-/* \r
+/*\r
* Copyright Droids Corporation, Microb Technology, Eirbot (2005)\r
- * \r
+ *\r
* This program is free software; you can redistribute it and/or modify\r
* it under the terms of the GNU General Public License as published by\r
* the Free Software Foundation; either version 2 of the License, or\r
#define UART_CONFIG_H\r
\r
/*\r
- * UART1 definitions \r
+ * UART0 definitions\r
*/\r
\r
-/* compile uart1 fonctions, undefine it to pass compilation */\r
-#define UART1_COMPILE \r
+/* compile uart0 fonctions, undefine it to pass compilation */\r
+#define UART0_COMPILE\r
\r
-/* enable uart1 if == 1, disable if == 0 */\r
-#define UART1_ENABLED 1\r
+/* enable uart0 if == 1, disable if == 0 */\r
+#define UART0_ENABLED 1\r
\r
-/* enable uart1 interrupts if == 1, disable if == 0 */\r
-#define UART1_INTERRUPT_ENABLED 1\r
+/* enable uart0 interrupts if == 1, disable if == 0 */\r
+#define UART0_INTERRUPT_ENABLED 1\r
\r
-#define UART1_BAUDRATE 57600\r
+#define UART0_BAUDRATE 57600\r
\r
-/* \r
- * if you enable this, the maximum baudrate you can reach is \r
- * higher, but the precision is lower. \r
+/*\r
+ * if you enable this, the maximum baudrate you can reach is\r
+ * higher, but the precision is lower.\r
*/\r
-#define UART1_USE_DOUBLE_SPEED 1\r
-\r
-#define UART1_RX_FIFO_SIZE 64\r
-#define UART1_TX_FIFO_SIZE 127\r
-#define UART1_NBITS 8\r
+#define UART0_USE_DOUBLE_SPEED 1\r
\r
-#define UART1_PARITY UART_PARTITY_NONE\r
+#define UART0_RX_FIFO_SIZE 64\r
+#define UART0_TX_FIFO_SIZE 64\r
+#define UART0_NBITS 8\r
\r
-#define UART1_STOP_BIT UART_STOP_BITS_1\r
+#define UART0_PARITY UART_PARTITY_NONE\r
\r
+#define UART0_STOP_BIT UART_STOP_BITS_1\r
\r
/*\r
- * UART3 definitions \r
+ * UART1 definitions\r
*/\r
\r
-/* compile uart3 fonctions, undefine it to pass compilation */\r
-#define UART3_COMPILE \r
+/* compile uart1 fonctions, undefine it to pass compilation */\r
+#define UART1_COMPILE\r
\r
-/* enable uart3 if == 1, disable if == 0 */\r
-#define UART3_ENABLED 1\r
+/* enable uart1 if == 1, disable if == 0 */\r
+#define UART1_ENABLED 1\r
\r
-/* enable uart3 interrupts if == 1, disable if == 0 */\r
-#define UART3_INTERRUPT_ENABLED 1\r
+/* enable uart1 interrupts if == 1, disable if == 0 */\r
+#define UART1_INTERRUPT_ENABLED 1\r
\r
-#define UART3_BAUDRATE 57600\r
+#define UART1_BAUDRATE 57600\r
\r
-/* \r
- * if you enable this, the maximum baudrate you can reach is \r
- * higher, but the precision is lower. \r
+/*\r
+ * if you enable this, the maximum baudrate you can reach is\r
+ * higher, but the precision is lower.\r
*/\r
-#define UART3_USE_DOUBLE_SPEED 1\r
-\r
-#define UART3_RX_FIFO_SIZE 64\r
-#define UART3_TX_FIFO_SIZE 64\r
-#define UART3_NBITS 8\r
-\r
-#define UART3_PARITY UART_PARTITY_NONE\r
-\r
-#define UART3_STOP_BIT UART_STOP_BITS_1\r
+#define UART1_USE_DOUBLE_SPEED 1\r
\r
+#define UART1_RX_FIFO_SIZE 64\r
+#define UART1_TX_FIFO_SIZE 127\r
+#define UART1_NBITS 8\r
\r
+#define UART1_PARITY UART_PARTITY_NONE\r
\r
+#define UART1_STOP_BIT UART_STOP_BITS_1\r
\r
/* .... same for uart 1, 2, 3 ... */\r
\r