--- /dev/null
+# BSD LICENSE
+#
+# Copyright(c) 2016 NXP. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of NXP nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_mempool_dpaa2.a
+
+ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
+CFLAGS += -O0 -g
+CFLAGS += "-Wno-error"
+else
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+endif
+
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+
+# versioning export map
+EXPORT_MAP := rte_mempool_dpaa2_version.map
+
+# Lbrary version
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL) += dpaa2_hw_mempool.c
+
+LDLIBS += -lrte_bus_fslmc
+
+include $(RTE_SDK)/mk/rte.lib.mk
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <errno.h>
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+#include <rte_kvargs.h>
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+
+#include <fslmc_logs.h>
+#include <mc/fsl_dpbp.h>
+#include <portal/dpaa2_hw_pvt.h>
+#include <portal/dpaa2_hw_dpio.h>
+#include "dpaa2_hw_mempool.h"
+
+struct dpaa2_bp_info rte_dpaa2_bpid_info[MAX_BPID];
+static struct dpaa2_bp_list *h_bp_list;
+
+static int
+rte_hw_mbuf_create_pool(struct rte_mempool *mp)
+{
+ struct dpaa2_bp_list *bp_list;
+ struct dpaa2_dpbp_dev *avail_dpbp;
+ struct dpbp_attr dpbp_attr;
+ uint32_t bpid;
+ int ret, p_ret;
+
+ avail_dpbp = dpaa2_alloc_dpbp_dev();
+
+ if (!avail_dpbp) {
+ PMD_DRV_LOG(ERR, "DPAA2 resources not available");
+ return -ENOENT;
+ }
+
+ if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+ ret = dpaa2_affine_qbman_swp();
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+ return ret;
+ }
+ }
+
+ ret = dpbp_enable(&avail_dpbp->dpbp, CMD_PRI_LOW, avail_dpbp->token);
+ if (ret != 0) {
+ PMD_INIT_LOG(ERR, "Resource enable failure with"
+ " err code: %d\n", ret);
+ return ret;
+ }
+
+ ret = dpbp_get_attributes(&avail_dpbp->dpbp, CMD_PRI_LOW,
+ avail_dpbp->token, &dpbp_attr);
+ if (ret != 0) {
+ PMD_INIT_LOG(ERR, "Resource read failure with"
+ " err code: %d\n", ret);
+ p_ret = ret;
+ ret = dpbp_disable(&avail_dpbp->dpbp, CMD_PRI_LOW,
+ avail_dpbp->token);
+ return p_ret;
+ }
+
+ /* Allocate the bp_list which will be added into global_bp_list */
+ bp_list = rte_malloc(NULL, sizeof(struct dpaa2_bp_list),
+ RTE_CACHE_LINE_SIZE);
+ if (!bp_list) {
+ PMD_INIT_LOG(ERR, "No heap memory available");
+ return -ENOMEM;
+ }
+
+ /* Set parameters of buffer pool list */
+ bp_list->buf_pool.num_bufs = mp->size;
+ bp_list->buf_pool.size = mp->elt_size
+ - sizeof(struct rte_mbuf) - rte_pktmbuf_priv_size(mp);
+ bp_list->buf_pool.bpid = dpbp_attr.bpid;
+ bp_list->buf_pool.h_bpool_mem = NULL;
+ bp_list->buf_pool.dpbp_node = avail_dpbp;
+ /* Identification for our offloaded pool_data structure */
+ bp_list->dpaa2_ops_index = mp->ops_index;
+ bp_list->next = h_bp_list;
+ bp_list->mp = mp;
+
+ bpid = dpbp_attr.bpid;
+
+ rte_dpaa2_bpid_info[bpid].meta_data_size = sizeof(struct rte_mbuf)
+ + rte_pktmbuf_priv_size(mp);
+ rte_dpaa2_bpid_info[bpid].bp_list = bp_list;
+ rte_dpaa2_bpid_info[bpid].bpid = bpid;
+
+ mp->pool_data = (void *)&rte_dpaa2_bpid_info[bpid];
+
+ PMD_INIT_LOG(DEBUG, "BP List created for bpid =%d", dpbp_attr.bpid);
+
+ h_bp_list = bp_list;
+ return 0;
+}
+
+static void
+rte_hw_mbuf_free_pool(struct rte_mempool *mp)
+{
