``_rte_eth_dev_callback_process``. In 17.02 the function will return an ``int``
instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
-* ethdev: for 17.02 it is planned to deprecate the following five functions
- and move them in ixgbe:
-
- ``rte_eth_dev_set_vf_rxmode``
-
- ``rte_eth_dev_set_vf_rx``
-
- ``rte_eth_dev_set_vf_tx``
-
- ``rte_eth_dev_set_vf_vlan_filter``
-
- ``rte_eth_set_vf_rate_limit``
-
* ABI changes are planned for 17.02 in the ``rte_mbuf`` structure: some fields
may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
``nb_segs`` in one operation, because some platforms have an overhead if the
Also, make sure to start the actual text at the margin.
=========================================================
+* **Moved five APIs for VF management from the ethdev to the ixgbe PMD.**
+
+ The following five APIs for VF management from the PF have been removed from the ethdev,
+ renamed and added to the ixgbe PMD::
+
+ rte_eth_dev_set_vf_rate_limit
+ rte_eth_dev_set_vf_rx
+ rte_eth_dev_set_vf_rxmode
+ rte_eth_dev_set_vf_tx
+ rte_eth_dev_set_vf_vlan_filter
+
+ The API's have been renamed to the following::
+
+ rte_pmd_ixgbe_set_vf_rate_limit
+ rte_pmd_ixgbe_set_vf_rx
+ rte_pmd_ixgbe_set_vf_rxmode
+ rte_pmd_ixgbe_set_vf_tx
+ rte_pmd_ixgbe_set_vf_vlan_filter
+
+ The declarations for the API’s can be found in ``rte_pmd_ixgbe.h``.
ABI Changes
-----------
librte_cryptodev.so.2
librte_distributor.so.1
librte_eal.so.3
- librte_ethdev.so.5
+ + librte_ethdev.so.6
librte_hash.so.2
librte_ip_frag.so.1
librte_jobstats.so.1
# BSD LICENSE
#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
EXPORT_MAP := rte_ether_version.map
-LIBABIVER := 5
+LIBABIVER := 6
SRCS-y += rte_ethdev.c
SRCS-y += rte_flow.c
return 0;
}
-int
-rte_eth_dev_set_vf_rxmode(uint8_t port_id, uint16_t vf,
- uint16_t rx_mode, uint8_t on)
-{
- uint16_t num_vfs;
- struct rte_eth_dev *dev;
- struct rte_eth_dev_info dev_info;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- rte_eth_dev_info_get(port_id, &dev_info);
-
- num_vfs = dev_info.max_vfs;
- if (vf > num_vfs) {
- RTE_PMD_DEBUG_TRACE("set VF RX mode:invalid VF id %d\n", vf);
- return -EINVAL;
- }
-
- if (rx_mode == 0) {
- RTE_PMD_DEBUG_TRACE("set VF RX mode:mode mask ca not be zero\n");
- return -EINVAL;
- }
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx_mode, -ENOTSUP);
- return (*dev->dev_ops->set_vf_rx_mode)(dev, vf, rx_mode, on);
-}
/*
* Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
return (*dev->dev_ops->uc_all_hash_table_set)(dev, on);
}
-int
-rte_eth_dev_set_vf_rx(uint8_t port_id, uint16_t vf, uint8_t on)
-{
- uint16_t num_vfs;
- struct rte_eth_dev *dev;
- struct rte_eth_dev_info dev_info;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- rte_eth_dev_info_get(port_id, &dev_info);
-
- num_vfs = dev_info.max_vfs;
- if (vf > num_vfs) {
- RTE_PMD_DEBUG_TRACE("port %d: invalid vf id\n", port_id);
- return -EINVAL;
- }
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx, -ENOTSUP);
- return (*dev->dev_ops->set_vf_rx)(dev, vf, on);
-}
-
-int
-rte_eth_dev_set_vf_tx(uint8_t port_id, uint16_t vf, uint8_t on)
-{
- uint16_t num_vfs;
- struct rte_eth_dev *dev;
- struct rte_eth_dev_info dev_info;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- rte_eth_dev_info_get(port_id, &dev_info);
-
- num_vfs = dev_info.max_vfs;
- if (vf > num_vfs) {
- RTE_PMD_DEBUG_TRACE("set pool tx:invalid pool id=%d\n", vf);
- return -EINVAL;
- }
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_tx, -ENOTSUP);
- return (*dev->dev_ops->set_vf_tx)(dev, vf, on);
-}
-
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port_id, uint16_t vlan_id,
- uint64_t vf_mask, uint8_t vlan_on)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- if (vlan_id > ETHER_MAX_VLAN_ID) {
- RTE_PMD_DEBUG_TRACE("VF VLAN filter:invalid VLAN id=%d\n",
- vlan_id);
- return -EINVAL;
- }
-
- if (vf_mask == 0) {
- RTE_PMD_DEBUG_TRACE("VF VLAN filter:pool_mask can not be 0\n");
- return -EINVAL;
- }
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_vlan_filter, -ENOTSUP);
- return (*dev->dev_ops->set_vf_vlan_filter)(dev, vlan_id,
- vf_mask, vlan_on);
-}
-
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate)
{
return (*dev->dev_ops->set_queue_rate_limit)(dev, queue_idx, tx_rate);
}
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
- uint64_t q_msk)
-{
- struct rte_eth_dev *dev;
- struct rte_eth_dev_info dev_info;
- struct rte_eth_link link;
-
- if (q_msk == 0)
- return 0;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- rte_eth_dev_info_get(port_id, &dev_info);
- link = dev->data->dev_link;
-
- if (vf > dev_info.max_vfs) {
- RTE_PMD_DEBUG_TRACE("set VF rate limit:port %d: "
