net/i40e: support Linux VF to configure IRQ link list

i40e PF host only support to work with DPDK VF driver, Linux
VF driver is not supported. This change will enhance in
configuring IRQ link list.

This Change will identify VF client by number of vector
requested. DPDK VF will ask only single one while Linux VF
will request at least 2. It will have different configuration
for different clients. DPDK VF will be configured to link all
queue together, while Linux VF will be configured per request.

Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>

diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c
index e5760f0..dbea5d0 100644 (file)
--- a/drivers/net/i40e/i40e_pf.c
+++ b/drivers/net/i40e/i40e_pf.c
@@ -581,14 +581,117 @@ send_msg:
        return ret;
 }
 
+static void
+i40e_pf_config_irq_link_list(struct i40e_pf_vf *vf,
+                             struct i40e_virtchnl_vector_map *vvm)
+{
+#define BITS_PER_CHAR 8
+       uint64_t linklistmap = 0, tempmap;
+       struct i40e_hw *hw = I40E_PF_TO_HW(vf->pf);
+       uint16_t qid;
+       bool b_first_q = true;
+       enum i40e_queue_type qtype;
+       uint16_t vector_id;
+       uint32_t reg, reg_idx;
+       uint16_t itr_idx = 0, i;
+
+       vector_id = vvm->vector_id;
+       /* setup the head */
+       if (!vector_id)
+               reg_idx = I40E_VPINT_LNKLST0(vf->vf_idx);
+       else
+               reg_idx = I40E_VPINT_LNKLSTN(
+               ((hw->func_caps.num_msix_vectors_vf - 1) * vf->vf_idx)
+               + (vector_id - 1));
+
+       if (vvm->rxq_map == 0 && vvm->txq_map == 0) {
+               I40E_WRITE_REG(hw, reg_idx,
+                       I40E_VPINT_LNKLST0_FIRSTQ_INDX_MASK);
+               goto cfg_irq_done;
+       }
+
+       /* sort all rx and tx queues */
+       tempmap = vvm->rxq_map;
+       for (i = 0; i < sizeof(vvm->rxq_map) * BITS_PER_CHAR; i++) {
+               if (tempmap & 0x1)
+                       linklistmap |= (1 << (2 * i));
+               tempmap >>= 1;
+       }
+
+       tempmap = vvm->txq_map;
+       for (i = 0; i < sizeof(vvm->txq_map) * BITS_PER_CHAR; i++) {
+               if (tempmap & 0x1)
+                       linklistmap |= (1 << (2 * i + 1));
+               tempmap >>= 1;
+       }
+
+       /* Link all rx and tx queues into a chained list */
+       tempmap = linklistmap;
+       i = 0;
+       b_first_q = true;
+       do {
+               if (tempmap & 0x1) {
+                       qtype = (enum i40e_queue_type)(i % 2);
+                       qid = vf->vsi->base_queue + i / 2;
+                       if (b_first_q) {
+                               /* This is header */
+                               b_first_q = false;
+                               reg = ((qtype <<
+                               I40E_VPINT_LNKLSTN_FIRSTQ_TYPE_SHIFT)
+                               | qid);
+                       } else {
+                               /* element in the link list */
+                               reg = (vector_id) |
+                               (qtype << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT) |
+                               (qid << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT) |
+                               BIT(I40E_QINT_RQCTL_CAUSE_ENA_SHIFT) |
+                               (itr_idx << I40E_QINT_RQCTL_ITR_INDX_SHIFT);
+                       }
+                       I40E_WRITE_REG(hw, reg_idx, reg);
+                       /* find next register to program */
+                       switch (qtype) {
+                       case I40E_QUEUE_TYPE_RX:
+                               reg_idx = I40E_QINT_RQCTL(qid);
+                               itr_idx = vvm->rxitr_idx;
+                               break;
+                       case I40E_QUEUE_TYPE_TX:
+                               reg_idx = I40E_QINT_TQCTL(qid);
+                               itr_idx = vvm->txitr_idx;
+                               break;
+                       default:
+                               break;
+                       }
+               }
+               i++;
+               tempmap >>= 1;
+       } while (tempmap);
+
+       /* Terminate the link list */
+       reg = (vector_id) |
+               (0 << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT) |
+               (0x7FF << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT) |
+               BIT(I40E_QINT_RQCTL_CAUSE_ENA_SHIFT) |
+               (itr_idx << I40E_QINT_RQCTL_ITR_INDX_SHIFT);
+       I40E_WRITE_REG(hw, reg_idx, reg);
+
+cfg_irq_done:
+       I40E_WRITE_FLUSH(hw);
+}
+
 static int
 i40e_pf_host_process_cmd_config_irq_map(struct i40e_pf_vf *vf,
                                        uint8_t *msg, uint16_t msglen,
                                        bool b_op)
 {
        int ret = I40E_SUCCESS;
+       struct i40e_pf *pf = vf->pf;
+       struct i40e_hw *hw = I40E_PF_TO_HW(vf->pf);
        struct i40e_virtchnl_irq_map_info *irqmap =
            (struct i40e_virtchnl_irq_map_info *)msg;
+       struct i40e_virtchnl_vector_map *map;
+       int i;
+       uint16_t vector_id;
+       unsigned long qbit_max;
 