+ struct dpaa2_bp_info *bpinfo;
+ struct dpaa2_bp_list *bp;
+ struct dpaa2_dpbp_dev *dpbp_node;
+
+ if (!mp->pool_data) {
+ PMD_DRV_LOG(ERR, "Not a valid dpaa22 pool");
+ return;
+ }
+
+ bpinfo = (struct dpaa2_bp_info *)mp->pool_data;
+ bp = bpinfo->bp_list;
+ dpbp_node = bp->buf_pool.dpbp_node;
+
+ dpbp_disable(&(dpbp_node->dpbp), CMD_PRI_LOW, dpbp_node->token);
+
+ if (h_bp_list == bp) {
+ h_bp_list = h_bp_list->next;
+ } else { /* if it is not the first node */
+ struct dpaa2_bp_list *prev = h_bp_list, *temp;
+ temp = h_bp_list->next;
+ while (temp) {
+ if (temp == bp) {
+ prev->next = temp->next;
+ free(bp);
+ break;
+ }
+ prev = temp;
+ temp = temp->next;
+ }
+ }
+
+ dpaa2_free_dpbp_dev(dpbp_node);
+}
+
+static void
+rte_dpaa2_mbuf_release(struct rte_mempool *pool __rte_unused,
+ void * const *obj_table,
+ uint32_t bpid,
+ uint32_t meta_data_size,
+ int count)
+{
+ struct qbman_release_desc releasedesc;
+ struct qbman_swp *swp;
+ int ret;
+ int i, n;
+ uint64_t bufs[DPAA2_MBUF_MAX_ACQ_REL];
+
+ if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+ ret = dpaa2_affine_qbman_swp();
+ if (ret != 0) {
+ RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
+ return;
+ }
+ }
+ swp = DPAA2_PER_LCORE_PORTAL;
+
+ /* Create a release descriptor required for releasing
+ * buffers into QBMAN
+ */
+ qbman_release_desc_clear(&releasedesc);
+ qbman_release_desc_set_bpid(&releasedesc, bpid);
+
+ n = count % DPAA2_MBUF_MAX_ACQ_REL;
+ if (unlikely(!n))
+ goto aligned;
+
+ /* convert mbuf to buffers for the remainder */
+ for (i = 0; i < n ; i++) {
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+ bufs[i] = (uint64_t)rte_mempool_virt2phy(pool, obj_table[i])
+ + meta_data_size;
+#else
+ bufs[i] = (uint64_t)obj_table[i] + meta_data_size;
+#endif
+ }
+
+ /* feed them to bman */
+ do {
+ ret = qbman_swp_release(swp, &releasedesc, bufs, n);
+ } while (ret == -EBUSY);
+
+aligned:
+ /* if there are more buffers to free */
+ while (n < count) {
+ /* convert mbuf to buffers */
+ for (i = 0; i < DPAA2_MBUF_MAX_ACQ_REL; i++) {
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+ bufs[i] = (uint64_t)
+ rte_mempool_virt2phy(pool, obj_table[n + i])
+ + meta_data_size;
+#else
+ bufs[i] = (uint64_t)obj_table[n + i] + meta_data_size;
+#endif
+ }
+
+ do {
+ ret = qbman_swp_release(swp, &releasedesc, bufs,
+ DPAA2_MBUF_MAX_ACQ_REL);
+ } while (ret == -EBUSY);
+ n += DPAA2_MBUF_MAX_ACQ_REL;
+ }
+}
+
+int
+rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
+ void **obj_table, unsigned int count)
+{
+#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
+ static int alloc;
+#endif
+ struct qbman_swp *swp;
+ uint16_t bpid;
+ uint64_t bufs[DPAA2_MBUF_MAX_ACQ_REL];
+ int i, ret;
+ unsigned int n = 0;
+ struct dpaa2_bp_info *bp_info;
+
+ bp_info = mempool_to_bpinfo(pool);
+
+ if (!(bp_info->bp_list)) {
+ RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured\n");
+ return -ENOENT;
+ }
+
+ bpid = bp_info->bpid;
+
+ if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+ ret = dpaa2_affine_qbman_swp();
+ if (ret != 0) {
+ RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
+ return ret;
+ }
+ }
+ swp = DPAA2_PER_LCORE_PORTAL;
+
+ while (n < count) {
+ /* Acquire is all-or-nothing, so we drain in 7s,
+ * then the remainder.
