net/txgbe: support VF get link status
authorJiawen Wu <jiawenwu@trustnetic.com>
Thu, 25 Feb 2021 08:08:50 +0000 (16:08 +0800)
committerFerruh Yigit <ferruh.yigit@intel.com>
Fri, 26 Feb 2021 13:13:03 +0000 (14:13 +0100)
Add support to get link speed, duplex mode and state of VF device.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
doc/guides/nics/features/txgbe_vf.ini
drivers/net/txgbe/base/txgbe_vf.c
drivers/net/txgbe/base/txgbe_vf.h
drivers/net/txgbe/txgbe_ethdev_vf.c

index 67aa9e4..d816045 100644 (file)
@@ -4,6 +4,7 @@
 ; Refer to default.ini for the full list of available PMD features.
 ;
 [Features]
+Link status          = Y
 Unicast MAC filter   = Y
 Rx interrupt         = Y
 CRC offload          = P
index fadecaa..20ba0b8 100644 (file)
@@ -27,6 +27,9 @@ s32 txgbe_init_ops_vf(struct txgbe_hw *hw)
        mac->stop_hw = txgbe_stop_hw_vf;
        mac->negotiate_api_version = txgbevf_negotiate_api_version;
 
+       /* Link */
+       mac->check_link = txgbe_check_mac_link_vf;
+
        /* RAR, Multicast, VLAN */
        mac->set_rar = txgbe_set_rar_vf;
        mac->set_uc_addr = txgbevf_set_uc_addr_vf;
@@ -297,6 +300,102 @@ s32 txgbevf_set_uc_addr_vf(struct txgbe_hw *hw, u32 index, u8 *addr)
        return ret_val;
 }
 
+/**
+ *  txgbe_check_mac_link_vf - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 txgbe_check_mac_link_vf(struct txgbe_hw *hw, u32 *speed,
+                           bool *link_up, bool wait_to_complete)
+{
+       /**
+        * for a quick link status checking, wait_to_compelet == 0,
+        * skip PF link status checking
+        */
+       bool no_pflink_check = wait_to_complete == 0;
+       struct txgbe_mbx_info *mbx = &hw->mbx;
+       struct txgbe_mac_info *mac = &hw->mac;
+       s32 ret_val = 0;
+       u32 links_reg;
+       u32 in_msg = 0;
+
+       /* If we were hit with a reset drop the link */
+       if (!mbx->check_for_rst(hw, 0) || !mbx->timeout)
+               mac->get_link_status = true;
+
+       if (!mac->get_link_status)
+               goto out;
+
+       /* if link status is down no point in checking to see if pf is up */
+       links_reg = rd32(hw, TXGBE_VFSTATUS);
+       if (!(links_reg & TXGBE_VFSTATUS_UP))
+               goto out;
+
+       /* for SFP+ modules and DA cables it can take up to 500usecs
+        * before the link status is correct
+        */
+       if (mac->type == txgbe_mac_raptor_vf && wait_to_complete) {
+               if (po32m(hw, TXGBE_VFSTATUS, TXGBE_VFSTATUS_UP,
+                       0, NULL, 5, 100))
+                       goto out;
+       }
+
+       switch (links_reg & TXGBE_VFSTATUS_BW_MASK) {
+       case TXGBE_VFSTATUS_BW_10G:
+               *speed = TXGBE_LINK_SPEED_10GB_FULL;
+               break;
+       case TXGBE_VFSTATUS_BW_1G:
+               *speed = TXGBE_LINK_SPEED_1GB_FULL;
+               break;
+       case TXGBE_VFSTATUS_BW_100M:
+               *speed = TXGBE_LINK_SPEED_100M_FULL;
+               break;
+       default:
+               *speed = TXGBE_LINK_SPEED_UNKNOWN;
+       }
+
+       if (no_pflink_check) {
+               if (*speed == TXGBE_LINK_SPEED_UNKNOWN)
+                       mac->get_link_status = true;
+               else
+                       mac->get_link_status = false;
+
+               goto out;
+       }
+
+       /* if the read failed it could just be a mailbox collision, best wait
+        * until we are called again and don't report an error
+        */
+       if (mbx->read(hw, &in_msg, 1, 0))
+               goto out;
+
+       if (!(in_msg & TXGBE_VT_MSGTYPE_CTS)) {
+               /* msg is not CTS and is NACK we must have lost CTS status */
+               if (in_msg & TXGBE_VT_MSGTYPE_NACK)
+                       ret_val = -1;
+               goto out;
+       }
+
+       /* the pf is talking, if we timed out in the past we reinit */
+       if (!mbx->timeout) {
+               ret_val = -1;
+               goto out;
+       }
+
+       /* if we passed all the tests above then the link is up and we no
+        * longer need to check for link
+        */
+       mac->get_link_status = false;
+
+out:
+       *link_up = !mac->get_link_status;
+       return ret_val;
+}
+
 /**
  *  txgbevf_negotiate_api_version - Negotiate supported API version
  *  @hw: pointer to the HW structure
index f8c6532..f40a8f0 100644 (file)
@@ -15,6 +15,8 @@ s32 txgbe_start_hw_vf(struct txgbe_hw *hw);
 s32 txgbe_reset_hw_vf(struct txgbe_hw *hw);
 s32 txgbe_stop_hw_vf(struct txgbe_hw *hw);
 s32 txgbe_get_mac_addr_vf(struct txgbe_hw *hw, u8 *mac_addr);
+s32 txgbe_check_mac_link_vf(struct txgbe_hw *hw, u32 *speed,
+                           bool *link_up, bool autoneg_wait_to_complete);
 s32 txgbe_set_rar_vf(struct txgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
                     u32 enable_addr);
 s32 txgbevf_set_uc_addr_vf(struct txgbe_hw *hw, u32 index, u8 *addr);
index 9c6463d..6a5180e 100644 (file)
@@ -17,6 +17,8 @@
 
 static int txgbevf_dev_info_get(struct rte_eth_dev *dev,
                                 struct rte_eth_dev_info *dev_info);
+static int txgbevf_dev_link_update(struct rte_eth_dev *dev,
+                                  int wait_to_complete);
 static int txgbevf_dev_close(struct rte_eth_dev *dev);
 static void txgbevf_intr_disable(struct rte_eth_dev *dev);
 static void txgbevf_intr_enable(struct rte_eth_dev *dev);
@@ -319,6 +321,12 @@ txgbevf_dev_info_get(struct rte_eth_dev *dev,
        return 0;
 }
 
+static int
+txgbevf_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+       return txgbe_dev_link_update_share(dev, wait_to_complete);
+}
+
 /*
  * Virtual Function operations
  */
@@ -652,6 +660,7 @@ txgbevf_dev_interrupt_handler(void *param)
  * operation have been implemented
  */
 static const struct eth_dev_ops txgbevf_eth_dev_ops = {
+       .link_update          = txgbevf_dev_link_update,
        .dev_infos_get        = txgbevf_dev_info_get,
        .rx_queue_intr_enable = txgbevf_dev_rx_queue_intr_enable,
        .rx_queue_intr_disable = txgbevf_dev_rx_queue_intr_disable,