
+
+ /* Wait 100ms (not adjusted according to platform) */
+ DELAY(100000);
+
+ /* Verify no pending pci transactions */
+ if (bnx2x_is_pcie_pending(sc)) {
+ PMD_DRV_LOG(NOTICE, "PCIE Transactions still pending");
+ }
+
+ /* Debug */
+ bnx2x_hw_enable_status(sc);
+
+ /*
+ * Master enable - Due to WB DMAE writes performed before this
+ * register is re-initialized as part of the regular function init
+ */
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+
+ return 0;
+}
+
+static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ int func = SC_FUNC(sc);
+ int init_phase = PHASE_PF0 + func;
+ struct ecore_ilt *ilt = sc->ilt;
+ uint16_t cdu_ilt_start;
+ uint32_t addr, val;
+ uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
+ int main_mem_width, rc;
+ uint32_t i;
+
+ PMD_DRV_LOG(DEBUG, "starting func init for func %d", func);
+
+ /* FLR cleanup */
+ if (!CHIP_IS_E1x(sc)) {
+ rc = bnx2x_pf_flr_clnup(sc);
+ if (rc) {
+ PMD_DRV_LOG(NOTICE, "FLR cleanup failed!");
+ return rc;
+ }
+ }
+
+ /* set MSI reconfigure capability */
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
+ val = REG_RD(sc, addr);
+ val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
+ REG_WR(sc, addr, val);
+ }
+
+ ecore_init_block(sc, BLOCK_PXP, init_phase);
+ ecore_init_block(sc, BLOCK_PXP2, init_phase);
+
+ ilt = sc->ilt;
+ cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
+
+ for (i = 0; i < L2_ILT_LINES(sc); i++) {
+ ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
+ ilt->lines[cdu_ilt_start + i].page_mapping =
+ (phys_addr_t)((void *)sc->context[i].vcxt_dma.paddr);
+ ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
+ }
+ ecore_ilt_init_op(sc, INITOP_SET);
+
+ REG_WR(sc, PRS_REG_NIC_MODE, 1);
+
+ if (!CHIP_IS_E1x(sc)) {
+ uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
+
+/* Turn on a single ISR mode in IGU if driver is going to use
+ * INT#x or MSI
+ */
+ if ((sc->interrupt_mode != INTR_MODE_MSIX)
+ || (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
+ pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
+ }
+
+/*
+ * Timers workaround bug: function init part.
+ * Need to wait 20msec after initializing ILT,
+ * needed to make sure there are no requests in
+ * one of the PXP internal queues with "old" ILT addresses
+ */
+ DELAY(20000);
+
+/*
+ * Master enable - Due to WB DMAE writes performed before this
+ * register is re-initialized as part of the regular function
+ * init
+ */
+ REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
+/* Enable the function in IGU */
+ REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
+ }
+
+ sc->dmae_ready = 1;
+
+ ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
+
+ if (!CHIP_IS_E1x(sc))
+ REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
+
+ ecore_init_block(sc, BLOCK_ATC, init_phase);
+ ecore_init_block(sc, BLOCK_DMAE, init_phase);
+ ecore_init_block(sc, BLOCK_NIG, init_phase);
+ ecore_init_block(sc, BLOCK_SRC, init_phase);
+ ecore_init_block(sc, BLOCK_MISC, init_phase);
+ ecore_init_block(sc, BLOCK_TCM, init_phase);
+ ecore_init_block(sc, BLOCK_UCM, init_phase);
+ ecore_init_block(sc, BLOCK_CCM, init_phase);
+ ecore_init_block(sc, BLOCK_XCM, init_phase);
+ ecore_init_block(sc, BLOCK_TSEM, init_phase);
+ ecore_init_block(sc, BLOCK_USEM, init_phase);
+ ecore_init_block(sc, BLOCK_CSEM, init_phase);
+ ecore_init_block(sc, BLOCK_XSEM, init_phase);
+
