--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright 2016 Cavium.
+ * Copyright 2016 Intel Corporation.
+ * Copyright 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_EVENTDEV_H_
+#define _RTE_EVENTDEV_H_
+
+/**
+ * @file
+ *
+ * RTE Event Device API
+ *
+ * In a polling model, lcores poll ethdev ports and associated rx queues
+ * directly to look for packet. In an event driven model, by contrast, lcores
+ * call the scheduler that selects packets for them based on programmer
+ * specified criteria. Eventdev library adds support for event driven
+ * programming model, which offer applications automatic multicore scaling,
+ * dynamic load balancing, pipelining, packet ingress order maintenance and
+ * synchronization services to simplify application packet processing.
+ *
+ * The Event Device API is composed of two parts:
+ *
+ * - The application-oriented Event API that includes functions to setup
+ * an event device (configure it, setup its queues, ports and start it), to
+ * establish the link between queues to port and to receive events, and so on.
+ *
+ * - The driver-oriented Event API that exports a function allowing
+ * an event poll Mode Driver (PMD) to simultaneously register itself as
+ * an event device driver.
+ *
+ * Event device components:
+ *
+ * +-----------------+
+ * | +-------------+ |
+ * +-------+ | | flow 0 | |
+ * |Packet | | +-------------+ |
+ * |event | | +-------------+ |
+ * | | | | flow 1 | |port_link(port0, queue0)
+ * +-------+ | +-------------+ | | +--------+
+ * +-------+ | +-------------+ o-----v-----o |dequeue +------+
+ * |Crypto | | | flow n | | | event +------->|Core 0|
+ * |work | | +-------------+ o----+ | port 0 | | |
+ * |done ev| | event queue 0 | | +--------+ +------+
+ * +-------+ +-----------------+ |
+ * +-------+ |
+ * |Timer | +-----------------+ | +--------+
+ * |expiry | | +-------------+ | +------o |dequeue +------+
+ * |event | | | flow 0 | o-----------o event +------->|Core 1|
+ * +-------+ | +-------------+ | +----o port 1 | | |
+ * Event enqueue | +-------------+ | | +--------+ +------+
+ * o-------------> | | flow 1 | | |
+ * enqueue( | +-------------+ | |
+ * queue_id, | | | +--------+ +------+
+ * flow_id, | +-------------+ | | | |dequeue |Core 2|
+ * sched_type, | | flow n | o-----------o event +------->| |
+ * event_type, | +-------------+ | | | port 2 | +------+
+ * subev_type, | event queue 1 | | +--------+
+ * event) +-----------------+ | +--------+
+ * | | |dequeue +------+
+ * +-------+ +-----------------+ | | event +------->|Core n|
+ * |Core | | +-------------+ o-----------o port n | | |
+ * |(SW) | | | flow 0 | | | +--------+ +--+---+
+ * |event | | +-------------+ | | |
+ * +-------+ | +-------------+ | | |
+ * ^ | | flow 1 | | | |
+ * | | +-------------+ o------+ |
+ * | | +-------------+ | |
+ * | | | flow n | | |
+ * | | +-------------+ | |
+ * | | event queue n | |
+ * | +-----------------+ |
+ * | |
+ * +-----------------------------------------------------------+
+ *
+ * Event device: A hardware or software-based event scheduler.
+ *
+ * Event: A unit of scheduling that encapsulates a packet or other datatype
+ * like SW generated event from the CPU, Crypto work completion notification,
+ * Timer expiry event notification etc as well as metadata.
+ * The metadata includes flow ID, scheduling type, event priority, event_type,
+ * sub_event_type etc.
+ *
+ * Event queue: A queue containing events that are scheduled by the event dev.
+ * An event queue contains events of different flows associated with scheduling
+ * types, such as atomic, ordered, or parallel.
+ *
+ * Event port: An application's interface into the event dev for enqueue and
+ * dequeue operations. Each event port can be linked with one or more
+ * event queues for dequeue operations.
+ *
+ * By default, all the functions of the Event Device API exported by a PMD
+ * are lock-free functions which assume to not be invoked in parallel on
+ * different logical cores to work on the same target object. For instance,
+ * the dequeue function of a PMD cannot be invoked in parallel on two logical
+ * cores to operates on same event port. Of course, this function
+ * can be invoked in parallel by different logical cores on different ports.
+ * It is the responsibility of the upper level application to enforce this rule.
+ *
+ * In all functions of the Event API, the Event device is
+ * designated by an integer >= 0 named the device identifier *dev_id*
+ *
+ * At the Event driver level, Event devices are represented by a generic
+ * data structure of type *rte_event_dev*.
+ *
+ * Event devices are dynamically registered during the PCI/SoC device probing
+ * phase performed at EAL initialization time.
+ * When an Event device is being probed, a *rte_event_dev* structure and
+ * a new device identifier are allocated for that device. Then, the
+ * event_dev_init() function supplied by the Event driver matching the probed
+ * device is invoked to properly initialize the device.
+ *
+ * The role of the device init function consists of resetting the hardware or
+ * software event driver implementations.
+ *
+ * If the device init operation is successful, the correspondence between
+ * the device identifier assigned to the new device and its associated
+ * *rte_event_dev* structure is effectively registered.
+ * Otherwise, both the *rte_event_dev* structure and the device identifier are
+ * freed.
