ethdev: add NSH key field to flow API

Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index ff6fb11..3428b65 100644 (file)
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1247,6 +1247,24 @@ Matches a PPPoE session protocol identifier.
    | ``mask`` | ``data`` | bit-mask applies to "spec" and "last" |
    +----------+----------+---------------------------------------+
 
+Item: ``NSH``
+^^^^^^^^^^^^^
+
+Matches a network service header (RFC 8300).
+
+- ``version``: normally 0x0 (2 bits).
+- ``oam_pkt``: indicate oam packet (1 bit).
+- ``reserved``: reserved bit (1 bit).
+- ``ttl``: maximum SFF hopes (6 bits).
+- ``length``: total length in 4 bytes words (6 bits).
+- ``reserved1``: reserved1 bits (4 bits).
+- ``mdtype``: ndicates format of NSH header (4 bits).
+- ``next_proto``: indicates protocol type of encap data (8 bits).
+- ``spi``: service path identifier (3 bytes).
+- ``sindex``: service index (1 byte).
+- Default ``mask`` matches mdtype, next_proto, spi, sindex.
+
+
 Actions
 ~~~~~~~
 

diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index cc03b15..62263ff 100644 (file)
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -80,6 +80,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
        MK_FLOW_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
        MK_FLOW_ITEM(PPPOE_PROTO_ID,
                        sizeof(struct rte_flow_item_pppoe_proto_id)),
+       MK_FLOW_ITEM(NSH, sizeof(struct rte_flow_item_nsh)),
 };
 
 /** Generate flow_action[] entry. */

diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index 391a44a..d1dcab8 100644 (file)
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -470,6 +470,13 @@ enum rte_flow_item_type {
         * See struct rte_flow_item_pppoe_proto_id.
         */
        RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+
+       /**
+        * Matches Network service header (NSH).
+        * See struct rte_flow_item_nsh.
+        *
+        */
+       RTE_FLOW_ITEM_TYPE_NSH,
 };
 
 /**
@@ -1307,6 +1314,38 @@ struct rte_flow_item_mark {
        uint32_t id; /**< Integer value to match against. */
 };
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_NSH
+ *
+ * Match network service header (NSH), RFC 8300
+ *
+ */
+struct rte_flow_item_nsh {
+       uint32_t version:2;
+       uint32_t oam_pkt:1;
+       uint32_t reserved:1;
+       uint32_t ttl:6;
+       uint32_t length:6;
+       uint32_t reserved1:4;
+       uint32_t mdtype:4;
+       uint32_t next_proto:8;
+       uint32_t spi:24;
+       uint32_t sindex:8;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_NSH. */
+#ifndef __cplusplus
+static const struct rte_flow_item_nsh rte_flow_item_nsh_mask = {
+       .mdtype = 0xf,
+       .next_proto = 0xff,
+       .spi = 0xffffff,
+       .sindex = 0xff,
+};
+#endif
+
 /**
  * Matching pattern item definition.
  *