+ if (!CHIP_IS_E1x(sc))
+ REG_WR(sc, QM_REG_PF_EN, 1);
+
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+ REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+ REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+ REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
+ }
+ ecore_init_block(sc, BLOCK_QM, init_phase);
+
+ ecore_init_block(sc, BLOCK_TM, init_phase);
+ ecore_init_block(sc, BLOCK_DORQ, init_phase);
+
+ ecore_init_block(sc, BLOCK_BRB1, init_phase);
+ ecore_init_block(sc, BLOCK_PRS, init_phase);
+ ecore_init_block(sc, BLOCK_TSDM, init_phase);
+ ecore_init_block(sc, BLOCK_CSDM, init_phase);
+ ecore_init_block(sc, BLOCK_USDM, init_phase);
+ ecore_init_block(sc, BLOCK_XSDM, init_phase);
+ ecore_init_block(sc, BLOCK_UPB, init_phase);
+ ecore_init_block(sc, BLOCK_XPB, init_phase);
+ ecore_init_block(sc, BLOCK_PBF, init_phase);
+ if (!CHIP_IS_E1x(sc))
+ REG_WR(sc, PBF_REG_DISABLE_PF, 0);
+
+ ecore_init_block(sc, BLOCK_CDU, init_phase);
+
+ ecore_init_block(sc, BLOCK_CFC, init_phase);
+
+ if (!CHIP_IS_E1x(sc))
+ REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
+
+ if (IS_MF(sc)) {
+ REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
+ REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
+ }
+
+ ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
+
+ /* HC init per function */
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ if (CHIP_IS_E1H(sc)) {
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+
+ REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
+ REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
+ }
+ ecore_init_block(sc, BLOCK_HC, init_phase);
+
+ } else {
+ uint32_t num_segs, sb_idx, prod_offset;
+
+ REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
+
+ if (!CHIP_IS_E1x(sc)) {
+ REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
+ REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
+ }
+
+ ecore_init_block(sc, BLOCK_IGU, init_phase);
+
+ if (!CHIP_IS_E1x(sc)) {
+ int dsb_idx = 0;
+ /**
+ * Producer memory:
+ * E2 mode: address 0-135 match to the mapping memory;
+ * 136 - PF0 default prod; 137 - PF1 default prod;
+ * 138 - PF2 default prod; 139 - PF3 default prod;
+ * 140 - PF0 attn prod; 141 - PF1 attn prod;
+ * 142 - PF2 attn prod; 143 - PF3 attn prod;
+ * 144-147 reserved.
+ *
+ * E1.5 mode - In backward compatible mode;
+ * for non default SB; each even line in the memory
+ * holds the U producer and each odd line hold
+ * the C producer. The first 128 producers are for
+ * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
+ * producers are for the DSB for each PF.
+ * Each PF has five segments: (the order inside each
+ * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
+ * 132-135 C prods; 136-139 X prods; 140-143 T prods;
+ * 144-147 attn prods;
+ */
+ /* non-default-status-blocks */
+ num_segs = CHIP_INT_MODE_IS_BC(sc) ?
+ IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
+ for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
+ prod_offset = (sc->igu_base_sb + sb_idx) *
+ num_segs;
+
+ for (i = 0; i < num_segs; i++) {
+ addr = IGU_REG_PROD_CONS_MEMORY +
+ (prod_offset + i) * 4;
+ REG_WR(sc, addr, 0);
+ }
+ /* send consumer update with value 0 */
+ bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
+ USTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
+ }
+
+ /* default-status-blocks */
+ num_segs = CHIP_INT_MODE_IS_BC(sc) ?
+ IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
+
+ if (CHIP_IS_MODE_4_PORT(sc))
+ dsb_idx = SC_FUNC(sc);
+ else
+ dsb_idx = SC_VN(sc);
+
+ prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
+ IGU_BC_BASE_DSB_PROD + dsb_idx :
+ IGU_NORM_BASE_DSB_PROD + dsb_idx);
+
+ /*
+ * igu prods come in chunks of E1HVN_MAX (4) -
+ * does not matters what is the current chip mode
+ */
+ for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
+ addr = IGU_REG_PROD_CONS_MEMORY +
+ (prod_offset + i) * 4;
+ REG_WR(sc, addr, 0);
+ }
+ /* send consumer update with 0 */
+ if (CHIP_INT_MODE_IS_BC(sc)) {
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ USTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ CSTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ XSTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ TSTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ ATTENTION_ID, 0, IGU_INT_NOP, 1);
+ } else {
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ USTORM_ID, 0, IGU_INT_NOP, 1);
+ bnx2x_ack_sb(sc, sc->igu_dsb_id,
+ ATTENTION_ID, 0, IGU_INT_NOP, 1);
+ }
+ bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);
+
+ /* !!! these should become driver const once
+ rf-tool supports split-68 const */
+ REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
+ REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
+ REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
+ REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
+ REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
+ REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
+ }
+ }
+
+ /* Reset PCIE errors for debug */
+ REG_WR(sc, 0x2114, 0xffffffff);
+ REG_WR(sc, 0x2120, 0xffffffff);
+
+ if (CHIP_IS_E1x(sc)) {
+ main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords */
+ main_mem_base = HC_REG_MAIN_MEMORY +
+ SC_PORT(sc) * (main_mem_size * 4);
+ main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
+ main_mem_width = 8;
+
+ val = REG_RD(sc, main_mem_prty_clr);
+ if (val) {
+ PMD_DRV_LOG(DEBUG,
+ "Parity errors in HC block during function init (0x%x)!",
+ val);
+ }
+
+/* Clear "false" parity errors in MSI-X table */
+ for (i = main_mem_base;
+ i < main_mem_base + main_mem_size * 4;
+ i += main_mem_width) {
+ bnx2x_read_dmae(sc, i, main_mem_width / 4);
+ bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
+ i, main_mem_width / 4);
+ }
+/* Clear HC parity attention */
+ REG_RD(sc, main_mem_prty_clr);
+ }
+
+ /* Enable STORMs SP logging */
+ REG_WR8(sc, BAR_USTRORM_INTMEM +
+ USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+ REG_WR8(sc, BAR_TSTRORM_INTMEM +
+ TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+ REG_WR8(sc, BAR_CSTRORM_INTMEM +
+ CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+ REG_WR8(sc, BAR_XSTRORM_INTMEM +
+ XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
+
+ elink_phy_probe(&sc->link_params);
+
+ return 0;
+}
+
+static void bnx2x_link_reset(struct bnx2x_softc *sc)
+{
+ if (!BNX2X_NOMCP(sc)) {
+ elink_lfa_reset(&sc->link_params, &sc->link_vars);
+ } else {
+ if (!CHIP_REV_IS_SLOW(sc)) {
+ PMD_DRV_LOG(WARN,
+ "Bootcode is missing - cannot reset link");
+ }
+ }
+}
+
+static void bnx2x_reset_port(struct bnx2x_softc *sc)
+{
+ int port = SC_PORT(sc);
+ uint32_t val;
+
+ /* reset physical Link */
+ bnx2x_link_reset(sc);
+
+ REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
+
+ /* Do not rcv packets to BRB */
+ REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
+ /* Do not direct rcv packets that are not for MCP to the BRB */
+ REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
+ NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+
+ /* Configure AEU */
+ REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
+
+ DELAY(100000);
+
+ /* Check for BRB port occupancy */
+ val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
+ if (val) {
+ PMD_DRV_LOG(DEBUG,
+ "BRB1 is not empty, %d blocks are occupied", val);
+ }
+}
+
+static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, phys_addr_t addr)
+{
+ int reg;
+ uint32_t wb_write[2];
+
+ reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
+
+ wb_write[0] = ONCHIP_ADDR1(addr);
+ wb_write[1] = ONCHIP_ADDR2(addr);
+ REG_WR_DMAE(sc, reg, wb_write, 2);
+}
+
+static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
+{
+ uint32_t i, base = FUNC_ILT_BASE(func);
+ for (i = base; i < base + ILT_PER_FUNC; i++) {
+ bnx2x_ilt_wr(sc, i, 0);
+ }
+}
+
+static void bnx2x_reset_func(struct bnx2x_softc *sc)
+{
+ struct bnx2x_fastpath *fp;
+ int port = SC_PORT(sc);
+ int func = SC_FUNC(sc);
+ int i;
+
+ /* Disable the function in the FW */
+ REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
+ REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
+ REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
+ REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
+
+ /* FP SBs */
+ FOR_EACH_ETH_QUEUE(sc, i) {
+ fp = &sc->fp[i];
+ REG_WR8(sc, BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
+ SB_DISABLED);
+ }
+
+ /* SP SB */
+ REG_WR8(sc, BAR_CSTRORM_INTMEM +
+ CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);
+
+ for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
+ REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
+ 0);
+ }
+
+ /* Configure IGU */
+ if (sc->devinfo.int_block == INT_BLOCK_HC) {
+ REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
+ REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
+ } else {
+ REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
+ REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
+ }
+
+ if (CNIC_LOADED(sc)) {
+/* Disable Timer scan */
+ REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
+/*
+ * Wait for at least 10ms and up to 2 second for the timers
+ * scan to complete
+ */
+ for (i = 0; i < 200; i++) {
+ DELAY(10000);
+ if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
+ break;
+ }
+ }
+
+ /* Clear ILT */
+ bnx2x_clear_func_ilt(sc, func);
+
+ /*
+ * Timers workaround bug for E2: if this is vnic-3,
+ * we need to set the entire ilt range for this timers.
