fm10k: fix VLAN in Rx mbuf

vlan_tci should be copied from RX descriptor to mbuf,
and flag PKT_RX_VLAN_PKT should be set for every RX packet,
this patch fixes this issue.
Packets in fm10k device always carry at least one VLAN tag.
For those packets coming in without VLAN tag,
the port default VLAN tag will be used.
So in fm10k, always PKT_RX_VLAN_PKT flag is set and vlan_tci
is valid for each RX packet's mbuf.

Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

diff --git a/drivers/net/fm10k/fm10k_rxtx.c b/drivers/net/fm10k/fm10k_rxtx.c
index 1bac28d..e958865 100644 (file)
--- a/drivers/net/fm10k/fm10k_rxtx.c
+++ b/drivers/net/fm10k/fm10k_rxtx.c
@@ -104,9 +104,6 @@ rx_desc_to_ol_flags(struct rte_mbuf *m, const union fm10k_rx_desc *d)
                (FM10K_RXD_STATUS_L4CS | FM10K_RXD_STATUS_L4E)))
                m->ol_flags |= PKT_RX_L4_CKSUM_BAD;
 
-       if (d->d.staterr & FM10K_RXD_STATUS_VEXT)
-               m->ol_flags |= PKT_RX_VLAN_PKT;
-
        if (unlikely(d->d.staterr & FM10K_RXD_STATUS_HBO))
                m->ol_flags |= PKT_RX_HBUF_OVERFLOW;
 
@@ -146,6 +143,15 @@ fm10k_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 #endif
 
                mbuf->hash.rss = desc.d.rss;
+               /**
+                * Packets in fm10k device always carry at least one VLAN tag.
+                * For those packets coming in without VLAN tag,
+                * the port default VLAN tag will be used.
+                * So, always PKT_RX_VLAN_PKT flag is set and vlan_tci
+                * is valid for each RX packet's mbuf.
+                */
+               mbuf->ol_flags |= PKT_RX_VLAN_PKT;
+               mbuf->vlan_tci = desc.w.vlan;
 
                rx_pkts[count] = mbuf;
                if (++next_dd == q->nb_desc) {
@@ -292,6 +298,15 @@ fm10k_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
                rx_desc_to_ol_flags(first_seg, &desc);
 #endif
                first_seg->hash.rss = desc.d.rss;
+               /**
+                * Packets in fm10k device always carry at least one VLAN tag.
+                * For those packets coming in without VLAN tag,
+                * the port default VLAN tag will be used.
+                * So, always PKT_RX_VLAN_PKT flag is set and vlan_tci
+                * is valid for each RX packet's mbuf.
+                */
+               mbuf->ol_flags |= PKT_RX_VLAN_PKT;
+               first_seg->vlan_tci = desc.w.vlan;
 
                /* Prefetch data of first segment, if configured to do so. */
                rte_packet_prefetch((char *)first_seg->buf_addr +