+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Minimal wrappers to allow compiling igb_uio on older kernels.
- */
-
-#ifndef RHEL_RELEASE_VERSION
-#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b))
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
-#define pci_cfg_access_lock pci_block_user_cfg_access
-#define pci_cfg_access_unlock pci_unblock_user_cfg_access
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
-#define HAVE_PTE_MASK_PAGE_IOMAP
-#endif
-
-#ifndef PCI_MSIX_ENTRY_SIZE
-#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
-#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
-#endif
-
-/*
- * for kernels < 2.6.38 and backported patch that moves MSI-X entry definition
- * to pci_regs.h Those kernels has PCI_MSIX_ENTRY_SIZE defined but not
- * PCI_MSIX_ENTRY_CTRL_MASKBIT
- */
-#ifndef PCI_MSIX_ENTRY_CTRL_MASKBIT
-#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) && \
- (!(defined(RHEL_RELEASE_CODE) && \
- RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5, 9)))
-
-static int pci_num_vf(struct pci_dev *dev)
-{
- struct iov {
- int pos;
- int nres;
- u32 cap;
- u16 ctrl;
- u16 total;
- u16 initial;
- u16 nr_virtfn;
- } *iov = (struct iov *)dev->sriov;
-
- if (!dev->is_physfn)
- return 0;
-
- return iov->nr_virtfn;
-}
-
-#endif /* < 2.6.34 */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \
- (!(defined(RHEL_RELEASE_CODE) && \
- RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4)))
-
-#define kstrtoul strict_strtoul
-
-#endif /* < 2.6.39 */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0) && \
- (!(defined(RHEL_RELEASE_CODE) && \
- RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 3)))
-
-/* Check if INTX works to control irq's.
- * Set's INTX_DISABLE flag and reads it back
- */
-static bool pci_intx_mask_supported(struct pci_dev *pdev)
-{
- bool mask_supported = false;
- uint16_t orig, new;
-
- pci_block_user_cfg_access(pdev);
- pci_read_config_word(pdev, PCI_COMMAND, &orig);
- pci_write_config_word(pdev, PCI_COMMAND,
- orig ^ PCI_COMMAND_INTX_DISABLE);
- pci_read_config_word(pdev, PCI_COMMAND, &new);
-
- if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
- dev_err(&pdev->dev, "Command register changed from "
- "0x%x to 0x%x: driver or hardware bug?\n", orig, new);
- } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
- mask_supported = true;
- pci_write_config_word(pdev, PCI_COMMAND, orig);
- }
- pci_unblock_user_cfg_access(pdev);
-
- return mask_supported;
-}
-
-static bool pci_check_and_mask_intx(struct pci_dev *pdev)
-{
- bool pending;
- uint32_t status;
-
- pci_block_user_cfg_access(pdev);
- pci_read_config_dword(pdev, PCI_COMMAND, &status);
-
- /* interrupt is not ours, goes to out */
- pending = (((status >> 16) & PCI_STATUS_INTERRUPT) != 0);
- if (pending) {
- uint16_t old, new;
-
- old = status;
- if (status != 0)
- new = old & (~PCI_COMMAND_INTX_DISABLE);
- else
- new = old | PCI_COMMAND_INTX_DISABLE;
-
- if (old != new)
- pci_write_config_word(pdev, PCI_COMMAND, new);
- }
- pci_unblock_user_cfg_access(pdev);
-
- return pending;
-}
-
-#endif /* < 3.3.0 */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 16, 0)
-#define HAVE_PCI_IS_BRIDGE_API 1
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-#define HAVE_MSI_LIST_IN_GENERIC_DEVICE 1
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 5, 0)
-#define HAVE_PCI_MSI_MASK_IRQ 1
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 8, 0)
-#define HAVE_ALLOC_IRQ_VECTORS 1
-#endif
-
-static inline bool igbuio_kernel_is_locked_down(void)
-{
-#ifdef CONFIG_LOCK_DOWN_KERNEL
-#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT
- return kernel_is_locked_down(NULL);
-#elif defined(CONFIG_EFI_SECURE_BOOT_LOCK_DOWN)
- return kernel_is_locked_down();
-#else
- return false;
-#endif
-#else
- return false;
-#endif
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*-
- * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/msi.h>
-#include <linux/version.h>
-#include <linux/slab.h>
-
-#include <rte_pci_dev_features.h>
-
-#include "compat.h"
-
-/**
- * A structure describing the private information for a uio device.