- "invalid vf id=%d\n", port_id, vf);
- return -EINVAL;
- }
-
- if (tx_rate > link.link_speed) {
- RTE_PMD_DEBUG_TRACE("set VF rate limit:invalid tx_rate=%d, "
- "bigger than link speed= %d\n",
- tx_rate, link.link_speed);
- return -EINVAL;
- }
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rate_limit, -ENOTSUP);
- return (*dev->dev_ops->set_vf_rate_limit)(dev, vf, tx_rate, q_msk);
-}
-
int
rte_eth_mirror_rule_set(uint8_t port_id,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t on);
/**< @internal Set all Unicast Hash bitmap */
-typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t rx_mode,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint8_t on);
-/**< @internal Enable or disable a VF transmit */
-
-typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
- uint16_t vlan,
- uint64_t vf_mask,
- uint8_t vlan_on);
-/**< @internal Set VF VLAN pool filter */
-
typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
uint16_t queue_idx,
uint16_t tx_rate);
/**< @internal Set queue TX rate */
-typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
- uint16_t vf,
- uint16_t tx_rate,
- uint64_t q_msk);
-/**< @internal Set VF TX rate */
-
typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */
eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */
- eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */
- eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */
- eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */
- eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */
- eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */
-
eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */
eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */
eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
*/
int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
- /**
- * Set RX L2 Filtering mode of a VF of an Ethernet device.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param rx_mode
- * The RX mode mask, which is one or more of accepting Untagged Packets,
- * packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
- * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
- * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
- * in rx_mode.
- * @param on
- * 1 - Enable a VF RX mode.
- * 0 - Disable a VF RX mode.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
- uint8_t on);
-
-/**
-* Enable or disable a VF traffic transmit of the Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic transmit.
-* 0 - Disable a VF traffic transmit.
-* @return
-* - (0) if successful.
-* - (-ENODEV) if *port_id* invalid.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable or disable a VF traffic receive of an Ethernet device.
-*
-* @param port
-* The port identifier of the Ethernet device.
-* @param vf
-* VF id.
-* @param on
-* 1 - Enable a VF traffic receive.
-* 0 - Disable a VF traffic receive.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
-* received VLAN packets tagged with a given VLAN Tag Identifier.
-*
-* @param port id
-* The port identifier of the Ethernet device.
-* @param vlan_id
-* The VLAN Tag Identifier whose filtering must be enabled or disabled.
-* @param vf_mask
-* Bitmap listing which VFs participate in the VLAN filtering.
-* @param vlan_on
-* 1 - Enable VFs VLAN filtering.
-* 0 - Disable VFs VLAN filtering.
-* @return
-* - (0) if successful.
-* - (-ENOTSUP) if hardware doesn't support.
-* - (-ENODEV) if *port_id* invalid.
-* - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
- uint64_t vf_mask,
- uint8_t vlan_on);
-
/**
* Set a traffic mirroring rule on an Ethernet device
*
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
-/**
- * Set the rate limitation for a vf on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param vf
- * VF id.
- * @param tx_rate
- * The tx rate allocated from the total link speed for this VF id.
- * @param q_msk
- * The queue mask which need to set the rate.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support this feature.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
- uint16_t tx_rate, uint64_t q_msk);
-
/**
* Initialize bypass logic. This function needs to be called before
* executing any other bypass API.
rte_eth_dev_set_mtu;
rte_eth_dev_set_rx_queue_stats_mapping;
rte_eth_dev_set_tx_queue_stats_mapping;
- rte_eth_dev_set_vf_rx;
- rte_eth_dev_set_vf_rxmode;
- rte_eth_dev_set_vf_tx;
- rte_eth_dev_set_vf_vlan_filter;
rte_eth_dev_set_vlan_offload;
rte_eth_dev_set_vlan_pvid;
rte_eth_dev_set_vlan_strip_on_queue;
rte_eth_rx_queue_info_get;
rte_eth_rx_queue_setup;
rte_eth_set_queue_rate_limit;
- rte_eth_set_vf_rate_limit;
rte_eth_stats;
rte_eth_stats_get;
rte_eth_stats_reset;
git.droids-corp.org / dpdk.git / commitdiff