+ *
+ * The functions exported by the application Event API to setup a device
+ * designated by its device identifier must be invoked in the following order:
+ * - rte_event_dev_configure()
+ * - rte_event_queue_setup()
+ * - rte_event_port_setup()
+ * - rte_event_port_link()
+ * - rte_event_dev_start()
+ *
+ * Then, the application can invoke, in any order, the functions
+ * exported by the Event API to schedule events, dequeue events, enqueue events,
+ * change event queue(s) to event port [un]link establishment and so on.
+ *
+ * Application may use rte_event_[queue/port]_default_conf_get() to get the
+ * default configuration to set up an event queue or event port by
+ * overriding few default values.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_event_dev_configure(), rte_event_queue_setup(), or
+ * rte_event_port_setup()), it must call rte_event_dev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_event_dev_start()
+ * again. The schedule, enqueue and dequeue functions should not be invoked
+ * when the device is stopped.
+ *
+ * Finally, an application can close an Event device by invoking the
+ * rte_event_dev_close() function.
+ *
+ * Each function of the application Event API invokes a specific function
+ * of the PMD that controls the target device designated by its device
+ * identifier.
+ *
+ * For this purpose, all device-specific functions of an Event driver are
+ * supplied through a set of pointers contained in a generic structure of type
+ * *event_dev_ops*.
+ * The address of the *event_dev_ops* structure is stored in the *rte_event_dev*
+ * structure by the device init function of the Event driver, which is
+ * invoked during the PCI/SoC device probing phase, as explained earlier.
+ *
+ * In other words, each function of the Event API simply retrieves the
+ * *rte_event_dev* structure associated with the device identifier and
+ * performs an indirect invocation of the corresponding driver function
+ * supplied in the *event_dev_ops* structure of the *rte_event_dev* structure.
+ *
+ * For performance reasons, the address of the fast-path functions of the
+ * Event driver is not contained in the *event_dev_ops* structure.
+ * Instead, they are directly stored at the beginning of the *rte_event_dev*
+ * structure to avoid an extra indirect memory access during their invocation.
+ *
+ * RTE event device drivers do not use interrupts for enqueue or dequeue
+ * operation. Instead, Event drivers export Poll-Mode enqueue and dequeue
+ * functions to applications.
+ *
+ * An event driven based application has following typical workflow on fastpath:
+ * \code{.c}
+ * while (1) {
+ *
+ * rte_event_schedule(dev_id);
+ *
+ * rte_event_dequeue(...);
+ *
+ * (event processing)
+ *
+ * rte_event_enqueue(...);
+ * }
+ * \endcode
+ *
+ * The events are injected to event device through *enqueue* operation by
+ * event producers in the system. The typical event producers are ethdev
+ * subsystem for generating packet events, CPU(SW) for generating events based
+ * on different stages of application processing, cryptodev for generating
+ * crypto work completion notification etc
+ *
+ * The *dequeue* operation gets one or more events from the event ports.
+ * The application process the events and send to downstream event queue through
+ * rte_event_enqueue_burst() if it is an intermediate stage of event processing,
+ * on the final stage, the application may send to different subsystem like
+ * ethdev to send the packet/event on the wire using ethdev
+ * rte_eth_tx_burst() API.
+ *
+ * The point at which events are scheduled to ports depends on the device.
+ * For hardware devices, scheduling occurs asynchronously without any software
+ * intervention. Software schedulers can either be distributed
+ * (each worker thread schedules events to its own port) or centralized
+ * (a dedicated thread schedules to all ports). Distributed software schedulers
+ * perform the scheduling in rte_event_dequeue_burst(), whereas centralized
+ * scheduler logic is located in rte_event_schedule().
+ * The RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capability flag is not set
+ * indicates the device is centralized and thus needs a dedicated scheduling
+ * thread that repeatedly calls rte_event_schedule().
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include <rte_pci.h>
+#include <rte_mbuf.h>
+
+/* Event device capability bitmap flags */
+#define RTE_EVENT_DEV_CAP_QUEUE_QOS (1ULL << 0)
+/**< Event scheduling prioritization is based on the priority associated with
+ * each event queue.
+ *
+ * @see rte_event_queue_setup()
+ */
+#define RTE_EVENT_DEV_CAP_EVENT_QOS (1ULL << 1)
+/**< Event scheduling prioritization is based on the priority associated with
+ * each event. Priority of each event is supplied in *rte_event* structure
+ * on each enqueue operation.
+ *
+ * @see rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED (1ULL << 2)
+/**< Event device operates in distributed scheduling mode.
+ * In distributed scheduling mode, event scheduling happens in HW or
+ * rte_event_dequeue_burst() or the combination of these two.
+ * If the flag is not set then eventdev is centralized and thus needs a
+ * dedicated scheduling thread that repeatedly calls rte_event_schedule().
+ *
+ * @see rte_event_schedule(), rte_event_dequeue_burst()
+ */
+
+/* Event device priority levels */
+#define RTE_EVENT_DEV_PRIORITY_HIGHEST 0
+/**< Highest priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+#define RTE_EVENT_DEV_PRIORITY_NORMAL 128
+/**< Normal priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+#define RTE_EVENT_DEV_PRIORITY_LOWEST 255
+/**< Lowest priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+
+/**
+ * Get the total number of event devices that have been successfully
+ * initialised.