+ */
+ if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
+ struct ilt_client_info ilt_cli;
+/* use dummy TM client */
+ memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
+ ilt_cli.start = 0;
+ ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
+ ilt_cli.client_num = ILT_CLIENT_TM;
+
+ ecore_ilt_boundry_init_op(sc, &ilt_cli, 0);
+ }
+
+ /* this assumes that reset_port() called before reset_func() */
+ if (!CHIP_IS_E1x(sc)) {
+ bnx2x_pf_disable(sc);
+ }
+
+ sc->dmae_ready = 0;
+}
+
+static void bnx2x_release_firmware(struct bnx2x_softc *sc)
+{
+ rte_free(sc->init_ops);
+ rte_free(sc->init_ops_offsets);
+ rte_free(sc->init_data);
+ rte_free(sc->iro_array);
+}
+
+static int bnx2x_init_firmware(struct bnx2x_softc *sc)
+{
+ uint32_t len, i;
+ uint8_t *p = sc->firmware;
+ uint32_t off[24];
+
+ for (i = 0; i < 24; ++i)
+ off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));
+
+ len = off[0];
+ sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+ if (!sc->init_ops)
+ goto alloc_failed;
+ bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);
+
+ len = off[2];
+ sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+ if (!sc->init_ops_offsets)
+ goto alloc_failed;
+ bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);
+
+ len = off[4];
+ sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+ if (!sc->init_data)
+ goto alloc_failed;
+ bnx2x_data_to_init_data(p + off[5], sc->init_data, len);
+
+ sc->tsem_int_table_data = p + off[7];
+ sc->tsem_pram_data = p + off[9];
+ sc->usem_int_table_data = p + off[11];
+ sc->usem_pram_data = p + off[13];
+ sc->csem_int_table_data = p + off[15];
+ sc->csem_pram_data = p + off[17];
+ sc->xsem_int_table_data = p + off[19];
+ sc->xsem_pram_data = p + off[21];
+
+ len = off[22];
+ sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
+ if (!sc->iro_array)
+ goto alloc_failed;
+ bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);
+
+ return 0;
+
+alloc_failed:
+ bnx2x_release_firmware(sc);
+ return -1;
+}
+
+static int cut_gzip_prefix(const uint8_t * zbuf, int len)
+{
+#define MIN_PREFIX_SIZE (10)
+
+ int n = MIN_PREFIX_SIZE;
+ uint16_t xlen;
+
+ if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
+ len <= MIN_PREFIX_SIZE) {
+ return -1;
+ }
+
+ /* optional extra fields are present */
+ if (zbuf[3] & 0x4) {
+ xlen = zbuf[13];
+ xlen <<= 8;
+ xlen += zbuf[12];
+
+ n += xlen;
+ }
+ /* file name is present */
+ if (zbuf[3] & 0x8) {
+ while ((zbuf[n++] != 0) && (n < len)) ;
+ }
+
+ return n;
+}
+
+static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
+{
+ int ret;
+ int data_begin = cut_gzip_prefix(zbuf, len);
+
+ PMD_DRV_LOG(DEBUG, "ecore_gunzip %d", len);
+
+ if (data_begin <= 0) {
+ PMD_DRV_LOG(NOTICE, "bad gzip prefix");
+ return -1;
+ }
+
+ memset(&zlib_stream, 0, sizeof(zlib_stream));
+ zlib_stream.next_in = zbuf + data_begin;
+ zlib_stream.avail_in = len - data_begin;
+ zlib_stream.next_out = sc->gz_buf;
+ zlib_stream.avail_out = FW_BUF_SIZE;
+
+ ret = inflateInit2(&zlib_stream, -MAX_WBITS);
+ if (ret != Z_OK) {