- */
-struct rte_uio_pci_dev {
- struct uio_info info;
- struct pci_dev *pdev;
- enum rte_intr_mode mode;
- atomic_t refcnt;
-};
-
-static int wc_activate;
-static char *intr_mode;
-static enum rte_intr_mode igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
-/* sriov sysfs */
-static ssize_t
-show_max_vfs(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- return snprintf(buf, 10, "%u\n", dev_num_vf(dev));
-}
-
-static ssize_t
-store_max_vfs(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- int err = 0;
- unsigned long max_vfs;
- struct pci_dev *pdev = to_pci_dev(dev);
-
- if (0 != kstrtoul(buf, 0, &max_vfs))
- return -EINVAL;
-
- if (0 == max_vfs)
- pci_disable_sriov(pdev);
- else if (0 == pci_num_vf(pdev))
- err = pci_enable_sriov(pdev, max_vfs);
- else /* do nothing if change max_vfs number */
- err = -EINVAL;
-
- return err ? err : count;
-}
-
-static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
-
-static struct attribute *dev_attrs[] = {
- &dev_attr_max_vfs.attr,
- NULL,
-};
-
-static const struct attribute_group dev_attr_grp = {
- .attrs = dev_attrs,
-};
-
-#ifndef HAVE_PCI_MSI_MASK_IRQ
-/*
- * It masks the msix on/off of generating MSI-X messages.
- */
-static void
-igbuio_msix_mask_irq(struct msi_desc *desc, s32 state)
-{
- u32 mask_bits = desc->masked;
- unsigned int offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
-
- if (state != 0)
- mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
- else
- mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
-
- if (mask_bits != desc->masked) {
- writel(mask_bits, desc->mask_base + offset);
- readl(desc->mask_base);
- desc->masked = mask_bits;
- }
-}
-
-/*
- * It masks the msi on/off of generating MSI messages.
- */
-static void
-igbuio_msi_mask_irq(struct pci_dev *pdev, struct msi_desc *desc, int32_t state)
-{
- u32 mask_bits = desc->masked;
- u32 offset = desc->irq - pdev->irq;
- u32 mask = 1 << offset;
-
- if (!desc->msi_attrib.maskbit)
- return;
-
- if (state != 0)
- mask_bits &= ~mask;
- else
- mask_bits |= mask;
-
- if (mask_bits != desc->masked) {
- pci_write_config_dword(pdev, desc->mask_pos, mask_bits);
- desc->masked = mask_bits;
- }
-}
-
-static void
-igbuio_mask_irq(struct pci_dev *pdev, enum rte_intr_mode mode, s32 irq_state)
-{
- struct msi_desc *desc;
- struct list_head *msi_list;
-
-#ifdef HAVE_MSI_LIST_IN_GENERIC_DEVICE
- msi_list = &pdev->dev.msi_list;
-#else
- msi_list = &pdev->msi_list;
-#endif
-
- if (mode == RTE_INTR_MODE_MSIX) {
- list_for_each_entry(desc, msi_list, list)
- igbuio_msix_mask_irq(desc, irq_state);
- } else if (mode == RTE_INTR_MODE_MSI) {
- list_for_each_entry(desc, msi_list, list)
- igbuio_msi_mask_irq(pdev, desc, irq_state);
- }
-}
-#endif
-
-/**
- * This is the irqcontrol callback to be registered to uio_info.
- * It can be used to disable/enable interrupt from user space processes.