+ *
+ * @return
+ * The total number of usable event devices.
+ */
+uint8_t
+rte_event_dev_count(void);
+
+/**
+ * Get the device identifier for the named event device.
+ *
+ * @param name
+ * Event device name to select the event device identifier.
+ *
+ * @return
+ * Returns event device identifier on success.
+ * - <0: Failure to find named event device.
+ */
+int
+rte_event_dev_get_dev_id(const char *name);
+
+/**
+ * Return the NUMA socket to which a device is connected.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @return
+ * The NUMA socket id to which the device is connected or
+ * a default of zero if the socket could not be determined.
+ * -(-EINVAL) dev_id value is out of range.
+ */
+int
+rte_event_dev_socket_id(uint8_t dev_id);
+
+/**
+ * Event device information
+ */
+struct rte_event_dev_info {
+ const char *driver_name; /**< Event driver name */
+ struct rte_pci_device *pci_dev; /**< PCI information */
+ uint32_t min_dequeue_timeout_ns;
+ /**< Minimum supported global dequeue timeout(ns) by this device */
+ uint32_t max_dequeue_timeout_ns;
+ /**< Maximum supported global dequeue timeout(ns) by this device */
+ uint32_t dequeue_timeout_ns;
+ /**< Configured global dequeue timeout(ns) for this device */
+ uint8_t max_event_queues;
+ /**< Maximum event_queues supported by this device */
+ uint32_t max_event_queue_flows;
+ /**< Maximum supported flows in an event queue by this device*/
+ uint8_t max_event_queue_priority_levels;
+ /**< Maximum number of event queue priority levels by this device.
+ * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
+ */
+ uint8_t max_event_priority_levels;
+ /**< Maximum number of event priority levels by this device.
+ * Valid when the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability
+ */
+ uint8_t max_event_ports;
+ /**< Maximum number of event ports supported by this device */
+ uint8_t max_event_port_dequeue_depth;
+ /**< Maximum number of events can be dequeued at a time from an
+ * event port by this device.
+ * A device that does not support bulk dequeue will set this as 1.
+ */
+ uint32_t max_event_port_enqueue_depth;
+ /**< Maximum number of events can be enqueued at a time from an
+ * event port by this device.
+ * A device that does not support bulk enqueue will set this as 1.
+ */
+ int32_t max_num_events;
+ /**< A *closed system* event dev has a limit on the number of events it
+ * can manage at a time. An *open system* event dev does not have a
+ * limit and will specify this as -1.
+ */
+ uint32_t event_dev_cap;
+ /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
+};
+
+/**
+ * Retrieve the contextual information of an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param[out] dev_info
+ * A pointer to a structure of type *rte_event_dev_info* to be filled with the
+ * contextual information of the device.
+ *
+ * @return
+ * - 0: Success, driver updates the contextual information of the event device
+ * - <0: Error code returned by the driver info get function.
+ *
+ */
+int
+rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info);
+
+/* Event device configuration bitmap flags */
+#define RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)
+/**< Override the global *dequeue_timeout_ns* and use per dequeue timeout in ns.
+ * @see rte_event_dequeue_timeout_ticks(), rte_event_dequeue_burst()
+ */
+
+/** Event device configuration structure */
+struct rte_event_dev_config {
+ uint32_t dequeue_timeout_ns;
+ /**< rte_event_dequeue_burst() timeout on this device.
+ * This value should be in the range of *min_dequeue_timeout_ns* and
+ * *max_dequeue_timeout_ns* which previously provided in
+ * rte_event_dev_info_get()
+ * @see RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ */
+ int32_t nb_events_limit;
+ /**< Applies to *closed system* event dev only. This field indicates a
+ * limit to ethdev-like devices to limit the number of events injected
+ * into the system to not overwhelm core-to-core events.
+ * This value cannot exceed the *max_num_events* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_queues;
+ /**< Number of event queues to configure on this device.
+ * This value cannot exceed the *max_event_queues* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_ports;
+ /**< Number of event ports to configure on this device.
+ * This value cannot exceed the *max_event_ports* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint32_t nb_event_queue_flows;
+ /**< Number of flows for any event queue on this device.
+ * This value cannot exceed the *max_event_queue_flows* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_port_dequeue_depth;
+ /**< Maximum number of events can be dequeued at a time from an
+ * event port by this device.
+ * This value cannot exceed the *max_event_port_dequeue_depth*
+ * which previously provided in rte_event_dev_info_get()
+ * @see rte_event_port_setup()
+ */
+ uint32_t nb_event_port_enqueue_depth;
+ /**< Maximum number of events can be enqueued at a time from an
+ * event port by this device.
+ * This value cannot exceed the *max_event_port_enqueue_depth*
+ * which previously provided in rte_event_dev_info_get()
+ * @see rte_event_port_setup()
+ */
+ uint32_t event_dev_cfg;
+ /**< Event device config flags(RTE_EVENT_DEV_CFG_)*/
+};
+
+/**
+ * Configure an event device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * The caller may use rte_event_dev_info_get() to get the capability of each
+ * resources available for this event device.
+ *
+ * @param dev_id
+ * The identifier of the device to configure.
+ * @param dev_conf
+ * The event device configuration structure.
+ *
+ * @return
+ * - 0: Success, device configured.
