app/testpmd: use consistent vdev names

The vdev eth_bond has been renamed to net_bond.
testpmd is creating a bonding device with the old prefix.
It is changed for consistency.

The script test-null.sh was failing because using the old name
for the null vdev.

Fixes also the bonding and testpmd doc.

Fixes: 2f45703c17ac ("drivers: make driver names consistent")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a1da8b8..08fe63f 100644 (file)
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -4507,7 +4507,7 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
                return;
        }
 
-       snprintf(ethdev_name, RTE_ETH_NAME_MAX_LEN, "eth_bond_testpmd_%d",
+       snprintf(ethdev_name, RTE_ETH_NAME_MAX_LEN, "net_bond_testpmd_%d",
                        bond_dev_num++);
 
        /* Create a new bonded device. */

diff --git a/doc/guides/contributing/documentation.rst b/doc/guides/contributing/documentation.rst
index 6d4c277..2cfb1a2 100644 (file)
--- a/doc/guides/contributing/documentation.rst
+++ b/doc/guides/contributing/documentation.rst
@@ -458,8 +458,8 @@ Code and Literal block sections
   For long literal lines that exceed that limit try to wrap the text at sensible locations.
   For example a long command line could be documented like this and still work if copied directly from the docs::
 
-     build/app/testpmd -c7 -n3 --vdev=eth_pcap0,iface=eth0     \
-                               --vdev=eth_pcap1,iface=eth1     \
+     build/app/testpmd -c7 -n3 --vdev=net_pcap0,iface=eth0     \
+                               --vdev=net_pcap1,iface=eth1     \
                                -- -i --nb-cores=2 --nb-ports=2 \
                                   --total-num-mbufs=2048
 

diff --git a/doc/guides/howto/lm_bond_virtio_sriov.rst b/doc/guides/howto/lm_bond_virtio_sriov.rst
index 9bc3450..fe9803e 100644 (file)
--- a/doc/guides/howto/lm_bond_virtio_sriov.rst
+++ b/doc/guides/howto/lm_bond_virtio_sriov.rst
@@ -142,7 +142,7 @@ Bonding is port 2 (P2).
 .. code-block:: console
 
    testpmd> create bonded device 1 0
-   Created new bonded device eth_bond_testpmd_0 on (port 2).
+   Created new bonded device net_bond_testpmd_0 on (port 2).
    testpmd> add bonding slave 0 2
    testpmd> add bonding slave 1 2
    testpmd> show bonding config 2

diff --git a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
index 01ddcb9..65813c9 100644 (file)
--- a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
+++ b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
@@ -356,7 +356,7 @@ Using Link Bonding Devices from the EAL Command Line
 
 Link bonding devices can be created at application startup time using the
 ``--vdev`` EAL command line option. The device name must start with the
-eth_bond prefix followed by numbers or letters. The name must be unique for
+net_bond prefix followed by numbers or letters. The name must be unique for
 each device. Each device can have multiple options arranged in a comma
 separated list. Multiple devices definitions can be arranged by calling the
 ``--vdev`` option multiple times.
@@ -365,7 +365,7 @@ Device names and bonding options must be separated by commas as shown below:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -c f -n 4 --vdev 'eth_bond0,bond_opt0=..,bond opt1=..'--vdev 'eth_bond1,bond _opt0=..,bond_opt1=..'
+    $RTE_TARGET/app/testpmd -c f -n 4 --vdev 'net_bond0,bond_opt0=..,bond opt1=..'--vdev 'net_bond1,bond _opt0=..,bond_opt1=..'
 
 Link Bonding EAL Options
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -373,7 +373,7 @@ Link Bonding EAL Options
 There are multiple ways of definitions that can be assessed and combined as
 long as the following two rules are respected:
 
-*   A unique device name, in the format of eth_bondX is provided,
+*   A unique device name, in the format of net_bondX is provided,
     where X can be any combination of numbers and/or letters,
     and the name is no greater than 32 characters long.
 
@@ -465,22 +465,22 @@ Create a bonded device in round robin mode with two slaves specified by their PC
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'eth_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
 
 Create a bonded device in round robin mode with two slaves specified by their PCI address and an overriding MAC address:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'eth_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
 
 Create a bonded device in active backup mode with two slaves specified, and a primary slave specified by their PCI addresses:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'eth_bond0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'net_bond0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
 
 Create a bonded device in balance mode with two slaves specified by their PCI addresses, and a transmission policy of layer 3 + 4 forwarding:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'eth_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -c '0xf' -n 4 --vdev 'net_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained

diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 55c7ac0..fe6b7f1 100644 (file)
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -130,7 +130,7 @@ See the DPDK Getting Started Guides for more information on these options.
 
     For example::
 
-       --vdev 'eth_pcap0,rx_pcap=input.pcap,tx_pcap=output.pcap'
+       --vdev 'net_pcap0,rx_pcap=input.pcap,tx_pcap=output.pcap'
 
 *   ``--base-virtaddr``
 

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index f87e0c2..5caca30 100644 (file)
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1041,14 +1041,14 @@ For example, to attach a port created by pcap PMD.
 
 .. code-block:: console
 
-   testpmd> port attach eth_pcap0
+   testpmd> port attach net_pcap0
    Attaching a new port...
-   PMD: Initializing pmd_pcap for eth_pcap0
+   PMD: Initializing pmd_pcap for net_pcap0
    PMD: Creating pcap-backed ethdev on numa socket 0
    Port 0 is attached. Now total ports is 1
    Done
 
-In this case, identifier is ``eth_pcap0``.
+In this case, identifier is ``net_pcap0``.
 This identifier format is the same as ``--vdev`` format of DPDK applications.
 
 For example, to re-attach a bonded port which has been previously detached,
@@ -1056,10 +1056,10 @@ the mode and slave parameters must be given.
 
 .. code-block:: console
 
-   testpmd> port attach eth_bond_0,mode=0,slave=1
+   testpmd> port attach net_bond_0,mode=0,slave=1
    Attaching a new port...
-   EAL: Initializing pmd_bond for eth_bond_0
-   EAL: Create bonded device eth_bond_0 on port 0 in mode 0 on socket 0.
+   EAL: Initializing pmd_bond for net_bond_0
+   EAL: Create bonded device net_bond_0 on port 0 in mode 0 on socket 0.
    Port 0 is attached. Now total ports is 1
    Done
 
@@ -1107,7 +1107,7 @@ For example, to detach a virtual device port 0.
    testpmd> port detach 0
    Detaching a port...
    PMD: Closing pcap ethdev on numa socket 0
-   Port 'eth_pcap0' is detached. Now total ports is 0
+   Port 'net_pcap0' is detached. Now total ports is 0
    Done
 
 To remove a pci device completely from the system, first detach the port from testpmd.

diff --git a/scripts/test-null.sh b/scripts/test-null.sh
index 32a47b1..30cd0b0 100755 (executable)
--- a/scripts/test-null.sh
+++ b/scripts/test-null.sh
@@ -41,5 +41,5 @@ fi
 
 (sleep 1 && echo stop) |
 $build/app/testpmd -c $coremask -n 1 --no-huge \
-       $pmd --vdev eth_null1 --vdev eth_null2 -- \
+       $pmd --vdev net_null1 --vdev net_null2 -- \
        --total-num-mbufs=2048 -ia