- *
- * @param info
- * pointer to uio_info.
- * @param irq_state
- * state value. 1 to enable interrupt, 0 to disable interrupt.
- *
- * @return
- * - On success, 0.
- * - On failure, a negative value.
- */
-static int
-igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
-{
- struct rte_uio_pci_dev *udev = info->priv;
- struct pci_dev *pdev = udev->pdev;
-
-#ifdef HAVE_PCI_MSI_MASK_IRQ
- struct irq_data *irq = irq_get_irq_data(udev->info.irq);
-#endif
-
- pci_cfg_access_lock(pdev);
-
- if (udev->mode == RTE_INTR_MODE_MSIX || udev->mode == RTE_INTR_MODE_MSI) {
-#ifdef HAVE_PCI_MSI_MASK_IRQ
- if (irq_state == 1)
- pci_msi_unmask_irq(irq);
- else
- pci_msi_mask_irq(irq);
-#else
- igbuio_mask_irq(pdev, udev->mode, irq_state);
-#endif
- }
-
- if (udev->mode == RTE_INTR_MODE_LEGACY)
- pci_intx(pdev, !!irq_state);
-
- pci_cfg_access_unlock(pdev);
-
- return 0;
-}
-
-/**
- * This is interrupt handler which will check if the interrupt is for the right device.
- * If yes, disable it here and will be enable later.
- */
-static irqreturn_t
-igbuio_pci_irqhandler(int irq, void *dev_id)
-{
- struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
- struct uio_info *info = &udev->info;
-
- /* Legacy mode need to mask in hardware */
- if (udev->mode == RTE_INTR_MODE_LEGACY &&
- !pci_check_and_mask_intx(udev->pdev))
- return IRQ_NONE;
-
- uio_event_notify(info);
-
- /* Message signal mode, no share IRQ and automasked */
- return IRQ_HANDLED;
-}
-
-static int
-igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
-{
- int err = 0;
-#ifndef HAVE_ALLOC_IRQ_VECTORS
- struct msix_entry msix_entry;
-#endif
-
- switch (igbuio_intr_mode_preferred) {
- case RTE_INTR_MODE_MSIX:
- /* Only 1 msi-x vector needed */
-#ifndef HAVE_ALLOC_IRQ_VECTORS
- msix_entry.entry = 0;
- if (pci_enable_msix(udev->pdev, &msix_entry, 1) == 0) {
- dev_dbg(&udev->pdev->dev, "using MSI-X");
- udev->info.irq_flags = IRQF_NO_THREAD;
- udev->info.irq = msix_entry.vector;
- udev->mode = RTE_INTR_MODE_MSIX;
- break;
- }
-#else
- if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSIX) == 1) {
- dev_dbg(&udev->pdev->dev, "using MSI-X");
- udev->info.irq_flags = IRQF_NO_THREAD;
- udev->info.irq = pci_irq_vector(udev->pdev, 0);
- udev->mode = RTE_INTR_MODE_MSIX;
- break;
- }
-#endif
-
- /* falls through - to MSI */
- case RTE_INTR_MODE_MSI:
-#ifndef HAVE_ALLOC_IRQ_VECTORS
- if (pci_enable_msi(udev->pdev) == 0) {
- dev_dbg(&udev->pdev->dev, "using MSI");
- udev->info.irq_flags = IRQF_NO_THREAD;
- udev->info.irq = udev->pdev->irq;
- udev->mode = RTE_INTR_MODE_MSI;
- break;
- }
-#else
- if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSI) == 1) {
- dev_dbg(&udev->pdev->dev, "using MSI");
- udev->info.irq_flags = IRQF_NO_THREAD;
- udev->info.irq = pci_irq_vector(udev->pdev, 0);
- udev->mode = RTE_INTR_MODE_MSI;
- break;
- }
-#endif
- /* falls through - to INTX */
- case RTE_INTR_MODE_LEGACY:
- if (pci_intx_mask_supported(udev->pdev)) {
- dev_dbg(&udev->pdev->dev, "using INTX");
- udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
- udev->info.irq = udev->pdev->irq;
- udev->mode = RTE_INTR_MODE_LEGACY;
