#include "nicvf_rxtx.h"
#include "nicvf_logs.h"
+static void nicvf_dev_stop(struct rte_eth_dev *dev);
+
static inline int
nicvf_atomic_write_link_status(struct rte_eth_dev *dev,
struct rte_eth_link *link)
return 0;
}
+static int
+nicvf_qset_rbdr_alloc(struct nicvf *nic, uint32_t desc_cnt, uint32_t buffsz)
+{
+ struct nicvf_rbdr *rbdr;
+ const struct rte_memzone *rz;
+ uint32_t ring_size;
+
+ assert(nic->rbdr == NULL);
+ rbdr = rte_zmalloc_socket("rbdr", sizeof(struct nicvf_rbdr),
+ RTE_CACHE_LINE_SIZE, nic->node);
+ if (rbdr == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate mem for rbdr");
+ return -ENOMEM;
+ }
+
+ ring_size = sizeof(struct rbdr_entry_t) * desc_cnt;
+ rz = rte_eth_dma_zone_reserve(nic->eth_dev, "rbdr", 0, ring_size,
+ NICVF_RBDR_BASE_ALIGN_BYTES, nic->node);
+ if (rz == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate mem for rbdr desc ring");
+ return -ENOMEM;
+ }
+
+ memset(rz->addr, 0, ring_size);
+
+ rbdr->phys = rz->phys_addr;
+ rbdr->tail = 0;
+ rbdr->next_tail = 0;
+ rbdr->desc = rz->addr;
+ rbdr->buffsz = buffsz;
+ rbdr->qlen_mask = desc_cnt - 1;
+ rbdr->rbdr_status =
+ nicvf_qset_base(nic, 0) + NIC_QSET_RBDR_0_1_STATUS0;
+ rbdr->rbdr_door =
+ nicvf_qset_base(nic, 0) + NIC_QSET_RBDR_0_1_DOOR;
+
+ nic->rbdr = rbdr;
+ return 0;
+}
+
+static void
+nicvf_rbdr_release_mbuf(struct nicvf *nic, nicvf_phys_addr_t phy)
+{
+ uint16_t qidx;
+ void *obj;
+ struct nicvf_rxq *rxq;
+
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = nic->eth_dev->data->rx_queues[qidx];
+ if (rxq->precharge_cnt) {
+ obj = (void *)nicvf_mbuff_phy2virt(phy,
+ rxq->mbuf_phys_off);
+ rte_mempool_put(rxq->pool, obj);
+ rxq->precharge_cnt--;
+ break;
+ }
+ }
+}
+
+static inline void
+nicvf_rbdr_release_mbufs(struct nicvf *nic)
+{
+ uint32_t qlen_mask, head;
+ struct rbdr_entry_t *entry;
+ struct nicvf_rbdr *rbdr = nic->rbdr;
+
+ qlen_mask = rbdr->qlen_mask;
+ head = rbdr->head;
+ while (head != rbdr->tail) {
+ entry = rbdr->desc + head;
+ nicvf_rbdr_release_mbuf(nic, entry->full_addr);
+ head++;
+ head = head & qlen_mask;
+ }
+}
+
static inline void
nicvf_tx_queue_release_mbufs(struct nicvf_txq *txq)
{
return ret;
}
+static inline int
+nicvf_configure_rss(struct rte_eth_dev *dev)
+{
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+ uint64_t rsshf;
+ int ret = -EINVAL;
+
+ rsshf = nicvf_rss_ethdev_to_nic(nic,
+ dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf);
+ PMD_DRV_LOG(INFO, "mode=%d rx_queues=%d loopback=%d rsshf=0x%" PRIx64,
+ dev->data->dev_conf.rxmode.mq_mode,
+ nic->eth_dev->data->nb_rx_queues,
+ nic->eth_dev->data->dev_conf.lpbk_mode, rsshf);
+
+ if (dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_NONE)
+ ret = nicvf_rss_term(nic);
+ else if (dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_RSS)
+ ret = nicvf_rss_config(nic,
+ nic->eth_dev->data->nb_rx_queues, rsshf);
+ if (ret)
+ PMD_INIT_LOG(ERR, "Failed to configure RSS %d", ret);
+
+ return ret;
+}
+
static int
nicvf_configure_rss_reta(struct rte_eth_dev *dev)
{
}
}
+static void
+nicvf_set_tx_function(struct rte_eth_dev *dev)
+{
+ struct nicvf_txq *txq;
+ size_t i;
+ bool multiseg = false;
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+ if ((txq->txq_flags & ETH_TXQ_FLAGS_NOMULTSEGS) == 0) {
+ multiseg = true;
+ break;
+ }
+ }
+
+ /* Use a simple Tx queue (no offloads, no multi segs) if possible */
+ if (multiseg) {