+ PMD_DRV_LOG(NOTICE, "zlib inflateInit2 error");
+ return ret;
+ }
+
+ ret = inflate(&zlib_stream, Z_FINISH);
+ if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
+ PMD_DRV_LOG(NOTICE, "zlib inflate error: %d %s", ret,
+ zlib_stream.msg);
+ }
+
+ sc->gz_outlen = zlib_stream.total_out;
+ if (sc->gz_outlen & 0x3) {
+ PMD_DRV_LOG(NOTICE, "firmware is not aligned. gz_outlen == %d",
+ sc->gz_outlen);
+ }
+ sc->gz_outlen >>= 2;
+
+ inflateEnd(&zlib_stream);
+
+ if (ret == Z_STREAM_END)
+ return 0;
+
+ return ret;
+}
+
+static void
+ecore_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
+ uint32_t addr, uint32_t len)
+{
+ bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
+}
+
+void
+ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
+ uint32_t * data)
+{
+ uint8_t i;
+ for (i = 0; i < size / 4; i++) {
+ REG_WR(sc, addr + (i * 4), data[i]);
+ }
+}
+
+static const char *get_ext_phy_type(uint32_t ext_phy_type)
+{
+ uint32_t phy_type_idx = ext_phy_type >> 8;
+ static const char *types[] =
+ { "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
+ "BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
+ "BNX2X-8727",
+ "BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
+ };
+
+ if (phy_type_idx < 12)
+ return types[phy_type_idx];
+ else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
+ return types[12];
+ else
+ return types[13];
+}
+
+static const char *get_state(uint32_t state)
+{
+ uint32_t state_idx = state >> 12;
+ static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
+ "OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
+ "CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
+ "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
+ "UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
+ };
+
+ if (state_idx <= 0xF)
+ return states[state_idx];
+ else
+ return states[0x10];
+}
+
+static const char *get_recovery_state(uint32_t state)
+{
+ static const char *states[] = { "NONE", "DONE", "INIT",
+ "WAIT", "FAILED", "NIC_LOADING"
+ };
+ return states[state];
+}
+
+static const char *get_rx_mode(uint32_t mode)
+{
+ static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
+ "PROMISC", "MAX_MULTICAST", "ERROR"
+ };
+
+ if (mode < 0x4)
+ return modes[mode];
+ else if (BNX2X_MAX_MULTICAST == mode)
+ return modes[4];
+ else
+ return modes[5];
+}
+
+#define BNX2X_INFO_STR_MAX 256
+static const char *get_bnx2x_flags(uint32_t flags)
+{
+ int i;
+ static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
+ "NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
+ "USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
+ "SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
+ };
+ static char flag_str[BNX2X_INFO_STR_MAX];
+ memset(flag_str, 0, BNX2X_INFO_STR_MAX);
+
+ for (i = 0; i < 5; i++)
+ if (flags & (1 << i)) {
+ strcat(flag_str, flag[i]);
+ flags ^= (1 << i);
+ }
+ if (flags) {
+ static char unknown[BNX2X_INFO_STR_MAX];
+ snprintf(unknown, 32, "Unknown flag mask %x", flags);
+ strcat(flag_str, unknown);
+ }
+ return flag_str;
+}
+
+/*
+ * Prints useful adapter info.