- break;
- }
- dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n");
- /* falls through - to no IRQ */
- case RTE_INTR_MODE_NONE:
- udev->mode = RTE_INTR_MODE_NONE;
- udev->info.irq = UIO_IRQ_NONE;
- break;
-
- default:
- dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
- igbuio_intr_mode_preferred);
- udev->info.irq = UIO_IRQ_NONE;
- err = -EINVAL;
- }
-
- if (udev->info.irq != UIO_IRQ_NONE)
- err = request_irq(udev->info.irq, igbuio_pci_irqhandler,
- udev->info.irq_flags, udev->info.name,
- udev);
- dev_info(&udev->pdev->dev, "uio device registered with irq %ld\n",
- udev->info.irq);
-
- return err;
-}
-
-static void
-igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
-{
- if (udev->info.irq) {
- free_irq(udev->info.irq, udev);
- udev->info.irq = 0;
- }
-
-#ifndef HAVE_ALLOC_IRQ_VECTORS
- if (udev->mode == RTE_INTR_MODE_MSIX)
- pci_disable_msix(udev->pdev);
- if (udev->mode == RTE_INTR_MODE_MSI)
- pci_disable_msi(udev->pdev);
-#else
- if (udev->mode == RTE_INTR_MODE_MSIX ||
- udev->mode == RTE_INTR_MODE_MSI)
- pci_free_irq_vectors(udev->pdev);
-#endif
-}
-
-
-/**
- * This gets called while opening uio device file.
- */
-static int
-igbuio_pci_open(struct uio_info *info, struct inode *inode)
-{
- struct rte_uio_pci_dev *udev = info->priv;
- struct pci_dev *dev = udev->pdev;
- int err;
-
- if (atomic_inc_return(&udev->refcnt) != 1)
- return 0;
-
- /* set bus master, which was cleared by the reset function */
- pci_set_master(dev);
-
- /* enable interrupts */
- err = igbuio_pci_enable_interrupts(udev);
- if (err) {
- atomic_dec(&udev->refcnt);
- dev_err(&dev->dev, "Enable interrupt fails\n");
- }
- return err;
-}
-
-static int
-igbuio_pci_release(struct uio_info *info, struct inode *inode)
-{
- struct rte_uio_pci_dev *udev = info->priv;
- struct pci_dev *dev = udev->pdev;
-
- if (atomic_dec_and_test(&udev->refcnt)) {
- /* disable interrupts */
- igbuio_pci_disable_interrupts(udev);
-
- /* stop the device from further DMA */
- pci_clear_master(dev);
- }
-
- return 0;
-}
-
-/* Remap pci resources described by bar #pci_bar in uio resource n. */
-static int
-igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
- int n, int pci_bar, const char *name)
-{
- unsigned long addr, len;
- void *internal_addr;
-
- if (n >= ARRAY_SIZE(info->mem))
- return -EINVAL;
-
- addr = pci_resource_start(dev, pci_bar);
- len = pci_resource_len(dev, pci_bar);
- if (addr == 0 || len == 0)
- return -1;
- if (wc_activate == 0) {
- internal_addr = ioremap(addr, len);
- if (internal_addr == NULL)
- return -1;
- } else {
- internal_addr = NULL;
- }
- info->mem[n].name = name;
- info->mem[n].addr = addr;
- info->mem[n].internal_addr = internal_addr;
- info->mem[n].size = len;
- info->mem[n].memtype = UIO_MEM_PHYS;
- return 0;
-}
-
-/* Get pci port io resources described by bar #pci_bar in uio resource n. */
-static int
-igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
- int n, int pci_bar, const char *name)
-{
- unsigned long addr, len;
-
- if (n >= ARRAY_SIZE(info->port))
- return -EINVAL;
-
- addr = pci_resource_start(dev, pci_bar);
- len = pci_resource_len(dev, pci_bar);
