--- /dev/null
+; BSD LICENSE
+;
+; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; * Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; * Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in
+; the documentation and/or other materials provided with the
+; distribution.
+; * Neither the name of Intel Corporation nor the names of its
+; contributors may be used to endorse or promote products derived
+; from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+; An edge router typically sits between two networks such as the provider
+; core network and the provider access network. A typical packet processing
+; pipeline for the downstream traffic (i.e. traffic from core to access
+; network) contains the following functional blocks: Packet RX & Routing,
+; Traffic management and Packet TX. The input packets are assumed to be
+; IPv4, while the output packets are Q-in-Q IPv4.
+
+; A simple implementation for this functional pipeline is presented below.
+
+; Packet Rx & Traffic Management Packet Tx
+; Routing (Pass-Through) (Pass-Through)
+; _____________________ SWQ0 ______________________ SWQ4 _____________________
+; RXQ0.0 --->| |----->| |----->| |---> TXQ0.0
+; | | SWQ1 | | SWQ5 | |
+; RXQ1.0 --->| |----->| |----->| |---> TXQ1.0
+; | (P1) | SWQ2 | (P2) | SWQ6 | (P3) |
+; RXQ2.0 --->| |----->| |----->| |---> TXQ2.0
+; | | SWQ3 | | SWQ7 | |
+; RXQ3.0 --->| |----->| |----->| |---> TXQ3.0
+; |_____________________| |______________________| |_____________________|
+; | _|_ ^ _|_ ^ _|_ ^ _|_ ^
+; | |___|||___|||___|||___||
+; +--> SINK0 |___|||___|||___|||___||
+; (route miss) |__| |__| |__| |__|
+; TM0 TM1 TM2 TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
--- /dev/null
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
--- /dev/null
+; BSD LICENSE
+;
+; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; * Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; * Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in
+; the documentation and/or other materials provided with the
+; distribution.
+; * Neither the name of Intel Corporation nor the names of its
+; contributors may be used to endorse or promote products derived
+; from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; An edge router typically sits between two networks such as the provider
+; core network and the provider access network. A typical packet processing
+; pipeline for the upstream traffic (i.e. traffic from access to core
+; network) contains the following functional blocks: Packet RX & Firewall,
+; Flow classification, Metering, Routing and Packet TX. The input packets
+; are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+; (with variable number of labels per route).
+
+; A simple implementation for this functional pipeline is presented below.
+
+; Packet Rx & Pass-Through Flow-Classification Flow-Actions Routing
+: Firewall
+; __________ SWQ0 __________ SWQ4 __________ SWQ8 __________ SWQ12 __________
+; RXQ0.0 --->| |------>| |------>| |------>| |------>| |------> TXQ0.0
+; | | SWQ1 | | SWQ5 | | SWQ9 | | SWQ13 | |
+; RXQ1.0 --->| |------>| |------>| |------>| |------>| |------> TXQ1.0
+; | (P1) | SWQ2 | (P2) | SWQ6 | (P3) | SWQ10 | (P4) | SWQ14 | (P5) |
+; RXQ2.0 --->| |------>| |------>| |------>| |------>| |------> TXQ2.0
+; | | SWQ3 | | SWQ7 | | SWQ11 | | SWQ15 | |
+; RXQ3.0 --->| |------>| |------>| |------>| |------>| |------> TXQ3.0
+; |__________| |__________| |__________| |__________| |__________|
+; | | |
+; +--> SINK0 (Default) +--> SINK1 (Default) +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
--- /dev/null
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
--- /dev/null
+; BSD LICENSE
+;
+; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; * Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; * Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in
+; the documentation and/or other materials provided with the
+; distribution.
+; * Neither the name of Intel Corporation nor the names of its
+; contributors may be used to endorse or promote products derived
+; from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+; ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+; | |
+; RXQ1.0 --->|................|---> TXQ0.0
+; | Pass-through |
+; RXQ2.0 --->|................|---> TXQ3.0
+; | |
+; RXQ3.0 --->|................|---> TXQ2.0
+; |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
--- /dev/null
+; BSD LICENSE
+;
+; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; * Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; * Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in
+; the documentation and/or other materials provided with the
+; distribution.
+; * Neither the name of Intel Corporation nor the names of its
+; contributors may be used to endorse or promote products derived
+; from this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; _______________
+; RXQ0.0 --->| |---> TXQ0.0
+; | |
+; RXQ1.0 --->| |---> TXQ1.0
+; | Routing |
+; RXQ2.0 --->| |---> TXQ2.0
+; | |
+; RXQ3.0 --->| |---> TXQ3.0
+; |_______________|
+; |
+; +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; # Field Name Offset (Bytes) Size (Bytes)
+; 0 Mbuf 0 128
+; 1 Headroom 128 128
+; 2 Ethernet header 256 14
+; 3 IPv4 header 270 20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
--- /dev/null
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
git.droids-corp.org / dpdk.git / commitdiff