        if (!b_op) {
                i40e_pf_host_send_msg_to_vf(
@@ -604,23 +707,46 @@ i40e_pf_host_process_cmd_config_irq_map(struct i40e_pf_vf *vf,
                goto send_msg;
        }
 
-       /* Assume VF only have 1 vector to bind all queues */
-       if (irqmap->num_vectors != 1) {
-               PMD_DRV_LOG(ERR, "DKDK host only support 1 vector");
-               ret = I40E_ERR_PARAM;
+       /* PF host will support both DPDK VF or Linux VF driver, identify by
+        * number of vectors requested.
+        */
+
+       /* DPDK VF only requires single vector */
+       if (irqmap->num_vectors == 1) {
+               /* This MSIX intr store the intr in VF range */
+               vf->vsi->msix_intr = irqmap->vecmap[0].vector_id;
+               vf->vsi->nb_msix = irqmap->num_vectors;
+               vf->vsi->nb_used_qps = vf->vsi->nb_qps;
+
+               /* Don't care how the TX/RX queue mapping with this vector.
+                * Link all VF RX queues together. Only did mapping work.
+                * VF can disable/enable the intr by itself.
+                */
+               i40e_vsi_queues_bind_intr(vf->vsi);
                goto send_msg;
        }
 
-       /* This MSIX intr store the intr in VF range */
-       vf->vsi->msix_intr = irqmap->vecmap[0].vector_id;
-       vf->vsi->nb_msix = irqmap->num_vectors;
-       vf->vsi->nb_used_qps = vf->vsi->nb_qps;
+       /* Then, it's Linux VF driver */
+       qbit_max = 1 << pf->vf_nb_qp_max;
+       for (i = 0; i < irqmap->num_vectors; i++) {
+               map = &irqmap->vecmap[i];
+
+               vector_id = map->vector_id;
+               /* validate msg params */
+               if (vector_id >= hw->func_caps.num_msix_vectors_vf) {
+                       ret = I40E_ERR_PARAM;
+                       goto send_msg;
+               }
+
+               if ((map->rxq_map < qbit_max) && (map->txq_map < qbit_max)) {
+                       i40e_pf_config_irq_link_list(vf, map);
+               } else {
+                       /* configured queue size excceed limit */
+                       ret = I40E_ERR_PARAM;
+                       goto send_msg;
+               }
+       }
 
-       /* Don't care how the TX/RX queue mapping with this vector.
-        * Link all VF RX queues together. Only did mapping work.
-        * VF can disable/enable the intr by itself.
-        */
-       i40e_vsi_queues_bind_intr(vf->vsi);
 send_msg:
        i40e_pf_host_send_msg_to_vf(vf, I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP,
                                                        ret, NULL, 0);