+ PMD_DRV_LOG(DEBUG, "Using multi-segment tx callback");
+ dev->tx_pkt_burst = nicvf_xmit_pkts_multiseg;
+ } else {
+ PMD_DRV_LOG(DEBUG, "Using single-segment tx callback");
+ dev->tx_pkt_burst = nicvf_xmit_pkts;
+ }
+
+ if (txq->pool_free == nicvf_single_pool_free_xmited_buffers)
+ PMD_DRV_LOG(DEBUG, "Using single-mempool tx free method");
+ else
+ PMD_DRV_LOG(DEBUG, "Using multi-mempool tx free method");
+}
+
+static void
+nicvf_set_rx_function(struct rte_eth_dev *dev)
+{
+ if (dev->data->scattered_rx) {
+ PMD_DRV_LOG(DEBUG, "Using multi-segment rx callback");
+ dev->rx_pkt_burst = nicvf_recv_pkts_multiseg;
+ } else {
+ PMD_DRV_LOG(DEBUG, "Using single-segment rx callback");
+ dev->rx_pkt_burst = nicvf_recv_pkts;
+ }
+}
+
static int
nicvf_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
uint16_t nb_desc, unsigned int socket_id,
};
}
+static nicvf_phys_addr_t
+rbdr_rte_mempool_get(void *opaque)
+{
+ uint16_t qidx;
+ uintptr_t mbuf;
+ struct nicvf_rxq *rxq;
+ struct nicvf *nic = nicvf_pmd_priv((struct rte_eth_dev *)opaque);
+
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = nic->eth_dev->data->rx_queues[qidx];
+ /* Maintain equal buffer count across all pools */
+ if (rxq->precharge_cnt >= rxq->qlen_mask)
+ continue;
+ rxq->precharge_cnt++;
+ mbuf = (uintptr_t)rte_pktmbuf_alloc(rxq->pool);
+ if (mbuf)
+ return nicvf_mbuff_virt2phy(mbuf, rxq->mbuf_phys_off);
+ }
+ return 0;
+}
+
+static int
+nicvf_dev_start(struct rte_eth_dev *dev)
+{
+ int ret;
+ uint16_t qidx;
+ uint32_t buffsz = 0, rbdrsz = 0;
+ uint32_t total_rxq_desc, nb_rbdr_desc, exp_buffs;
+ uint64_t mbuf_phys_off = 0;
+ struct nicvf_rxq *rxq;
+ struct rte_pktmbuf_pool_private *mbp_priv;
+ struct rte_mbuf *mbuf;
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+ struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
+ uint16_t mtu;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Userspace process exited without proper shutdown in last run */
+ if (nicvf_qset_rbdr_active(nic, 0))
+ nicvf_dev_stop(dev);
+
+ /*
+ * Thunderx nicvf PMD can support more than one pool per port only when
+ * 1) Data payload size is same across all the pools in given port
+ * AND
+ * 2) All mbuffs in the pools are from the same hugepage
+ * AND
+ * 3) Mbuff metadata size is same across all the pools in given port
+ *
+ * This is to support existing application that uses multiple pool/port.
+ * But, the purpose of using multipool for QoS will not be addressed.
+ *
+ */
+
+ /* Validate RBDR buff size */
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = dev->data->rx_queues[qidx];
+ mbp_priv = rte_mempool_get_priv(rxq->pool);
+ buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
+ if (buffsz % 128) {
+ PMD_INIT_LOG(ERR, "rxbuf size must be multiply of 128");
+ return -EINVAL;
+ }
+ if (rbdrsz == 0)
+ rbdrsz = buffsz;
+ if (rbdrsz != buffsz) {
+ PMD_INIT_LOG(ERR, "buffsz not same, qid=%d (%d/%d)",
+ qidx, rbdrsz, buffsz);
+ return -EINVAL;
+ }
+ }
+
+ /* Validate mempool attributes */
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = dev->data->rx_queues[qidx];
+ rxq->mbuf_phys_off = nicvf_mempool_phy_offset(rxq->pool);
+ mbuf = rte_pktmbuf_alloc(rxq->pool);
+ if (mbuf == NULL) {
+ PMD_INIT_LOG(ERR, "Failed allocate mbuf qid=%d pool=%s",
+ qidx, rxq->pool->name);
+ return -ENOMEM;
+ }
+ rxq->mbuf_phys_off -= nicvf_mbuff_meta_length(mbuf);
+ rxq->mbuf_phys_off -= RTE_PKTMBUF_HEADROOM;