+ * - <0: Error code returned by the driver configuration function.
+ */
+int
+rte_event_dev_configure(uint8_t dev_id,
+ const struct rte_event_dev_config *dev_conf);
+
+
+/* Event queue specific APIs */
+
+/* Event queue configuration bitmap flags */
+#define RTE_EVENT_QUEUE_CFG_DEFAULT (0)
+/**< Default value of *event_queue_cfg* when rte_event_queue_setup() invoked
+ * with queue_conf == NULL
+ *
+ * @see rte_event_queue_setup()
+ */
+#define RTE_EVENT_QUEUE_CFG_TYPE_MASK (3ULL << 0)
+/**< Mask for event queue schedule type configuration request */
+#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (0ULL << 0)
+/**< Allow ATOMIC,ORDERED,PARALLEL schedule type enqueue
+ *
+ * @see RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC, RTE_SCHED_TYPE_PARALLEL
+ * @see rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY (1ULL << 0)
+/**< Allow only ATOMIC schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with ATOMIC only and sched_type != RTE_SCHED_TYPE_ATOMIC
+ *
+ * @see RTE_SCHED_TYPE_ATOMIC, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_ORDERED_ONLY (2ULL << 0)
+/**< Allow only ORDERED schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with ORDERED only and sched_type != RTE_SCHED_TYPE_ORDERED
+ *
+ * @see RTE_SCHED_TYPE_ORDERED, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY (3ULL << 0)
+/**< Allow only PARALLEL schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with PARALLEL only and sched_type != RTE_SCHED_TYPE_PARALLEL
+ *
+ * @see RTE_SCHED_TYPE_PARALLEL, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 2)
+/**< This event queue links only to a single event port.
+ *
+ * @see rte_event_port_setup(), rte_event_port_link()
+ */
+
+/** Event queue configuration structure */
+struct rte_event_queue_conf {
+ uint32_t nb_atomic_flows;
+ /**< The maximum number of active flows this queue can track at any
+ * given time. The value must be in the range of
+ * [1 - nb_event_queue_flows)] which previously provided in
+ * rte_event_dev_info_get().
+ */
+ uint32_t nb_atomic_order_sequences;
+ /**< The maximum number of outstanding events waiting to be
+ * reordered by this queue. In other words, the number of entries in
+ * this queue’s reorder buffer.When the number of events in the
+ * reorder buffer reaches to *nb_atomic_order_sequences* then the
+ * scheduler cannot schedule the events from this queue and invalid
+ * event will be returned from dequeue until one or more entries are
+ * freed up/released.
+ * The value must be in the range of [1 - nb_event_queue_flows)]
+ * which previously supplied to rte_event_dev_configure().
+ */
+ uint32_t event_queue_cfg; /**< Queue cfg flags(EVENT_QUEUE_CFG_) */
+ uint8_t priority;
+ /**< Priority for this event queue relative to other event queues.
+ * The requested priority should in the range of
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested priority to
+ * event device supported priority value.
+ * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
+ */
+};
+
+/**
+ * Retrieve the default configuration information of an event queue designated
+ * by its *queue_id* from the event driver for an event device.
+ *
+ * This function intended to be used in conjunction with rte_event_queue_setup()
+ * where caller needs to set up the queue by overriding few default values.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the event queue to get the configuration information.
+ * The value must be in the range [0, nb_event_queues - 1]
+ * previously supplied to rte_event_dev_configure().
+ * @param[out] queue_conf
+ * The pointer to the default event queue configuration data.
+ * @return
+ * - 0: Success, driver updates the default event queue configuration data.
+ * - <0: Error code returned by the driver info get function.
+ *
+ * @see rte_event_queue_setup()
+ *
+ */
+int
+rte_event_queue_default_conf_get(uint8_t dev_id, uint8_t queue_id,
+ struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Allocate and set up an event queue for an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the event queue to setup. The value must be in the range
+ * [0, nb_event_queues - 1] previously supplied to rte_event_dev_configure().
+ * @param queue_conf
+ * The pointer to the configuration data to be used for the event queue.
+ * NULL value is allowed, in which case default configuration used.
+ *
+ * @see rte_event_queue_default_conf_get()
+ *
+ * @return
+ * - 0: Success, event queue correctly set up.
+ * - <0: event queue configuration failed
+ */
+int
+rte_event_queue_setup(uint8_t dev_id, uint8_t queue_id,
+ const struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Get the number of event queues on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @return
+ * - The number of configured event queues
+ */
+uint8_t
+rte_event_queue_count(uint8_t dev_id);
+
+/**
+ * Get the priority of the event queue on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param queue_id
+ * Event queue identifier.
+ * @return
+ * - If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then the
+ * configured priority of the event queue in
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST] range
+ * else the value RTE_EVENT_DEV_PRIORITY_NORMAL
+ */
+uint8_t
+rte_event_queue_priority(uint8_t dev_id, uint8_t queue_id);
+
+/* Event port specific APIs */
+
+/** Event port configuration structure */
+struct rte_event_port_conf {
+ int32_t new_event_threshold;
+ /**< A backpressure threshold for new event enqueues on this port.
+ * Use for *closed system* event dev where event capacity is limited,
+ * and cannot exceed the capacity of the event dev.
