#include "base/i40e_prototype.h"
#include "i40e_ethdev.h"
#include "i40e_pf.h"
+#include "i40e_rxtx.h"
#include "rte_pmd_i40e.h"
/* The max bandwidth of i40e is 40Gbps. */
return status;
}
+
+static int check_invalid_pkt_type(uint32_t pkt_type)
+{
+ uint32_t l2, l3, l4, tnl, il2, il3, il4;
+
+ l2 = pkt_type & RTE_PTYPE_L2_MASK;
+ l3 = pkt_type & RTE_PTYPE_L3_MASK;
+ l4 = pkt_type & RTE_PTYPE_L4_MASK;
+ tnl = pkt_type & RTE_PTYPE_TUNNEL_MASK;
+ il2 = pkt_type & RTE_PTYPE_INNER_L2_MASK;
+ il3 = pkt_type & RTE_PTYPE_INNER_L3_MASK;
+ il4 = pkt_type & RTE_PTYPE_INNER_L4_MASK;
+
+ if (l2 &&
+ l2 != RTE_PTYPE_L2_ETHER &&
+ l2 != RTE_PTYPE_L2_ETHER_TIMESYNC &&
+ l2 != RTE_PTYPE_L2_ETHER_ARP &&
+ l2 != RTE_PTYPE_L2_ETHER_LLDP &&
+ l2 != RTE_PTYPE_L2_ETHER_NSH &&
+ l2 != RTE_PTYPE_L2_ETHER_VLAN &&
+ l2 != RTE_PTYPE_L2_ETHER_QINQ)
+ return -1;
+
+ if (l3 &&
+ l3 != RTE_PTYPE_L3_IPV4 &&
+ l3 != RTE_PTYPE_L3_IPV4_EXT &&
+ l3 != RTE_PTYPE_L3_IPV6 &&
+ l3 != RTE_PTYPE_L3_IPV4_EXT_UNKNOWN &&
+ l3 != RTE_PTYPE_L3_IPV6_EXT &&
+ l3 != RTE_PTYPE_L3_IPV6_EXT_UNKNOWN)
+ return -1;
+
+ if (l4 &&
+ l4 != RTE_PTYPE_L4_TCP &&
+ l4 != RTE_PTYPE_L4_UDP &&
+ l4 != RTE_PTYPE_L4_FRAG &&
+ l4 != RTE_PTYPE_L4_SCTP &&
+ l4 != RTE_PTYPE_L4_ICMP &&
+ l4 != RTE_PTYPE_L4_NONFRAG)
+ return -1;
+
+ if (tnl &&
+ tnl != RTE_PTYPE_TUNNEL_IP &&
+ tnl != RTE_PTYPE_TUNNEL_GRENAT &&
+ tnl != RTE_PTYPE_TUNNEL_VXLAN &&
+ tnl != RTE_PTYPE_TUNNEL_NVGRE &&
+ tnl != RTE_PTYPE_TUNNEL_GENEVE &&
+ tnl != RTE_PTYPE_TUNNEL_GRENAT)
+ return -1;
+
+ if (il2 &&
+ il2 != RTE_PTYPE_INNER_L2_ETHER &&
+ il2 != RTE_PTYPE_INNER_L2_ETHER_VLAN &&
+ il2 != RTE_PTYPE_INNER_L2_ETHER_QINQ)
+ return -1;
+
+ if (il3 &&
+ il3 != RTE_PTYPE_INNER_L3_IPV4 &&
+ il3 != RTE_PTYPE_INNER_L3_IPV4_EXT &&
+ il3 != RTE_PTYPE_INNER_L3_IPV6 &&
+ il3 != RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN &&
+ il3 != RTE_PTYPE_INNER_L3_IPV6_EXT &&
+ il3 != RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN)
+ return -1;
+
+ if (il4 &&
+ il4 != RTE_PTYPE_INNER_L4_TCP &&
+ il4 != RTE_PTYPE_INNER_L4_UDP &&
+ il4 != RTE_PTYPE_INNER_L4_FRAG &&
+ il4 != RTE_PTYPE_INNER_L4_SCTP &&
+ il4 != RTE_PTYPE_INNER_L4_ICMP &&
+ il4 != RTE_PTYPE_INNER_L4_NONFRAG)
+ return -1;
+
+ return 0;
+}
+
+static int check_invalid_ptype_mapping(
+ struct rte_pmd_i40e_ptype_mapping *mapping_table,
+ uint16_t count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ uint16_t ptype = mapping_table[i].hw_ptype;
+ uint32_t pkt_type = mapping_table[i].sw_ptype;
+
+ if (ptype >= I40E_MAX_PKT_TYPE)
+ return -1;
+
+ if (pkt_type == RTE_PTYPE_UNKNOWN)
+ continue;
+
+ if (pkt_type & RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK)
+ continue;
+
+ if (check_invalid_pkt_type(pkt_type))
+ return -1;
+ }
+
+ return 0;
+}
+
+int
+rte_pmd_i40e_ptype_mapping_update(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t count,
+ uint8_t exclusive)
+{
+ struct rte_eth_dev *dev;
+ struct i40e_adapter *ad;
+ int i;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (!is_i40e_supported(dev))
+ return -ENOTSUP;
+
+ if (count > I40E_MAX_PKT_TYPE)
+ return -EINVAL;
+
+ if (check_invalid_ptype_mapping(mapping_items, count))
+ return -EINVAL;
+
+ ad = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+
+ if (exclusive) {
+ for (i = 0; i < I40E_MAX_PKT_TYPE; i++)
+ ad->ptype_tbl[i] = RTE_PTYPE_UNKNOWN;
+ }
+
+ for (i = 0; i < count; i++)
+ ad->ptype_tbl[mapping_items[i].hw_ptype]
+ = mapping_items[i].sw_ptype;
+
+ return 0;
+}
+
+int rte_pmd_i40e_ptype_mapping_reset(uint8_t port)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (!is_i40e_supported(dev))
+ return -ENOTSUP;
+
+ i40e_set_default_ptype_table(dev);
+
+ return 0;
+}
+
+int rte_pmd_i40e_ptype_mapping_get(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t size,
+ uint16_t *count,
+ uint8_t valid_only)
+{
+ struct rte_eth_dev *dev;
+ struct i40e_adapter *ad;
+ int n = 0;
