-------------------
Supports packet type parsing and returns a list of supported types.
+Allows application to set ptypes it is interested in.
-* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``.
-* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``.
+* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
+* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``,
+ ``rte_eth_dev_set_ptypes()``, ``dev_ptypes_set``.
+* **[provides] mbuf**: ``mbuf.packet_type``.
.. _nic_features_timesync:
* Rx metadata is delivered to host via a dynamic field of ``rte_mbuf`` with
PKT_RX_DYNF_METADATA.
+* **Added ethdev API to set supported packet types**
+
+ * Added new API ``rte_eth_dev_set_ptypes`` that allows an application to
+ inform PMD about about reduced range of packet types to handle.
+ * This scheme will allow PMDs to avoid lookup to internal ptype table on Rx
+ and thereby improve Rx performance if application wishes do so.
+
* **Updated the enic driver.**
* Added support for Geneve with options offload.
See :doc:`../prog_guide/lto` for more information:
+
Removed Items
-------------
return j;
}
+int
+rte_eth_dev_set_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, unsigned int num)
+{
+ const uint32_t valid_ptype_masks[] = {
+ RTE_PTYPE_L2_MASK,
+ RTE_PTYPE_L3_MASK,
+ RTE_PTYPE_L4_MASK,
+ RTE_PTYPE_TUNNEL_MASK,
+ RTE_PTYPE_INNER_L2_MASK,
+ RTE_PTYPE_INNER_L3_MASK,
+ RTE_PTYPE_INNER_L4_MASK,
+ };
+ const uint32_t *all_ptypes;
+ struct rte_eth_dev *dev;
+ uint32_t unused_mask;
+ unsigned int i, j;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (num > 0 && set_ptypes == NULL)
+ return -EINVAL;
+
+ if (*dev->dev_ops->dev_supported_ptypes_get == NULL ||
+ *dev->dev_ops->dev_ptypes_set == NULL) {
+ ret = 0;
+ goto ptype_unknown;
+ }
+
+ if (ptype_mask == 0) {
+ ret = (*dev->dev_ops->dev_ptypes_set)(dev,
+ ptype_mask);
+ goto ptype_unknown;
+ }
+
+ unused_mask = ptype_mask;
+ for (i = 0; i < RTE_DIM(valid_ptype_masks); i++) {
+ uint32_t mask = ptype_mask & valid_ptype_masks[i];
+ if (mask && mask != valid_ptype_masks[i]) {
+ ret = -EINVAL;
+ goto ptype_unknown;
+ }
+ unused_mask &= ~valid_ptype_masks[i];
+ }
+
+ if (unused_mask) {
+ ret = -EINVAL;
+ goto ptype_unknown;
+ }
+
+ all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
+ if (all_ptypes == NULL) {
+ ret = 0;
+ goto ptype_unknown;
+ }
+
+ /*
+ * Accommodate as many set_ptypes as possible. If the supplied
+ * set_ptypes array is insufficient fill it partially.
+ */
+ for (i = 0, j = 0; set_ptypes != NULL &&
+ (all_ptypes[i] != RTE_PTYPE_UNKNOWN); ++i) {
+ if (ptype_mask & all_ptypes[i]) {
+ if (j < num - 1) {
+ set_ptypes[j] = all_ptypes[i];
+ j++;
+ continue;
+ }
+ break;
+ }
+ }
+
+ if (set_ptypes != NULL && j < num)
+ set_ptypes[j] = RTE_PTYPE_UNKNOWN;
+
+ return (*dev->dev_ops->dev_ptypes_set)(dev, ptype_mask);
+
+ptype_unknown:
+ if (num > 0)
+ set_ptypes[0] = RTE_PTYPE_UNKNOWN;
+
+ return ret;
+}
+
int
rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
{
return 0;
}
-
int
rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu)
{
*/
int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *ptypes, int num);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Inform Ethernet device about reduced range of packet types to handle.
+ *
+ * Application can use this function to set only specific ptypes that it's
+ * interested. This information can be used by the PMD to optimize Rx path.
+ *
+ * The function accepts an array `set_ptypes` allocated by the caller to
+ * store the packet types set by the driver, the last element of the array
+ * is set to RTE_PTYPE_UNKNOWN. The size of the `set_ptype` array should be
+ * `rte_eth_dev_get_supported_ptypes() + 1` else it might only be filled
+ * partially.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ptype_mask
+ * The ptype family that application is interested in should be bitwise OR of
+ * RTE_PTYPE_*_MASK or 0.
+ * @param set_ptypes
+ * An array pointer to store set packet types, allocated by caller. The
+ * function marks the end of array with RTE_PTYPE_UNKNOWN.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the
+ * set ptypes.
+ * @return
+ * - (0) if Success.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *ptype_mask* is invalid (or) set_ptypes is NULL and
+ * num > 0.
+ */
+__rte_experimental
+int rte_eth_dev_set_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, unsigned int num);
/**
* Retrieve the MTU of an Ethernet device.
typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
/**< @internal Get supported ptypes of an Ethernet device. */
+/**
+ * @internal
+ * Inform Ethernet device about reduced range of packet types to handle.
+ *
+ * @param dev
+ * The Ethernet device identifier.
+ * @param ptype_mask
+ * The ptype family that application is interested in should be bitwise OR of
+ * RTE_PTYPE_*_MASK or 0.
+ * @return
+ * - (0) if Success.
+ */
+typedef int (*eth_dev_ptypes_set_t)(struct rte_eth_dev *dev,
+ uint32_t ptype_mask);
+
typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
uint16_t queue_id);
/**< @internal Start rx and tx of a queue of an Ethernet device. */
eth_fw_version_get_t fw_version_get; /**< Get firmware version. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
+ eth_dev_ptypes_set_t dev_ptypes_set;
+ /**< Inform Ethernet device about reduced range of packet types to handle. */
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
rte_flow_dynf_metadata_offs;
rte_flow_dynf_metadata_mask;
rte_flow_dynf_metadata_register;
+ rte_eth_dev_set_ptypes;
};
git.droids-corp.org / dpdk.git / commitdiff