+ */
+void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
+{
+ int i = 0;
+ __rte_unused uint32_t ext_phy_type;
+
+ PMD_INIT_FUNC_TRACE();
+ if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
+ ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(REG_RD(sc,
+ sc->
+ devinfo.shmem_base
+ + offsetof(struct
+ shmem_region,
+ dev_info.port_hw_config
+ [0].external_phy_config)));
+ else
+ ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(REG_RD(sc,
+ sc->
+ devinfo.shmem_base
+ +
+ offsetof(struct
+ shmem_region,
+ dev_info.port_hw_config
+ [0].external_phy_config)));
+
+ PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
+ /* Hardware chip info. */
+ PMD_INIT_LOG(DEBUG, "%10s : %#08x\n", "ASIC", sc->devinfo.chip_id);
+ PMD_INIT_LOG(DEBUG, "%10s : %c%d\n", "Rev", (CHIP_REV(sc) >> 12) + 'A',
+ (CHIP_METAL(sc) >> 4));
+
+ /* Bus info. */
+ PMD_INIT_LOG(DEBUG, "%10s : %d, ", "Bus PCIe", sc->devinfo.pcie_link_width);
+ switch (sc->devinfo.pcie_link_speed) {
+ case 1:
+ PMD_INIT_LOG(DEBUG, "2.5 Gbps\n");
+ break;
+ case 2:
+ PMD_INIT_LOG(DEBUG, "5 Gbps\n");
+ break;
+ case 4:
+ PMD_INIT_LOG(DEBUG, "8 Gbps\n");
+ break;
+ default:
+ PMD_INIT_LOG(DEBUG, "Unknown link speed\n");
+ }
+
+ /* Device features. */
+ PMD_INIT_LOG(DEBUG, "%10s : ", "Flags");
+
+ /* Miscellaneous flags. */
+ if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
+ PMD_INIT_LOG(DEBUG, "MSI");
+ i++;
+ }
+
+ if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
+ if (i > 0)
+ PMD_INIT_LOG(DEBUG, "|");
+ PMD_INIT_LOG(DEBUG, "MSI-X");
+ i++;
+ }
+
+ PMD_INIT_LOG(DEBUG, "\n");
+
+ if (IS_PF(sc)) {
+ PMD_INIT_LOG(DEBUG, "\n%10s : ", "Queues");
+ switch (sc->sp->rss_rdata.rss_mode) {
+ case ETH_RSS_MODE_DISABLED:
+ PMD_INIT_LOG(DEBUG, "None\n");
+ break;
+ case ETH_RSS_MODE_REGULAR:
+ PMD_INIT_LOG(DEBUG, "RSS : %d\n", sc->num_queues);
+ break;
+ default:
+ PMD_INIT_LOG(DEBUG, "Unknown\n");
+ break;
+ }
+ }
+
+ /* Firmware versions and device features. */
+ PMD_INIT_LOG(DEBUG, "%10s : %d.%d.%d\n%10s : %s\n",
+ "Firmware",
+ BNX2X_5710_FW_MAJOR_VERSION,
+ BNX2X_5710_FW_MINOR_VERSION,
+ BNX2X_5710_FW_REVISION_VERSION,
+ "Bootcode", sc->devinfo.bc_ver_str);
+
+ PMD_INIT_LOG(DEBUG, "===================================\n");
+ PMD_INIT_LOG(DEBUG, "%10s : %u\n", "Bnx2x Func", sc->pcie_func);
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "DMAE Is",
+ (sc->dmae_ready ? "Ready" : "Not Ready"));
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "MF", (IS_MF(sc) ? "YES" : "NO"));
+ PMD_INIT_LOG(DEBUG, "%10s : %u\n", "MTU", sc->mtu);
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "PHY Type", get_ext_phy_type(ext_phy_type));
+ PMD_INIT_LOG(DEBUG, "%10s : ", "MAC Addr");
+ for (i = 0; i < 6; i++)
+ PMD_INIT_LOG(DEBUG, "%x%s", sc->link_params.mac_addr[i],
+ i < 5 ? ":" : "\n");
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "RX Mode", get_rx_mode(sc->rx_mode));
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "State", get_state(sc->state));
+ if (sc->recovery_state)
+ PMD_INIT_LOG(DEBUG, "%10s : %s\n", "Recovery",
+ get_recovery_state(sc->recovery_state));
+ PMD_INIT_LOG(DEBUG, "%10s : CQ = %lx, EQ = %lx\n", "SPQ Left",
+ sc->cq_spq_left, sc->eq_spq_left);
+ PMD_INIT_LOG(DEBUG, "%10s : %x\n", "Switch", sc->link_params.switch_cfg);
+ PMD_INIT_LOG(DEBUG, "===================================\n\n");
+}
git.droids-corp.org / dpdk.git / commitdiff