+ * Configuring ports with different thresholds can make higher priority
+ * traffic less likely to be backpressured.
+ * For example, a port used to inject NIC Rx packets into the event dev
+ * can have a lower threshold so as not to overwhelm the device,
+ * while ports used for worker pools can have a higher threshold.
+ * This value cannot exceed the *nb_events_limit*
+ * which previously supplied to rte_event_dev_configure()
+ */
+ uint8_t dequeue_depth;
+ /**< Configure number of bulk dequeues for this event port.
+ * This value cannot exceed the *nb_event_port_dequeue_depth*
+ * which previously supplied to rte_event_dev_configure()
+ */
+ uint8_t enqueue_depth;
+ /**< Configure number of bulk enqueues for this event port.
+ * This value cannot exceed the *nb_event_port_enqueue_depth*
+ * which previously supplied to rte_event_dev_configure()
+ */
+};
+
+/**
+ * Retrieve the default configuration information of an event port designated
+ * by its *port_id* from the event driver for an event device.
+ *
+ * This function intended to be used in conjunction with rte_event_port_setup()
+ * where caller needs to set up the port by overriding few default values.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The index of the event port to get the configuration information.
+ * The value must be in the range [0, nb_event_ports - 1]
+ * previously supplied to rte_event_dev_configure().
+ * @param[out] port_conf
+ * The pointer to the default event port configuration data
+ * @return
+ * - 0: Success, driver updates the default event port configuration data.
+ * - <0: Error code returned by the driver info get function.
+ *
+ * @see rte_event_port_setup()
+ *
+ */
+int
+rte_event_port_default_conf_get(uint8_t dev_id, uint8_t port_id,
+ struct rte_event_port_conf *port_conf);
+
+/**
+ * Allocate and set up an event port for an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The index of the event port to setup. The value must be in the range
+ * [0, nb_event_ports - 1] previously supplied to rte_event_dev_configure().
+ * @param port_conf
+ * The pointer to the configuration data to be used for the queue.
+ * NULL value is allowed, in which case default configuration used.
+ *
+ * @see rte_event_port_default_conf_get()
+ *
+ * @return
+ * - 0: Success, event port correctly set up.
+ * - <0: Port configuration failed
+ * - (-EDQUOT) Quota exceeded(Application tried to link the queue configured
+ * with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
+ */
+int
+rte_event_port_setup(uint8_t dev_id, uint8_t port_id,
+ const struct rte_event_port_conf *port_conf);
+
+/**
+ * Get the number of dequeue queue depth configured for event port designated
+ * by its *port_id* on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param port_id
+ * Event port identifier.
+ * @return
+ * - The number of configured dequeue queue depth
+ *
+ * @see rte_event_dequeue_burst()
+ */
+uint8_t
+rte_event_port_dequeue_depth(uint8_t dev_id, uint8_t port_id);
+
+/**
+ * Get the number of enqueue queue depth configured for event port designated
+ * by its *port_id* on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param port_id
+ * Event port identifier.
+ * @return
+ * - The number of configured enqueue queue depth
+ *
+ * @see rte_event_enqueue_burst()
+ */
+uint8_t
+rte_event_port_enqueue_depth(uint8_t dev_id, uint8_t port_id);
+
+/**
+ * Get the number of ports on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @return
+ * - The number of configured ports
+ */
+uint8_t
+rte_event_port_count(uint8_t dev_id);
+
+/**
+ * Start an event device.
+ *
+ * The device start step is the last one and consists of setting the event
+ * queues to start accepting the events and schedules to event ports.
+ *
+ * On success, all basic functions exported by the API (event enqueue,
+ * event dequeue and so on) can be invoked.
+ *
+ * @param dev_id
+ * Event device identifier
+ * @return
+ * - 0: Success, device started.
+ * - <0: Error code of the driver device start function.
+ */
+int
+rte_event_dev_start(uint8_t dev_id);
+
+/**
+ * Stop an event device. The device can be restarted with a call to
+ * rte_event_dev_start()
+ *
+ * @param dev_id
+ * Event device identifier.
+ */
+void
+rte_event_dev_stop(uint8_t dev_id);
+
+/**
+ * Close an event device. The device cannot be restarted!
+ *
+ * @param dev_id
+ * Event device identifier
+ *
+ * @return
+ * - 0 on successfully closing device
+ * - <0 on failure to close device
+ * - (-EAGAIN) if device is busy
+ */
+int
+rte_event_dev_close(uint8_t dev_id);
+
+/* Scheduler type definitions */
+#define RTE_SCHED_TYPE_ORDERED 0
+/**< Ordered scheduling
+ *
+ * Events from an ordered flow of an event queue can be scheduled to multiple
+ * ports for concurrent processing while maintaining the original event order.
+ * This scheme enables the user to achieve high single flow throughput by
+ * avoiding SW synchronization for ordering between ports which bound to cores.
+ *
+ * The source flow ordering from an event queue is maintained when events are
+ * enqueued to their destination queue within the same ordered flow context.
+ * An event port holds the context until application call
+ * rte_event_dequeue_burst() from the same port, which implicitly releases
+ * the context.
+ * User may allow the scheduler to release the context earlier than that
+ * by invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation.
+ *
+ * Events from the source queue appear in their original order when dequeued
+ * from a destination queue.