- if (addr == 0 || len == 0)
- return -EINVAL;
-
- info->port[n].name = name;
- info->port[n].start = addr;
- info->port[n].size = len;
- info->port[n].porttype = UIO_PORT_X86;
-
- return 0;
-}
-
-/* Unmap previously ioremap'd resources */
-static void
-igbuio_pci_release_iomem(struct uio_info *info)
-{
- int i;
-
- for (i = 0; i < MAX_UIO_MAPS; i++) {
- if (info->mem[i].internal_addr)
- iounmap(info->mem[i].internal_addr);
- }
-}
-
-static int
-igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
-{
- int i, iom, iop, ret;
- unsigned long flags;
- static const char *bar_names[PCI_STD_RESOURCE_END + 1] = {
- "BAR0",
- "BAR1",
- "BAR2",
- "BAR3",
- "BAR4",
- "BAR5",
- };
-
- iom = 0;
- iop = 0;
-
- for (i = 0; i < ARRAY_SIZE(bar_names); i++) {
- if (pci_resource_len(dev, i) != 0 &&
- pci_resource_start(dev, i) != 0) {
- flags = pci_resource_flags(dev, i);
- if (flags & IORESOURCE_MEM) {
- ret = igbuio_pci_setup_iomem(dev, info, iom,
- i, bar_names[i]);
- if (ret != 0)
- return ret;
- iom++;
- } else if (flags & IORESOURCE_IO) {
- ret = igbuio_pci_setup_ioport(dev, info, iop,
- i, bar_names[i]);
- if (ret != 0)
- return ret;
- iop++;
- }
- }
- }
-
- return (iom != 0 || iop != 0) ? ret : -ENOENT;
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
-static int __devinit
-#else
-static int
-#endif
-igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct rte_uio_pci_dev *udev;
- dma_addr_t map_dma_addr;
- void *map_addr;
- int err;
-
-#ifdef HAVE_PCI_IS_BRIDGE_API
- if (pci_is_bridge(dev)) {
- dev_warn(&dev->dev, "Ignoring PCI bridge device\n");
- return -ENODEV;
- }
-#endif
-
- udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
- if (!udev)
- return -ENOMEM;
-
- /*
- * enable device: ask low-level code to enable I/O and
- * memory
- */
- err = pci_enable_device(dev);
- if (err != 0) {
- dev_err(&dev->dev, "Cannot enable PCI device\n");
- goto fail_free;
- }
-
- /* enable bus mastering on the device */
- pci_set_master(dev);
-
- /* remap IO memory */
- err = igbuio_setup_bars(dev, &udev->info);
- if (err != 0)
- goto fail_release_iomem;
-
- /* set 64-bit DMA mask */
- err = pci_set_dma_mask(dev, DMA_BIT_MASK(64));
- if (err != 0) {
- dev_err(&dev->dev, "Cannot set DMA mask\n");
- goto fail_release_iomem;
- }
-
- err = pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64));
- if (err != 0) {
- dev_err(&dev->dev, "Cannot set consistent DMA mask\n");
- goto fail_release_iomem;
- }
-
- /* fill uio infos */
- udev->info.name = "igb_uio";
- udev->info.version = "0.1";
- udev->info.irqcontrol = igbuio_pci_irqcontrol;
- udev->info.open = igbuio_pci_open;
- udev->info.release = igbuio_pci_release;
- udev->info.priv = udev;
- udev->pdev = dev;
- atomic_set(&udev->refcnt, 0);
-
- err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
- if (err != 0)
- goto fail_release_iomem;
-
- /* register uio driver */
- err = uio_register_device(&dev->dev, &udev->info);
- if (err != 0)
- goto fail_remove_group;
-
- pci_set_drvdata(dev, udev);
-
- /*
- * Doing a harmless dma mapping for attaching the device to
- * the iommu identity mapping if kernel boots with iommu=pt.