+ uint16_t i;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (!is_i40e_supported(dev))
+ return -ENOTSUP;
+
+ ad = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+
+ for (i = 0; i < I40E_MAX_PKT_TYPE; i++) {
+ if (n >= size)
+ break;
+ if (valid_only && ad->ptype_tbl[i] == RTE_PTYPE_UNKNOWN)
+ continue;
+ mapping_items[n].hw_ptype = i;
+ mapping_items[n].sw_ptype = ad->ptype_tbl[i];
+ n++;
+ }
+
+ *count = n;
+ return 0;
+}
+
+int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
+ uint32_t target,
+ uint8_t mask,
+ uint32_t pkt_type)
+{
+ struct rte_eth_dev *dev;
+ struct i40e_adapter *ad;
+ uint16_t i;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (!is_i40e_supported(dev))
+ return -ENOTSUP;
+
+ if (!mask && check_invalid_pkt_type(target))
+ return -EINVAL;
+
+ if (check_invalid_pkt_type(pkt_type))
+ return -EINVAL;
+
+ ad = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+
+ for (i = 0; i < I40E_MAX_PKT_TYPE; i++) {
+ if (mask) {
+ if ((target | ad->ptype_tbl[i]) == target &&
+ (target & ad->ptype_tbl[i]))
+ ad->ptype_tbl[i] = pkt_type;
+ } else {
+ if (ad->ptype_tbl[i] == target)
+ ad->ptype_tbl[i] = pkt_type;
+ }
+ }
+
+ return 0;
+}
struct rte_pmd_i40e_profile_info p_info[1];
};
+/**
+ * ptype mapping table only accept RTE_PTYPE_XXX or "user defined" ptype.
+ * A ptype with MSB set will be regarded as a user defined ptype.
+ * Below macro help to create a user defined ptype.
+ */
+#define RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK 0x80000000
+
+struct rte_pmd_i40e_ptype_mapping {
+ uint16_t hw_ptype; /**< hardware defined packet type*/
+ uint32_t sw_ptype; /**< software defined packet type */
+};
+
/**
* Notify VF when PF link status changes.
*
*/
int rte_pmd_i40e_get_ddp_list(uint8_t port, uint8_t *buff, uint32_t size);
+/**
+ * Update hardware defined ptype to software defined packet type
+ * mapping table.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the mapping items array.
+ * @param count
+ * number of mapping items.
+ * @param exclusive
+ * the flag indicate different ptype mapping update method.
+ * -(0) only overwrite referred PTYPE mapping,
+ * keep other PTYPEs mapping unchanged.
+ * -(!0) overwrite referred PTYPE mapping,
+ * set other PTYPEs maps to PTYPE_UNKNOWN.
+ */
+int rte_pmd_i40e_ptype_mapping_update(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t count,
+ uint8_t exclusive);
+
+/**
+ * Reset hardware defined ptype to software defined ptype
+ * mapping table to default.
+ *
+ * @param port
+ * pointer to port identifier of the device
+ */
+int rte_pmd_i40e_ptype_mapping_reset(uint8_t port);
+
+/**
+ * Get hardware defined ptype to software defined ptype
+ * mapping items.
+ *
+ * @param port
+ * pointer to port identifier of the device.
+ * @param mapping_items
+ * the base address of the array to store returned items.
+ * @param size
+ * the size of the input array.
+ * @param count
+ * the place to store the number of returned items.
+ * @param valid_only
+ * -(0) return full mapping table.
+ * -(!0) only return mapping items which packet_type != RTE_PTYPE_UNKNOWN.
+ */
+int rte_pmd_i40e_ptype_mapping_get(
+ uint8_t port,
+ struct rte_pmd_i40e_ptype_mapping *mapping_items,
+ uint16_t size,
+ uint16_t *count,
+ uint8_t valid_only);
+
+/**
+ * Replace a specific or a group of software defined ptypes
+ * with a new one
+ *
+ * @param port
+ * pointer to port identifier of the device
+ * @param target
+ * the packet type to be replaced
+ * @param mask
+ * -(0) target represent a specific software defined ptype.
+ * -(!0) target is a mask to represent a group of software defined ptypes.
+ * @param pkt_type
+ * the new packet type to overwrite
+ */
+int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
+ uint32_t target,
+ uint8_t mask,
+ uint32_t pkt_type);
+
#endif /* _PMD_I40E_H_ */
git.droids-corp.org / dpdk.git / commitdiff