+ * Event ordering is based on the received event(s), but also other
+ * (newly allocated or stored) events are ordered when enqueued within the same
+ * ordered context. Events not enqueued (e.g. released or stored) within the
+ * context are considered missing from reordering and are skipped at this time
+ * (but can be ordered again within another context).
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
+ */
+
+#define RTE_SCHED_TYPE_ATOMIC 1
+/**< Atomic scheduling
+ *
+ * Events from an atomic flow of an event queue can be scheduled only to a
+ * single port at a time. The port is guaranteed to have exclusive (atomic)
+ * access to the associated flow context, which enables the user to avoid SW
+ * synchronization. Atomic flows also help to maintain event ordering
+ * since only one port at a time can process events from a flow of an
+ * event queue.
+ *
+ * The atomic queue synchronization context is dedicated to the port until
+ * application call rte_event_dequeue_burst() from the same port,
+ * which implicitly releases the context. User may allow the scheduler to
+ * release the context earlier than that by invoking rte_event_enqueue_burst()
+ * with RTE_EVENT_OP_RELEASE operation.
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
+ */
+
+#define RTE_SCHED_TYPE_PARALLEL 2
+/**< Parallel scheduling
+ *
+ * The scheduler performs priority scheduling, load balancing, etc. functions
+ * but does not provide additional event synchronization or ordering.
+ * It is free to schedule events from a single parallel flow of an event queue
+ * to multiple events ports for concurrent processing.
+ * The application is responsible for flow context synchronization and
+ * event ordering (SW synchronization).
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst()
+ */
+
+/* Event types to classify the event source */
+#define RTE_EVENT_TYPE_ETHDEV 0x0
+/**< The event generated from ethdev subsystem */
+#define RTE_EVENT_TYPE_CRYPTODEV 0x1
+/**< The event generated from crypodev subsystem */
+#define RTE_EVENT_TYPE_TIMERDEV 0x2
+/**< The event generated from timerdev subsystem */
+#define RTE_EVENT_TYPE_CPU 0x3
+/**< The event generated from cpu for pipelining.
+ * Application may use *sub_event_type* to further classify the event
+ */
+#define RTE_EVENT_TYPE_MAX 0x10
+/**< Maximum number of event types */
+
+/* Event enqueue operations */
+#define RTE_EVENT_OP_NEW 0
+/**< The event producers use this operation to inject a new event to the
+ * event device.
+ */
+#define RTE_EVENT_OP_FORWARD 1
+/**< The CPU use this operation to forward the event to different event queue or
+ * change to new application specific flow or schedule type to enable
+ * pipelining
+ */
+#define RTE_EVENT_OP_RELEASE 2
+/**< Release the flow context associated with the schedule type.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_ATOMIC*
+ * then this function hints the scheduler that the user has completed critical
+ * section processing in the current atomic context.
+ * The scheduler is now allowed to schedule events from the same flow from
+ * an event queue to another port. However, the context may be still held
+ * until the next rte_event_dequeue_burst() call, this call allows but does not
+ * force the scheduler to release the context early.
+ *
+ * Early atomic context release may increase parallelism and thus system
+ * performance, but the user needs to design carefully the split into critical
+ * vs non-critical sections.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_ORDERED*
+ * then this function hints the scheduler that the user has done all that need
+ * to maintain event order in the current ordered context.
+ * The scheduler is allowed to release the ordered context of this port and
+ * avoid reordering any following enqueues.
+ *
+ * Early ordered context release may increase parallelism and thus system
+ * performance.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_PARALLEL*
+ * or no scheduling context is held then this function may be an NOOP,
+ * depending on the implementation.
+ *
+ */
+
+/**
+ * The generic *rte_event* structure to hold the event attributes
+ * for dequeue and enqueue operation
+ */
+struct rte_event {
+ /** WORD0 */
+ RTE_STD_C11
+ union {
+ uint64_t event;
+ /** Event attributes for dequeue or enqueue operation */
+ struct {
+ uint32_t flow_id:20;
+ /**< Targeted flow identifier for the enqueue and
+ * dequeue operation.
+ * The value must be in the range of
+ * [0, nb_event_queue_flows - 1] which
+ * previously supplied to rte_event_dev_configure().
+ */
+ uint32_t sub_event_type:8;
+ /**< Sub-event types based on the event source.
+ * @see RTE_EVENT_TYPE_CPU
+ */
+ uint32_t event_type:4;
+ /**< Event type to classify the event source.
+ * @see RTE_EVENT_TYPE_ETHDEV, (RTE_EVENT_TYPE_*)
+ */
+ uint8_t op:2;
+ /**< The type of event enqueue operation - new/forward/
+ * etc.This field is not preserved across an instance
+ * and is undefined on dequeue.
+ * @see RTE_EVENT_OP_NEW, (RTE_EVENT_OP_*)
+ */
+ uint8_t rsvd:4;
+ /**< Reserved for future use */
+ uint8_t sched_type:2;
+ /**< Scheduler synchronization type (RTE_SCHED_TYPE_*)
+ * associated with flow id on a given event queue
+ * for the enqueue and dequeue operation.
+ */
+ uint8_t queue_id;
+ /**< Targeted event queue identifier for the enqueue or
+ * dequeue operation.
+ * The value must be in the range of
+ * [0, nb_event_queues - 1] which previously supplied to
+ * rte_event_dev_configure().
