ixgbe: fix VF start with PF stopped
authorCunming Liang <cunming.liang@intel.com>
Wed, 4 Nov 2015 08:45:35 +0000 (16:45 +0800)
committerThomas Monjalon <thomas.monjalon@6wind.com>
Wed, 4 Nov 2015 14:27:42 +0000 (15:27 +0100)
When ixgbe runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
doc/guides/rel_notes/release_2_2.rst
drivers/net/ixgbe/ixgbe_ethdev.c

index 4ad9287..80ccd85 100644 (file)
@@ -128,6 +128,10 @@ Drivers
 
   Fixed issue where a burst size less than 32 didn't receive anything.
 
+* **ixgbe: Fixed VF start with PF stopped.**
+
+  VF needs the PF interrupt support initialized even if not started.
+
 * **i40e: Fixed base driver allocation when not using first numa node.**
 
   Fixed i40e issue that occurred when a DPDK application didn't initialize
@@ -162,6 +166,7 @@ Drivers
   hardware transactional memory support, thread scaling did not work,
   due to the global ring that is shared by all cores.
 
+
 Libraries
 ~~~~~~~~~
 
index f1a738c..c322168 100644 (file)
@@ -1126,6 +1126,13 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
                        eth_dev->data->port_id, pci_dev->id.vendor_id,
                        pci_dev->id.device_id);
 
+       rte_intr_callback_register(&pci_dev->intr_handle,
+                                  ixgbe_dev_interrupt_handler,
+                                  (void *)eth_dev);
+
+       /* enable uio/vfio intr/eventfd mapping */
+       rte_intr_enable(&pci_dev->intr_handle);
+
        /* enable support intr */
        ixgbe_enable_intr(eth_dev);
 
@@ -1975,7 +1982,9 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
        ixgbe_pf_host_configure(dev);
 
        /* check and configure queue intr-vector mapping */
-       if (dev->data->dev_conf.intr_conf.rxq != 0) {
+       if ((rte_intr_cap_multiple(intr_handle) ||
+            !RTE_ETH_DEV_SRIOV(dev).active) &&
+           dev->data->dev_conf.intr_conf.rxq != 0) {
                intr_vector = dev->data->nb_rx_queues;
                if (rte_intr_efd_enable(intr_handle, intr_vector))
                        return -1;
@@ -1984,8 +1993,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
        if (rte_intr_dp_is_en(intr_handle) && !intr_handle->intr_vec) {
                intr_handle->intr_vec =
                        rte_zmalloc("intr_vec",
-                                   dev->data->nb_rx_queues * sizeof(int),
-                                   0);
+                                   dev->data->nb_rx_queues * sizeof(int), 0);
                if (intr_handle->intr_vec == NULL) {
                        PMD_INIT_LOG(ERR, "Failed to allocate %d rx_queues"
                                     " intr_vec\n", dev->data->nb_rx_queues);
@@ -2072,20 +2080,22 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 
 skip_link_setup:
 
-       /* check if lsc interrupt is enabled */
-       if (dev->data->dev_conf.intr_conf.lsc != 0) {
-               if (rte_intr_allow_others(intr_handle)) {
-                       rte_intr_callback_register(intr_handle,
-                                                  ixgbe_dev_interrupt_handler,
-                                                  (void *)dev);
+       if (rte_intr_allow_others(intr_handle)) {
+               /* check if lsc interrupt is enabled */
+               if (dev->data->dev_conf.intr_conf.lsc != 0)
                        ixgbe_dev_lsc_interrupt_setup(dev);
-               } else
+       } else {
+               rte_intr_callback_unregister(intr_handle,
+                                            ixgbe_dev_interrupt_handler,
+                                            (void *)dev);
+               if (dev->data->dev_conf.intr_conf.lsc != 0)
                        PMD_INIT_LOG(INFO, "lsc won't enable because of"
                                     " no intr multiplex\n");
        }
 
        /* check if rxq interrupt is enabled */
-       if (dev->data->dev_conf.intr_conf.rxq != 0)
+       if (dev->data->dev_conf.intr_conf.rxq != 0 &&
+           rte_intr_dp_is_en(intr_handle))
                ixgbe_dev_rxq_interrupt_setup(dev);
 
        /* enable uio/vfio intr/eventfd mapping */
@@ -2197,6 +2207,12 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
        memset(filter_info->fivetuple_mask, 0,
                sizeof(uint32_t) * IXGBE_5TUPLE_ARRAY_SIZE);
 
+       if (!rte_intr_allow_others(intr_handle))
+               /* resume to the default handler */
+               rte_intr_callback_register(intr_handle,
+                                          ixgbe_dev_interrupt_handler,
+                                          (void *)dev);
+
        /* Clean datapath event and queue/vec mapping */
        rte_intr_efd_disable(intr_handle);
        if (intr_handle->intr_vec != NULL) {