+ */
+ if ((count - n) > DPAA2_MBUF_MAX_ACQ_REL) {
+ ret = qbman_swp_acquire(swp, bpid, bufs,
+ DPAA2_MBUF_MAX_ACQ_REL);
+ } else {
+ ret = qbman_swp_acquire(swp, bpid, bufs,
+ count - n);
+ }
+ /* In case of less than requested number of buffers available
+ * in pool, qbman_swp_acquire returns 0
+ */
+ if (ret <= 0) {
+ PMD_TX_LOG(ERR, "Buffer acquire failed with"
+ " err code: %d", ret);
+ /* The API expect the exact number of requested bufs */
+ /* Releasing all buffers allocated */
+ rte_dpaa2_mbuf_release(pool, obj_table, bpid,
+ bp_info->meta_data_size, n);
+ return ret;
+ }
+ /* assigning mbuf from the acquired objects */
+ for (i = 0; (i < ret) && bufs[i]; i++) {
+ DPAA2_MODIFY_IOVA_TO_VADDR(bufs[i], uint64_t);
+ obj_table[n] = (struct rte_mbuf *)
+ (bufs[i] - bp_info->meta_data_size);
+ PMD_TX_LOG(DEBUG, "Acquired %p address %p from BMAN",
+ (void *)bufs[i], (void *)obj_table[n]);
+ n++;
+ }
+ }
+
+#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
+ alloc += n;
+ PMD_TX_LOG(DEBUG, "Total = %d , req = %d done = %d",
+ alloc, count, n);
+#endif
+ return 0;
+}
+
+static int
+rte_hw_mbuf_free_bulk(struct rte_mempool *pool,
+ void * const *obj_table, unsigned int n)
+{
+ struct dpaa2_bp_info *bp_info;
+
+ bp_info = mempool_to_bpinfo(pool);
+ if (!(bp_info->bp_list)) {
+ RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured");
+ return -ENOENT;
+ }
+ rte_dpaa2_mbuf_release(pool, obj_table, bp_info->bpid,
+ bp_info->meta_data_size, n);
+
+ return 0;
+}
+
+static unsigned int
+rte_hw_mbuf_get_count(const struct rte_mempool *mp)
+{
+ int ret;
+ unsigned int num_of_bufs = 0;
+ struct dpaa2_bp_info *bp_info;
+ struct dpaa2_dpbp_dev *dpbp_node;
+
+ if (!mp || !mp->pool_data) {
+ RTE_LOG(ERR, PMD, "Invalid mempool provided");
+ return 0;
+ }
+
+ bp_info = (struct dpaa2_bp_info *)mp->pool_data;
+ dpbp_node = bp_info->bp_list->buf_pool.dpbp_node;
+
+ ret = dpbp_get_num_free_bufs(&dpbp_node->dpbp, CMD_PRI_LOW,
+ dpbp_node->token, &num_of_bufs);
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Unable to obtain free buf count (err=%d)",
+ ret);
+ return 0;
+ }
+
+ RTE_LOG(DEBUG, PMD, "Free bufs = %u", num_of_bufs);
+
+ return num_of_bufs;
+}
+
+struct rte_mempool_ops dpaa2_mpool_ops = {
+ .name = "dpaa2",
+ .alloc = rte_hw_mbuf_create_pool,
+ .free = rte_hw_mbuf_free_pool,
+ .enqueue = rte_hw_mbuf_free_bulk,
+ .dequeue = rte_dpaa2_mbuf_alloc_bulk,
+ .get_count = rte_hw_mbuf_get_count,
+};
+
+MEMPOOL_REGISTER_OPS(dpaa2_mpool_ops);
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DPAA2_HW_DPBP_H_
+#define _DPAA2_HW_DPBP_H_
+
+#define DPAA2_MAX_BUF_POOLS 8
+
+struct buf_pool_cfg {
+ void *addr;
+ /**< The address from where DPAA2 will carve out the buffers */
+ phys_addr_t phys_addr;
+ /**< Physical address of the memory provided in addr */
+ uint32_t num;
+ /**< Number of buffers */
+ uint32_t size;
+ /**< Size including headroom for each buffer */
+ uint16_t align;
+ /**< Buffer alignment (in bytes) */
+ uint16_t bpid;
+ /**< Autogenerated buffer pool ID for internal use */
+};
+
+struct buf_pool {
+ uint32_t size; /**< Size of the Pool */
+ uint32_t num_bufs; /**< Number of buffers in Pool */
+ uint16_t bpid; /**< Pool ID, from pool configuration */
+ uint8_t *h_bpool_mem; /**< Internal context data */
+ struct dpaa2_dpbp_dev *dpbp_node; /**< Hardware context */
+};
+
+/*!
+ * Buffer pool list configuration structure. User need to give DPAA2 the
+ * valid number of 'num_buf_pools'.
+ */
+struct dpaa2_bp_list_cfg {
+ struct buf_pool_cfg buf_pool; /* Configuration of each buffer pool*/
+};
+
+struct dpaa2_bp_list {
+ struct dpaa2_bp_list *next;
+ struct rte_mempool *mp; /**< DPDK RTE EAL pool reference */
+ int32_t dpaa2_ops_index; /**< Index into DPDK Mempool ops table */
+ struct buf_pool buf_pool;
+};
+
+struct dpaa2_bp_info {
+ uint32_t meta_data_size;
+ uint32_t bpid;
+ struct dpaa2_bp_list *bp_list;
+};
+
+#define mempool_to_bpinfo(mp) ((struct dpaa2_bp_info *)(mp)->pool_data)
+#define mempool_to_bpid(mp) ((mempool_to_bpinfo(mp))->bpid)
+
+extern struct dpaa2_bp_info rte_dpaa2_bpid_info[MAX_BPID];
+
+int rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
+ void **obj_table, unsigned int count);
+
+#endif /* _DPAA2_HW_DPBP_H_ */
git.droids-corp.org / dpdk.git / commitdiff