+ rte_pktmbuf_free(mbuf);
+
+ if (mbuf_phys_off == 0)
+ mbuf_phys_off = rxq->mbuf_phys_off;
+ if (mbuf_phys_off != rxq->mbuf_phys_off) {
+ PMD_INIT_LOG(ERR, "pool params not same,%s %" PRIx64,
+ rxq->pool->name, mbuf_phys_off);
+ return -EINVAL;
+ }
+ }
+
+ /* Check the level of buffers in the pool */
+ total_rxq_desc = 0;
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ rxq = dev->data->rx_queues[qidx];
+ /* Count total numbers of rxq descs */
+ total_rxq_desc += rxq->qlen_mask + 1;
+ exp_buffs = RTE_MEMPOOL_CACHE_MAX_SIZE + rxq->rx_free_thresh;
+ exp_buffs *= nic->eth_dev->data->nb_rx_queues;
+ if (rte_mempool_count(rxq->pool) < exp_buffs) {
+ PMD_INIT_LOG(ERR, "Buff shortage in pool=%s (%d/%d)",
+ rxq->pool->name,
+ rte_mempool_count(rxq->pool),
+ exp_buffs);
+ return -ENOENT;
+ }
+ }
+
+ /* Check RBDR desc overflow */
+ ret = nicvf_qsize_rbdr_roundup(total_rxq_desc);
+ if (ret == 0) {
+ PMD_INIT_LOG(ERR, "Reached RBDR desc limit, reduce nr desc");
+ return -ENOMEM;
+ }
+
+ /* Enable qset */
+ ret = nicvf_qset_config(nic);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to enable qset %d", ret);
+ return ret;
+ }
+
+ /* Allocate RBDR and RBDR ring desc */
+ nb_rbdr_desc = nicvf_qsize_rbdr_roundup(total_rxq_desc);
+ ret = nicvf_qset_rbdr_alloc(nic, nb_rbdr_desc, rbdrsz);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to allocate memory for rbdr alloc");
+ goto qset_reclaim;
+ }
+
+ /* Enable and configure RBDR registers */
+ ret = nicvf_qset_rbdr_config(nic, 0);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to configure rbdr %d", ret);
+ goto qset_rbdr_free;
+ }
+
+ /* Fill rte_mempool buffers in RBDR pool and precharge it */
+ ret = nicvf_qset_rbdr_precharge(nic, 0, rbdr_rte_mempool_get,
+ dev, total_rxq_desc);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to fill rbdr %d", ret);
+ goto qset_rbdr_reclaim;
+ }
+
+ PMD_DRV_LOG(INFO, "Filled %d out of %d entries in RBDR",
+ nic->rbdr->tail, nb_rbdr_desc);
+
+ /* Configure RX queues */
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++) {
+ ret = nicvf_start_rx_queue(dev, qidx);
+ if (ret)
+ goto start_rxq_error;
+ }
+
+ /* Configure VLAN Strip */
+ nicvf_vlan_hw_strip(nic, dev->data->dev_conf.rxmode.hw_vlan_strip);
+
+ /* Configure TX queues */
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_tx_queues; qidx++) {
+ ret = nicvf_start_tx_queue(dev, qidx);
+ if (ret)
+ goto start_txq_error;
+ }
+
+ /* Configure CPI algorithm */
+ ret = nicvf_configure_cpi(dev);
+ if (ret)
+ goto start_txq_error;
+
+ /* Configure RSS */
+ ret = nicvf_configure_rss(dev);
+ if (ret)
+ goto qset_rss_error;
+
+ /* Configure loopback */
+ ret = nicvf_loopback_config(nic, dev->data->dev_conf.lpbk_mode);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to configure loopback %d", ret);
+ goto qset_rss_error;
+ }
+
+ /* Reset all statistics counters attached to this port */
+ ret = nicvf_mbox_reset_stat_counters(nic, 0x3FFF, 0x1F, 0xFFFF, 0xFFFF);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failed to reset stat counters %d", ret);
+ goto qset_rss_error;
+ }
+
+ /* Setup scatter mode if needed by jumbo */
+ if (dev->data->dev_conf.rxmode.max_rx_pkt_len +
+ 2 * VLAN_TAG_SIZE > buffsz)
+ dev->data->scattered_rx = 1;
+ if (rx_conf->enable_scatter)
+ dev->data->scattered_rx = 1;
+
+ /* Setup MTU based on max_rx_pkt_len or default */
+ mtu = dev->data->dev_conf.rxmode.jumbo_frame ?