- * Note this is not a problem if no IOMMU at all.
- */
- map_addr = dma_alloc_coherent(&dev->dev, 1024, &map_dma_addr,
- GFP_KERNEL);
- if (map_addr)
- memset(map_addr, 0, 1024);
-
- if (!map_addr)
- dev_info(&dev->dev, "dma mapping failed\n");
- else {
- dev_info(&dev->dev, "mapping 1K dma=%#llx host=%p\n",
- (unsigned long long)map_dma_addr, map_addr);
-
- dma_free_coherent(&dev->dev, 1024, map_addr, map_dma_addr);
- dev_info(&dev->dev, "unmapping 1K dma=%#llx host=%p\n",
- (unsigned long long)map_dma_addr, map_addr);
- }
-
- return 0;
-
-fail_remove_group:
- sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
-fail_release_iomem:
- igbuio_pci_release_iomem(&udev->info);
- pci_disable_device(dev);
-fail_free:
- kfree(udev);
-
- return err;
-}
-
-static void
-igbuio_pci_remove(struct pci_dev *dev)
-{
- struct rte_uio_pci_dev *udev = pci_get_drvdata(dev);
-
- igbuio_pci_release(&udev->info, NULL);
-
- sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
- uio_unregister_device(&udev->info);
- igbuio_pci_release_iomem(&udev->info);
- pci_disable_device(dev);
- pci_set_drvdata(dev, NULL);
- kfree(udev);
-}
-
-static int
-igbuio_config_intr_mode(char *intr_str)
-{
- if (!intr_str) {
- pr_info("Use MSIX interrupt by default\n");
- return 0;
- }
-
- if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) {
- igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
- pr_info("Use MSIX interrupt\n");
- } else if (!strcmp(intr_str, RTE_INTR_MODE_MSI_NAME)) {
- igbuio_intr_mode_preferred = RTE_INTR_MODE_MSI;
- pr_info("Use MSI interrupt\n");
- } else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) {
- igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY;
- pr_info("Use legacy interrupt\n");
- } else {
- pr_info("Error: bad parameter - %s\n", intr_str);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct pci_driver igbuio_pci_driver = {
- .name = "igb_uio",
- .id_table = NULL,
- .probe = igbuio_pci_probe,
- .remove = igbuio_pci_remove,
-};
-
-static int __init
-igbuio_pci_init_module(void)
-{
- int ret;
-
- if (igbuio_kernel_is_locked_down()) {
- pr_err("Not able to use module, kernel lock down is enabled\n");
- return -EINVAL;
- }
-
- if (wc_activate != 0)
- pr_info("wc_activate is set\n");
-
- ret = igbuio_config_intr_mode(intr_mode);
- if (ret < 0)
- return ret;
-
- return pci_register_driver(&igbuio_pci_driver);
-}
-
-static void __exit
-igbuio_pci_exit_module(void)
-{
- pci_unregister_driver(&igbuio_pci_driver);
-}
-
-module_init(igbuio_pci_init_module);
-module_exit(igbuio_pci_exit_module);
-
-module_param(intr_mode, charp, S_IRUGO);
-MODULE_PARM_DESC(intr_mode,
-"igb_uio interrupt mode (default=msix):\n"
-" " RTE_INTR_MODE_MSIX_NAME " Use MSIX interrupt\n"
-" " RTE_INTR_MODE_MSI_NAME " Use MSI interrupt\n"
-" " RTE_INTR_MODE_LEGACY_NAME " Use Legacy interrupt\n"
-"\n");
-
-module_param(wc_activate, int, 0);
-MODULE_PARM_DESC(wc_activate,
-"Activate support for write combining (WC) (default=0)\n"
-" 0 - disable\n"
-" other - enable\n");
-
-MODULE_DESCRIPTION("UIO driver for Intel IGB PCI cards");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Intel Corporation");
git.droids-corp.org / dpdk.git / commitdiff