+ */
+ uint8_t priority;
+ /**< Event priority relative to other events in the
+ * event queue. The requested priority should in the
+ * range of [RTE_EVENT_DEV_PRIORITY_HIGHEST,
+ * RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested
+ * priority to supported priority value.
+ * Valid when the device has
+ * RTE_EVENT_DEV_CAP_EVENT_QOS capability.
+ */
+ uint8_t impl_opaque;
+ /**< Implementation specific opaque value.
+ * An implementation may use this field to hold
+ * implementation specific value to share between
+ * dequeue and enqueue operation.
+ * The application should not modify this field.
+ */
+ };
+ };
+ /** WORD1 */
+ RTE_STD_C11
+ union {
+ uint64_t u64;
+ /**< Opaque 64-bit value */
+ void *event_ptr;
+ /**< Opaque event pointer */
+ struct rte_mbuf *mbuf;
+ /**< mbuf pointer if dequeued event is associated with mbuf */
+ };
+};
+
+/**
+ * Schedule one or more events in the event dev.
+ *
+ * An event dev implementation may define this is a NOOP, for instance if
+ * the event dev performs its scheduling in hardware.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ */
+void
+rte_event_schedule(uint8_t dev_id);
+
+/**
+ * Enqueue a burst of events objects or an event object supplied in *rte_event*
+ * structure on an event device designated by its *dev_id* through the event
+ * port specified by *port_id*. Each event object specifies the event queue on
+ * which it will be enqueued.
+ *
+ * The *nb_events* parameter is the number of event objects to enqueue which are
+ * supplied in the *ev* array of *rte_event* structure.
+ *
+ * The rte_event_enqueue_burst() function returns the number of
+ * events objects it actually enqueued. A return value equal to *nb_events*
+ * means that all event objects have been enqueued.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The identifier of the event port.
+ * @param ev
+ * Points to an array of *nb_events* objects of type *rte_event* structure
+ * which contain the event object enqueue operations to be processed.
+ * @param nb_events
+ * The number of event objects to enqueue, typically number of
+ * rte_event_port_enqueue_depth() available for this port.
+ *
+ * @return
+ * The number of event objects actually enqueued on the event device. The
+ * return value can be less than the value of the *nb_events* parameter when
+ * the event devices queue is full or if invalid parameters are specified in a
+ * *rte_event*. If return value is less than *nb_events*, the remaining events
+ * at the end of ev[] are not consumed,and the caller has to take care of them
+ *
+ * @see rte_event_port_enqueue_depth()
+ */
+uint16_t
+rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
+ const struct rte_event ev[], uint16_t nb_events);
+
+/**
+ * Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue_burst()
+ *
+ * If the device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT flag
+ * then application can use this function to convert timeout value in
+ * nanoseconds to implementations specific timeout value supplied in
+ * rte_event_dequeue_burst()
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param ns
+ * Wait time in nanosecond
+ * @param[out] timeout_ticks
+ * Value for the *timeout_ticks* parameter in rte_event_dequeue_burst()
+ *
+ * @return
+ * - 0 on success.
+ * - <0 on failure.
+ *
+ * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ * @see rte_event_dev_configure()
+ *
+ */
+int
+rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
+ uint64_t *timeout_ticks);
+
+/**
+ * Dequeue a burst of events objects or an event object from the event port
+ * designated by its *event_port_id*, on an event device designated
+ * by its *dev_id*.
+ *
+ * rte_event_dequeue_burst() does not dictate the specifics of scheduling
+ * algorithm as each eventdev driver may have different criteria to schedule
+ * an event. However, in general, from an application perspective scheduler may
+ * use the following scheme to dispatch an event to the port.
+ *
+ * 1) Selection of event queue based on
+ * a) The list of event queues are linked to the event port.
+ * b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event
+ * queue selection from list is based on event queue priority relative to
+ * other event queue supplied as *priority* in rte_event_queue_setup()
+ * c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event
+ * queue selection from the list is based on event priority supplied as
+ * *priority* in rte_event_enqueue_burst()
+ * 2) Selection of event
+ * a) The number of flows available in selected event queue.
+ * b) Schedule type method associated with the event
+ *
+ * The *nb_events* parameter is the maximum number of event objects to dequeue
+ * which are returned in the *ev* array of *rte_event* structure.
+ *
+ * The rte_event_dequeue_burst() function returns the number of events objects
+ * it actually dequeued. A return value equal to *nb_events* means that all
+ * event objects have been dequeued.
+ *
+ * The number of events dequeued is the number of scheduler contexts held by
+ * this port. These contexts are automatically released in the next
+ * rte_event_dequeue_burst() invocation, or invoking rte_event_enqueue_burst()
+ * with RTE_EVENT_OP_RELEASE operation can be used to release the
+ * contexts early.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The identifier of the event port.
+ * @param[out] ev
+ * Points to an array of *nb_events* objects of type *rte_event* structure
+ * for output to be populated with the dequeued event objects.
+ * @param nb_events
+ * The maximum number of event objects to dequeue, typically number of
+ * rte_event_port_dequeue_depth() available for this port.
+ *
+ * @param timeout_ticks
+ * - 0 no-wait, returns immediately if there is no event.
+ * - >0 wait for the event, if the device is configured with
+ * RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until
+ * the event available or *timeout_ticks* time.