+ dev->data->dev_conf.rxmode.max_rx_pkt_len
+ - ETHER_HDR_LEN - ETHER_CRC_LEN
+ : ETHER_MTU;
+
+ if (nicvf_dev_set_mtu(dev, mtu)) {
+ PMD_INIT_LOG(ERR, "Failed to set default mtu size");
+ return -EBUSY;
+ }
+
+ /* Configure callbacks based on scatter mode */
+ nicvf_set_tx_function(dev);
+ nicvf_set_rx_function(dev);
+
+ /* Done; Let PF make the BGX's RX and TX switches to ON position */
+ nicvf_mbox_cfg_done(nic);
+ return 0;
+
+qset_rss_error:
+ nicvf_rss_term(nic);
+start_txq_error:
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_tx_queues; qidx++)
+ nicvf_stop_tx_queue(dev, qidx);
+start_rxq_error:
+ for (qidx = 0; qidx < nic->eth_dev->data->nb_rx_queues; qidx++)
+ nicvf_stop_rx_queue(dev, qidx);
+qset_rbdr_reclaim:
+ nicvf_qset_rbdr_reclaim(nic, 0);
+ nicvf_rbdr_release_mbufs(nic);
+qset_rbdr_free:
+ if (nic->rbdr) {
+ rte_free(nic->rbdr);
+ nic->rbdr = NULL;
+ }
+qset_reclaim:
+ nicvf_qset_reclaim(nic);
+ return ret;
+}
+
+static void
+nicvf_dev_stop(struct rte_eth_dev *dev)
+{
+ int ret;
+ uint16_t qidx;
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Let PF make the BGX's RX and TX switches to OFF position */
+ nicvf_mbox_shutdown(nic);
+
+ /* Disable loopback */
+ ret = nicvf_loopback_config(nic, 0);
+ if (ret)
+ PMD_INIT_LOG(ERR, "Failed to disable loopback %d", ret);
+
+ /* Disable VLAN Strip */
+ nicvf_vlan_hw_strip(nic, 0);
+
+ /* Reclaim sq */
+ for (qidx = 0; qidx < dev->data->nb_tx_queues; qidx++)
+ nicvf_stop_tx_queue(dev, qidx);
+
+ /* Reclaim rq */
+ for (qidx = 0; qidx < dev->data->nb_rx_queues; qidx++)
+ nicvf_stop_rx_queue(dev, qidx);
+
+ /* Reclaim RBDR */
+ ret = nicvf_qset_rbdr_reclaim(nic, 0);
+ if (ret)
+ PMD_INIT_LOG(ERR, "Failed to reclaim RBDR %d", ret);
+
+ /* Move all charged buffers in RBDR back to pool */
+ if (nic->rbdr != NULL)
+ nicvf_rbdr_release_mbufs(nic);
+
+ /* Reclaim CPI configuration */
+ if (!nic->sqs_mode) {
+ ret = nicvf_mbox_config_cpi(nic, 0);
+ if (ret)
+ PMD_INIT_LOG(ERR, "Failed to reclaim CPI config");
+ }
+
+ /* Disable qset */
+ ret = nicvf_qset_config(nic);
+ if (ret)
+ PMD_INIT_LOG(ERR, "Failed to disable qset %d", ret);
+
+ /* Disable all interrupts */
+ nicvf_disable_all_interrupts(nic);
+
+ /* Free RBDR SW structure */
+ if (nic->rbdr) {
+ rte_free(nic->rbdr);
+ nic->rbdr = NULL;
+ }
+}
+
+static void
+nicvf_dev_close(struct rte_eth_dev *dev)
+{
+ struct nicvf *nic = nicvf_pmd_priv(dev);
+
+ PMD_INIT_FUNC_TRACE();
+
+ nicvf_dev_stop(dev);
+ nicvf_periodic_alarm_stop(nic);
+}
+
static int
nicvf_dev_configure(struct rte_eth_dev *dev)
{
/* Initialize and register driver with DPDK Application */
static const struct eth_dev_ops nicvf_eth_dev_ops = {
.dev_configure = nicvf_dev_configure,
+ .dev_start = nicvf_dev_start,
+ .dev_stop = nicvf_dev_stop,
.link_update = nicvf_dev_link_update,
+ .dev_close = nicvf_dev_close,
.stats_get = nicvf_dev_stats_get,
.stats_reset = nicvf_dev_stats_reset,
.promiscuous_enable = nicvf_dev_promisc_enable,
eth_dev->dev_ops = &nicvf_eth_dev_ops;
+ /* For secondary processes, the primary has done all the work */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ /* Setup callbacks for secondary process */
+ nicvf_set_tx_function(eth_dev);
+ nicvf_set_rx_function(eth_dev);
+ return 0;
+ }
+
pci_dev = eth_dev->pci_dev;
rte_eth_copy_pci_info(eth_dev, pci_dev);
git.droids-corp.org / dpdk.git / commitdiff