}
/**
- * ixgbe_host_interface_command - Issue command to manageability block
+ * ixgbe_hic_unlocked - Issue command to manageability block unlocked
* @hw: pointer to the HW structure
- * @buffer: contains the command to write and where the return status will
- * be placed
+ * @buffer: command to write and where the return status will be placed
* @length: length of buffer, must be multiple of 4 bytes
* @timeout: time in ms to wait for command completion
- * @return_data: read and return data from the buffer (true) or not (false)
- * Needed because FW structures are big endian and decoding of
- * these fields can be 8 bit or 16 bit based on command. Decoding
- * is not easily understood without making a table of commands.
- * So we will leave this up to the caller to read back the data
- * in these cases.
*
* Communicates with the manageability block. On success return IXGBE_SUCCESS
* else returns semaphore error when encountering an error acquiring
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ * by the caller.
**/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
- u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+ u32 timeout)
{
- u32 hicr, i, bi, fwsts;
- u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u16 buf_len;
+ u32 hicr, i, fwsts;
u16 dword_len;
- s32 status;
- DEBUGFUNC("ixgbe_host_interface_command");
+ DEBUGFUNC("ixgbe_hic_unlocked");
- if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
- /* Take management host interface semaphore */
- status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-
- if (status)
- return status;
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
/* Check that the host interface is enabled. */
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if ((hicr & IXGBE_HICR_EN) == 0) {
+ if (!(hicr & IXGBE_HICR_EN)) {
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
- if ((length % (sizeof(u32))) != 0) {
+ if (length % sizeof(u32)) {
DEBUGOUT("Buffer length failure, not aligned to dword");
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto rel_out;
+ return IXGBE_ERR_INVALID_ARGUMENT;
}
dword_len = length >> 2;
}
/* Check command completion */
- if ((timeout != 0 && i == timeout) ||
+ if ((timeout && i == timeout) ||
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
ERROR_REPORT1(IXGBE_ERROR_CAUTION,
"Command has failed with no status valid.\n");
- status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto rel_out;
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ u16 dword_len;
+ u16 buf_len;
+ s32 status;
+ u32 bi;
+
+ DEBUGFUNC("ixgbe_host_interface_command");
+
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Take management host interface semaphore */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+ if (status)
+ return status;
+
+ status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+ if (status)
+ goto rel_out;
+
if (!return_data)
goto rel_out;
/* If there is any thing in data position pull it in */
buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
- if (buf_len == 0)
+ if (!buf_len)
goto rel_out;
if (length < buf_len + hdr_size) {
*
* Reads a 16 bit word from the EEPROM using the hostif.
**/
-s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
- u16 *data)
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
- s32 status;
+ const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM;
struct ixgbe_hic_read_shadow_ram buffer;
+ s32 status;
- DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
+ DEBUGFUNC("ixgbe_read_ee_hostif_X550");
buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
buffer.hdr.req.buf_lenh = 0;
buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
/* one word */
buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
- status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
- sizeof(buffer),
- IXGBE_HI_COMMAND_TIMEOUT, false);
-
+ status = hw->mac.ops.acquire_swfw_sync(hw, mask);
if (status)
return status;
- *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
- FW_NVM_DATA_OFFSET);
-
- return 0;
-}
-
-/**
- * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the hostif.
- **/
-s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
- u16 *data)
-{
- s32 status = IXGBE_SUCCESS;
-
- DEBUGFUNC("ixgbe_read_ee_hostif_X550");
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
- IXGBE_SUCCESS) {
- status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- } else {
- status = IXGBE_ERR_SWFW_SYNC;
+ status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT);
+ if (!status) {
+ *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ FW_NVM_DATA_OFFSET);
}
+ hw->mac.ops.release_swfw_sync(hw, mask);
return status;
}
s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
{
+ const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM;
struct ixgbe_hic_read_shadow_ram buffer;
u32 current_word = 0;
u16 words_to_read;
DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
/* Take semaphore for the entire operation. */
- status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ status = hw->mac.ops.acquire_swfw_sync(hw, mask);
if (status) {
DEBUGOUT("EEPROM read buffer - semaphore failed\n");
return status;
buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
- status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
- sizeof(buffer),
- IXGBE_HI_COMMAND_TIMEOUT,
- false);
+ status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT);
if (status) {
DEBUGOUT("Host interface command failed\n");
}
out:
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ hw->mac.ops.release_swfw_sync(hw, mask);
return status;
}