+ * if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ * then this function will wait until the event available or
+ * *dequeue_timeout_ns* ns which was previously supplied to
+ * rte_event_dev_configure()
+ *
+ * @return
+ * The number of event objects actually dequeued from the port. The return
+ * value can be less than the value of the *nb_events* parameter when the
+ * event port's queue is not full.
+ *
+ * @see rte_event_port_dequeue_depth()
+ */
+uint16_t
+rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[],
+ uint16_t nb_events, uint64_t timeout_ticks);
+
+/**
+ * Link multiple source event queues supplied in *queues* to the destination
+ * event port designated by its *port_id* with associated service priority
+ * supplied in *priorities* on the event device designated by its *dev_id*.
+ *
+ * The link establishment shall enable the event port *port_id* from
+ * receiving events from the specified event queue(s) supplied in *queues*
+ *
+ * An event queue may link to one or more event ports.
+ * The number of links can be established from an event queue to event port is
+ * implementation defined.
+ *
+ * Event queue(s) to event port link establishment can be changed at runtime
+ * without re-configuring the device to support scaling and to reduce the
+ * latency of critical work by establishing the link with more event ports
+ * at runtime.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier to select the destination port to link.
+ *
+ * @param queues
+ * Points to an array of *nb_links* event queues to be linked
+ * to the event port.
+ * NULL value is allowed, in which case this function links all the configured
+ * event queues *nb_event_queues* which previously supplied to
+ * rte_event_dev_configure() to the event port *port_id*
+ *
+ * @param priorities
+ * Points to an array of *nb_links* service priorities associated with each
+ * event queue link to event port.
+ * The priority defines the event port's servicing priority for
+ * event queue, which may be ignored by an implementation.
+ * The requested priority should in the range of
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested priority to
+ * implementation supported priority value.
+ * NULL value is allowed, in which case this function links the event queues
+ * with RTE_EVENT_DEV_PRIORITY_NORMAL servicing priority
+ *
+ * @param nb_links
+ * The number of links to establish
+ *
+ * @return
+ * The number of links actually established. The return value can be less than
+ * the value of the *nb_links* parameter when the implementation has the
+ * limitation on specific queue to port link establishment or if invalid
+ * parameters are specified in *queues*
+ * If the return value is less than *nb_links*, the remaining links at the end
+ * of link[] are not established, and the caller has to take care of them.
+ * If return value is less than *nb_links* then implementation shall update the
+ * rte_errno accordingly, Possible rte_errno values are
+ * (-EDQUOT) Quota exceeded(Application tried to link the queue configured with
+ * RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
+ * (-EINVAL) Invalid parameter
+ *
+ */
+int
+rte_event_port_link(uint8_t dev_id, uint8_t port_id,
+ const uint8_t queues[], const uint8_t priorities[],
+ uint16_t nb_links);
+
+/**
+ * Unlink multiple source event queues supplied in *queues* from the destination
+ * event port designated by its *port_id* on the event device designated
+ * by its *dev_id*.
+ *
+ * The unlink establishment shall disable the event port *port_id* from
+ * receiving events from the specified event queue *queue_id*
+ *
+ * Event queue(s) to event port unlink establishment can be changed at runtime
+ * without re-configuring the device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier to select the destination port to unlink.
+ *
+ * @param queues
+ * Points to an array of *nb_unlinks* event queues to be unlinked
+ * from the event port.
+ * NULL value is allowed, in which case this function unlinks all the
+ * event queue(s) from the event port *port_id*.
+ *
+ * @param nb_unlinks
+ * The number of unlinks to establish
+ *
+ * @return
+ * The number of unlinks actually established. The return value can be less
+ * than the value of the *nb_unlinks* parameter when the implementation has the
+ * limitation on specific queue to port unlink establishment or
+ * if invalid parameters are specified.
+ * If the return value is less than *nb_unlinks*, the remaining queues at the
+ * end of queues[] are not established, and the caller has to take care of them.
+ * If return value is less than *nb_unlinks* then implementation shall update
+ * the rte_errno accordingly, Possible rte_errno values are
+ * (-EINVAL) Invalid parameter
+ *
+ */
+int
+rte_event_port_unlink(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint16_t nb_unlinks);
+
+/**
+ * Retrieve the list of source event queues and its associated service priority
+ * linked to the destination event port designated by its *port_id*
+ * on the event device designated by its *dev_id*.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier.
+ *
+ * @param[out] queues
+ * Points to an array of *queues* for output.
+ * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
+ * store the event queue(s) linked with event port *port_id*
+ *
+ * @param[out] priorities
+ * Points to an array of *priorities* for output.
+ * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
+ * store the service priority associated with each event queue linked
+ *
+ * @return
+ * The number of links established on the event port designated by its
+ * *port_id*.
+ * - <0 on failure.
+ *
+ */
+int
+rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint8_t priorities[]);
+
+/**
+ * Dump internal information about *dev_id* to the FILE* provided in *f*.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param f
+ * A pointer to a file for output
+ *
+ * @return
+ * - 0: on success
+ * - <0: on failure.
+ */
+int
+rte_event_dev_dump(uint8_t dev_id, FILE *f);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_EVENTDEV_H_ */
git.droids-corp.org / dpdk.git / commitdiff